![]( //chainsawr.com/cdn/shop/products/chainsawparts2_6220341_large.jpg?v=1571437694 )
shindaiwa 488 chainsaw crankcase assembly with crankshaft
Part: crank case engine housing chassis with crankshaft and rod Part# 22160-42001, 22157-21201, 72312-21502 Condition: good used/working shape Fits: Shindaiwa 488
![]( //chainsawr.com/cdn/shop/products/chainsawparts2_8808398_large.jpg?v=1571437682 )
stihl 038 chainsaw crankcase with crankshaft assembly
Part: crank case tank chassis with crankshaft and connecting rod Condition: good used/working shape Fits: stihl 038
![]( //chainsawr.com/cdn/shop/products/chainsawparts2_018_large.jpg?v=1571437675 )
homelite 410 chainsaw crankcase nut and retainer set of 4
Part: set of 4 nuts and retainers for the crankcase Condition: good used/working shape Fits: Homelite 410
![]( //chainsawr.com/cdn/shop/products/lazy_10_large.jpg?v=1571437664 )
jonsered 2071 turbo chainsaw right crankcase half #2
Part: right, clutch side crankcase half only Condition: good used/working shape Fits: Jonsered 2071 turbo
![]( //chainsawr.com/cdn/shop/products/chainsawr_parts_8344460_large.jpg?v=1571437662 )
husqvarna 357xp chainsaw case bolts
Part: set of 6 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 357 xp, 359
![]( //chainsawr.com/cdn/shop/products/chainsawr_parts_1038781_large.jpg?v=1571437659 )
danarm mark series chainsaw crankcase with bar stud and oil pump
Part: Danarm crank case housing with oil pump oiler and bar stud Condition: good used/working shape Fits: Danarm Mark I / 1, II
(2 in stock)
![]( //chainsawr.com/cdn/shop/products/chainsawr_parts_7856113_large.jpg?v=1571437658 )
jonsered 630 chainsaw crankcase half (right, clutch side)
Part: right clutch side of the crank case housing Condition: good used/working shape. Has some minor chipping. Fits: Jonsered 630
![]( //chainsawr.com/cdn/shop/products/chainsawr_parts_7276703_large.jpg?v=1571437658 )
poulan 46cc, 20" chainsaw crankcase tank chassis
Part: crank case tank chassis. Part # 530-036086 Condition: good used/working shape Fits: Poulan 46cc, 20" chainsaw models
![]( //chainsawr.com/cdn/shop/products/Picture_027_large.jpg?v=1571437649 )
jonsered 2159 turbo chainsaw crankcase half (left, flywheel side)
Part: left, flywheel side of the crank case housing Condition: good used/working shape Fits: jonsered 2159 turbo
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/chainsaws_121_large.jpg?v=1571437647 )
stihl ms210, ms230, ms250 chainsaw engine pan
Part: engine pan bottom Part # 1123 021 2500 Condition: good used/working shape Fits: stihl ms 210, 230, 250
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/chainsaws_9842235_large.jpg?v=1571437645 )
dolmar 112, 114 chainsaw crankcase half - clutch side
Part: clutch side of the crank case Condition: good used/working shape Fits: dolmar 112, 114
![]( //chainsawr.com/cdn/shop/products/chainsaws_2136777_large.jpg?v=1571437643 )
stihl 038 av chainsaw crankcase half-clutch side #2
Part: clutch side crank case half with bar studs, bare bones otherwise. PN 1119 020 2901 Condition: good used/working shape Fits: stihl 038
![]( //chainsawr.com/cdn/shop/products/chainsaws_3744394_large.jpg?v=1571437635 )
stihl 038 av chainsaw crankcase half - flywheel side #2
Part: flywheel side crank case half Condition: good used/working shape Fits: Stihl 038
(4 in stock)
![]( //chainsawr.com/cdn/shop/products/chainsaws_4171086_large.jpg?v=1656002483 )
jonsered 630 chainsaw crankcase housing half (left, flywheel side)
Part: crank case half- bare bones Condition: good used/working shape Fits: Jonsered 630
![]( //chainsawr.com/cdn/shop/products/before_6015188_large.jpg?v=1571437609 )
pioneer farmsaw II chainsaw crankcase half #2 (left side)
Part: left (flywheel side) of the crank case Condition: good used/working shape Fits: Pioneer Farmsaw II
![]( //chainsawr.com/cdn/shop/products/before_3453995_large.jpg?v=1571437609 )
echo cs-302 chainsaw crankcase half #2 (right side)
Part: crank case half- right, clutch side Condition: good used/working shape Fits: Echo CS 302
(3 in stock)
![]( //chainsawr.com/cdn/shop/products/before_9033969_large.jpg?v=1571437604 )
stihl 042, 048 chainsaw right crankcase half
Part: right (clutch side) crank case housing half with bar stud set Condition: good used/working shape Fits: Stihl 042, 048
(3 in stock)
![]( //chainsawr.com/cdn/shop/products/before_5777379_large.jpg?v=1571437604 )
stihl 042, 048 chainsaw left crankcase half
Part: left, flywheel side of the crank case Condition: good used/working shape Fits: Stihl 042, 048
![]( //chainsawr.com/cdn/shop/products/chainsaws_7605838_large.jpg?v=1571437603 )
husqvarna 162 se chainsaw flywheel side crankcase half
Part: flywheel side crank case half Condition: good used/working shape Fits: Husqvarna 162se
![]( //chainsawr.com/cdn/shop/products/chainsaws_8156907_large.jpg?v=1571437600 )
jonsered 80 chainsaw crankcase half
Part: crank case chassis tank half. Condition: worn but usable. Starter screw holes are wallowed out. Fits: Jonsereds 80
![]( //chainsawr.com/cdn/shop/products/new_chainsaw_parts_6098887_large.jpg?v=1571437592 )
husqvarna 480 cd chainsaw crankcase housing half (clutch side)
Part: clutch side crank case engine housing half with bar studs Condition: good used/working shape. Has chipping/oxidation in metal but is in usable shape with no breaks. Fits: Husqvarna 480cd
![]( //chainsawr.com/cdn/shop/products/new_chainsaw_parts_7656533_large.jpg?v=1571437588 )
husqvarna 480 cd chainsaw crankcase housing half (flywheel side)
Part: flywheel side crank case engine housing half Condition: good used/working shape Fits: Husqvarna 480cd
![]( //chainsawr.com/cdn/shop/products/621_2090664_large.jpg?v=1571437580 )
stihl 009 chainsaw crankcase half # 3 PN 1120 021 0710
Part: crank case tank half. Part # 1120 021 0710 Condition: good used/working shape. Fits: Stihl 009
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/621_9668448_large.jpg?v=1571437576 )
husqvarna practica 40 chainsaw crankcase tank #2
Part: crank case tank Condition: good used/working shape. No leaks. Fits: Husqvarna Practica 40
![]( //chainsawr.com/cdn/shop/products/jobu_7_large.jpg?v=1571437575 )
JOBU L 86 chainsaw Crank Case Half Tank Housing
Part: JO-BU L86 Crank Case Half Tank Housing Condition: good used/working shape
![]( //chainsawr.com/cdn/shop/products/jobu_5_large.jpg?v=1571437575 )
JOBU L 86 Crank Case chainsaw Half with Bar Studs
Part: JO-BU L86 Crankcase Half with Bar Studs Condition: good used/working shape
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/621_441611_large.jpg?v=1571437569 )
jonsered 630 chainsaw crankcase housing
Part: crank case tank housing. Condition: has a minor break on bottom edge but is in good usable shape with no leaks. Fits: Jonsered 630
![]( //chainsawr.com/cdn/shop/products/chainsawparts010_7379312_large.jpg?v=1571437545 )
echo cs-302 chainsaw crankcase half #1 (Left side)
Part: crank case half - left, flywheel side Condition: good used/working shape Fits: Echo CS 302
![]( //chainsawr.com/cdn/shop/products/chainsawparts010_4589778_large.jpg?v=1571437543 )
echo cs-500vl chainsaw crankcase half with bar stud set
Part: crank case half with bar stud and bearing Fits: Echo CS 500vl / 500 vl Condition: good used/working shape
![]( //chainsawr.com/cdn/shop/products/chainsawparts010_5320784_large.jpg?v=1571437543 )
echo cs-60s chainsaw crankcase with crank shaft and rod
Part: crank case with crank shaft, rod and bar studs Fits: Echo cs 60s/ 60 s Condition: good used/working shape
(2 in stock)
![]( //chainsawr.com/cdn/shop/products/621_4028310_large.jpg?v=1571437521 )
stihl 011 avt chainsaw crankcase with crankshaft
Part: crank case tank with crankshaft and connecting rod. Connecting rod roller bearings loose but included. Condition: good used/working shape Fits:straight off a Stihl 011 avt
![]( //chainsawr.com/cdn/shop/products/partnercoil_7_large.jpg?v=1571437518 )
echo cs-400evl, cs-440evl & John Deere 45 chainsaw crankcase assembly
Part: crank case housing with crankshaft, connecting rod and bearings Condition: good used/working shape Fits: Echo CS 400 EVL, Echo CS 440 EVL & John Deere 45 EVL
![]( //chainsawr.com/cdn/shop/products/parts_449030_large.jpg?v=1571437515 )
homelite 650 chainsaw crank back plate with bearing
Part: crankcase back plate with bearing A-70896, A70896 Condition: good used/working shape Fits: Homelite 650 750
![]( //chainsawr.com/cdn/shop/products/parts_5428025_large.jpg?v=1571437508 )
stihl 038 av chainsaw crankcase half - clutch side #1
Part: crank case / tank half – clutch side. With bar studs. Part # 1119 020 2901 Condition: good used/working shape. Metal has some pitting/oxidation Fits: Stihl 038 av
(3 in stock)
![]( //chainsawr.com/cdn/shop/products/parts_2271929_large.jpg?v=1571437507 )
jonsered 2054, 2055 turbo chainsaw crankcase bottom pan
Part: crank case cap / pan 503 18 26-01, 503 18 26-02 Condition: good used/working shape Fits: Jonsered 2054, 2051 2055 Turbo
![]( //chainsawr.com/cdn/shop/products/parts_6882375_large.jpg?v=1571437505 )
remington super 754 chainsaw crankcase cover - sprocket side #1 (with break)
Part: crank case cover, sprocket side Condition: Has some issues: gouging of the metal and a crack in one section as pictured but is still usable Fits: Remington Super 754
![]( //chainsawr.com/cdn/shop/products/parts_6887229_large.jpg?v=1571437504 )
poulan 2400, 2500 chainsaw crankcase tank assembly new (Poulan bin 2)
Part: crank case tank with caps 530037511, 530026126, 530-037511, 530-026126Condition: new Fits: Poulan 2400, 2500, 2600, 2900Location: new Poulan Bin 2
(2 in stock)
![]( //chainsawr.com/cdn/shop/products/parts_3169139_large.jpg?v=1571437493 )
stihl 009L chainsaw crankcase half # 1 PN 1120 021 0760
Part: crank case half. Part # 1120 021 0760 Condition: good used/working shape. A few broken off grills as pictured. Fits: Stihl 009 L
![]( //chainsawr.com/cdn/shop/products/Chainsaw_parts_869627_large.jpg?v=1571437481 )
husqvarna 272 xp chainsaw crankcase half
Part: crankcase half, left flywheel side-casing only Condition: good used/working shape Fits: Husqvarna 272 XP
(2 in stock)
![]( //chainsawr.com/cdn/shop/products/chainsaw_parts_4643030_large.jpg?v=1571437468 )
mcculloch pro mac 10-10 chainsaw yellow oil tank crankcase
Part: oil tank crank case Condition: good used/working shape Fits: McCulloch Pro Mac 10-10
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/chainsaw_parts_5069375_large.jpg?v=1571437461 )
jonsered 365 chainsaw crankcase tank
Part: crank case tank with bar bolts Condition: good used/working shape Fits: Jonsereds 365
![]( //chainsawr.com/cdn/shop/products/chainsaw_parts_7655972_large.jpg?v=1571437461 )
poulan 2900 chainsaw crankcase tank assembly
Part: crank case housing / fuel tank Condition: good used/working shape, no leaks Fits: Poulan 2900
![]( //chainsawr.com/cdn/shop/products/chainsaw_parts_6462755_large.jpg?v=1571437450 )
Solo 639 Chainsaw Crankcase Tank Engine Chassis
Part: Crankcase tank engine chassis Condition: Good used/working shape Fits: Solo 639
![]( //chainsawr.com/cdn/shop/products/chainsaw_parts_1501038_large.jpg?v=1571437449 )
homelite 27av chainsaw crankcase housing tank chassis
Part: crank case housing/tank chassis Condition: good used/working shape-no leaks Fits: Homelite 27 AV
![]( //chainsawr.com/cdn/shop/products/chainsaw_parts_4599696_large.jpg?v=1571437448 )
Remington SL-11 Chainsaw Crankcase Cover and Studs
Part: Crank case cover and studs Condition: Good used/working shape Fits: Remington SL11
(3 in stock)
![]( //chainsawr.com/cdn/shop/products/chainsaw_parts_8638528_large.jpg?v=1571437443 )
Frontier Mark 1 Chainsaw Crankcase Housing Handle Half
Part: crankcase housing handle half Condition: Good used/working shape-has some pitting of the metal. Fits: Frontier Mark 1 / I
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/thrusday25_22_large.jpg?v=1571437433 )
mcculloch mini mac 6 chainsaw crankcase bottom
Part: crank case bottom Condition: good used/working shape Fits: McCulloch Mini Mac 6
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/chainsaw_parts_8391543_large.jpg?v=1571437426 )
Homelite Super 2 Chainsaw Crankcase w/ Studs
Part: Crankcase w/ studs Condition: Good used/working shape Fits: Homelite Super 2
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/chainsaw_parts_665742_large.jpg?v=1571437424 )
Troy Bilt MS 42 Chainsaw Crankcase Oil Tank
Part: Crankcase oil tank Condition: Good used/working shape Fits: Troy Bilt MS42
![]( //chainsawr.com/cdn/shop/products/chainsaw_parts_8072255_large.jpg?v=1571437412 )
Homelite Super EZ Chainsaw Crankcase Half
Part: Crankcase half Condition: good used/working order Fits: Homelite Super EZ
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/p1080832_large.jpg?v=1571437404 )
craftsman 18" chainsaw crankcase cap/pan
Part: crankcase cap Condition: good used/working shape Fits: Craftsman (poulan built) 18" chainsaws with model #: 358.351190 and some other models
![]( //chainsawr.com/cdn/shop/products/p1080818_large.jpg?v=1571437403 )
Craftsman 20" 46cc Chainsaw crankcase pan/cap
Part: crankcase pan/cap Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with model #: 358.350202 and some other models
![]( //chainsawr.com/cdn/shop/products/p1070401_large.jpg?v=1571437392 )
McCulloch Power Mac 310 Chainsaw Crankcase Crank Case & Bolts 215943
Part: cylinder crankcase, part #215943 and bolts Condition: good used/working shape Fits: McCulloch Power Mac 310, also fits other models
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/2EE2BFAF-4F73-4E19-AE8F-D592D59E9BE8_large.jpg?v=1717774179 )
husqvarna 445, 450, 445e, 450e chainsaw crankcase tank chassis housing with bar studs New OEM 537 43 82 (BHJSP)
Part: crank case tank chassis housing with bar studs and oil vent Part number: 5374382 Condition: New old stock. Has a few minor dings from years of storage. Fits: Husqvarna 445, 450, 445e, 450e
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/4BF55180-3B68-4902-94BA-9BF13A219BF5_large.jpg?v=1717772131 )
Stihl 075 chainsaw crankcase 1111 020 2115 new OEM (SAG)
Crank case crankcase part number 1111-020-2115 11110202115 New old stock from closed out dealer Fits some models of 075 chainsaws. There are a few different styles so check to make sure this will work for your saw prior to purchase. May fit other models.
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/1712930939483_large.jpg?v=1712930924 )
Husqvarna 262 XP chainsaw flywheel side case half #2
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape, has some paint loss, a chip out and wear spot Fits Husqvarna 262, 262xp, and 261
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/6CFCBDBD-1E49-436E-8ABD-D729FCE50047_large.jpg?v=1711561852 )
Jonsered 625 Chainsaw Crankcase Assembly 501 68 52-67 NOS (upstairs)
Crank case assembly includes: right clutch side case half, left flywheel side case half, and bearings. 501 68 52-67, 501 52 84-02 Does not include crankcase gasket New old stock from closed out dealer. There are a few chips to the paint and some maybe old oil that does not want to clean up. ...
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/C86E37BB-3D11-464B-8265-12B9D1BE0490_large.jpg?v=1699985217 )
husqvarna 351 clutch side crankcase half 503 85 69
husqvarna 351 clutch side crank case half does not include bearing or seal good used working condition some scratching wear and corrosion. fits husqvarna 351
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/84850E5E-3878-416D-B3F0-ADBA3519406F_large.jpg?v=1699547241 )
husqvarna 570, 575 xp chainsaw air injection tube new oem pn 537 20 92-01 (H-7)
Part: air duct/ injection tube / jet / shield, part # 537209201 Condition: new old stock from closed out dealer. Fits: husqvarna 570 576, 575xp, 576xp
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/image_436eb266-eb37-4d91-abcd-044d74a0051b_large.jpg?v=1689258039 )
husqvarna 266xp chainsaw left, flywheel side crankcase half
Part: crank case half (left, flywheel side) 501 68 53 Condition: good used/working shape. Has some minor chipping. Fits: Husqvarna 266 xp
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/image_27b3c18f-0d1d-475e-9bac-3cfe17563dac_large.jpg?v=1688668153 )
husqvarna 266se chainsaw right, clutch side crankcase half #2
Part: crank case (right, clutch side) Condition: Bearing is NOT good. In good used/working shape Fits: Husqvarna 266 se
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/image_e31433b6-4020-4d02-920a-995904ffbd1a_large.jpg?v=1687982265 )
Stihl MS440 Chainsaw Clutch side Crankcase Half #3
Clutch PTO right side crank case half only. 1128 020 2951 In good used shape. Has a crack and a chip missing, but still good and functional Fits Stihl MS 440
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/image_068309d1-6c42-4e68-bbca-71c092037d05_large.jpg?v=1687982025 )
Stihl MS440 Chainsaw Flywheel side Crankcase Half 1128 021 0762 #3
Flywheel starter side crank case half only. Half of 11280210762 In good used shape. Fits Stihl MS 440 Magnum
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/image_42851180-b189-4125-a635-a233fca2b63c_large.jpg?v=1684523629 )
jonsered 2159 turbo chainsaw crankcase half (left, flywheel side) #2
Part: left, flywheel side of the crank case housing Condition: good used/working shape. Has a small hole. Fits: jonsered 2159 turbo
![]( //chainsawr.com/cdn/shop/files/image_257a24aa-238c-4e42-aedd-dd910c8c03f8_large.jpg?v=1684522886 )
husqvarna 359, 357 xp clutch side crankcase half #3
husqvarna 359,357xp clutch side crank case half does not include bearing or seal good used working condition some scratching wear. Has a chip missing - see photos fits husqvarna 359, 357xp
![]( //chainsawr.com/cdn/shop/files/image_80f59b65-919c-45dc-853e-9cb69f0dd293_large.jpg?v=1684257946 )
Stihl 034 Chainsaw Flywheel Side Crankcase Half 1125 021 0700
Crank case. Left side. 1125-021-0700 11250210700 In good used shape Fits some models of 034av 036av 036 034 av super
(1 in stock)
![]( //chainsawr.com/cdn/shop/files/image_5317f65a-219a-4f15-bc11-e822a7959668_large.jpg?v=1682449375 )
Lombard Super Lightning Chainsaw Orange Drivecase Assembly
Drivecase with bar studs and chain tensioner In good used shape, bearing and seal may or may not still be usable Fits Lombard Super Lightning and maybe other models. Match to your existing part to be sure.
![]( //chainsawr.com/cdn/shop/products/image_e9e60fa3-7e4a-48cb-8283-7853654d6c87_large.jpg?v=1678910002 )
Dolmar PS-7910 Chainsaw Clutch Side Crankcase Assembly 038 111 270
Right, clutch PTO side crank case half 038111270 Good used shape Fits Dolmar PS7900 PS7300 PS7910 PS7310 PS 7300 7900 7310 7910 6400 PS6400 PS6400c PS 6400c
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_f68bc067-95f9-4261-968e-a94a89c9874b_large.jpg?v=1665518324 )
Partner R20 Chainsaw crankcase crank case 340785 NEW RBFP-8N
crank case crankcase NEW OEM from old dealer stock - dusty/dirty from years of storage. Fits Partner: older chainsaws and cut off saws R16 R20 R20T R21 R21T R417 R417T R418 R420 R420T R421 R517
![]( //chainsawr.com/cdn/shop/products/image_c177ec0d-3e77-4aa4-8af1-b075439fc4e5_large.jpg?v=1661369873 )
Dolmar PS-7910 Chainsaw Crankcase
crank case crank case with crankshaft and connecting rod 038111160, 038 111 160 038-111-641 038111641 In good used shape Fits Dolmar PS7900 PS7300 PS7910 PS7310 PS 6400 PS6400 6400c 7300 7900 7310 7910
![]( //chainsawr.com/cdn/shop/products/image_3618b89f-e68b-4b49-8e26-7286ef1fa64b_large.jpg?v=1660239070 )
poulan 3400 to 4000 series chainsaw crankcase assembly
Part: crank case crankcase assembly with crankshaft and connecting rod Part # 10696 Condition: good used shape. Has some dings and scratches. Fits: Poulan 3400, 3700, 3800, 4000
(2 in stock)
![]( //chainsawr.com/cdn/shop/products/image_2663984f-6245-45ca-a196-09b3a05b0349_large.jpg?v=1658942056 )
Stihl MS271 chainsaw crankcase with bar studs
crank case with bar studs Part number 1141 020 3103 B Good used shape. fits MS 271 MS-271
![]( //chainsawr.com/cdn/shop/products/image_fa0bf24d-b78e-42a3-a204-ad0b55ac8666_large.jpg?v=1658775408 )
Stihl MS261c Chainsaw Crankcase Assembly #1
Complete crank case includes: crankshaft and rod assembly, crankshaft bearings, seals, left flywheel side case, and right clutch side case, bar studs In good used shape Fits Stihl MS 261 MS 261 C
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_ad75d361-9da7-4d46-b3aa-fd08301f9668_large.jpg?v=1657723174 )
Dolmar PS-421 chainsaw crankcase assembly
Crank case assembly with crankshaft crank shaft and connecting rod Good used shape Fits PS421 PS 421
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_eac03981-f6d3-4a90-8c54-05cca057cf8e_large.jpg?v=1656002267 )
jonsered 630 chainsaw crankcase half (right, clutch side) #2
Part: right clutch side of the crank case housing Condition: good used/working shape. Has some minor chipping. Fits: Jonsered 630
![]( //chainsawr.com/cdn/shop/products/image_23925f71-44ee-4d35-b3cb-905e89f58038_large.jpg?v=1655922216 )
jonsered 2166 turbo chainsaw crankcase half flywheel side
Part: crank case half, left flywheel side Condition: good used/working shape Fits: jonsered cs2166 cs-2166
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_02ec7af5-fe8b-4505-9beb-1615fe342139_large.jpg?v=1652885243 )
Poulan Pro 415 chainsaw crankcase half - clutch side 503 42 02
Part: clutch side of the crank case housing Part number 5034202 Condition: good used/working shape. Fits: Poulan Pro PP 415, Jonsered 2077 Turbo, 2083
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_7dfc9a97-259f-4b7a-856a-786ea0b34600_large.jpg?v=1652885020 )
Poulan Pro 415 chainsaw crankcase half - flywheel side 503 42 01
Part: flywheel side of the crank case housing Part number 5034201 Condition: good used/working shape. Fits: Poulan Pro PP 415, Jonsered 2077 Turbo, 2083
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_72c15846-f992-45a9-a19e-3fc44e01ff83_large.jpg?v=1648572622 )
remington mighty mite automatic chainsaw crankcase cover 68039 New (loc: RM-1)
Part: crank case cover with bearing Condition: new old stock. Has some oxidation from years of storage Fits: Remington Mighty Mite Automatic, Mighty Mite Bantam, Mighty Mite Deluxe MMA MMB MMD
(2 in stock)
![]( //chainsawr.com/cdn/shop/products/image_4397f2b3-ecb5-46c1-be50-43a96395dfce_large.jpg?v=1645122761 )
Stihl MS361 Chainsaw Crankcase Assembly #2
Crankcase with both case halves, crankshaft, and bearings. 1135 020 2601 In good used shape. Has some chips and dings. Photos for reference. May have dings and chips in other places on the one you receive. May NOT have spike. Fits Stihl MS 361
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_a0c80740-2792-407b-bee7-344209b9af9a_large.jpg?v=1643385723 )
husqvarna 266se chainsaw left, flywheel side crankcase half #2
Part: crank case half (left, flywheel side) Condition: good used/working shape. Has a chip, and still functional. See photos. Fits: Husqvarna 266 se
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_409f86af-7934-457e-84ac-f64742688853_large.jpg?v=1639757153 )
stihl 028 chainsaw left flywheel side crankcase half #2
Part: crank case engine housing Condition: good used/working shape. Not very pretty but completely functional. Fits: Stihl 028
![]( //chainsawr.com/cdn/shop/products/image_208609a5-22e0-459e-884c-bd146e52fec9_large.jpg?v=1639681977 )
husqvarna 575 xp chainsaw crankcase half #2
Part: left (flywheel side) crank case tank half Condition: good used/working shape. Has a chip missing - see photos Fits: Husqvarna 575xp, 570
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_7256483b-289d-4f94-94ce-8e4f2f11b70c_large.jpg?v=1638992394 )
Stihl MS440 Chainsaw Flywheel side Crankcase Half #2
Flywheel starter side crank case half only. 1128 021 0762 Half of 1128 020 2122 In good used shape. Has a chip missing. See photos Fits Stihl MS 440 Magnum
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_fd82766a-5f76-4474-86a7-1eb26bfc79a4_large.jpg?v=1638560038 )
stihl 044 av chainsaw crankcase half clutch side #3
Part: clutch side of the crank case half 1128 020 2901 Condition: good used/working shape, has some scrapes and chips Fits: some models of Stihl 044 AV
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_db3c4db2-6acd-4373-8c1f-db2459b00672_large.jpg?v=1634845604 )
echo cs-452VL chainsaw crankcase assembly
Part: crank case housing with crankshaft, connecting rod and bearings Condition: good used/working shape Fits: Echo CS452 vl CS 452 VL
![]( //chainsawr.com/cdn/shop/products/image_82939320-7a69-45ce-931d-2da1477b1fcb_large.jpg?v=1634672378 )
husqvarna 262 chainsaw seal retainer with screws type 2
Part: seal retainer with o ring and screws Condition: good used/working order Fits: Husqvarna 262. May fit others
![]( //chainsawr.com/cdn/shop/products/image_27eb88ef-0a45-44e5-a642-bf358e0c957c_large.jpg?v=1631215221 )
partner R16 chainsaw crankcase housing half with bar studs
Part: crank case housing with bar studs Condition: good used/working shape Fits: Partner R-16, R-20, R-21 R2 R21 T and others 55cc
![]( //chainsawr.com/cdn/shop/products/image_d3889d9e-0b27-4e4a-ad22-e018cad5f29d_large.jpg?v=1630594584 )
Stihl MS362 Chainsaw Clutch Side Crankcase Half #2
PTO clutch side crank case half casting 1140 020 2904 In good used shape. Has some chips and cracks. Fits Stihl MS-362
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_bfbfefd2-6010-4bf6-8375-4c7369991d9e_large.jpg?v=1676923352 )
Stihl MS362 Chainsaw flywheel Side Crankcase Half #2
Flywheel ignition side crank case half casting 1140 020 2611 In good used shape. Has some cracks and dings. Fits Stihl MS-362
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_d664918c-7b9e-4bc2-914e-17ffce2dbd0e_large.jpg?v=1628693960 )
poulan pro 4620 crankcase housing tank
Part: crankcase housing fuel / oil tank with bar studs. Condition: good used/working shape Fits: Poulan Pro 4620 and others
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_bbd429fd-8c6a-4b9f-98b8-8418073380cf_large.jpg?v=1627051321 )
husqvarna 262, 254, 257 chainsaw deflector shield NEW (H-58) 503 54 37-01
Part: shield / deflector Part # 503 54 37-01 Condition: New old stock OEM part Fits: Husqvarna 254, 257, 262
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/1626960377522_large.jpg?v=1626960411 )
Husqvarna 257 chainsaw flywheel side case half
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape Fits Husqvarna 257, 262, 262xp, and 261
![]( //chainsawr.com/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_large.gif )
Husqvarna 257 chainsaw clutch side case half
Crankcase half. Right, clutch side. One side of 501 86 00-04 In good used shape Fits Husqvarna 257, 262, 262xp, and 261
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_a6373857-0e99-4eb3-8a51-f7f99c07d032_large.png?v=1619028083 )
jonsered 2077 chainsaw crankcase half - flywheel side 503 42 01
Part: flywheel side of the crank case housing Part number 5034201 Condition: good used/working shape. Has small chip. Fits: Jonsered 2077 Turbo
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_d508b84d-ac38-4bbb-bb83-5c9d9e0fc4ff_large.png?v=1618421985 )
Efco MT 3500 chainsaw crankcase and tank New (BOS)
Crankcase, oil and fuel tank. Includes bar studs, fuel lines and filter. Part number 50240165R NEW take off from brand new disassembled saw. May be dusty from storage. Fits Efco MT3500
![]( //chainsawr.com/cdn/shop/products/image_53bd8d73-857f-40f2-b600-220c99171218_large.png?v=1616768412 )
Stihl MS261 Chainsaw Flywheel Side Case Half
Flywheel side case half. Left side In good used shape Fits Stihl MS 261 MS-261
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_a2b73b37-d4aa-4386-ba90-77930afe8d8a_large.png?v=1616091157 )
Stihl 020 AV chainsaw crankcase half PN 1114 020 2900
Part: crank case tank half. Part # 1114 020 2900 Condition: good used/working shape. Fits: Stihl 020AV
(1 in stock)
![]( //chainsawr.com/cdn/shop/products/image_ee3fbbf3-6137-445a-82e8-d9fab4fc1f3f_large.png?v=1616090571 )
Stihl 020 AV chainsaw crankcase half PN 1114 021 0700
Part: crank case tank half. Part # 1114 021 0700 Condition: good used/working shape. Fits: Stihl 020AV