(1 in stock)
Craftsman 20" 46cc chainsaw top cover with hand guard
Part: top cover with hand guard Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with model #: 358.350202 and some other models
(2 in stock)
Craftsman Roper 2.5 Chainsaw Starter Assembly
Starter recoil rewind assembly includes: cover, plastic pulley, spring and clip. In good used shape Fits Roper built craftsman 2.5cid
(2 in stock)
craftsman 55cc, model # 316.350480 chainsaw air intake
Part: air filter mount intake, with carb bolts Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, may also fit other models
(1 in stock)
Craftsman Roper D-44 Chainsaw Rear handle engine shroud
Bottom rear handle, engine shroud 6119-H In good used shape Fits Sears Craftsman Roper Built D-44 chainsaw
(1 in stock)
roper built craftsman sportster chainsasw muffler cover front
Part: muffler front Condition: good used/working order Fits: Craftsman built Roper Sportster chainsaws
(1 in stock)
poulan built craftsman model # 358.350660 chainsaw heat shield and clip
Part: cylinder heat shield Part # 530-055183 Condition: good used/working order Fits: Poulan built craftsman model # 358.350660. May also fit other models
(1 in stock)
craftsman roper chainsaw starter spring shield set
Part: set of shield plate for the starter Condition: good used/working order Fits: Craftsman built roper sportster chainsaws
(1 in stock)
poulan built craftsman 18", 2.2cid model # 358.352380 chainsaw clutch cover clamp
Part: clutch cover housing / bar clamp Part # 530-037011 Condition: good used/working order Fits: Poulan built Craftsman 18", 2.2cid with model # 358.352380 (may also fit other models #s)
craftsman 3.4 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring Condition: good used/working order Fits: came off a craftsman 3.4 model, will also fit 3.7 models
poulan built craftsman 3.4, 3.7 chainsaw top cover shroud (red)
Part: top cover engine shroud Part # 24227 Condition: good used/working order Fits: Poulan built Craftsman 3.4 and 3.7 models
(1 in stock)
roper built craftsman 3.7 chainsaw tillotson hs 143b
Part: tillotson HS-143 b carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Roper built Craftsman 3.7 with model # 917.353760 and some other models
(1 in stock)
craftsman 55cc, model # 316.350480 chainsaw av spring isolator mount set
Part: av spring mount set for the handles Condition: good used/working order Fits: Craftsman 55cc model # 316.350480, may also fit other models
(3 in stock)
poulan built craftsman 1.9 chainsaw starter housing cover
Part: starter fan housing cover Part # 28238 Condition: good used/working order Fits: Poulan built craftsman 1.9 chainsaw
(1 in stock)
craftsman 2.0 chainsaw connecting rod
Part: connecting rod Condition: good used/working order Fits: Craftsman 2.0
poulan built craftsman model # 358.356240 chainsaw air filter and base assembly
Part: air filter with base and screws Part # 530-036124 Condition: good used/working order Fits: Poulan built craftsman model # 358.356240 chainsaw. May also fit other models
(1 in stock)
poulan built craftsman model # 358.356240 chainsaw ignition off switch and wires
Part: off switch with wires harness Part # 530-036112 Condition: good used/working shape Fits: Poulan built Craftsman model # 358.356240 chainsaw and some other models
poulan built craftsman 358.356240 chainsaw carb adapter base, sleeve, seal and cleaner kit
Part: carburetor adapter base with sleeve boot, seal, air cleaner duct Part # 530-036581, 530-029814, 530-019177, 530-029813 Condition: good used/working shape Fits: Poulan built Craftsman model # 358.356240 chainsaw and some other models
(2 in stock)
poulan built craftsman model # 358.356240 chainsaw top cover and hand guard set
Part: top cover cylinder shroud with hand guard Part # 530-036088 (substitution 530-069568) and 530-027181 (substitution 530-047382) Condition: good used/working order Fits: Poulan built Craftsman model # 358.356240 chainsaws. Poulan Pro 255. May also fit other models
(1 in stock)
sears craftsman built roper d-44 chainsaw muffler kit
Part: muffler Condition: good used/working order Fits: Craftsman built Roper D44 models with models # 917.351140 and some other models
(4 in stock)
craftsman built roper 3.7 chainsaw fuel cap (early model) pn 9122H
Part: fuel cap with O ring Part # 9122H Condition: good used/working shape Fits: Craftsman built Roper 3.7 chainsaws with model # 917.351090 and some other model #s
(1 in stock)
roper built craftsman 2.5 chainsaw bottom plate shroud
Part: bottom plate shroud Condition: good used/working shape-no breaks Fits: roper built craftsman 2.5 chainsaws
(1 in stock)
roper built craftsman 2.5 chainsaw starter housing cover only
Part: starter recoil cover Part # 9559 Condition: good used/working shape Fits: Roper built craftsman 2.5 chainsaws
(1 in stock)
craftsman 1.9, 12" chainsaw lever button and bolt
Part: lever button and bolt Condition: good used/working shape Fits: craftsman 1.9, 12"
craftsman 20", 46cc chainsaw oil pickup hose
Part: oil pickup line hose Condition: good used/working shape Fits: Poulan built craftsman 20", 46cc chainsaws with model #s 358.350202, 358.350203
(1 in stock)
poulan built craftsman 20" , 46cc chainsaw intake rubber seal
Part: rubber seal for the intake Condition: good used/working shape Fits: poulan built craftsman 20", 46cc chainsaws and some other models
(1 in stock)
poulan built craftsman 18", 40cc chainsaw brake tension spring
Part: brake spring Condition: good used/working shape Fits: Poulan built Craftsman 40cc, 18" chainsaws
(1 in stock)
poulan built craftsman 42cc, 18" model # 358.350670 chainsaw cylinder bolt set
Part: set of 4 cylinder head bolts Condition: good used/working shape Fits: Poulan built Craftsman 42cc, 18" chainsaws with model # 358.350670
(1 in stock)
poulan built craftsman 42cc, 18" model # 358.350670 chainsaw crankcase pan
Part: crank case pan/bottom. Part # 530-057941 Condition: good used/working shape Fits: Poulan built 42cc, 18" Craftsman chainsaws with model # 358.350670
(1 in stock)
poulan built craftsman 42cc, 18" model # 358. 350670 chainsaw fuel tank rear trigger handle
Part: fuel tank rear trigger handle with throttle trigger, safety and bar stud set Condition: good used/working shape Fits: Poulan built 42cc, 18" model # 358. 350670 Craftsman chainsaws
(3 in stock)
craftsman 1.9 chainsaw clutch side cover / bar clamp type 2 pn 11219
Part: clutch brake cover Condition: good used/working shape Fits: Craftsman 1.9
(1 in stock)
craftsman 42cc, 20" chainsaw hand guard bolt
Part: hand guard bolt set Condition: good used/working shape Fits: Craftsman 42cc, 20" chainsaw
(2 in stock)
craftsman 1.9 12" / 14"chainsaw clutch side cover / bar clamp type 1
Part: clutch brake cover Condition: good used/working shape Fits: Craftsman 1.9, 12" & 14"
(4 in stock)
roper built craftsman 3.7 chainsaw air filter cover nut type 1
Part: air filter cover nut knob Condition: good used/working shape Fits: old style Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
(3 in stock)
craftsman 18" 42cc chainsaw top cover
Part: top cover engine shroud Condition: good used/working shape. minor melting on underside Fits: Craftsman 18" 42cc chainsaws
(2 in stock)
roper built craftsman 3.7 chainsaw drivecase carrier with bearing
Part: drivecase carrier with keystone bearing Condition: good used/working shape. Has a small/minor chip on edge Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(1 in stock)
roper built craftsman 3.7 chainsaw crankcase and bar studs
Part: crank case with bar stud / bolt set Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(1 in stock)
craftsman 2.4 cid 40cc chainsaw starter recoil cover only
Part: starter housing cover only Condition: good used/working shape Fits: Craftsman 2.4cid, 40cc 18" chainsaws
(2 in stock)
roper built craftsman 3.7 chainsaw red starter recoil cover only
Part: starter housing cover only. PN 2921R Condition: good used/working shape Fits: Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
(1 in stock)
roper built craftsman 3.7 chainsaw pin
Part: pin Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(2 in stock)
craftsman 2.0 chainsaw starter recoil cover only
Part: starter cover only Condition: good used/working shape Fits: Craftsman 2.0
(1 in stock)
Sears Craftsman D-44 Chainsaw Trigger Handle Cover (Loc: Misc bin)
Part: Trigger handle cover Condition: Good used/working shape Fits: Sears Craftsman D44
Craftsman 18" 2.2 cid Chainsaw Chain Catcher/Stop
Part: Chain catcher/stop Condition: Good used/working shape Fits: Poulan built Craftsman 18" 2.2 cid Model # 358.351380
(1 in stock)
Craftsman 18" 2.2 cid Chainsaw Choke
Part: Choke Condition: Good used/working shape Fits: Poulan built Craftsman 18" 2.2 cid Model # 358.351380
Craftsman 18" 2.2 cid Chainsaw Flywheel and Starter Pawls
Part: Flywheel and starter pawls Condition: Good used/working shape Fits: Poulan built Craftsman 18" 2.2 cid Model # 358.351380
(1 in stock)
Craftsman 18" 2.2 cid Chainsaw Cylinder Bolt Set
Part: Cylinder bolt set of 4 Condition: Good used/working shape Fits: Poulan built Craftsman 18" 2.2 cid Model # 358.351380
(1 in stock)
Craftsman 18" 2.2 cid Chainsaw Top Cover Shroud
Part: Top cover shroud Condition: Good used/working shape Fits: Poulan built Craftsman 18" 2.2 cid Model # 358.351380
(1 in stock)
Poulan Built Craftsman 18" 2.2 cid Chainsaw Rear Trigger Handle w/ Trigger, Safety and Throttle Cable
Part: Rear trigger handle with trigger, saftey and throttle cable Condition: Good used/working shape Fits: Poulan built Craftsman 18" 2.2 cid Model # 358.351380
(1 in stock)
Sears Craftsman D-44 Chainsaw Air Filter Cover Nut (Loc: Misc bin)
Part: Air filter cover nut Condition: Good used/working shape Fits: Sears Craftsman D44
(2 in stock)
sears crasftsman D-44 chainsaw ignition off switch (Loc: Misc bin)
Part: ignition off switch Condition: good used/working shape Fits: Sears craftsman roper D44
(1 in stock)
Craftsman 1.9 Chainsaw Spring Shield
Part: Spring shield Condition: Good used/working shape Fits: Craftsman 1.9
(2 in stock)
shindaiwa 488 chainsaw carburetor base bracket
Part: carburetor base bracket support. Part # 22160-82110 Condition: good used/working shape Fits: shindaiwa 488
(1 in stock)
craftsman 1.9 chainsaw crankshaft
Part: crank shaft Condition: good used/working shape Fits: craftsman 1.9
(1 in stock)
craftsman 1.9 chainsaw crankshaft rod
Part: crank rod Condition: good used/working shape Fits: craftsman 1.9
(1 in stock)
craftsman 1.9 chainsaw muffler assembly
Part: muffler Condition: good used/working shape Fits: craftsman 1.9
(1 in stock)
craftsman 1.9 chainsaw right body case housing half
Part: right body case housing half Condition: good used/working shape Fits: craftman 1.9
(1 in stock)
craftsman 1.9 chainsaw left body case housing half
Part: left body case half Condition: good used/working shape Fits: craftsman 1.9
(3 in stock)
Craftsman 2.0 Chainsaw Rear Trigger Handle #1 black
Part: Rear trigger handle housing. Condition: Good used/working condition Fits: Craftsman 2.0, 10"/12"/14" with model #s 358.352050, 358.352010 and others
(1 in stock)
Craftsman 14" 2.2 CID Chainsaw Starter Cover
Part: Starter/recoil cover (no internal components) Condition: Good used/working shape Fits: Craftsman 14" 2.2
(1 in stock)
Craftsman 14" 2.2 CID Model 358.351142 Chainsaw Crankshaft and Connecting Rod
Part: Crankshaft and connecting rod Condition: Good used/ working condition Fits: Craftsman 14" 2.2 CID Model 358.351142
Craftsman 2.0 Chainsaw Reed Valve Plate
Part: Reed valve plate. Part # 23366 replaced by 530-023804 Condition: Good used/working condition Fits: Craftsman 2.0, 10"/12"/14" with model #s 358.352050, 358.352010 and others
(2 in stock)
Craftsman 2.0 Chainsaw Ignition Off Switch
Part: Ignition off switch knob, wire and hardware pictured Condition: Good used/working condition Fits: poulan built Craftsman 2.0, 10"/12"/14" with model #s 358.352050, 358.352010 and others. Is the Poulan Mircro XXV equivalent.
(1 in stock)
Craftsman 14" Chainsaw Throttle Safety Latch
Part: Throttle Safety Latch Condition: Good used/working condition Fits: Craftsman 14" (Poulan built) 2.2 cid Model 358.351142
(1 in stock)
Craftsman 14" Chainsaw Ignition Off / Toggle Switch & Wires
Part: Ignition Off/Toggle Switch w/ Wires Condition: Good used/working condition Fits: Craftsman 14" (Poulan built) 2.2 cid Model 358.351142
(1 in stock)
Craftsman 14" Chainsaw Air Filter Holder
Part: Air filter holder Condition: Good used/working condition Fits: Craftsman 14" (Poulan built) 2.2 cid Model 358.351142
(1 in stock)
Craftsman 14" Chainsaw Crankcase Pan/Cap
Part: Crankcase pan/cap Condition: Good used/working condition Fits: Craftsman 14" (Poulan built) 2.2 cid Model 358.351142
(1 in stock)
craftsman 20" chainsaw flywheel nut
Part: flywheel nut Condition: good used/working shape Fits: Craftsman (poulan built) 20" chainsaws with model #: 358.350203 and some other models
(1 in stock)
craftsman 20" chainsaw bar plate
Part: bar plate Condition: good used/working shape Fits: Craftsman (poulan built) 20" chainsaws with model #: 358.350203 and some other models
(2 in stock)
craftsman 20", 46cc chainsaw rear handle cover
Part: rear handle cover Condition: good used/working shape Fits: Craftsman (poulan built) 20" chainsaws with model #: 358.350203 and some other models
(1 in stock)
craftsman 20" chainsaw crankcase cap/pan
Part: crankcase cap Condition: good used/working shape Fits: Craftsman (poulan built) 20" chainsaws with model #: 358.350203 and some other models
(1 in stock)
craftsman 20" chainsaw crankcase/tank chassis
Part: crankcase chassis Condition: good used/working shape with no leaks Fits: Craftsman (poulan built) 20" chainsaws with model #: 358.350203 and some other models
(1 in stock)
craftsman 18" chainsaw air duct/seal
Part: air duct Condition: good used/working shape Fits: Craftsman (poulan built) 18" chainsaws with model #: 358.351190 and some other models
(1 in stock)
craftsman 18" chainsaw flywheel baffle cover
Part: flywheel cover Condition: good used/working shape Fits: Craftsman (poulan built) 18" chainsaws with model #: 358.351190 and some other models
(1 in stock)
craftsman 18" chainsaw intake adaptor/manifold and boot
Part: intake adaptor/manifold and boot Condition: good used/working shape Fits: Craftsman (poulan built) 18" chainsaws with model #: 358.351190 and some other models
(1 in stock)
craftsman 18" chainsaw flywheel nut
Part: flywheel nut Condition: good used/working shape Fits: Craftsman (poulan built) 18" chainsaws with model #: 358.351190 and some other models
(1 in stock)
Craftsman 20" 46cc chainsaw top front handle bar
Part: top front handle bar Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with model #: 358.350202 and some other models
(4 in stock)
Craftsman 20" 46cc Chainsaw ignition off switch
Part: Ignition off switch button - red or black in color Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with model #: 358.350202, 358.350203 and Poulan Pro 255 some other models
Craftsman 20" 46cc chainsaw oil pump oiler assembly
Part: oil pump assembly Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with model #: 358.350202. 358.350203 and some other models
(1 in stock)
Craftsman 20" 46cc chainsaw crankshaft, rod, bearings
Part: crankshaft, rod, bearings Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with model #: 358.350202 and some other models
(2 in stock)
craftsman 20" 46cc chainsaw flywheel baffle cover
Part: flywheel cover Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with model #: 358.350202 and some other models
(1 in stock)
craftsman 20" 46cc chainsaw air filter base/bottom
Part: air filter base Condition: good used/working shape Fits: Craftsman (poulan built) 20" 46 cc chainsaws with model #: 358.350202 and some other models
craftsman 3.7 chainsaw clutch side cover and chain tensioner model # 917.353770 (red, late model with chain tensioner)
Part: clutch cover with tensioner Condition: good used/working shape-has some paint loss and wear on bottom edge of cover Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(1 in stock)
craftsman 3.7 chainsaw drivecase keystone bearing
Part: drivecase keystone bearing Condition: good used/working shape with no breaks Fits: Roper built Sears Craftsman chainsaws- model number: 917.353770 and 917.353771
craftsman 3.7 chainsaw oil tank
Part: oil tank Condition: good used/working shape with no breaks or leaks Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(3 in stock)
craftsman 3.7 chainsaw throttle latch
Part: throttle latch Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw rubber av buffer mount #2
Part: buffer mount Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(4 in stock)
roper built craftsman 3.7 chainsaw air filter mount
Part: filter mount cover Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
roper built craftsman 3.7 chainsaw baffle shield plate
Part: flywheel shroud, baffle plate cover Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(1 in stock)
Craftsman 2.1 PS, 2.1PS Starter/Recoil Cover Housing
Part: starter cover only Condition: good used/working shape-has some paint loss/scuffing Fits: Craftsman 2.1 PS
(1 in stock)
Craftsman 3.3 Chainsaw Throttle Trigger Handle Cover
trigger handle covergood used shape with no breaks-some scuffingFits the Following Models: Craftsman 3.3
(1 in stock)
Craftsman 3.3 Chainsaw Ignition Off Switch w/ Wire
ignition off switch with wirein nice working shapeFits the Following Models: Craftsman 3.3
(2 in stock)
poulan built Craftsman 3.3 Chainsaw Choke Link and Grommet
choke link and grommet good used shape with no breaks Fits the Following Models: Craftsman 3.3