(1 in stock)
lombard lightning chainsaw crankcase engine housing new (Lombard bulky)
Part: crank case engine housing 5-2001 Condition: New old dealer stock Fits: Lombard Lightning
(2 in stock)
Husqvarna 262xp chainsaw case bolts
Part: set of 6 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 262 xp 257
Stihl MS391 Chainsaw Crankcase and air guide shroud 1140 011 3030
Crankcase with both case halves and air guide shroud air box 1140-011-3030 1140 087 3001 1140-087-3001 In good used shape Fits Stihl MS 391 MS311 MS 311
Dolmar 343 Cut off saw Complete Crankcase Assembly
Crank case assembly with crankshaft and bar studs, bearings etc. 031 111 022, 031 111 000, 965 518 013, 031 120 001, 905 810 354, 962 900 054, 962 900 051 In good used shape Fits Dolmar 343
(2 in stock)
Partner S50 chainsaw crankcase and crankshaft assembly
Part: crank case engine housing chassis with the crank shaft and connecting rod Part # 340703 Condition: good used/working shape Fits: Partner S-50 S 50
(1 in stock)
Partner 500 chainsaw crankcase and crankshaft assembly
Part: crank case engine housing chassis with the crank shaft and connecting rod Part # 503 34 13-30 Condition: good used/working shape Fits: Partner 5000, 500, 540
(1 in stock)
Efco 132 S Chainsaw Crankcase 50030196R NEW (BOS)
Crankcase 50030196 R superseded by 50030196AR NEW take off from brand new disassembled saw. Has some dings/dusty from storage Fits Efco 132 S
(1 in stock)
Efco 132 S Chainsaw Short block Assembly NEW (BOS)
Shortblock assembly. Includes cylinder, piston, crankshaft, bearings and pan 50030002R 50032010 5003011R 50040189R NEW take off from brand new disassembled saw Fits Efco 132 S 131 132 132S
(1 in stock)
Partner R14-T chainsaw crankcase assembly
Crankcase assembly for a Partner R 14 T R14T R-14T. Includes crankshaft, bearings, connecting rod, and bar studs. Good used, working shape
(1 in stock)
Stihl 041 AV Chainsaw Crankshaft Case Crank Shaft & Rod
Part Name: Crankscase with crank shaft, bearings and connecting rod Condition: good used/working shape Fits the Following Models: Stihl 041 AV
(1 in stock)
Mall 2MG Chainsaw crankcase bearing plate 42710and hardware
Crankcase bearing plate for Mall 2 MG 2-MG chainsaw with hardware. Part number 42710. good used shape
(1 in stock)
stihl 042, 048 chainsaw left crankcase half #2
Part: left, flywheel side of the crank case Condition: good used/working shape. has a chip in it, but still quite functional Fits: Stihl 042, 048
(1 in stock)
Husqvarna 435 chainsaw crankcase tank chassis housing with bar studs
Part: crank case tank chassis housing with bar studs Condition: good used/working order Fits: Husqvarna 435 435e
(1 in stock)
Jonsered 451 ev chainsaw crankcase half- right side
Part: crankcase housing half - right side Condition: good used/working shape Fits: jonsereds 451ev
Jonsered 2083 II chainsaw crankcase half - right clutch side with bar stud set #2
Part: right, clutch side of the crank case housing with bar stud / bolt set Condition: good used/working shape. Has some minor oxidation/pitting and a chip at the bottom. Fits: Jonsered 2083 II Turbo
(1 in stock)
Jonsered 2083 II chainsaw crankcase half - left flywheel side #2
Part: left, flywheel side of the crank case housing Condition: good used/working shape. Has some minor oxidation/pitting and a crack at the top. Still quite functional. Fits: Jonsered 2083 II Turbo
(1 in stock)
Dolmar 111 Chainsaw Flywheel Side Case Half
Flywheel side crankcase half. In good used shape Fits Dolmar 111 and others
Dolmar 111 Chainsaw Clutch Side Case Half
Clutch crank case crankcase clutch half with bearing and studs In good used shape Fits 111 and others
(2 in stock)
Husqvarna 42 chainsaw crankcase half - right side
Part: crank case housing half, right side 501 62 06-01 Condition: good used/working shape Fits: Husqvarna 42 and some models of 246
(1 in stock)
Homelite XL Chainsaw Crankcase crank case #3
Part:Crankcase Condition:good used/working shape Fits: Homelite XL
Homelite 330 Chainsaw Crankcase NEW A-95884-A (HOS-E)
crankcase with bar studs. A95884A new part from old dealer stock, dusty fits Homelite 330 chainsaw models
Jonsered 2186 Turbo Chainsaw Clutch Side Case Half
Clutch PTO side crankcase half. In good used shape Fits Jonsered CS 2188 2186 Turbo
Dolmar PS-5105 Chainsaw Crankshaft (late model black coil)
Crankshaft crank with rod 181 120 102, 181120102 In good used shape Fits Dolmar PS 460 510 5105 5105h PS5105 PS510 with the EZ start mechanism and Black colored ignition module (note the keyway position at approx. 3 o-clock from TDC.
Dolmar PS-5105 Chainsaw Flywheel Side Crankcase Half
Flywheel mag magneto left side case half. 181 111 154, 181111154 In good used shape Fits Dolmar PS 460 510 5100 5100s 5100sh 5105 5105h PS5105 PS510
(3 in stock)
Stihl Chainsaw Crankcase/Cover Pin New 1118 162 5200 (st 205)
Stihl crankcase/cover pin. Part #: 11181625200/1118-162-5200 New old stock part from closed out dealer.
(4 in stock)
Efco 156 chain saw crankcase assembly only bare bones used
description : flywheel and pto side case halves only does not include crankshaft rod or bearings part number: for set 50010347 condition : used in good working condition fits efco 156 chainsaw
(1 in stock)
Efco 156 chainsaw complete crankcase housing with crankshaft
Part: crank case engine housing with crank shaft, rod, studs Condition: good used/working order with good bearings Fits: Efco 156
(1 in stock)
Dolmar 112 Chainsaw Complete Crankcase Assembly
Crank case assembly with crankshaft and bar studs, bearings etc. 112 111 013, 112111013, 119 111 031, 119111031 In good used shape Fits Dolmar 112 114 and others
(1 in stock)
Jonsered 625 Chainsaw Crankcase Assembly
Crank case assembly includes: right clutch side case half, left flywheel side case half, crankshaft and bearings. 501 68 52-67, 501 52 84-02 In good used shape Fits Jonsered 625 and 670 with the 2 piece ignition. Up to serial number 4160001 - 625Up to 4270001 - 670
Pioneer 1072 Chainsaw Crankcase Assembly
Crank case assembly. Houses gas fuel and oil tanks, rear handle and air box. 473727, 473152 In good used shape Fits Pioneer 970 1072 Holiday I II and others
(1 in stock)
John Deere 55sva Chainsaw Crank Case Assembly
Crankshaft and crank case assembly Echo part # 100 200-1523 0, 100 100-1733 0 Good Used/ Usable John Deere 55 sva, Echo 550 evl
Echo CS 670 Chainsaw Crankcase Kit
Crankcase assembly complete including crankshaft pn# 10020438133 Good Used/ Usable Echo CS670
(1 in stock)
Husqvarna Practica 44 Chainsaw Clutch Side Case Half
PTO clutch right side crankcase half. One side of 501 66 10-02 In good used shape Fits Husqvarna Practica 44 and many others.
(1 in stock)
Ryobi 40cc Chainsaw Crankcase Assembly
Crankcase with crankshaft, crank shaft and rod with bearings and seals. 518442001 In good used shape Fits Ryobi 40cc RY10532, Redmax Zenoah GZ4000
(1 in stock)
Dolmar 116 Chainsaw Clutch Side Case Half
119 111 017, 119111017. Clutch right side crank case crankcase half In good used shape Fits Dolmar 113 and 116
(1 in stock)
Pioneer 1200A Chainsaw Drivecase, Crankcase, and Automatic Oiler
Drive case with bearings, bar studs, crank case and auto oil pump. In good used shape Fits Pioneer 1200 A and others
(1 in stock)
Husqvarna Practica 44 Chainsaw Flywheel Side Case Half
Flywheel left side crankcase half. One side of 501 66 10-02 In good used shape Fits Husqvarna Practica 44 and many others.
Husqvarna 272xp Chainsaw Flywheel side Case Half
Crank case half, left flywheel side. For saws with 1pc ignition coil. In good used shape Fits Husqvarna 61, 268, 272 xp SN# 107001+
(1 in stock)
jonsered 2083 II chainsaw crankcase half - left flywheel side
Part: left, flywheel side of the crank case housing Condition: good used/working shape. Has some minor oxidation/pitting. Fits: Jonsered 2083 II Turbo
(1 in stock)
Partner Chainsaw flywheel side case half 340785 NEW RBFP-8N
NEW OEM from old dealer stock - flywheel side crankcase half - Fits Partner: older chainsaws and cut off saws R16 R20 R20T R21 R21T R417 R417T R418 R420 R420T R421 R517
(2 in stock)
Stihl 045av Chainsaw Crankcase Half Flywheel Side
Flywheel side case half casing 1115 020 2113 In good used shape Fits Stihl 045av 056 AV 045 AV Super etc
David Bradley 360 chainsaw Drivecase
Drivecase with bar studs and oil line In good used shape Fits David Bradley 360 917.series and others
Stihl 026 Chainsaw Flywheel Side Case Half
Flywheel side crankcase half In good used shape Fits Stihl: 026AV, 026 Pro
(1 in stock)
Jonsered 52e Chainsaw Flywheel side crankcase half
Flywheel side case half 504 44 00-11, 504440011, 504-440011 In good used shape Fits Jonsereds 52e, 52 and others
Stihl FS66 brushcutter crankcase assembly 4123 020 2800 NEW SD6
NEW OEM from old dealer stock - crank case assembly - Fits Stihl: brushcutters
(3 in stock)
Stihl FR106 Brushcutter Rear Crankcase Assembly 4129 020 2600 NEW SD2
NEW OEM from old dealer stock - Rear crank case assembly with bearing and seal - Fits Stihl: FS106 FR106 BT106
(3 in stock)
Stihl FS106 Brushcutter Front Crankcase Assembly 4129 020 2800 NEW SD1
Front Crank case assembly with casting, bearing and seal 4129 020 2800 New old stock part Fits Stihl FS106 FR106 BT106
(1 in stock)
Homelite 110 Chainsaw Gear Housing A-20077 NEW (HOS-E)
Gear Housing drivecase A20077 NEW Fits Many Homelite 110 electric chainsaw
(2 in stock)
Dolmar 123 Chainsaw Flywheel Side Case Half
Flywheel side crankcase half. 123 111 022 In good used shape Fits Dolmar 123 133 and others
(1 in stock)
John Deere CS56 Chainsaw Crankcase Assembly
Crankcase assembly, with crankshaft, crank rod, bar studs, and casings. Efco part number 50012131 In good used shape Fits Efco 956 and JD CS-56
(1 in stock)
dolmar 122s, 122sl chainsaw crankcase half, flywheel side 122 114 022 new (dolmar box 122)
Part: crankcase / tank half, magneto side Part # 122114022 Condition: new, old stock Fits: Sachs-Dolmar 122 s/sl
(1 in stock)
Stihl 020 AV Chainsaw Crankcase Assembly NEW 1114 020 1202 (I600)
NEW OEM from old dealer stock - 11140201202 - Crank case assembly with both left (flwheel side) and right (clutch side) case halves, bolts and locator pins. - Fits Stihl 020av, 020avp, 020 av avp
stihl 026 chainsaw crankcase assembly with crankshaft
Part: crankcase engine housing with crank shaft and rod Condition: good used/working order Fits: Stihl 026
(1 in stock)
Dolmar 108 Chainsaw Flywheel Side Case half
Flywheel Left side crankcase half. One side of Dolmar part number 108 111 110 In good used shape. Includes bearing and seal which may or may not still be good, but seem OK. Fits Dolmar 108 and others
(4 in stock)
efco 165 chainsaw complete crankcase housing with crankshaft
Part: crank case engine housing with crank shaft, rod, studs Part # 50090048r, 50090059 Condition: good used/working order Fits: Efco Oleo-mac 165 162 962
(1 in stock)
Dolmar 108 Chainsaw Clutch Side Crankcase Half
Right side, clutch side case half. Dolmar part number 108 111 100, 108111100 In good used shape Fits Dolmar 108, 103, 105
jonsered 910 chainsaw crankcase housing half - right clutch side
Part: right side crank case chassis housing with bar bolt / stud set Condition: good used/working shape Fits: Jonsered 910 , 910e , 910ev
(1 in stock)
homelite super xl, xl-12 chainsaw crankcase with bearing and seal
Part: crank case housing with bearing and seal Part # a-65736, 58956, 12282-a Condition: good used/working shape Fits: Homelite super xl, xl 12
(2 in stock)
jonsered 49sp chainsaw crankcase tank chassis housing half - right, clutch side
Part: right, clutch side of the crank case tank chassis housing. Includes the bar studs and nuts Part # 504 44 00-10 and 504 02 49-02 Condition: good used/working shape Fits: Jonsereds 49 sp
(2 in stock)
jonsered 49sp chainsaw crankcase tank housing chassis half - left, flywheel side
Part: left flywheel side of the crank case tank chassis housing Part # 504 44 00-17 Condition: good used/working shape. Some minor oxidation/pitting Fits: Jonsereds 49 sp
(1 in stock)
olympic 251 chainsaw crankcase plate pn 5000353
Part: crankcase seal plate Part # 50.00353 Condition: good used/working shape Fits: Oleo Mac Olympyk 251
(1 in stock)
poulan 47 chainsaw crankcase oil tank assembly pn 1347
Part: crank case housing / oil tank Part # 1347 Condition: good used/working shape Fits: Poulan 47
(1 in stock)
skil 1612 chainsaw engine pan
Part: engine bottom pan Part # 100020 Condition: good used/working shape Fits: Skil 1612
(1 in stock)
homelite 340 chainsaw crankcase engine pan
Part: crank case engine pan bottom Condition: good used/working shape Fits: Homelite 340
(1 in stock)
jonsered 2036 turbo chainsaw crankcase tank chassis
Part: crank case tank chassis with bar stud set Condition: good used/working shape Fits: Jonsered 2036 turbo
(1 in stock)
poulan pro 295 chainsaw crankcase chassis tank housing
Part: tank housing, chassis with bar stud / bolt set Condition: good used/working shape Fits: PP 295
(2 in stock)
jonsered 451 ev chainsaw crankcase half- left flywheel side
Part: crankcase housing half - left flywheel side Condition: good used/working shape Fits: jonsereds 451ev
(1 in stock)
poulan pro 295 chainsaw crankcase engine pan
Part: crank case engine pan bottom Condition: good used/working shape Fits: PP 295
(1 in stock)
lombard lightning crankcase engine housing
Part: crank case engine housing Condition: good used/working shape Fits: Lombard Lightning
(3 in stock)
homelite 410 chainsaw crankcase half (right, clutch side)
Part: crank case housing half with bar stud / bolt set (Right, clutch side) Condition: good used/working shape Fits: Homelite 410
homelite 410 chainsaw crankcase half (left, flywheel side)
Part: left, flywheel side of the crank case housing. Bearing is NOT good/included Condition: good used/working shape Fits: Homelite 410
(4 in stock)
homelite 410 chainsaw crankcase bolt set
Part: set of bolts for the crankcase Condition: good used/working shape Fits: Homelite 410
(1 in stock)
echo cs-500evl chainsaw crankcase half with bar stud set
Part: crank case half - right, clutch side. with the bar studs/bolt set Condition: good used/working shape Fits: echo cs 550 evl
(2 in stock)
dolmar 112, 114 chainsaw crankcase half-flywheel side
Part: crank case half housing, flywheel side Condition: good used/working shape Fits: Dolmar 112, 114
(1 in stock)
echo cs-650evl chainsaw right side crankcase half with bar stud set
Part: crank case half with bar studs/bolts Condition: good used/working shape Fits: Echo CS 650 evl / 650evl
(1 in stock)
stihl 032 chainsaw crankcase half
Part: crank case half -bare bones Condition: good used/working shape Fits: Stihl 032
(1 in stock)
echo cs-601 chainsaw crankcase half
Part: crank case half - bare bones Condition: good used/working shape Fits: Echo CS 601
husqvarna 575 xp chainsaw case pin set of 4
Part: set of 4 case pins, part # 501 27 08-01 Condition: good used/working shape Fits: Husqvarna 575xp
(1 in stock)
echo cs-360t chainsaw crankcase engine pan
Part: crank case engine housing pan with bolt set Condition: good used/working shape Fits: Echo CS 360T / 360 T
(1 in stock)
echo cs-340 chainsaw crankcase engine pan
Part: crank housing engine pan bottom with bolt set Condition: good used/working shape Fits: Echo CS 340
(1 in stock)
poulan built craftsman 42cc, 18" model # 358.350670 chainsaw crankcase pan
Part: crank case pan/bottom. Part # 530-057941 Condition: good used/working shape Fits: Poulan built 42cc, 18" Craftsman chainsaws with model # 358.350670
(1 in stock)
husqvarna 136 chainsaw crankshaft with connecting rod and bearings
Part: crank shaft with connecting rod and bearings Condition: good used/working shape Fits: Husqvarna 136
olympic 284 f chainsaw crankcase housing half
Part: crank case half with bar stud set Condition: good used/working shape Fits: Olympyk 284F
(1 in stock)
stihl 021 av chainsaw crankcase pan
Part: crank case pan bottom. PN 1123 021 2500 Condition: good used/working shape Fits: Stihl 021 av
(1 in stock)
Husqvarna 32 Chainsaw Crankcase Tank
Part: Husqvarna 32 Crank Case Tank Condition: good used/working shape.
(1 in stock)
Montgomery Ward Remington SL-9 chainsaw orange crankcase cover assy
Part: orange crankcase cover assy, includes the bar stud. Part # 65064 Condition: good used/working shape Fits: Remington SL-9 Location: SL-9 bin
(1 in stock)
husqvarna 50, 51 chainsaw crankcase shield
Part: crank case shield. Part # 503 73 04-01 Condition: good used/working shape Fits: Husqvarna 51, 55.
(4 in stock)
husqvarna 51 chainsaw crankcase half - flywheel side
Part: flywheel side of the crank case housing Condition: good used/working shape Fits: Husqvarna 51, 55, 55 Rancher
(2 in stock)
partner R16 chainsaw crankcase housing half
Part: crank case housing Condition: good used/working shape Fits: Partner R-16, R-20, R-21 R2 R21 T and others 55cc
(1 in stock)
echo cs-501vl chainsaw crankcase
Part:crank case Fits: Echo CS 501vl / 501 vl Condition: good used/working shape
(1 in stock)
homelite 350 chainsaw crank back plate & bearing
Part: crank back plate and bearing Condition: good used/working shape Fits: Homelite 350
(1 in stock)
homelite 350 chainsaw crankcase engine housing with bolts
Part: crank case housing with bar bolt set Condition: good used/working shape Fits: Homelite 350
(1 in stock)
remington mighty mite chainsaw crankcase tank
Part: crank case tank body Condition: good used/working shape Fits: Remington Mighty Mite
(1 in stock)
remington mighty mite chainsaw crankcase cover
Part: crank case cover with bearing Condition: good used/working shape Fits: Remington Mighty Mite
(2 in stock)
roper built craftsman 3.7 chainsaw drivecase carrier with bearing
Part: drivecase carrier with keystone bearing Condition: good used/working shape. Has a small/minor chip on edge Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(3 in stock)
remington super 754 chainsaw crankcase cover - fan side
Part: crank case cover, fan side Condition: good used/working shape Fits: Remington Super 754
(1 in stock)
roper built craftsman 3.7 chainsaw crankcase and bar studs
Part: crank case with bar stud / bolt set Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(1 in stock)
jonsered 2141 turbo chainsaw crankcase bottom
Part: crank case bottom pan Condition: good used/working shape Fits: Jonsered 2141 Turbo
(1 in stock)
echo cs 351 vl chainsaw crankcase half flywheel side
Part: crank case half (flywheel side) Condition: good used/working shape Fits: Echo CS-351vl