Chainsawr Piston and Cylinder Kits

Sort by

The Chainsawr's aftermarket piston and cylinder kits are the perfect combination of quality and economy.

Every one of our kits is produced to our higher than standard specifications and inspected by us for correct fitment and quality.

We have used and installed every make and model combination we carry on our own saws and repairs here at the shop to absolutely verify that they work and fit well.

The quality of the cut, cast iron rings on our pistons and sold individually is equal to OEM from any premium manufacturer.

-------------------------------------------------------------------------------------------------------

We feel there are 2 problems that affect aftermarket parts in general but especially cylinders.

#1: Tons of them are made wrong, and sold retail by people who have no idea what they are looking at or how to test it, so the customer ends up with a part that doesn't work. We have tried and regularly use everything we sell and screen every cylinder we go through personally for problems, so we don't have that issue. We have literally recycled hundreds of incorrectly made brand new parts here over the years in our screening and testing of new products.

#2 Most aftermarket parts are sold directly to consumers, not to trained dealers who are knowledgeable about servicing the product. For example, say your top end got scored because the carburetor is set too lean and your fuel filter is plugged. Many consumers who would just buy an aftermarket top end kit and throw it in to fix the problem don't know enough to troubleshoot and fix the underlying problem. So, the new parts score again. Then the untrained consumer blames it on the new parts, and the aftermarket parts gain undeserved bad reputation. Be sure to correct the problem that caused the top end to score in the first place!

45mm diameter, top end motor kit includes: piston, ring, wrist pin, bearing, and keeper clips, cylinder head. 537253104 New part from closed out dealer Fits Husqvarna model 353 chainsaw, but will fit on 346 XP, 350, 350, 350 EPA, 351, 351 EPA

View

PART: PISTON AND CYLINDER W/ RING, WRIST PIN, CLIPS. 503 16 49 01 Condition: NEW OEM, FROM CLOSED OUT DEALERSHIP FITS: JONSEREDS 510, 520

View

Part: 44mm Bore piston and cylinder with ring and wrist pin Part # 503869971 Condition: new, old stock from closed out dealer. Fits: Husqvarna 350 and Jonsered CS 2150 turbo. Will retrofit onto Husqvarna 346xp, 351, 353 & Jonsered 2149, 2152, 2153

View

Part: piston and cylinder kit - includes the rings, wrist pin, keeper clips and base gasket Part # 50082012, 50070047a, 50082012B Condition: new Fits: Efco 152 and 952 Location: new efco bin2

sale

View

52mm Bore, top end motor kit includes: cylinder head, piston, rings, wrist pin and keeper clips. 1128 020 1250 New AFTERMARKET part Fits Stihl MS461 MS461c MS 461

View

Top end motor kit includes: cylinder head, piston, rings, wrist pin and keeper clips. 1145 020 1200 New AFTERMARKET part Fits Stihl MS201 t MS201t MS 201t 201 t

View

52mm Bore, top end motor kit includes: cylinder head, piston, rings, wrist pin, bearing and keeper clips. 1128 020 1250 Good used shape. Has broken fins. Fits Stihl MS461 MS461c MS 461

View

50mm bore complete top end motor kit includes: cylinder head, piston, rings, wrist pin, and clips. Husqvarna part number 575255702, 575 25 57-02, 575 77 41-02, 575774102, 575 77 41-01, 575774101, 575255701, 575 25 57-01 good used shape Fits Husqvarna 372xp X-torque Xtorq X-torq, 372XT, 3...

View

Top end motor kit includes: cylinder head, piston, rings, wrist pin, and keeper clips. New AFTERMARKET part Fits K650 Active, Active II, K-650 Series, and can be retro fit onto many older 65cc and 70cc chainsaw models as well such as 7000.

sale

View

46mm Bore top end motor kit includes: cylinder head, piston, rings, wrist pin, and keeper clips. New AFTERMARKET part Fits Stihl 028S, 028 Super. Is a direct bolt on retrofit for smaller displacement 028 series saws: 028av, 028wb, 028 AV Woodboss

sale

View

Top end motor kit includes: cylinder, piston, ring, wrist pin, and pin keepers. 503 50 39-03 New AFTERMARKET part Fits Husqvarna 154 254 SE SG 154SG 154SE 254SE 254SG

sale

View

Part: 44mm bore piston and cylinder kit. Includes: piston, rings, wrist pin, keeper clips. 1121 020 1203 Condition: in good used shape Fits: Stihl 026, 026 AV (older models require plug in the compression release hole), 026 Pro, MS260

View

Part: piston and cylinder with rings, wrist pin, clips. 506 29 42-71 Condition: new, after-market part Fits: Husqvarna 3120 and Partner K1250 cutoff saw

sale

View

47mm Bore, top end motor kit includes: cylinder head, piston, rings, wrist pin and keeper clips. 1140 020 1205 New AFTERMARKET part Fits Stihl MS362 MS362c MS362CM MS 362 c cm m

sale

View

42mm diameter piston kit includes: piston, ring, wrist pin, and keeper clips. 501 67 88-01. With cylinder head gasket 501 67 67-02 New Original Husqvarna Mahle parts Fits Husqvarna 44, 444 and others

View

Part: piston and cylinder kit - includes the rings, wrist pin, keeper clips Part # 50082012, 50070047a, 50082012B Condition: good used shape Fits: Efco 152 and 952

View

Replaces (OEM): GB 11425 STIHL 1108 020 1220 Fits Models: STIHL TS 08...

sale

View

Piston and cylinder set 40mm bore. 1132 020 1200 New AFTERMARKET part Fits Stihl 019T, 019 T, MS190t, MS 190t, MS 190 t. Make sure you verify the part number you need before ordering.

sale

View

48mm Bore top end motor kit includes: cylinder head, piston, rings, wrist pin, and keepers. 50022052, 50092028A New AFTERMARKET part Fits Efco Olympyk Oleomac Oleo-Mac 962 162 165 John Deere JD CS62 CS-62

sale

View

44.3mm diameter, 50cc top end motor kit includes: piston, ring, wrist pin, and keeper clips, cylinder head. 544 14 29-08 New AFTERMARKET part Fits Husqvarna 346XP 346XPG 346 XP XPG after serial number 095200001. Can also be retrofit onto all of the following models: 350 351 353 346xp (pre-20...

sale

View

Complete cylinder and piston kit. Includes piston, rings, wrist pin and keepers, and cylinder. 49mm bore. 1127 020 1216, 11270201216 New aftermarket part Fits MS390, MS 390 , 039 The cylinder is drilled and tapped for the compression release valve.

sale

View

Complete cylinder and piston kit. 52mm bore, tapped for compression release port and includes plug. Includes cylinder, piston, rings, wrist pin, and keepers. Stihl part number 1111 020 1200 New aftermarket part Fits 050 051AV, TS510

sale

View

Complete cylinder and piston kit. 50mm bore. Includes cylinder, piston, rings, wrist pin, and keepers. Stihl part number 1119 020 1201 New aftermarket part Fits 038av, 038 Super

sale

View

Complete cylinder and piston kit. 40mm bore. Includes cylinder, piston, rings, wrist pin, and keepers. Stihl part number 1123 020 1214 New aftermarket part Fits MS230, and 023

sale

View

Complete cylinder and piston kit. 40mm bore. Includes cylinder, piston, rings, wrist pin, and keepers. Stihl part number 1123 020 1219 New aftermarket part Fits MS210, and 021

sale

View

Complete top end motor kit. 506 15 55-06 Includes: cylinder, piston, rings, wrist pin, and keepers NEW aftermarket part Fits Partner / Husqvarna K950 cutoff chop saw.

sale

View

Part: 47mm piston and cylinder kit, includes the rings, pin, and keeper clip set Replacement part # 1135 020 1210 Condition: new, after-market part Fits: stihl ms 361, MS361, MS341, MS 341 361

sale

View

Part: 50mm piston and cylinder with rings, pin, keeper clip set Replaces Stihl Part # 1138 020 1201 Condition: new, after-market part Fits: Stihl 441, MS441

sale

View

Part: piston and cylinder with rings, pin and keepers. Replaces Stihl Part # 1122 020 1211 Condition: new, after-market part Fits: Stihl 066, MS 660

sale

View

Part: 52mm piston and cylinder kit, includes the rings, keepers, pin. Condition: new, after-market part. Replaces PN 1128 020 1221 Fits: Stihl 046, MS 460, 046 Magnum

sale

View

Part: 50mm piston and cylinder kit, includes the rings, keepers, pin. Condition: new, after-market part. Replaces PN 1128 020 1227 Fits: Stihl 044, MS 440

sale

View

Part: 52mm piston and cylinder kit - includes the rings, wrist pin and keeper clips Replaces Part # 1119 020 1215, 1119 020 1202 Condition: new, after-market part Fits: Stihl 038 Magnum and ms 380. The mounting pattern for this cylinder is larger than on old style 038av 50mm chainsaws and is ...

sale

View

Part: 48mm piston and cylinder with rings, pin and keeper clip set Replaces: Stihl Part # 1125 020 1215 Condition: new, after-market part Fits: Stihl MS360, 036 Pro, and older Stihl 036 034 av if you use a plug for the compression release port.

sale

View

Part: 46mm bore top end engine kit. Includes: cylinder, piston with rings, wrist pin, and keeper clips Part # 1127 020 1210 Condition: new AFTERMARKET part Fits: Stihl 029, 029av, 029 Super, MS 290

sale

View

Part: 44mm bore piston and cylinder kit. Includes: piston, rings, wrist pin, keeper clips Replaces Part # 1121 020 1203 Condition: new, after-market part Fits: Stihl 026, 026 AV (older models require plug in the compression release hole), 026 Pro, MS260

sale

View

46mm bore, complete top end motor kit. Includes: piston assembly with ring, wrist pin, and keepers, and cylinder. Husqvarna part number 503 60 91-72, 503 60 91-04, 503 16 83-01 New, high quality AFTERMARKET part. Fits: Husqvarna 55, 55 Rancher, 51. Cylinder comes with threaded port for comp...

sale

View

Part: piston and cylinder with rings, wrist pin, clips. Part number 503 99 39-71 Condition: new, after-market part Fits: Husqvarna 395

sale

View

Part: 50mm piston and cylinder kit - includes the ring, wrist pin, and clip Condition: new, after-market part. Replaces part # 503 62 64 72 Fits: some models of Husqvarna 371, 372, 362, 372XP, 372 XP, 371XP, 365 special, Jonsered 2071, 2171, 2165 Turbo, 2065, 2063, 2163

sale

View

Part: 44mm Bore piston and cylinder with ring, keeper clip set, wrist pin Replaces Part # 503 86 99-71 Condition: new, after-market part Fits: Husqvarna 350 and Jonsered CS 2150 turbo. Will retrofit onto Husqvarna 346xp, 351, 353 & Jonsered 2149, 2152, 2153

sale

View

Part: piston and cylinder kit with ring and wrist pin Replaces Part # 503 87 02 74 Condition: new, after-market part Fits: Husqvarna 345 Location: squirrel bin

sale

View

Part: piston and cylinder kit, includes the ring, pin and keeper clip set Replacement part # 503 60 96 71 Condition: new, after-market part Fits: Husqvarna 268, 272, 272xp, 272K, 272 xp k xpg

sale

View

Part: 50mm piston and cylinder kit. Includes the piston ring, keeper clip set, pin Replacement part # 503 61 10 71 Condition: new, after-market part Fits: Husqvarna 268

sale

View

Top end motor kit includes: cylinder, piston, ring, wrist pin, and keeper clips. 503 54 11-72, 503 90 79-72 Condition: new after-market part Fits: Husqvarna 262, 262xp, 262 xp, and 261

sale

View

49mm bore piston and cylinder top end motor kit. Includes: cylinder, piston with rings, wrist pin, and keepers New AFTERMARKET part Fits Stihl TS-400 chop saw and others

sale

View

Complete top end motor kit, 40mm bore. With piston, wrist pin, piston ring, and keepers and cylinder. 1129 020 1202 New AFTERMARKET part Fits Stihl 020t, MS200 t, MS 200t

sale

View

48mm bore piston and cylinder top end motor kit. Includes: cylinder, piston with rings, wrist pin, and keepers New AFTERMARKET part Fits Husqvarna 365, 365 Special. Jonsered 2065 2165 Turbo

sale

View

46mm bore A/B piston with wrist pin and ring. Part # 537 21 96 02 New old stock from closed out dealer. Fits: Husqvarna 357 xp, Jonsered 2156 Turbo

View

Complete cylinder and piston kit. 38mm bore. Includes cylinder, piston, rings, wrist pin, and keepers. Stihl part number 1130 020 1208 New aftermarket part Fits 018 and MS180

sale

View

46mm bore A/B piston with wrist pin . NO RING. Part # 537 21 96 02 New old stock from closed out dealer. Fits: Husqvarna 357 xp, Jonsered 2156 Turbo

View

Part: 48mm piston kit, includes the wrist pin, ring, and keeper clips Condition: new old stock from closed out dealer. Fits: Husqvarna 262

View

44mm Bore Piston kit includes: piston, ring, wrist pin, and keepers. 503100201 New OEM from closed out dealer Fits Partner 5000, 5000H, 5000 Plus, 5000+, Jonsereds Jonsered 490

View

42mm Bore top end motor kit includes: cylinder, piston, rings, wrist pin, and pin keeper clips. 1121 020 1200, 1121 020 1202, 1121 020 1212, 1121 020 1210 New AFTERMARKET part Fits Stihl 024 AV Woodboss Farmboss etc MS240

sale

View

Complete cylinder and piston kit. 37mm bore, no compression release port. Includes cylinder, piston, rings, wrist pin, and keepers. Stihl part number 1130 020 1207 New aftermarket part Fits 017 and MS170 MS170c. Will also fit 018 018c MS180 MS180c On sale for direct import price, ge...

sale

View

Part: 49mm piston kit, includes the wrist pin and keeper clips Condition: new old stock from closed out dealer. Fits: Husqvarna 570

View

Part: 48mm piston kit, includes the wrist pin and keeper clips Condition: new old stock from closed out dealer. Fits: Husqvarna 262

View

Part: piston kit - includes the rings, wrist pin and keeper clips Condition: new, old stock from closed out dealer 537328502 Fits: Husqvarna 575xp

View

A/B 48mm bore piston kit includes: piston, ring, and wrist pin. 501 53 66-03, 501 53 66-02 New old stock from closed out dealer. Possible take off from a new saw as it has not been fired but appears to have been installed at one point. Fits: Husqvarna 61, 61 Rancher. Older model Husqvarna 61. ...

View

Part: 44mm piston kit - includes ring, wrist pin and keeper clips Replaces Part # 503 89 96 03 503899603 Condition: new old stock from closed out dealer. Fits: Husqvarna 351, 350 Jonsered 2150, 2149 Turbo. Some saws have 45mm bores, so make sure your saw has the 44mm bore prior to ordering.

View

Part: 54mm piston and cylinder kit - includes the piston ring, pin keepers. Replaces Husqvarna part # 503 90 74-71 Condition: new after-market part. Fits: Husqvarna 181, 281, 288, 288xp, 288 xp lite, 181se, 181sg, 181 281 SE SG

sale

View

44mm diameter piston kit includes: piston, ring, wrist pin, and keeper clips. 504 41 00-09, 504410009, 504 410009 New old stock from closed out dealer. Fits Jonsered Jonsereds 525 520sp 510sp 510 520 sp

View

42mm bore piston kit with ring, wrist pin, and keepers 503 51 32-71 New old stock from closed out dealer. Fits Husqvarna 242, 42 special

View

Top end motor kit includes: cylinder, piston, ring, wrist pin and keepers. 530-069932, 530 06 99-32 New AFTERMARKET part Fits Many AV spring mounted Poulan, Craftsman, and Poulan pro chainsaws. 2250 2450 2550 etc.

sale

View

47mm Bore piston kit includes: piston, rings, wrist pin, and keeper clips. 11400302002 good used shape Fits Stihl MS 362 311 MS311 MS362

View

Piston kit includes: piston, wrist pin, ring, and bearing. 505 21 55-02, 505215502 Good used shape Fits Husqvarna 562xp, 555, 560xp, 560 xp xpg. Jonsered 2258 2260 Turbo.

View

piston and ring assembly. Includes: piston with rings and bearings. Part number 92520 New OEM from closed out dealer stock Fits Mcculloch Pro Mac 850 SP-80 SP-81 Super Pro 80 81 81e and others

View

piston and ring assembly. Includes: piston with rings and bearings. Part number 92519 New OEM from closed out dealer stock Fits Mcculloch Pro Mac 850 SP-80 SP-81 Super Pro 80 81 81e and others

View

Part: 44mm piston kit - includes wrist pin and clips Replaces Part # 503 89 96 03 503899603 Condition: new old stock from closed out dealer. Fits: Husqvarna 351, 350 Jonsered 2150, 2149 Turbo. Some saws have 45mm bores, so make sure your saw has the 44mm bore prior to ordering.

View

52mm Bore A/B piston assembly. Includes: piston, rings, and wrist pin. 501 25 04-02, 501 25 04-03 New old stock from closed out dealer. Dusty from years of storage. Fits Husqvarna 180s 180cd 280cd 380cd 380s 480cd 180 280 380 480 s cd

View

40mm bore piston kit w/ ring, wrist pin, and bearing. Husqvarna Part Number 530069454, 530 06 94-54, 530-069454, 530 06 93-41, 530-069341, 530069341 New old stock from closed out dealer. Fits Husqvarna 41, 141, 142. Jonsered 2040 turbo

View

Part: 44mm piston kit - includes wrist pin Replaces Part # 503 89 96 03 503899603 Condition: new old stock from closed out dealer. Fits: Husqvarna 351, 350 Jonsered 2150, 2149 Turbo. Some saws have 45mm bores, so make sure your saw has the 44mm bore prior to ordering.

View

48mm diameter top end motor, piston and cylinder kit- includes: piston, cylinder head, ring, wrist pin, keeper clip set. 503 53 20 71 New AFTERMARKET part Fits: Husqvarna 162se, 61, 162, SE SG 61 Rancher Practica etc, and Jonsered 630

sale

View

Part: 44mm piston ring set Replaces Part # 503289010 Condition: new old stock from closed out dealer Fits: Husqvarna 351, 350 Jonsered 2150, 2149 Turbo

View

Part: 52 mm piston kit - includes the ring, wrist pin and keeper clips Replaces part # 503 50 27 02 Condition: new, after-market part Fits: Husqvarna 281, 181 SE SG, 281se Location: box 542

sale

View

Part: piston with rings, wrist pin, keeper clips Replaces Part # 501 89 41 03 Condition: new, after-market part Fits: husqvarna 3120

sale

View

Part: piston with ring, wrist pin, clips Replaces Part # 503 44 82 71 Condition: new, after-market part Fits: Husqvarna 268xp

sale

View

Part: 44 mm piston kit, includes the rings, wrist pin, clips Replaces Part # 1113 030 2001 Condition: new, after-market Fits: stihl 031

sale

View

Part: 48mm piston kit, includes the ring, wrist pin and keeper clips Condition: new, after-market part Fits: Husqvarna 262 Location: new misc. parts bin

sale

View

Part: 52mm bore piston with rings, pin and keepers 1119 030 2002 Condition: new, after-market part Fits: Stihl 038 Magnum, MS380, MS381

sale

View

Piston w/ rings, wrist pin, and clips Shindaiwa Part Number: 22157-41111, 2215741111 new after market part fits Shindaiwa 488

sale

View

Part: 46mm bore piston with ring, wrist pin, and keeper clips. Husqvarna part number 503 66 20-01 Condition: new, after-market part Fits: Husqvarna 257

sale

View

44mm piston kit includes: piston, rings, wrist pin, and keepers. 1110 030 2000 New AFTERMARKET part Fits: Stihl 041 AV, 041 Farmboss and others

sale

View

Part: 46mm diameter piston kit includes: piston, rings, pin and keepers. 1125 030 2002, 11250302002 New AFTERMARKET part Fits: Stihl 034, 034av, 034ave, 034aves, 034 Super, MS340

sale

View

48mm bore. Piston assembly includes: piston, ring, wrist pin, and keeper clips. 50092013, 50092013A New OEM part Fits Efco, Olympyk, Oleo-Mac 165 162 962

sale

View

46mm bore piston kit includes: piston, rings, wrist pin, and keeper clips. 029132000 New aftermarket part Fits Dolmar 116 si, 116si, 6000i, 6000 i

sale

View

52mm Bore A/B piston assembly. Includes: piston, rings, wrist pin, and keepers. 501 25 04-02, 501 25 04-03 New AFTERMARKET part Fits Husqvarna 180s 180cd 280cd 380cd 380s 480cd 180 280 380 480 s cd

sale

View

40mm bore piston kit includes: piston, rings, wrist pin, and clips. 99909-112, 99909112, 72363-98010, 7236398010 New AFTERMARKET part fits Shindaiwa 360, 377, and others

sale

View

48mm bore piston kit includes: piston, rings, wrist pin and keeper clips. 1125 030 2001 New AFTERMARET part Fits: Stihl 034 Super, 036 AV and MS 360, MS360

sale

View

Part: 54mm piston kit - includes the wrist pin, rings, keeper clips Replaces Part # 1122 030 2005 Condition: new, after-market part Fits: Stihl 066 Magnum, MS660, 066av

sale

View

Part: 54 mm piston kit, includes the rings, wrist pin and keeper clips 537 16 98-71 Condition: new, after-market part Fits: Husqvarna 385 xp, Jonsered 2186 Turbo

sale

View

Part: 42mm piston kit, includes rings, wrist pin and keepers. Part number: 1121 030 2005 Condition: new, after-market part Fits: Stihl 024 Woodboss, 024av

sale

View

44mm bore piston kit, includes rings, wrist pin and keepers. 1121 030 2001 New, after-market part Fits Stihl 026AV, 026, MS260, 026 Pro. Some 026 Pro, and MS 260 did use a larger size piston so you will want to be sure you are ordering the correct size and part number piston for your s...

sale

View

52mm Bore A/B piston kit with rings, wrist pin, and keepers. Replaces Stihl part # 1128 030 2009 Condition: new, after-market part Fits: Stihl 046av, 046 Magnum, MS460, MS 460 Magnum

sale

View

A/B 48mm bore piston kit includes: piston, ring, wrist pin and keepers. 501 53 66-03, 501 53 66-02 New AFTERMARKET part Fits: Husqvarna 61, 61 Rancher. Older model Husqvarna 61. Also 162, 162se, 162sg, se sg. and others.

sale

View

Part: 40mm piston with rings, wrist pin and keepers. Stihl part number 1123 030 2003 Condition: new, after-market part Fits: Stihl 021, 023, ms210, MS230, MS 210 230

sale

View

Piston kit assembly includes: piston, rings, wrist pin, and keeper clips. 507 476208, 507 47 62-08 , 507476208, 476208j, New AFTERMARKET part Fits Pioneer P62 P-62 P 62 and others

sale

View

Piston kit assembly includes: piston, rings, wrist pin, and keeper clips. 507 475398, 507 47 53-98 , 507475398 New AFTERMARKET part Fits Pioneer P52 P-52 P 52 and others

sale

View

Piston kit assembly includes: piston, rings, wrist pin, and keeper clips. 507 474529, 507 47 45-29, 507474529 New AFTERMARKET part Fits Pioneer P50 P-50 P 50 50s P50s P-50s and others

sale

View

Piston kit assembly includes: piston, rings, wrist pin, and keeper clips. 507 473926, 507 47 39-26, 507473926, 507 473961, 507 47 39-61, 507473961 New AFTERMARKET part Fits Pioneer P40 P-40 P 40 and others

sale

View

1 2 3 →

SEARCH FOR PARTS

BROWSE PARTS BY BRAND