poulan built craftsman 14" chainsaw clutch cover part # 530-037803
Part: clutch/bar clamp cover with nuts and chain tensioner assembly. Part # 530037803 Condition: good used/working shape Fits: Poulan built Craftsman 14" chainsaws
Craftsman 2.0 chainsaw gas tank
Fuel tank. Part number 23819, 530-023819, 53023819 In good used shape Fits poulan built craftsman 2.0 cid chainsaws 10" 12" etc.
poulan built craftsman 2.3, 16" chainsaw starter recoil cover and pulley assembly (red)
Part: starter housing cover with pulley and rewind spring Condition: good used/working shape. Fits: Poulan built craftsman 2.3, 16" models
Craftsman 2.0 model # 358.355120 Chainsaw starter recoil cover and pulley assembly
Part: starter/recoil cover and pulley assembly Condition: good used/working shape Fits: Poulan built Craftsman 2.0 chainsaws with model # 358.355120
roper built craftsman 3.7 chainsaw air filter cover #1
Part: air filter cover 9919R Condition: good used/working shape with no breaks-is faded Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw reed valve assembly
Part: reed valve assembly Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
poulan built craftsman 3.7 chainsaw clutch cover
PART: clutch cover sprocket guard CONDITION: good used/working order , cover may be red or gray FITS: poulan built craftsman 3.7 chainsaws, will fit on Poulan 3400 3700 3800 4000
roper built craftsman 3.7 chainsaw ignition coil
Part: ignition coil. Part # 808J Condition: good used shape. Tested and works with strong spark. Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw clutch sprocket assembly
Part: clutch assembly, includes the rim sprocket / drum, the clutch mechanism, the bearing, and washer Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw throttle trigger lever #2
Part: throttle trigger lever. PN 9118H1 Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
Craftsman 2.3 Chainsaw Fuel / gas Tank
Part: Fuel tank 25143, 530025143, 530-025143, 530010772, 530-010772 10772 Condition: Good used/working condition with no breaks or leaks Fits: Craftsman 2.3 and others
craftsman 2.0 14" chainsaw starter recoil cover and pulley assy
Part: starter housing cover with pulley, spring and grip. Pulley may be either plastic or metal Condition: good used/working shape Fits: Craftsman 2.0, 14"
roper built craftsman 3.7 chainsaw handle bar av buffer mount #3
Part: handle bar av buffer mount Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
Craftsman 2.0 Chainsaw Air Filter Cover type 1
Part: Air filter/carburetor cover and choke knob Condition: Good used/working condition Fits: Craftsman 2.0
(3 in stock)
Poulan Craftsman 3.7 Chainsaw Hand Guard Handle
Part: hand guard Condition: good used/working shape-no breaks Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 series chainsaws.
poulan built craftsman 3.7 chainsaw rear trigger handle assembly
Part: rear handle housing with throttle trigger and safety lever interlock. May be red or black. Condition: good used/working order Fits: Poulan built Craftsman 3.7, 3.4, 18" 20"
(2 in stock)
roper built craftsman 3.7 chainsaw guide bar plate (early model type)
Part: inner or outer guide bar plate Condition: good used/working order Fits: early model (older) Roper built craftsman 3.7 models
roper built craftsman 3.7 chainsaw starter pulley and rewind spring set
Part: starter pulley. PN 9171H Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
roper built craftsman 3.7 chainsaw bar chain tensioner type 2
Part: chain tensioning screw and bar adjusting nut Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
roper built craftsman 3.7 chainsaw fuel cap (late model)
Part: fuel / gas cap Condition: good used/working shape Fits: many models of Roper built Craftsman 3.7 chainsaws
craftsman 1.9 and poulan xx chainsaw tillotson hu22a carburetor
Part: tillotson HU 22A carburetor Condition: good used physical condition-may need a carb rebuild kit Fits: craftsman 1.9 and poulan XX models
craftsman model # 316.350840 55cc chainsaw oil pump assembly
Part: oil pump with worm drive gear MC-9228-3108, MC92283108 Condition: good used/working shape Fits: craftsman model # 316.350840 55cc chainsaws, Mcculloch 4600 4618 4620
poulan built craftsman model # 358.355061 chainsaw clutch cover with guard
Part: clutch cover/ bar clamp with guard shield - part #s 530-012131 and 530-025529 Condition: good used/working shape. Fits: poulan built craftsman chainsaws with model # 358.355061. 2.3 16", 358.355140, 358.357180
poulan built craftsman 42cc, 18" model # 358. 350670 chainsaw clutch cover
Part:clutch sprocket cover Condition: good used/working shape, color may vary Fits: Poulan built 42cc 40cc, 18" Craftsman chainsaws with model # 358.350670
roper craftsman 3.7 chainsaw air filter
Part: air filter Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
Craftsman 18" 40cc Chainsaw Sim-Pul Starter assembly
Starter recoil rewind starter assembly with cover, pulley, cog and springs. Built with Sim-Pul ton technology. In good used shape Fits many Poulan built Craftsman chainsaws
Craftsman 358.352380 Chainsaw Ignition Coil
Phelon, solid state electronic ignition coil. Part number 530-069403, 530069403, 69403 Tested, in good used shape Fits Poulan and Craftsman 358.352380, 2400
roper built craftsman 3.7 chainsaw air filter cover and filter set
Part: air filter cover, knob and air filter Part # 9121H, 9166H, 9103H Condition: good usable condition Fits: Craftsman built Roper 3.7 chainsaws with model # 917.351090 and some other model #s
poulan built craftsman 3.7 chainsaw starter cover and pulley assembly (Red)
Part: starter fan housing recoil cover with pulley and rewind spring Condition: good used/working shape Fits: Poulan 3400 built Craftsman 3.7 3.4, 18" 20"
craftsman 2.0, 2.1, 2.3 and poulan micro xxv chainsaw starter pulley (micro bin)
Part: starter pulley spool in good used/working shape. Fits: Craftsman 2.0, 2.1, 2.3 and Poulan Micro XXV 1800 2000 2300 models
poulan built craftsman 42cc, 18" model # 358.350670 chainsaw fuel cap
Part: fuel/gas cap with O ring and duckbill valve Condition: good used/working shape Fits: Poulan built Craftsman 42cc, 18" chainsaws with model # 358.350670
craftsman 33cc, 14", 2.0cid chainsaw starter recoil cover and pulley assembly
Part: starter housing cover (PN 530-049336) with pulley (PN 530-037817), and spring Condition: good used/working shape Fits: Craftsman 14", 2.0 cubic inches, 33cc chainsaws, 16", 18"
roper built craftsman 3.7 chainsaw bar plates set (for late models)
Part: set of plates, inner plate & outer plate Condition: good used/working order Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. Late / new models.
(2 in stock)
Craftsman 2.0 10", 12" & 14" Chainsaw Clutch Side Cover Case #1
clutch cover side case only-no other parts included good used shape with no breaks Fits the Following Models: Craftsman 2.0 12”, Craftsman 2.0 14"
roper built craftsman 3.7 chainsaw tillotson hs 200a carburetor and bolts
Part: tillotson hs-200a, hs200a carburetor with bolts Condition: good used physical shape, may need a carb rebuild kit Fits: some models of Roper built Craftsman 3.7 models 917.353770 and others
Craftsman 358.352380 chainsaw walbro WT247 carburetor
WT 247 walbro carb In good used shape, may or may not need fresh gasket and diaphram kit installed Fits Poulan Craftsman 358.382380
craftsman 55cc chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring and grip Condition: good used/working shape Fits: Craftsman 55 cc incredi-pull
roper built craftsman 3.7 chainsaw throttle link #1
Part: throttle link Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
craftsman 2.0 chainsaw muffler
Part: muffler Condition: Good used/working condition Fits: Craftsman 2.0, 10"/12"/14" with model #s 358.352050, 358.352010 and others
Roper Built Craftsman 3.7 Air Filter Cover #2
Part: Air filter #2 Condition: Good used/working shape Fits: Roper built Craftsman 3.7 w/ model # 917.353760
Poulan Built Craftsman 3.7 Top Cover (black)
Part: Top cover / cylinder shroud. PN 25555 24227 Condition: Good used/working shape. Has some fading. Fits: Poulan built Craftsman 3.7 with model # 358.354830 and others
Craftsman 2.0 Chainsaw Oil Cap #1
Part: oil cap Condition: Good used/working condition Fits: Craftsman 2.0, 10"/12"/14" with model #s 358.352050, 358.352010 and others
craftsman 3.7 chainsaw fuel / gas tank
Part: fuel tank Condition: good used/working shape with no breaks or leaks Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(1 in stock)
Poulan 2000 Chainsaw Muffler Guard
Part: muffler cover shield 25259, 530025259, 530-025259 Condition: good used/working shape Fits: Poulan 2000 2300 2300cva 23 cva, and other poulan pro and craftsman models
Poulan built craftsman 3.7 chainsaw starter cover and pulley assembly (Grey)
Part: starter fan housing recoil cover with pulley and rewind spring Condition: good used/working shape Fits: Poulan 3400 built Craftsman 3.7 3.4, 18" 20"
roper built craftsman 3.7 chainsaw manual oiler (early model / old style)
Part: manual oil pump oiler plunger Condition: good used/working order Fits: Roper built Craftsman 3.7 early model / old style chainsaws 917.353760 and others
roper built craftsman 3.7 chainsaw muffler assembly
Part: muffler exhaust assembly 676a8 Condition: good used/working order Fits: Roper built Craftsman 3.7 chainsaw models
roper built craftsman 3.7 chainsaw tillotson hs 79a carburetor
Part: tillotson HS 79a / HS-79a HS79a HS79 carburetor with screws and intake manifold Condition: good used physical shape, may need a carb rebuild kit Fits: some models of Roper built Craftsman 3.7 chainsaws
craftsman 55cc model # 316.350480 chainsaw complete chainbrake assembly
Part: complete chainbrake, includes the clutch cover, hand guard, brake band, spring, mechanism, cover, spike, chain catcher Condition: good used/working order Fits: Craftsman 55cc, model # 316.350480
craftsman 16", 36cc chainsaw complete starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring, grip Condition: good used/working order Fits: Craftsman 16in., 36cc and some other models
craftsman 55cc, model # 316.350480 chainsaw top wrap handle bar
Part: handlebar Part # mc-9228-31b202 Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, Mcculloch MS1846av, MS 1846av, MS1846 AV, 1846 may also fit other models
craftsman 55cc, model # 316.350480 chainsaw walbro wt-769 carburetor with boot
Part: walbro wt769 carburetor with boot Condition: good used physical shape, may need a carb rebuild kit Fits: Craftsman 55cc model # 316.350480, may also fit other models
(3 in stock)
roper built craftsman 3.7 chainsaw red, early model starter recoil cover and pulley assembly
Part: starter housing cover with pulley and rewind spring. Condition: good used/working shape Fits: Old style (early model) Roper built craftsman 3.7 chainsaws with model #s 917.353760 & 917.35761. May also fit other models
craftsman 2.0 chainsaw chain tensioner adjuster
Part: chain adjust screw, nut and pin. Condition: good used/working shape Fits: Craftsman 2.0 chainsaw with models #s 358.352050, 358.352010 and others.
craftsman 2.0 chainsaw fuel cap
Part: gas cap Condition: Good used/working condition Fits: Craftsman 2.0, 10"/12"/14" with model #s 358.352050, 358.352010 and others
craftsman 16" 2.0 cu chainsaw starter cover and pulley assembly
Part: starter/recoil housing cover with pulley Condition: good used/working shape Fits: Sears Craftsman 16" , 20 cubic inches
roper built craftsman 3.7 chainsaw throttle link rod #2
Part: throttle link rod Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760. May also fit other models
Roper Built Craftsman 3.7 chainsaw oil lever
Part: oil oiler lever button Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
craftsman 42cc, 18"/20" chainsaw hand guard
Part: hand guard / brake handle Condition: good used/working shape Fits: Craftsman 42cc, 20" & 18" chainsaw
craftsman 3.7 chainsaw decompression valve
Part: decompression valve Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
craftsman 3.7 chainsaw ignition off switch and wire
Part: ignition off switch and wire Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw hand guard handle
Part: hand guard 771J Condition: good used/working shape with no breaks-has some paint loss Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
Poulan Craftsman 3.7 Chainsaw Intake Manifold
Part: Intake manifold Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 series chainsaws.
(1 in stock)
Poulan Craftsman 3.7 Chainsaw Handle Bracket Brace
Part: handle bracket brace. PN 11865 Condition: good used/working shape Fits:Craftsman 3.7 chainsaws with model #358.356080 and others. Also fits some Poulan 3400-4000 sereies chainsaws.
Craftsman Roper D44 Chainsaw Ignition Coil Kit
Complete ignition kit includes: coil module, breaker points, condenser, and some wiring. 610706, 610707, 610708 Tested, in good used shape Fits many 917. series David Bradley, Roper, Craftsman, Sears D-44 series and other with Tecumseh power products engine.
Craftsman 20" 46cc chainsaw complete starter/recoil and pulley assembley
Part: Starter cover, includes a pulley spring and pulley grip. Red or Green in color. Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with standard starter pulley
Craftsman Roper 3.7 Chainsaw Points Type Ignition
Points type ignition complete. Includes coil, points, condenser, wiring and mounting unit. 9260H Tested, in good used shape Fits older Craftsman 917. model series 3.7 cid roper built chainsaws with points type ignition
roper built craftsman 2.5 15" chainsaw fuel/gas tank
Fuel tank with cap 667A109 In good used shape Fits Roper Craftsman 15" 2.5cid 917.352550 and others
Craftsman 42cc Chainsaw EZ Adjust Clutch cover Assembly
Clutch cover with chain tensioner assembly and tightening knob In good used shape Fits Craftsman 42cc 18", Poulan 4218 and many others
roper built craftsman 3.7 chainsaw oil cap (early model)
Part: oil cap with O ring Condition: good used/working order Fits: Roper built Craftsman 3.7 early model (older) chainsaws
Craftsman 358.352380 chainsaw rear handle tank assembly
Rear handle tank assembly with cap, trigger parts, and throttle cable 530-014760 In good used shape Fits Poulan and Craftsman chainsaws.
craftsman 55cc, model # 316.350480 chainsaw muffler assembly
Part: muffler kit - includes the bolts, nuts, and plate Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, Mcculloch ms1846av, MS 1846av, MS1846 AV, 1846 may also fit other models
craftsman 55cc, models # 316.350480 chainsaw flywheel assembly
Part: flywheel with starter pawls. Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, may also fit other models
craftsman 55cc, model # 316.350480 chainsaw intake manifold rubber boot kit
Part: intake manifold / carburetor boot kit Condition: good used/working order Fits: MTD Mcculloch Craftsman 55cc 46cc model # 316.350480, 4600, MS1846av, may also fit other models
poulan built craftsman 3.7 chainsaw flywheel and starter pawl assembly
Part: flywheel with starter pawls, spring, studs Condition: good used/working order Fits: Poulan built Craftsman 3.7 models
craftsman 1.9 and poulan xx chainsaw air filter
Part: air filter element Part # 23501 Condition: good used/working order Fits: Craftsman 1.9, Poulan xx
(1 in stock)
poulan built craftsman model # 358.356240 chainsaw ignition coil
Part: phelon ignition coil Part # 530-039143 Condition: good used/working order. Tested and works with strong spark. Fits: Poulan built Craftsman model # 358.356240 poulan pro 255 chainsaw and some other models
poulan built craftsman 2.0 chainsaw lot of assorted hardware
Part: lot of misc. hardware - screws / bolts (includes everything pictured) Condition: good used/working shape Fits: Poulan built craftsman 2.0 chainsaws (poulan micro xxv equivalent)
poulan built craftsman model 358.356204 chainsaw rear trigger handle
Part: rear trigger handle housing Part # 530-036087 Condition: good used/working shape. plastic dinged/scuffed Fits: Poulan built craftsman chainsaw models with model # 358.356240
poulan built craftsman 42cc, 18" model # 358.350670 chainsaw filter base and switch
Part: filter mount base (PN 530-057892) & stop switch (PN 530-057891) Condition: good used/working shape Fits: Poulan built Craftsman 42cc,18" model # 358.350670
roper built craftsman 3.7 chainsaw spring shield set
Part: spring shield plate set Condition: good used/working shape Fits: Old style. Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
roper built craftsman 3.7 chainsaw bar nut set
Part:set of 2 bar nuts Condition: good used/working shape Fits: Old style. Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
(3 in stock)
roper built craftsman 3.7 chainsaw white, early model starter recoil cover and pulley assembly
Part: starter housing cover with pulley, spring and grip Condition: good used/working shape Fits: Old style (early model) Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
(1 in stock)
roper built craftsman 3.7 chainsaw flywheel and starter pawls
Part: flywheel and starter pawls Condition: good used/working shape. No broken fins Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. 917.353760 May also fit other models.
roper built craftsman 3.7 chainsaw oil pump diaphragm
Part: oil pump plunger diaphragm Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw starter rewind spring
Part: rewind coil spring. PN 9117H Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760. May also fit other models
(1 in stock)
roper built craftsman 3.7 chainsaw oil cap (late model)
Part: oil cap Condition: good used/working shape Fits: many models of Roper built Craftsman 3.7 chainsaws
poulan craftsman 3.7 chainsaw starter cover air baffle
Part: starter cover shield / air baffle. PN 24232 Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 series chainsaws.
Craftsman 14" Chainsaw Flywheel w/ Starter Pawls
Part: Flywheel w/ starter pawls Condition: Good used/working condition. No broken fins Fits: Craftsman 14" (Poulan built) 2.2 cid Model 358.351142
roper built craftsman 3.7 chainsaw late, red model starter / recoil cover and pulley assembly
Part: starter cover with the pulley and spring Condition: good used/working shape with no breaks-some paint loss Fits: late model (newer) Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
craftsman 3.7 chainsaw idle adjustment screw
Part: idle adjustment screw Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
Poulan Craftsman 3.7 Chainsaw Fuel/Gas Cap
Part: fuel cap Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080.
Poulan Craftsman 3.7 Chainsaw Ignition Off Switch & Wire
Part: ignition off switch and wire Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 series chainsaws.
Craftsman 3.7 Chainsaw Old Style White Air Filter Cover
Air filter cover 2922R Pretty beat up and broken Fits older Roper built Craftsman 3.7 cid chainsaws.
Roper built craftsman 3.7 chainsaw starter pawls
Part: set of start pawl and springs 643A14 Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
craftsman 3.7 chainsaw ignition off switch type #2 with wire
Part: ignition off switch throttle lock decompression activation lever 8516R and wire Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws
Craftsman Roper Chainsaw Prestolite Ignition Coil
Prestolite solid state ignition coil module. 3558j Tested, in good used shape Fits many Roper built Craftsman chainsaws. 3.4 3.1 3.7
Craftsman 18" 42cc Chainsaw Sim-Pul Starter assembly
Starter recoil rewind starter assembly with cover, pulley, cog and springs. Built with Sim-Pul ton technology. In good used shape Fits many Poulan built Craftsman chainsaws
Roper built craftsman 3.7 chainsaw bar plates set (for early models)
Part: set of plates, inner plate & outer plate Condition: good used/working order Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers