Craftsman Roper Chainsaw Prestolite Ignition Coil
Prestolite solid state ignition coil module. 3558j Tested, in good used shape Fits many Roper built Craftsman chainsaws. 3.4 3.1 3.7
Craftsman 18" 42cc Chainsaw Sim-Pul Starter assembly
Starter recoil rewind starter assembly with cover, pulley, cog and springs. Built with Sim-Pul ton technology. In good used shape Fits many Poulan built Craftsman chainsaws
Roper built craftsman 3.7 chainsaw bar plates set (for early models)
Part: set of plates, inner plate & outer plate Condition: good used/working order Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers
poulan built craftsman 2.3, 14" chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley and rewind spring Condition: good used/working shape. Fits: Poulan built craftsman 2.3, 14" models 358.353660
(2 in stock)
Craftsman D-44 Chainsaw Clutch Cover
Clutch and bar cover In good used shape. Does NOT include bar nuts. Fits Craftsman Sears, Roper built D-44 and D-49, D44, D49 and others
Craftsman D-44 Chainsaw Starter Assembly
Starter cover, recoil rewind assembly complete. In good used shape Fits Craftsman Sears Roper D44, D49, D-44, D-49 and others
Craftsman Roper D-44 Chainsaw Stack Type Muffler
Stack type muffler with gasket and hardware In good used shape Fits Sears Craftsman Roper Built D-44 D44 chainsaw
Craftsman 2.8ci 18" Chainsaw Starter Assembly
Starter recoil rewind cover assembly. Includes cover, pulley and spring. In good used shape Fits Poulan built craftsman 2.8 cid 18" and others 358.... model series
Craftsman Roper D-44 Chainsaw Power Products Carb
Lauson Power Products Carburetor assembly In good used shape, may or may not need fresh gasket and diaphrgam installed Fits many 917. model Sears D44 chainsaws
roper built craftsman 3.7 chainsaw piston, cylinder and connecting rod kit (early model / old style)
Part: cylinder with piston, rings, connecting rod, wrist pin, decompression valve Condition: good used/working order. Came off a saw with good compression, no breaks Fits: roper built Craftsman 3.7 early model / old style chainsaws
roper built craftsman 3.7 Ranger chainsaw rear handle assembly BLUE
Part: rear handle housing with manual oil pump oiler Condition: good used/working order Fits: roper built Craftsman 3.7 Ranger, sportster and other models
roper built craftsman 3.7 Ranger chainsaw complete rear handle assembly
Part: rear handle housing with oil cap, throttle trigger, choke manual oil pump oiler, throttle link, off button Condition: good used/working order, minor chip on front edge of air box Fits: roper built Craftsman 3.7 Ranger models
poulan built craftsman 46cc 20" chainbrake assembly
Part: clutch cover, chainbrake assembly. Complete with brake handle, band, and mechanism Condition: good used/working shape may be red or green Fits: poulan built craftsman 46cc, 20" with model # 358.355060 chainsaws and some other models
craftsman 55cc, model # 316.350480 chainsaw top cover shroud
Part: top cover cylinder shroud Part # mc-9228-310216 Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, may also fit other models
poulan built craftsman model # 358.356240 chainsaw starter recoil cover and pulley assembly
Part: starter fan housing cover with pulley, rewind spring and grip Part # 530-014471, 530-015891, 530-069313, 530-027569 Condition: good used/working order Fits: Poulan built Craftsman model # 358.356240 chainsaws and some other models
craftsman 1.9 and poulan xx chainsaw carb intake manifold adapter
Part: carb intake manifold adapter Part # 23515 Condition: good used/working order Fits: Craftsman 1.9 and Poulan xx / 20
poulan built craftsman 1.9 chainsaw air filter cover
Part: air filter cover Part # 11212 Condition: good used/working shape Fits: Craftsman 1.9
(1 in stock)
poulan built craftsman model # 358.351480 chainsaw cylinder av spring mount
Part: av spring mount for the cylinder 530069384, 530-069384 Condition: good used/working shape Fits: Poulan built craftsman models with model # 358.351480 and some others
craftsman 18", 42cc chainsaw starter recoil cover only (black)
Part: starter fan housing cover only Condition: good used/working shape Fits: Craftsman 18", 42cc and some other models
(3 in stock)
roper built craftsman 3.7 chainsaw clutch cover model # 917.353760 (early model,black)
Part: clutch cover/chain shield with actuating arm/knob mechanism. Condition: good used/working shape Fits: roper built craftsman 3.7 models with models #S 917.353760, 917.35761 and some others
poulan built craftsman 42cc, 18" chainsaw starter pulley
Part: starter pulley Condition: good used/working shape Fits: Poulan built Craftsman 42cc, 18" chainsaws
poulan built craftsman 18", 40cc chainsaw chain tensioner
Part: chain adjust screw, pin Condition: good used/working shape Fits: Poulan built Craftsman 18", 40cc and some other models
poulan built craftsman 42cc, model # 358.350670 chainsaw oil pump kit
Part:oil pump/oiler kit Condition: good used/working shape Fits: Poulan built, 42cc chainsaws with model # 358.350670
poulan built craftsman 42cc, 18" model # 358.350670 chainsaw zama carburetor
Part: Zama carburetor Condition: good used physical shape. May need a carb rebuild kit. Fits: Poulan built Craftsman 42cc, 18" chainsaws with model # 358.350670
(1 in stock)
poulan built craftsman 42cc, 18" model # 358.350670 chainsaw oil cap
Part: oil cap Condition: good used/working shape Fits: Poulan built Craftsman 42cc, 18" chainsaws with model # 358.350670
roper built craftsman 3.7 chainsaw inner bar plate (late model)
Part: inner bar plate Condition: good used/working shape Fits: Roper built Craftsman 3.7 chainsaws with models #s 917.353770, 917.353771 and some other models
roper built craftsman 3.7 chainsaw walbro sdc carburetor
Part: Walbro SDC carburetor Condition: good used physical shape. May or may not need a carb rebuild kit. Fits: some models of Roper built Craftsman 3.7 chainsaws.
roper built craftsman 3.7 chainsaw clutch rim sprocket only
Part: clutch sprocket / drum. Part # 642A35 with new .325 x 7 tooth rim sprocket installed Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw intake manifold adapter
Part: intake manifold adapter Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw rear trigger handle frame #2
Part: rear trigger handle frame. Includes rubber mount only and trigger. Does not include any other part.s Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(3 in stock)
roper built craftsman 3.7 chainsaw rear trigger handle grip
Part: rear trigger handle grip. PN 9104H Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
roper built craftsman 3.7 chainsaw pulley grip handle
Part: pulley grip handle. PN 642A198 Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
craftsman 2.3 16" chainsaw starter recoil cover only
Part: starter housing cover only Condition: good used/working shape Fits: Craftsman 2.3 16" chainsaw
craftsman 2.3 chainsaw starter rewind spring
Part: starter rewind spring Condition: good used/working shape Fits: Craftsman 2.3
roper built crafsman 3.7 chainsaw bar chain tensioner adjuster type 1
Part: chain tensioning screw and bar adjusting nut Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
poulan built craftsman 3.7 chainsaw red starter recoil cover only
Part: starter fan housing cover only. PN 11866 / 530-014403 Condition: good used/working shape Fits:Poulan built Craftsman 3.7 models. May also fit some Poulan 3400-4000 series models.
roper built craftsman 3.7 chainsaw rear trigger handle half
Part: rear trigger handle half Condition: good used/working shape Fits: Roper built Craftsman 3.7 chainsaws which model #s begin with the prefix 917 May vary in color .
Craftsman 2.0 model # 358.355120 Chainsaw muffler cover guard
Part: muffler cover Condition: good used/working shape Fits: Poulan built Craftsman 2.0 chainsaws with model # 358.355120
Craftsman 18" 2.2 cid Chainsaw Top Handle w/ Hand Guard and Spring Mount
Part: Top handle with hand guard and spring mount Condition: Good used/working shape Fits: Poulan built Craftsman 18" 2.2 cid Model # 358.351380
Craftsman 2.0 Chainsaw Air Filter Cover and Choke Type 2
Part: Air filter cover and choke. Type 2 Condition: Good used/working shape Fits: Craftsman 2.0
Craftsman 14" 2.2 Chainsaw Handguard
Part: hand guard Condition: Good used/working shape Fits: Craftsman 14" 2.2
Craftsman 14" 2.2 CID Model 358.351142 Chainsaw Top Handle
Part: Top handle Condition: Good used/working shape Fits: Craftsman 14" 2.2 CID Model 358.351142
Craftsman 2.0 Chainsaw Air Filter
Part: Air filter, part # 23791, replaced by 530-023791 Condition: Good used/working condition Fits: Craftsman 2.0, 10"/12"/14" with model #s 358.352050, 358.352010 and others
Craftsman 14" Chainsaw Choke Rod
Part: Choke Rod Condition: Good used/working condition Fits: Craftsman 14" (Poulan built) 2.2 cid Model 358.351142
Craftsman 14" Chainsaw Walbro Carb Carburetor
Part: Walbro Carb Condition: May/may not need a carb rebuild kit Fits: Craftsman 14" (Poulan built) 2.2 cid Model 358.351142
Craftsman 14" Chainsaw Muffler
Part: Muffler Condition: Good used/working condition. Has surface rust Fits: Craftsman 14" (Poulan built) 2.2 cid Model 358.351142
Craftsman 14" Chainsaw Top Cover Shroud
Part: Top cover shroud Condition: Good used/working condition Fits: Craftsman 14" (Poulan built) 2.2 cid Model 358.351142
craftsman 18" to 20", 46cc chainsaw bar plate
Part: bar plate Condition: good used/working shape Fits: Craftsman (poulan built) 18" chainsaws with model #: 358.351190 and some other models
Craftsman 18" chainsaw flywheel with starter pawls
Part: flywheel with starter pawls Condition: good used/working shape, no broken fins Fits: Craftsman (poulan built) 18" chainsaws with model #: 358.351190 and some other models
Craftsman 20" 46cc chainsaw complete EZ Pull starter/recoil and pulley assembley
Part: Starter cover, includes a pulley spring and pulley grip Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with spring assisted starer pulley
(1 in stock)
roper built craftsman 3.7 chainsaw top cover shroud
Part: top cover shroud Condition: good used/working shape-has paint loss Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(2 in stock)
Poulan Craftsman 3.7 Chainsaw Top Front Handle Bar
Part: top handle bar Condition: good used/working shape-not cracked or bent Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 series chainsaws.
craftsman 42cc, 18"/20" chainsaw chainbrake assembly
Part: chain brake chainbrake assembly with brake band, clutch cover and hand guard / brake handle Condition: good used/working shape Fits: Craftsman 42cc 18" chainsaw
Craftsman 18" 42cc Chainsaw Starter assembly
Starter recoil rewind starter assembly with cover, pulley, cog and springs. In good used shape Fits many Poulan built Craftsman chainsaws
Poulan 4218 Craftsman 42cc Chainsaw EZ Adjust Clutch cover Assembly black
Clutch cover with chain tensioner assembly and tightening knob black In good used shape Fits Craftsman 38cc 16", 42cc 18", Poulan 4218 and many others 38cc 16"
craftsman 3.7 chainsaw top front handle bar
Part: handle bar Condition: good used/working shape-not cracked or bent Fits: Roper built Sears Craftsman 3.7 chainsaws with model number: 917.353760.
Roper Craftsman 3.7 chainsaw fuel tank case assembly
Part: Fuel tank assembly with bar studs Condition: good used shape. some skuffs/paint loss Fits: Roper built Craftman 3.7 model 917.353760
Craftsman 3.7 chainsaw decompression valve for 917.353760
Part: decompression valve Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353760 May also fit other models.
Craftsman Roper 2.5 Chainsaw Electronic Ignition Assembly
Two part wico wabash electronic ignition coil assembly. 9338R In good used shape Fits Craftsman Roper 2.5, 917.352561 and others
(1 in stock)
Craftsman Roper 2.5 Chainsaw Flywheel Assembly
Wico FWM-1136 flywheel rotor assembly. 9312R In good used shape Fits Craftsman Roper 2.5, 917.352561 and others
Craftsman 55cc Incredipull series chainsaw bar nut set used
part: bar nut set (2 bar nuts) part number MC-9NAZ-5/16-18 condition used in good working order fits Craftsman incredi-pull 55 cc chainsaws mcculloch 4600
Roper built craftsman 3.7 chainsaw white plastic clutch cover
Part: clutch cover Condition: good used/working shape Fits: Some Roper built craftsman 3.7 models
Craftsman Roper Sportster Chainsaw Muffler Assembly
Older style craftsman roper 3.4 3.7 muffler exhaust assembly In good used shape Fits some older models of 3.7 3.4 3.1 CID Roper built Sears Craftsman chainsaws. Ranger, Sportster, Barracuda etc.
Craftsman 55cc, model # 316.350480 chainsaw Air Filter
Part: Air filter assembly, air cleaner. MC-9228-310204 Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, may also fit other models
Craftsman model # 316.350840 55cc chainsaw oil gear
Part: oil pump worm drive gear MC-9073-310201 Condition: good used/working shape Fits: craftsman model # 316.350840 55cc chainsaws
(2 in stock)
Craftsman 55cc model # 316.350480 chainsaw choke
Part: choke assembly MC-9228-310230, MC-9114-310202 Condition: good used/working order Fits: Craftsman 55cc, model # 316.350480, 46cc and others
Sears Craftsman D-44 Chainsaw Air Filter
Part: Air filter element Condition: Good used/working shape Fits: Sears Craftsman Roper D44 917.351050
Craftsman 20" 46cc chainsaw flywheel
Part: flywheel rotor assembly Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with model #: 358.350202 and some other models
Roper built craftsman 3.7 chainsaw black plastic clutch cover
Part: clutch cover Condition: good used/working shape Fits: Some Roper built craftsman 3.7 models
poulan built craftsman 2.3, 16" chainsaw starter recoil cover and pulley assembly (yellow)
Part: Old style starter housing cover with metal pulley and rewind spring Condition: good used/working shape. Fits: Poulan built craftsman 2.3, 16" models
craftsman 55cc, model # 316.350480 chainsaw walbro wt-463 carburetor
Part: walbro wt463 carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Craftsman 55cc model # 316.350480, may also fit other models
craftsman 55cc, model # 316.350480 chainsaw stop switch
Part: stop switch Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, may also fit other models
Craftsman Roper 3.7 Chainsaw Top handle bracket
Old style top handle bracket In good used shape Fits Roper Made Craftsman 3.7 saws
(2 in stock)
Craftsman D-44 Chainsaw Throttle trigger
Throttle trigger 5506H In good used shape Fits Sear craftsman, roper built D-44
roper built craftsman 3.7 chainsaw spur clutch assembly
Part: clutch assembly, includes the sprocket / drum 3/8 pitch 7 tooth, the ceramic clutch mechanism, the bearing, and washer Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
Craftsman Roper D-44 Chainsaw Chain Tensioner Assembly
Bar and chain tensioner adjuster assembly. With screw, lock nut, and adjuster block pin In good used shape Fits Sears Craftsman 917.351061, 917.351071 and many others. Direct Drive.
poulan built craftsman 2.3 ps chainsaw complete starer recoil cover and pulley assembly (blue)
Part: starter housing cover with pulley, rewind spring and grip Condition: good used/working order Fits: Poulan built Craftsman 2.3ps models
craftsman 2.3 chainsaw lot of assorted hardware
Part: lot of misc. hardware - screws, bolts, nuts (includes everything pictured) Condition: good used/working order Fits: Craftsman 2.3 chainsaws
roper built craftsman 3.7 chainsaw rear handle bottom plate (early model)
Part: bottom plate for the rear handle Part # 9151H Condition: good used/working order Fits: Roper built Craftsman 3.7 early (older) models
roper built craftsman 3.7 chainsaw cylinder (early model)
Part: cylinder head Condition: good used/working order, no breaks or scoring Fits: Roper built Craftsman 3.7 early model (older) chainsaws
roper built craftsman 3.7 chainsaw lot of assorted hardware (early model)
Part: lot of misc. hardware and small parts - grommet, off lever, manifold, screws, bolts (includes everything pictured) Condition: good used/working order Fits: early model (old style) Roper built Craftsman 3.7 chainsaw models
roper built craftsman 3.7 chainsaw clutch rim sprocket drum (with bearing and rim)
Part: 3/8-7 clutch sprocket drum with new replacement rim and needle bearing Condition: good used/working order Fits: Roper built Craftsman 3.7 models
(2 in stock)
roper built craftsman 3.7 chainsaw clutch cover Power Sharp #2
Part: bolt action power sharp clutch cover/ chain shield with actuating arm Condition: good used/usable the power sharp mechanism DOES NOT WORK Fits: some early (older models) of Roper built Craftsman 3.7 models
poulan built craftsman model # 358.795630 trimmer / bushwacker cylinder head pn 530-069614 poulan bin 1
Part: cylinder head Part # 530069614 Condition: good working order Fits: Craftsman model # 358795630 bushwacker models
poulan built craftsman 3.3 model # 358.356330 chainsaw walbro hda 49 carburetor with bolts
Part: walbro hda-49 carburetor with studs Part # 530-035201, 530-015735 Condition: good used physical order, may need a carb rebuild kit Fits: poulan built Craftsman 3.3, model # 358.356330 chainsaws
poulan built craftsman model # 358.350660 chainsaw top wrap handlebar
Part: top / front handle bar Part # 530-056798 Condition: good used/working order Fits: Poulan built Craftsman 358.350660 models. May also fit other models
poulan built craftsman model # 358.350660 chainsaw switch lever with spring and wires
Part: switch lever, spring, wire harness Part # 530-038227 Condition: good used/working order Fits: Poulan built craftsman model # 358.350660. May also fit other models
(4 in stock)
roper built craftsman 3.7 chainsaw fuel cap (early model)
Part: fuel / gas cap Condition: good used/working shape Fits: many models of Roper built Craftsman 3.7 chainsaws
roper built craftsman 3.7 chainsaw clutch cover (early model, white)
Part: clutch cover/ chain shield with actuating arm/knob mechanism Condition: good used/working order-power sharp knob has a crack Fits: some early (older models) of Roper built Craftsman 3.7 models
roper built craftsman 3.7 chainsaw tillotson hs 143b
Part: tillotson HS-143 b carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Roper built Craftsman 3.7 with model # 917.353760 and some other models
craftsman 55cc, model # 316.350480 chainsaw lot of assorted hardware and small parts
Part: lot of misc. hardware / small parts- includes the primer bulb, grommet, bracket, screws, button (everything pictured) Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, may also fit other models
(1 in stock)
craftsman 55cc, model # 316.350480 chainsaw air filter cover
Part: air filter cover Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, may also fit other models
(1 in stock)
poulan built sears craftsman model # 358.355051 chainsaw bar clamp clutch cover
Part: bar clamp Part # 12131, 530-071854 Condition: Has a crack on center of cover as pictured, good usable order with no breaks around the bolt holes Fits: Poulan built Craftsman model # 358.355051 chainsaw and some other models
poulan built craftsman model # 358.356240 chainsaw oil pump
Part: oil pump oiler Condition: good used/working order Fits: poulan built craftsman 358.356240 model and some other models
poulan built craftsman 358.356240 chainsaw rear and top handle with trigger parts and mounts kit
Part: rear trigger handle assembly with top front handle, front and lower av spring isolators, rear handle isolator spring, throttle cable, trigger and safety lever lockout Part # 530-036097 (substitution 530-036097), 530-036098 (substitution 530-036098) 530-036087 (substitution 530...
poulan built craftsman model # 358.356240 chainsaw phelon flywheel and starter pawls
Part: flywheel and starter pawl / stud / spring set Condition: good used/working order Fits: Poulan built Craftsman model # 358.356240 chainsaws. May also fit other models
poulan built craftsman model # 358.356240 chainsaw walbro wt 202 carburetor and choke set
Part: wt202 carburetor with choke rod and grommet Condition: good used/working order Fits: Poulan built Craftsman model # 358.356240 chainsaws. Poulan Pro 255 May also fit other models
(3 in stock)
craftsman 2.0 chainsaw rear trigger handle housing #2 red/orange
Part: rear trigger handle housing with throttle trigger and link and handle cover. Comes in orange or red in color. Condition: good used/working shape Fits: poulan built craftsman 2.0 chainsaw models. Is the equivalent of Poulan micro models
craftsman 2.0 chainsaw top handle bar only
Part: top wrap handle bar Condition: good used/working shape Fits: Craftsman 2.0