husqvarna 359, 357 xp chainsaw flywheel side crankcase half
flywheel side case half good used working condition fits husqvarna 359, 357xp
husqvarna 350 chainsaw crankcase tank chassis (non primer type)
Part: crank case tank chassis housing Condition: good used/working shape. Fits: came off a Husqvarna 350, will also fit 345, 340
(1 in stock)
jonsered 2050 turbo chainsaw crankcase tank housing
Part: crank case engine housing tank, chassis makes up gas and oil tank both. Bare bones Condition: good used/working order with no leaks Fits: come off a Jonsered 2050 turbo, should also fit 2041, 2045 turbo
jonsered 2171 2165 turbo chainsaw crankcase half with bar stud set
Part: crank case half, right clutch side, with bar stud set Condition: good used/working shape Fits: jonsered cs2171 turbo cs2165 will not fit cs2172 or cs2166
stihl 046 chainsaw crankcase half (right, clutch side)
Part: right (clutch side) of the crank case housing Condition: good used/working shape, some wear on casings and some of the threaded holes for the spike and covers may need helicoils. Fits: Stihl 046, MS460, MS 460 Magnum
Stihl MS362 Chainsaw Clutch Side Crankcase Half
PTO clutch side crank case half casting 1140 020 2904 In good used shape Fits Stihl MS-362
husqvarna 385xp chainsaw crankcase housing assembly
Part: crank case housing cases - both halves Condition: good used/working shape Fits: husqvarna 385 xp
husqvarna 372 chainsaw crankcase housing half only (right, clutch side)
Part: crank case housing half, right, clutch cover Condition: good used/working shape Fits: husqvarna 372 365 371 xp 372xp 371xp 365sp
(1 in stock)
jonsered 2054 turbo chainsaw crankcase tank
Part: crank case tank with bar stud set 503 18 24-07 Condition: good used/working shape with no leaks, has some chain marks and hard crusty pitch build up on it, didn't want to use solvent because it does not leak! Fits: Jonsered 2054 2055 2051 Turbo
stihl 044 av chainsaw crankcase half clutch side #2
Part: clutch side of the crank case half Condition: good used/working shape Fits: some models of Stihl 044 AV
husqvarna 359, 357 xp clutch side crankcase half
husqvarna 359,357xp clutch side crank case half does not include bearing or seal good used working condition some scratching wear. Good threads, no chips and cracks. fits husqvarna 359, 357xp
Husqvarna 365 Chainsaw Flywheel side case half
Flywheel left side crankcase half. In good usable used shape Fits Husqvarna 362sp, 365sp, 365 sp special, 362, 365, 371, 372 xp, 371xp, 372xp
Stihl MS362 Chainsaw flywheel Side Crankcase Half
Flywheel ignition side crank case half casting 1140 020 2611 In good used shape Fits Stihl MS-362
stihl 044av chainsaw crankcase half flywheel side
Part: flywheel side crankcase case half 1128 021 0760. Screw type filler cap. Condition: good used/working shape Fits: Stihl 044 AV Magnum
husqvarna 575xp chainsaw crankcase half, right clutch side
Part: right clutch side of the crank case housing with bar stud / bolt set Condition: good used/working order Fits: Husqvarna 575 xp, 570
(3 in stock)
husqvarna 338xpt chainsaw engine crankcase housing with bar bolt
Part: crank case housing with bar stud / bolt Condition: good used/working shape. May not include grommet. Fits: Husqvarna 338 xpt, 335xpt, 335 334t 334t
stihl ms441 chainsaw crankcase chassis and crankshaft
Part: crank case tank chassis with guide bar bolt set, crankshaft, and connecting rod Condition: good used/working shape Fits: stihl ms441 ms 441 Magnum
stihl 046 chainsaw crankcase half (left, flywheel side)
Part: crank case tank half. Bare bones, does not have bearing etc. Condition: good used/working shape Fits: stihl 046 046AV 046 AV Magnum
Husqvarna 346xp chainsaw crankcase half, left flywheel side
Part: crank case chassis half, left flywheel side Condition: good used/working shape Fits: Husqvarna 346 xp
Stihl MS440 Chainsaw Clutch side Crankcase Half
Clutch PTO right side crank case half only. Half of 1128 020 2122 In good used shape. Fits Stihl MS 440 Magnum
(1 in stock)
mcculloch 3200, 32cc chainsaw shortblock - piston and cylinder assembly
Part: piston and cylinder with crankshaft, rod, crankcase engine housing, intake manifold Condition: good used/working order. Came off a saw with good compression Fits: McCulloch Mac 32cc chainsaw
homelite 240 chainsaw crankcase with bar studs
Part: crank case housing with guide bar bolt / stud set Condition: good used/working shape Fits: homelite 240
skil 16 series chainsaw crankcase and bar stud
Part: crank case housing with bar stud Condition: good used/working shape Fits: many skil 16 series model chainsaws, such as skil 1616, 1614,1610, 1612. May also fit equivalent Partner models
husqvarna 575 xp chainsaw crankcase half
Part: left (flywheel side) crank case tank half Condition: good used/working shape Fits: Husqvarna 575xp, 570
husqvarna 350 chainsaw crankcase tank chassis (equipped to take primer)
Part: crank case tank chassis with bar stud set Condition: has some minor melt marks, in good used/working order with no leaks Fits: Husqvarna 350 models which have primers
husqvarna 346xp chainsaw crankcase half, right clutch side with bar stud set
Part: crank case chassis half, right clutch side with set of bar studs/bolts Condition: good used/working shape Fits: Husqvarna 346 xp, 353
husqvarna 394 chainsaw crankcase half (right, clutch side)
Part: crank case housing half Condition: Some oxidation and staining. Good thread holes, and in good usable shape. Fits: Husqvarna 394, 395xp
dolmar ps-540 chainsaw crankcase with crankshaft assembly
Part: crank case housing with crank shaft and connecting rod Condition: good used/working shape Fits: Dolmar ps540 / ps 540, Later model 115 115i 111 111i 109 110
husqvarna 141 chainsaw oil tank crankcase chassis #2
Part: crankcase oil tank. Includes the bar stud set. Bare bones otherwise. Condition: good used/working shape with no breaks or leaks. Fits: Husqvarna 141
jonsered 2150 turbo chainsaw crankcase tank
Part: crank case chassis oil tank 503 85 15-03 Condition: good used/working shape-no leaks, minor cosmetic melted areas. Fits: Jonsered 2150 2145 2141 Turbo
Efco 152 Chainsaw Oil Tank Chassis 50070114BR NEW
Oil tank chassis crankcase crank case. 50070114 BR NEW take off from brand new disassembled saw Fits Efco 147 152
Stihl ms441 chainsaw right clutch crankcase half
Part: crank case half, right PTO clutch side, with guide bar bolt set 1138 020 2960 Condition: good used/working shape Fits: stihl ms441 ms 441 Magnum
Stihl MS180 Chainsaw Tank and Engine Housing Chassis
Engine housing chassis. 1130 020 3001, 1130 020 3002, 1130 021 0801 In good used shape, pitchy/dirty Fits Stihl 017 018 MS170 MS180
Stihl 064 Chainsaw Crankcase
Crankcase. Both left flywheel side, and right clutch side. 1122 020 2101. Crankshaft and bearings complete. In good used shape Fits Stihl 064AV 064 AV Magnum
husqvarna 394xp 395xp chainsaw Inner Bucking Spike Assembly
Part: Inside spike dog with chain catcher 503 47 00-01, 503 47 05-01 Condition: In good used shape. Fits: Husqvarna 394xp, 394 395 xp, 395xp
husqvarna 445, 450, 445e, 450e chainsaw crankcase tank chassis housing with bar studs
Part: crank case tank chassis housing with bar studs and 3 clip holders Condition: good used/working order Fits: Husqvarna 445, 450, 445e, 450e
husqvarna 372 chainsaw crankcase half with bar stud set (Right, clutch side)
Part: crank case chassis housing half with set of bar studs / bolts Condition: good used/working shape Fits: Husqvarna 372
Stihl 009 chainsaw crankcase assembly
Part: crankcase housing with crank shaft, connecting rod and bar stud Condition: good used/working shape Fits: Stihl 009
stihl 029, 039 chainsaw crankcase engine pan
Part: crankcase engine pan, part # 1127 021 2500 Condition: good used/working shape Fits: stihl 029, 039
husqvarna 281 chainsaw crankcase housing half (right, clutch side)
Part: right clutch side of the crank case housing half with bar stud/bolt set Condition: good used/working shape Fits: Husqvarna 281 288 281se 281xp 288xp lite xp etc.
(1 in stock)
husqvarna 266 chainsaw crankcase spacer
Part: crankcase seal / spacer part number:501 52 82-01 501 80 49 Condition: good used/working shape Fits: husqvarna 266 se 266se
husqvarna 266se chainsaw left, flywheel side crankcase half
Part: crank case half (left, flywheel side) Condition: good used/working shape. Has some minor chipping. Fits: Husqvarna 266 se
husqvarna 281, 288 chainsaw rubber bellows
Part: throttle thru crankcase rubber bellows grommet. Pn 501 91 67-02 Condition: good used/working shape Fits: Husqvarna 281, 288, 288xp
husqvarna 55 chainsaw complete crankcase
Part: crank case, both engine housing halves with bar stud set and crankshaft. Part numbers 503 57 38-06, 501 76 22-02 Condition: good used/working shape Fits: Husqvarna 55, 55 rancher
(2 in stock)
husqvarna 50, 51, 55 chainsaw clutch side crankcase half
Part: clutch side crank case half Condition: good used/working shape Fits: Husqvarna 50, 51, 55
stihl 015 L chainsaw crankcase
Part: crank case / tank housing Condition: good used/working shape Fits: Stihl 015 L and 015 (does NOT fit av models)
McCulloch SP 80 Chainsaw Oil Tank Crankcase
Part Name: oil tank- crank case housing with bar stud / bolt set Condition Description: in good used/working order. Has some minor oxidation Fits the Following Models: McCulloch SP-80, Super Pro 80
Jonsered 2171 Turbo Chainsaw Crankcase Assembly
Crank case with both case halves, crankshaft, bearings, and seals. In good used shape with good crankshaft and bearings. Seals may or may not need to be replaced. Fits Jonsered 2065 2165 2071 2171 Turbo
husqvarna 394 chainsaw crankcase half (left, flywheel side)
Part: crank case housing half Condition: Some oxidation and staining. Good thread holes, and in good usable shape. Fits: Husqvarna 394, 395xp
Dolmar 120si Chainsaw Complete Crankcase Assembly
Crank case assembly with crankshaft bearings and seals. 030 120 010, 030 111 010, 030 111 060 In good used shape Fits Dolmar 116si, 120si, 6000i, 6800i
Stihl MS460 Chainsaw flywheel side case half
Left flywheel side crankcase half. In good used shape Fits Stihl MS460, MS 460
Husqvarna 262 XP chainsaw flywheel side case half
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape Fits Husqvarna 262, 262xp, and 261
husqvarna 268 chainsaw crankcase half (left side)
Part: crank case half, left flywheel side Condition: good used/working shape Fits: Husqvarna 268
husqvarna 254, 154, 262 chainsaw seal retainer with screws
Part: seal retainer with o ring and screws Part # 501 87 24-01, 740 48 27-02, 501 49 76-01 Condition: good used/working order Fits: Husqvarna 154, 254, 262
husqvarna 357xp chainsaw complete crankcase with crankshaft and rod assembly
Part: crank case engine housing with crankshaft and connecting rod 503 92 53-71 Condition: good used/working order Fits: Husqvarna 357 xp xpg, and can be used on 359 as well.
stihl ms361 chainsaw crankcase half and bar stud set
Part: clutch PTO side crank case housing half with bar stud set Condition: good used/working order Fits: Stihl MS 361
stihl 036 pro chainsaw right, clutch side crankcase half
Part: crank case half, right clutch side, with guide bar bolt / stud set Condition: good used/working order Fits: Stihl 036 pro. 036av, 036 AV, 034av, 034 AV Super
husqvarna 136 chainsaw crankcase chassis tank housing
Part: crank case tank housing chassis with bar stud set Condition: good used/working shape Fits: Husqvarna 36
stihl 032 av chainsaw crankcase chassis with crankshaft and rod
Part: crank case tank chassis housing with crankshaft and rod Condition: good used/working shape Fits: Stihl 032av
husqvarna 61 chainsaw seal retainer plate used
Part: seal retainer plate Part # 501 52 82-01 Condition: good used/working shape Fits: Husqvarna 61
Jonsered 455 chainsaw crankcase tank Assembly
Part: crank case engine housing gas, bar oil and fuel tank chassis with bar stud / bolt set 503 40 07-01 Condition: good used/working shape Fits: Jonsereds 455, 535, 525, 450
husqvarna 41 chainsaw crankcase chassis with bar stud set
Part: crank case chassis oil tank housing with set of bar studs/bolts. 530069942, 530-069942, 530 06 99-42 Condition: good used/working shape. Has a melted section as pictured, no leaks. Fits: Husqvarna 41 36 136 141
stihl 031 av chainsaw crankcase half, left flywheel side
Part: left, flywheel side of the crank case housing - bare bones Part # 1113 021 0701 Condition: good used/working shape Fits: Stihl 031 av
(1 in stock)
husqvarna 136, 141 chainsaw crankcase cap
Part: crank case engine pan cap Part # 530028706 Condition: good used/working shape Fits: Husqvarna 136, 141
homelite super xl 925 chainsaw crankcase tank with bolts
Part: crank case gas and oil tank assembly with bolt set Part # A-68023-B Condition: good used condition Fits: Homelite Super XL 925
pioneer p50 to p64 chainsaw right side crankcase half
Part: crank case half with bar stud set. Part # 475164 Condition: In good used shape Fits: came off a P50, will aslo fit P51, P60, P61, P62
(2 in stock)
stihl 028 chainsaw clutch side crankcase half
Part: crank case engine housing half with bar stud/bolt set Condition: good used/working shape Fits: Stihl 028
(1 in stock)
stihl 028 chainsaw left flywheel side crankcase half
Part: crank case engine housing Condition: good used/working shape Fits: Stihl 028
Husqvarna 266 Chainsaw Right Crankcase Crank Case Half #2
Part: clutch side crank case half, bare bones Condition: good used/working shape. Has some chipping. Fits: Husqvarna 266
echo cs-750evl chainsaw crankcase half #1
Part: left flywheel side crank case half #1 Fits: Echo CS 750evl / 750 702 602 evl 702vl 602vl Condition: good used/working shape.
Husqvarna 181 Chainsaw crankcase case half, clutch side
Part: Clutch side crankcase half. Includes bar studs Condition: Good used/ Working Condition Fits: Husqvarna 181
homelite 450 chainsaw crankcase & guide bar bolt set
Part: crank case housing with pair of bar bolts Condition: good used/working shape Fits: Homelite 450
jonsered 2071 turbo chainsaw left crankcase half
Part: left, flywheel side, crank case half Condition: good used/working shape Fits: Jonsered 2071 Turbo
jonsered 2071 turbo chainsaw right crankcase half #1 with bar studs
Part: right, clutch side, crank case half with bar studs Condition: good used/working shape Fits: Jonsered 2071 Turbo
McCulloch Pro Mac 610, 605, 650 3.7 Timber Bear Chainsaw Crankcase Pan
Part: 3.7 Timber Crank Case Pan Condition: Good used/working shape Fits: McCulloch Pro Mac 610, 605, 650
(2 in stock)
Jonsered 510 SP Chainsaw crankcase tank assembly
Part: crank case tank assembly Condition: good used / working shape, no breaks Fits: Jonsered 510sp
Stihl MS261c Chainsaw Crankcase Assembly #2
Complete crank case includes: crankshaft and rod assembly, crankshaft bearings, seals, left flywheel side case, and right clutch side case, bar studs In good used shape. Has some wear from the chain and still very funcitonal. Fits Stihl MS 261 MS 261 C
jonsered 2171 2165 turbo chainsaw crankcase half flywheel side
Part: crank case half, left flywheel side Condition: good used/working shape Fits: jonsered cs2171 turbo cs2165
Dolmar PS-7910 Chainsaw Flywheel Side Crankcase
Left, flywheel side crank case half 038111160, 038 111 160 In good used shape Fits Dolmar PS7900 PS7300 PS7910 PS7310 PS 6400 PS6400 6400c 7300 7900 7310 7910
Dolmar PS-7910 Chainsaw Clutch Side Crankcase Assembly 038 111 270 NEW (DB-2)
Right, clutch PTO side crank case half with bearing. 038111270 NEW Fits Dolmar PS7900 PS7300 PS7910 PS7310 PS 7300 7900 7310 7910 6400 PS6400 PS6400c PS 6400c
Husqvarna 288xp Chainsaw Crankcase Assembly
Crankcase assembly includes: both left flywheel side, and right PTO clutch side case halves, and crankshaft. In good used shape with no big cracks or chunks broke off. Good threads in the bolt and screw holes. Bearings and seals in the case look very good but can't be guaranteed. Fits Husqv...
Husqvarna 385xp Chainsaw Clutch Side Case Half
Clutch PTO side crankcase half. In good used shape Fits Husqvarna 385 390 xp 385xp 390xp
Jonsered 2159 turbo chainsaw crankcase half (Right, clutch side)
Part: Right, clutch PTO side of the crank case housing Condition: good used/working shape Fits: jonsered 2159 turbo
Husqvarna 346xp Chainsaw Crankcase Only
Crankcase only includes:left flywheel side case half, and right clutch side case half. In good used shape Fits Husqvarna 346XP, 353. Has boss for attaching primer on 2008+ model year saws.
Husqvarna 346xp Chainsaw Crankcase Assembly
Crankcase includes: crankshaft, crank bearings, left flywheel side case half, right clutch side case half. In good used shape Fits Husqvarna 346XP, 353
Poulan Pro 365 Chainsaw Crankcase Assembly
Crankcase assembly includes: both case halves left flywheel side and right clutch side, crankshaft with rod and bearings, bearings, and seals. 530069893, 530-069893, 530027143, 530-027143 In good used shape Fits Poulan Pro 365 380
Husqvarna 576xp chainsaw crankcase assemby
Part: Crankcase assembly with left flywheel side, right pto clutch side, crankshaft and bearings. 544 89 66-02 Condition: good used/working order Fits: Husqvarna 576 xp only
Jonsered 2077 Turbo Chainsaw Crankcase Assembly
Crankcase assembly with both case halves, crankshaft. 503 42 00-10 In good used shape Fits Jonsered 2077 2083 Turbo
Stihl 084 AV Chainsaw Clutch Side Case Half
Right hand PTO clutch side crankcase half. One side of 1124 020 2105 In good used shape Fits Stihl 084AV
Husqvarna 385xp chainsaw crankcase and crankshaft assembly
Part: crank case housing cases - both halves - and crankshaft with bearings Condition: good used/working shape, chip on lower front edge of case Fits: husqvarna 385 xp
Stihl MS360 Chainsaw Crankcase
Crank case. Left and right sides. Clutch and Flywheel sides. 1125 020 2120 In good used shape Fits MS360
Husqvarna 272xp Chainsaw Crankcase Assembly
Crank case with crankshaft, and both case halves. Crankshaft for woodruff key type flywheels. Case for 1pc ignition coil systems. 501 77 99-01, 501 52 84-02 In good used shape, may or may not need new seals. Fits Husqvarna 61, 268, 272 xp SN# 107001 - 3481259
Stihl MS361 Chainsaw Crankcase Assembly
Crankcase with both case halves, crankshaft, and bearings. 1135 020 2601 In good used shape Fits Stihl MS 361
Pioneer P-41 Chainsaw Crankcase and Tank assembly
Crank case with gas fuel, and bar oil tanks, and crankshaft assembly. Includes: 430925, 430190, 474958, 475190, 431266 In good used shape Fits Pioneer P41 P42 P45 and others
Dolmar PS-7910 Chainsaw Flywheel Side Crankcase Assembly 038 111 160 NEW (DB-2)
Left, flywheel side crank case half with bearing. 038111160 NEW Fits Dolmar PS7900 PS7300 PS7910 PS7310 PS 7300 7900 7310 7910
stihl 066 chainsaw clutch side crankcase half
Part: right clutch side crank case housing half, bare bones Condition: usable used shape, one small chip on front lower corner as pictured Fits: stihl 066 early
Husqvarna 2100 CD chainsaw clutch side case half
Crankcase half. Right, clutch PTO side. One side of 501 56 92-04 In good used shape Fits Husqvarna 2100cd 285CD 285 CD and others
Stihl 045av Chainsaw Crankcase Half Clutch Side (old style)
Clutch side case half casing 1115 020 2902 In good used shape Fits Stihl 045av 056 AV 045 AV Super etc with the OLD style oil pump (see picture where oil pump bolts on)
Husqvarna 262 XP chainsaw clutch side case half
Crankcase half. Right, clutch side. One side of 501 86 00-04 In good used shape Fits Husqvarna 262, 262xp, 261 and 257