Jonsered Jonsereds 451 E EV Chainsaw Throttle Link
Part Name Throttle LInk Detailed Condition Description: good used condition Fits the Following Models: Jonsered 451 EV
(1 in stock)
Jonsered Jonsereds 361 Black Chainsaw Trigger Handle
Part Name: Trigger handle only. No trigger parts included.Part Description: In good used shape, no breaks-has some paint worn offFits the Following Models: Jonsered 361
Jonsered 910 Chainsaw Top Cover/Shroud
Part: top cover shroud. May vary in cosmetic design. Condition: good used working shape Fits: Jonsereds 910
(1 in stock)
Jonsered 80 Chainsaw Piston Ring 504 41 18-00 NEW (box R)
Part Number Part Description: piston ring Fits the Following Models: Jonsered 80. Also a Husqvarna K185 Cut off saw Condition Description: New old stock part.Never used. Item may be dusty/have a little bit of light surface rust from years of storage Location: Box R
(4 in stock)
Jonsered 80 601 Oil Pump O Ring PN 503-263004 NEW
For Jonsered ChainsawsPart Description: oil pump o ringPart Number: 503-263004Fits the Following Models: 80, 601Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
Jonsered 70E 70 E, 80, 910 Chainsaw Thrust Washer
Part Name: Jonsered Chainsaw thrust washerFits the Following Models: 70e, 80, 910
Jonsered 625, 630, 670 Chainsaw Starter Pawl, Stud & Spring Set
Set of starter pawls, studs and spring In good used shape Fits: Jonsered 625, 630, 670 Chainsaw
Jonsered 625, 630, 670 Chainsaw Oil Pickup Line Only
Oil pickup line only Good used shape with no breaks Fits: Jonsered 625, 630, 670 Chainsaw
Jonsered 625, 630, 670 Chainsaw inner Bumper Dawg/Spike #1
Bumper Dawg Good used shape Fits:Jonsered 625, 630, 670 Chainsaw part number 503 44 57-01
Jonsered 621 Chainsaw Piston, Rings, Pin, Bearing
Part Name: piston with rings, pin, bearing, keepersCondition Description: good used shape, not scoredFits the Following Models: Jonsered 621
Jonsered 621 Chainsaw Crankshaft Crank, Rod, Piston +
Removed from a Jonsered 621. Good used crank, rod and bearings, piston has a minor streak mark as visible in the picture.
Jonsered 621 80 70E Chain Protector PN 504-590004
For Jonsered ChainsawsPart Description: chain protectorPart Number: 504-590004Fits the Following Models: 621 80 70eDetailed Condition Description: minor surface rust, good shape
Jonsered 621 70E Chainsaw Clutch Shoe
Part Name: clutch shoe in good used shapeFits the Following Models: Jonsered 621, 70E
Jonsered 621 70E Chainsaw Clutch Carrier/rotor
Part Name: clutch carrier in good used shape Fits the Following Models: Jonsered 621, 70E
Jonsered 521E 521 E Chainsaw Crankcase Tank Shaft, Rod
Part Name: crankcase/tank with crankshaft, rod and studsCondition Description: in good used shape-no breaks-has scuffing/chippingFits the Following Models: Jonsered 521 E
(2 in stock)
Jonsered 520 Top Cover -- Engine Shroud #1
Top cover. Fits jonsered 520. In good used shape, hole melted by exhaust but still usable.
(1 in stock)
Jonsered 49SP 50 51 52 Flywheel Shroud 504 36 35-04 NEW
For Jonsered ChainsawsPart Number: 504 36 35-04Part Description: flywheel screenFits the Following Models: 49SP 50 51 52 52E, may fit some other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location:...
Jonsered 451E 451EV Wrist Pin/ Keepers 504 41 20-04 NEW
For Jonsered ChainsawsPart Number: 504 41 20-04Part Description: wrist pin & keepersFits the Following Models: 451E 451EVDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box X
Jonsered 451E 451 EV Chainsaw Air Box NEW
For Jonsered ChainsawsPart Description: air boxFits the Following Models: 451e 451ev, may fit some other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
(3 in stock)
Jonsered 451 E EV Chainsaw Rear Trigger Handle Bottom
Part Name: both halves which comprise the bottom of the rear trigger handle with rear mountCondition Description: in good used shape-no breaks-some scuffingFits the Following Models: Jonsered 451 E EVThis is a USED part, in good working order.
Jonsered 370 Chainsaw Chainbrake Brkae Handle, Band +
Chainbrake handle, band, spring-includes everything pictured. In good used shape. Fits jonsered 370.
Jonsered 361 Chainsaw Flywheel only
Part: flywheel only, does NOT include the pawls Condition: good used, working shape with no broken fins Fits: Jonsered 361
(4 in stock)
Jonsered 361, M36 Chainsaw Choke M-100092
Part: choke Part Number: M100092 Condition: good used, working shape Fits: Jonsereds M36, 361
(4 in stock)
Jonsered 361 Chainsaw Choke & Holder
Part: choke and holder set Part Number: M100092 and M100091 Condition: goood used/working shape Fits: Jonsered M36 and 361
(1 in stock)
Jonsered m36, 361 Chainsaw red rear Trigger Handle housing only (bare bones)
Part: red rear trigger handle cover-bare bones Condition: good used shape-has some paint loss Fits: Jonsered 36, 361
Jonsered 2077 Chainsaw Flywheel
Flywheel. In good shape not cracked or broken. Fits 2077 jonsered.
(1 in stock)
Jonsered 2040 Turbo Chainsaw Intake Manifold w/Boot
Part Name: intake manifold with bootDetailed Condition Description: good used shape with no breaksFits the Following Models: Jonsered 2040 TurboThis is a USED part, in good working order.
(2 in stock)
Jonsered 2040 Turbo Chainsaw Ignition Off Switch w/Wire
Part Name: Ignition Off Switch w/WireDetailed Condition Description: in good working shapeFits the Following Models: Jonsered 2040 TurboThis is a USED part, in good working order.
(1 in stock)
Jonsered 2040 Turbo Chainsaw Guide Bar Plate
Part Name: guide bar plateDetailed Condition Description: good used shape with no breaksFits the Following Models: Jonsered 2040 TurboThis is a USED part, in good working order.
Jonsered 2040 Turbo Chainsaw Bucking Spike/Dawg
Part Name: spike with bolts 530 01 43-81 Detailed Condition Description: good used shape with no breaks Fits the Following Models: Jonsered 2040 2036 Turbo. Husqvarna 36 41 136 141 142 137. Many Poulan, Poulan Pro, and Craftsman models. This is a USED part, in good working order.
Jonsered 2036 Turbo Chainsaw Starter Pulley Handle
Part Name: starter pulley handleFits the Following Models: Jonsered 2036 TurboThis is a USED part, in good working order.
(2 in stock)
Jonsered 2036 Turbo Chainsaw Intake Manifold Base, Boot
Part Name: intake manifold base and bootFits the Following Models: Jonsered 2036 TurboThis is a USED part, in good working order.
Jonsered 2036 turbo Chainsaw Engine crankcase bottom
Part Name: engine pan/bottom. PN 530-04979 Condition: good used/working shape Fits the Following Models: Jonsered 2036 Turbo
(3 in stock)
jonsered 630, 670 chainsaw air filter nylon new OEM 501 77 38 (JNAAB)
Part: nylon air filter Condition: New old stock from closed out dealer. Will be dusty/dirty from years of storage. Fits: Jonsereds 630, 670 and some other models. Note that there are several types of air filters for these saws so make sure this is the style you need prior to placing order.
(1 in stock)
jonsered 2054, 2055, 2051 turbo chainsaw air filter flocked new oem 503 67 85-01 (H-58)
Part: air filter - flocked felted Part # 503 67 85-01 Condition: new old stock from closed out dealer. A little dusty/dirty from years of storage. Fits: Jonsered 2054, 2055, 2051 turbo
(1 in stock)
jonsered 2054, 2055, 2051 turbo chainsaw air filter nylon new oem 503 67 85-01 (H-58)
Part: air filter - nylon Part # 503 67 85-01 Condition: new old stock from closed out dealer. A little dusty/dirty from years of storage. Fits: Jonsered 2054, 2055, 2051 turbo
(1 in stock)
jonsered 2171 turbo chainsaw brake arm lever pn 537 00 87-01 New (H-58)
Part: brake arm lever, part # 537 00 87-01 Condition: New old stock from closed out dealer. Has some surface rust from years of storage. Fits: Jonsered 2065, 2071, 2165, 2065, 2163 Turbo. Husqvarna 372, 371, 365, 372 XP, 372XP
(3 in stock)
Jonsered 625, 630, 670 chainsaw throttle trigger
Part: throttle trigger 501 51 80-01 Condition: Good used/ working shape Fits: Jonsered 625, 630, 670
(2 in stock)
jonsered 2051, 2054, 2055 turbo chainsaw throttle trigger new OEM 503 55 07-01 (H-66)
Part: throttle trigger Part # 503 55 07-01 Condition: New old stock from closed out dealer. Fits: Jonsered 2051, 2054, 2055 turbo
(4 in stock)
jonsered 510 520 sp chainsaw choke link guide grommet 504 84 31-07 (H66)
Part: choke link grommet guide Part # 504843107 Condition: New old stock from closed out dealer. Fits: Jonsered 510sp, 520sp, 450, 455, 525, 535
jonsered 920, 930 chainsaw throttle trigger new OEM 504 84 31-24 (H-66)
Part: throttle trigger Part # 504 84 31-24 504843124 Condition: New old stock from closed out dealer. Fits: Jonsereds 920, 930
(3 in stock)
jonsered 2077 and 2083 II turbo chainsaw throttle trigger new OEM 503 42 44 (H-66)
Part: throttle trigger Part # 503 42 44-02 5034244 Condition: New old stock from closed out dealer Fits: Jonsered 2083 II and 2077 turbo
jonsered 450 chainsaw tillotson hk 23E carburetor new old stock (J-02)
Part: Tillotson HK23E carburetor 504 80 04-16 Condition: new old stock from closed out dealer. Fits: Jonsereds 450, 510sp, 520sp
(1 in stock)
Jonsered 910 Chainsaw Tillotson Carburetor new OEM (J-02)
Part: tillotson carburetor HS199a, HS199 a 504 80 04-07 Condition: new old stock from closed out dealer Fits the Following Models: Jonsered 910e 910ev 910 e ev
(1 in stock)
jonsered 920, 930 chainsaw starter recoil cover and pulley assembly #2
Part: Plastic starter fan housing cover with pulley drum and rewind spring Part # 503 10 21-01, 503 10 24-01, and 501 52 04-02 Condition: good used/working shape, a little scruffy, no broken grills Fits: Jonsered 920, 930, 820, 830
jonsered 670 chainsaw piston and cylinder set (with boot type intake) #2
Part: 50mm bore piston and cylinder with bearing, wrist pin and keeper clip set 503 17 29-04 Condition: good used/working shape. Came off a saw with good compression (140 psi) Has broken fins Fits: Jonsered 670 and 625 models which have boot type intake
(1 in stock)
jonsered 670 champ chainsaw starter recoil cover and pulley assembly #1
Part: starter housing cover with pulley and spring Condition: good used/working shape Fits: Jonsereds 670 Champ
(1 in stock)
jonsered 670 chainsaw fuel tank rear trigger handle assembly for recirculating carbs #5
Part: fuel tank with the throttle trigger and safety and two lines and mounts. 501 77 27-04 Condition: good used/working shape with no leaks Fits: Jonsered 670 Chainsaws with recirculating carburetors
(1 in stock)
jonsered 670 chainsaw crankcase, crankshaft, rod #2
Part: crank case with crankshaft, rod Condition: good used/working shape. Has a small crack. Fits: Late model Jonsered 670 chainsaws which have cast key flywheels
(1 in stock)
jonsered 630 chainsaw crankcase assembly
Part: crank case tank housing with crankshaft and key. Condition: good used shape. Fits: Jonsered 630
(1 in stock)
jonsered 70e chainsaw piston kit new OEM 504 41 00-08 (upstairs)
Part: piston with ring, pin and retaining clips Condition: New old stock from closed out dealer. Fits: Jonsereds 70 E
(1 in stock)
Jonsered 920 54mm Chainsaw Piston Kit 503 08 15-01 NEW OEM (upstairs)
Piston kit with rings, wrist pin, and keepers. Jonsereds part number 503 08 15-01 NEW OEM from closed out dealer. Fits Jonsered 920 and 930 Series chainsaw with 54mm bore.
jonsered 455, 525, 535 chainsaw starter recoil cover only
Part: starter housing cover onlyPart of assembly # 503 12 38-02Condition: good used/working order Fits: Jonsereds 455, 525, 535
(1 in stock)
jonsered 2077 turbo chainsaw starter housing cover new old stock 503 55 35 01 (JN-Loose)
Part: starter / recoil cover. # 503 55 35-01 503553501 Condition: new old stock from closed out dealer. Has some scuffs from years of storage and may be a bit dusty. Fits: Jonsered 2077, 2083 turbo
(1 in stock)
jonsered 490, 590 chainsaw muffler exhaust gasket used
Part: gasket for the muffler Part # 505 27 21-22 Condition: good used/working shape Fits: Jonsered 490, 590 Husqvarna 50
(1 in stock)
Jonsered 2083 Chainsaw Crankshaft with bearing and key 506 08 86-03 new oem (upstairs)
Crankshaft, crank and rod assembly with wrist pin bearing and key. 506 08 86-03 5060886 506 08 86-01 New old stock from closed out dealer. Has some slight surface rust from years of storage. Fits Jonsered 2077, 2083 Turbo
jonsered 2077, 2083 chainsaw clutch side cover new oem 506 09 31 (JNAAB)
Part: clutch sprocket cover part number 5060931 Superseded to 503899702 503 89 97-02 Condition: new old stock from closed out dealer. Fits: Jonsered 2077, 2083
(2 in stock)
jonsered 490 chainsaw top cover screw 503 22 70-01 new (J-03)
Part: top cover / air filter cover screw slotted barrel nut Part # 503227001 Condition: new old stock from closed out dealer. May be dusty or have some slight oxidation from years of storage. Fits: Jonsereds 490
(1 in stock)
jonsered 52 & 52e chainsaw cylinder and intake manifold
Part: cylinder 44mm with intake manifold Condition: good used/working shape. Fits: Jonsereds 52 and 52e
(1 in stock)
Jonsered 625 Chainsaw 48mm Cylinder open port
48mm bore cylinder open port In good used shape Fits Jonsereds 625 Series
(2 in stock)
jonsered 670 chainsaw intake boot
Part: carb to cylinder intake manifold boot Part # 503 61 13-01 503 53 66 Condition: good used/working shape Fits: some models of Jonsereds 670 625 which have boot type intakes
(1 in stock)
jonsered 910 E, ev chainsaw cylinder
Part: 54mm bore cylinder Condition: good used/working shape. Fits: Jonsereds 910 E, EV, 910e, 910ev
(1 in stock)
jonsered 52 & 52e chainsaw cylinder
Part: cylinder 44mm Condition: good used/working shape. Fits: Jonsereds 52 and 52e
(1 in stock)
Jonsered 2077 Chainsaw cylinder gasket 503 42 86-01 (Upstairs)
Part Name: cylinder head gasket 503428601 - part of kit 503 43 83-01 Part Description: New old stock from closed out dealer. May have some oil on it as some have been leaked on over the years in storage. Fits the Following Models: Jonsered 2077 Poulan Pro PP425 PP445 PP505 425 445 505
(3 in stock)
Jonsered 2077 Chainsaw crankcase gasket 503 42 85-01 (Upstairs)
Part Name: crank case gasket 503428501 - part of kit 503 43 83-01 Part Description: New old stock from closed out dealer. May have some oil on it as some have been leaked on over the years in storage. Fits the Following Models: Jonsered 2077 Poulan Pro PP425 PP445 PP505 425 445 505
husqvarna 261, 262 chainsaw av spring mount kit
Part: av spring mount / antivibe elements for the tank, part # 503 51 48-01 Condition: good used/working shape Fits: Husqvarna 261, 262xp Jonsered 2077 2083 turbo
(1 in stock)
Jonsered 625 Chainsaw Crankcase Assembly 501 68 52-67 NOS (upstairs)
Crank case assembly includes: right clutch side case half, left flywheel side case half, and bearings. 501 68 52-67, 501 52 84-02 Does not include crankcase gasket New old stock from closed out dealer. There are a few chips to the paint and some maybe old oil that does not want to clean up. ...
(1 in stock)
Jonsered 670 chainsaw cylinder and piston kit (with boot type intake) new Mahle (upstairs)
Part: 50mm bore cylinder with piston, ring and clips. 503 17 29-04 Condition: new old stock from closed out dealer. Fits: Jonsered 670 and 625 models which have boot type intake
(1 in stock)
Jonsered 625 670 chainsaw wrist pin bearing and clips new (H-57)
Piston wrist pin bearing and clips 737 43 12-00, 503 73 39-01 new old stock from closed out dealer. Fits Jonsered 625, 670, 630 series and others
(1 in stock)
jonsered 525, 520sp, 535, 450, 455 chainsaw throttle trigger
Part: throttle trigger Part #505 27 92-30 Condition: good used/working order Fits: Jonsereds 520 sp, 525, 535, 450, 455
(1 in stock)
jonsered 625, 630 chainsaw muffler assembly type 4 (for spark arrestor) no bracket
Part: muffler assembly. Is equipped with the opening to take a spark arrestor. Condition: good used/working shape. Has a small piece of spark arrestor area missing. Fits: Jonsered 625, 630. Husqvarna 61, 266se, 266
(1 in stock)
#2 jonsered 49sp to 52e series and 70e chainsaw av buffer mount assembly for the lower, top handle bar #2 pn 504 12 50-01, 504 12 50-01 (49sp bin)
Part: av buffer mount for the handlebar Part # 504 10 13-00, 504 12 50-01, 504 06 53-05 Condition: good used/working shape, has slight bend in metal plate, otherwise useable. Fits: Jonsered 70 E, 49 sp, 50, 51, 52, 52e, 621
(1 in stock)
jonsered 2051, 2054, 2055 turbo chainsaw handle insert cover set
Part: rear handle cover/insert set with hardware as shown. Condition: good used/working shape Fits: some Jonsered 2051, 2054, 2055 turbo
jonsered 2051, 2054 turbo chainsaw top cover set type 2
Part: top cover engine shroud, part # 503 18 17-03, air filter cover 503 18 18-04 Condition: good used/working shape Fits: Jonsered 2054, 2051 turbo
(1 in stock)
Husqvarna 372xp chainsaw muffler new oem 544 02 97-02 (A5)
Part: muffler 503 76 54-02, 544 02 97-02 Condition: new old stock from closed out dealer. Fits: Husqvarna 365, 365sp, 362xp, 362, 371, 371xp, 372, 372xp xp Jonsered 2171, 2071, 2065, 2063, 2163, 2165 turbo
(2 in stock)
jonsered 2050, 2045 turbo chainsaw flywheel fan cover pn 503 62 60-01 new oem (HVA 1000)
Part: flywheel fan shroud cover 503626001 Condition: New old stock from closed out dealer. Dusty from years of storage. Fits: jonsered 2045, 2050 turbo
(1 in stock)
Jonsered 2055 turbo chainsaw piston and cylinder set #2 open port
Part: 46mm bore piston and cylinder with ring, wrist pin, keeper clip set. 503 89 93-02 Condiition: good used/working shape. Came off a saw with good compression, no scoring of the cylinder. Fits: Jonsered 2055 2051 2054 turbo With no compression release valve.
jonsered 2095 turbo chainsaw muffler screw 725 53 85-55 New aftermarket (H21)
Part: muffler bolt m6 x 75 Part # 725538555 Condition: new high quality aftermarket Fits: Jonsered 2094 2095 turbo
(1 in stock)
Jonsered 451E Chainsaw Piston and Cylinder Set new OEM (upstairs)
Top end motor kit includes: cylinder head, piston, ring, wrist pin, and intake manifold. 504 42 00-13 New old stock from closed out dealer. Dusty from years of storage. Fits Jonsered Jonsereds 451e 451ev 451 e ev
(1 in stock)
Jonsered 930 Chainsaw Cylinder used
54mm bore cylinder In good used shape. One top fin is cracked. Fits Jonsereds 920 930 and others
(1 in stock)
Jonsered 930 Chainsaw 54mm Cylinder new OEM Mahle (upstairs)
54mm bore cylinder New old stock from closed out dealer Fits Jonsereds 920 930 and others
(1 in stock)
Jonsered 2171 2071 Turbo Chainsaw Top & Air Filter Cover new old stock 503 70 08-06 #2 (JN-AAB)
Top cover and air filter cover combo missing one clip. 503 70 08-06, 503 69 60-01 New OEM old stock from closed out dealer. May be dusty/dirty from years of storage. Fits: some models of jonsered 2071 turbo 2063 2171 2163 - these models have a one piece type and a 2 part type
(1 in stock)
Jonsered 2051, 2054, 2055 Turbo Chainsaw Throttle Safety Lever new oem 506 08 65-04 (H-18)
Part Name: throttle safety lever interlock. Part # 506086504 Condition: new old stock from closed out dealer. Fits: Jonsered 2051, 2054, 2055 Turbo
(4 in stock)
Husqvarna 372 Chainsaw Rubber Carburetor Support Piece new oem 503 67 86-01 (H-18)
Carburetor support 503 67 86-01 new old stock from closed out dealer. Husqvarna 372, 371, 365, Jonsered 2171, 2165
(1 in stock)
Jonsered CS2255 chainsaw top wrap handle bar used
Part: top wrap handlebar Part # 501 98 72-01 Condition: good used shape. Some dings and scratches. Fits: Jonsered CS 2255 CS-2255
(1 in stock)
Jonsered 2171 2071 Turbo Chainsaw Top & Air Filter Cover new old stock 503 70 08-06 (JN-AAB)
Top cover and air filter cover combo 503 70 08-06, 503 69 60-01 New OEM old stock from closed out dealer. May be dusty/dirty from years of storage. Fits: some models of jonsered 2071 turbo 2063 2171 2163 - these models have a one piece type and a 2 part type
(1 in stock)
jonsered 2071 turbo chainsaw top cover engine shroud 503 69 58 new OEM (JN-AAB)
Part: top cylinder cover shroud 5036958 Condition: New old stock from closed out dealer. Dusty from years of storage. Fits: some models of jonsered 2071 turbo 2063 2171 2163 - these models have a one piece type and a 2 part type
(1 in stock)
jonsered 2054, 2055 turbo chainsaw starter fan housing cover pn 503 67 83-01 (JN-ABB)
Part: starter / recoil housing cover Part # 503 67 83 01 Condition: New old stock from closed out dealer. May be dusty/dirty from years of storage. Fits: Jonsered 2054, 2055 turbo
(1 in stock)
jonsered 2150 turbo chainsaw starter assembly new OEM 503 96 04-01 (JN-AAB)
Part: starter recoil housing cover with pulley, rewind spring and grip 503 96 04-01 Condition: New old stock from closed out dealer. Dusty/dirty from years of storage. Fits: Jonsered 2150, 2145, 2141, 2152, 2149, 2153 turbo
(1 in stock)
Jonsered 490, 590 Chainsaw wire lead shorting cable
Part: wire lead shorting cable PN 503 12 97-01 Condition: Good used/working shape Fits: Jonsered 490, 590.
(1 in stock)
Jonsered 490 Chainsaw Fuel Cap 504 70 20-03
Fuel/gas cap and o-ring. 504702003 superseded to 503 12 50-02 good used shape Fits Jonsereds models: 490 590
(3 in stock)
jonsered 920 chainsaw air filter cover and nut new OEM (Jons bulky)
Part: air filter cover and nut 504 02 47-08 504 60 20-48 Condition: New old stock from closed out dealer. Dusty from years of storage. Fits: Jonsereds 920
(1 in stock)
jonsered cs-2159 turbo chainsaw starter recoil cover only new oem 537 00 98-01 (jons bulky)
Part: starter housing cover Part # 537 00 98-01 Condition: new oem old stock from closed out dealer. Dusty from years of storage. Location: Jonsered CS 2159 Turbo
(1 in stock)
jonsered 490, 590 chainsaw handle hardware part # 505 27 92-11 new (j-4)
Part: handle hardware part Part # 505 27 92 11 Condition: New old stock from closed out dealer. Fits: Jonsered 490, 590
(2 in stock)
Jonsered 2077 Turbo Chainsaw Oil cap new 501 62 66-01 type 2 (A1101)
Bar oil tank filler cap assembly 501626601 New old stock from closed out dealer. Fits Jonsered 2077 2083 Turbo Husqvarna 238
(2 in stock)
jonsered 2071, 2171, 2065 turbo chainsaw hand guard handle new OEM 503 81 18 (Jons bulky)
Part: chainbrake hand guard brake handle Part # 503811801 Condition: New old stock from closed out dealer Fits: Jonsered 2071, 2171, 2065, 2063, 2165 turbo
husqvarna 362 to 372 & jonsered 2063 to 2171 series chainsaw flywheel cover new oem pn 503 62 83-01 (hab3)
Part: flywheel cover shroud/starter gasket segment. Replaces Husky part # 503 62 83 01 Condition: new OEM from closed out dealer. Fits: Husqvarna 362, 365, 371, 372 372xp 371xp & Jonsered 2063, 2065, 2165, 2071, 2171 Turbo.
(1 in stock)
jonsered 2083, 2077 turbo chainsaw air filter cover new OEM 503 43 31 (HAB1)
Part: air filter cover, part # 503 43 31-12 Condition: New old stock from closed out dealer. Dusty from years of storage. Fits: Jonsered 2083, 2077 turbo
(1 in stock)
Jonsered 2040 Turbo Rear Throttle Trigger Handle half
Part Name: rear throttle trigger handle half 530 03 61-30 Detailed Condition Description: good used shape with no breaks Fits the Following Models: Jonsered 2040, 2036 Turbo