Mall 2MG Chainsaw Muffler Assembly
Complete muffler assembly with base and exhaust cover, gasket and hardware In good used shape Fits Mall 2-MG, 2MG
mall 2mg chainsaw flywheel kit
Part: flywheel rotor with cup, screen Part # 41327 + 42484 Condition: good used/working shape Fits: Mall 2 G
Mall 2MG Chainsaw coil
coil Was tested for spark, and did have spark. Coil coating is cracked - see photos for details. Fits Mall 2MG 2-MG 2 MG
Mall 2MG carburetor ME3B
Tillitson ME3B carburetor good used physical condition-may need a carb rebuild kit Fits Mall 2MG 2-MG 2 MG
Mall 2MG Chainsaw flywheel magneto
Flywheel magneto ignition rotor for Mall 2 MG 2-MG chainsaw good used shape
Mall 2MG Chainsaw case tank half 40887A
case tank half 40887A 40887 A In good used shape. Please see pictures for details Fits Mall 2MG
Mall 2MG Chainsaw case tank half
case tank half In good used shape. Has a couple of chips/ blemishes. Please see pictures for details Fits Mall 2MG
Mall 2MG Chainsaw Starter Assembly
Complete starter recoil, rewind cover assembly. Includes cover, pulley, pawls, springs, mechanism and all. In good used shape Fits Mall 2-MG, 2MG
Mall 12A Chainsaw Top Handle
Top wrap around handle for chainsaw transmission case. In good used shape Fits Mall 2MG 12A and other chainsaw gear case attachment.
Mall 12A Chainsaw Clutch Cover
Clutch bar and chain cover. 35687 In good used shape Fits Mall 2MG 12A and other chainsaw gear case attachment.
mall 2mg chainsaw rear trigger handle half
Part: rear handle half- right side Part # 40889 Condition: good used/working shape Fits: Mall 2 MG
mall 2mg chainsaw rod and channel lever
Part: channel lever and rod Condition: good used/working shape Fits: Mall 2 MG
Mall 2MG Chainsaw oil line with fittings
oil line with fittings In good used shape Fits Mall 2MG
(1 in stock)
Mall 2MG Chainsaw lot of assorted hardware
assorted hardware - includes all in picture In good used shape Fits Mall 2MG
(1 in stock)
Mall 2MG Chainsaw case bolts
case bolts In good used shape Fits Mall 2MG
Mall 2MG Chainsaw switch
switch In good used shape Fits Mall 2MG
(1 in stock)
Mall 2MG Chainsaw intake and boot
intake mount and boot part numbers 40899, 40898 In good used shape Fits Mall 2MG
Mall 2MG Chainsaw Spark Plug Boot
Spark plug boot 23588 In good used shape Fits Mall 2MG
Mall 2MG Cylinder 40754 and piston
Piston, cylinder, connecting rod, crankshaft and bearing for Mall 2 MG 2-MG chainsaw . Part number 40754. Good used shape. See pictures for more detailed condition.
(1 in stock)
Mall 2MG Chainsaw crankcase bearing plate 42710and hardware
Crankcase bearing plate for Mall 2 MG 2-MG chainsaw with hardware. Part number 42710. good used shape
(1 in stock)
Mall 2MG Chainsaw cover gasket
cover gasket fits Mall 2 MG 2-MG Used
(1 in stock)
Mall 2MG Chainsaw transmission gear case 40910
Mall 2-MG transmission gear case Appears to be in working condition Fits Mall 2 MG
Mall 2MG Chainsaw ID Tag
Model identification plate - Mall 2 MG 2-MG Used
Mall 2MG Chainsaw Air filter
Air filter In good used shape Fits Mall 2MG
Mall 2MG Chainsaw Reed Assembly
Reed assembly with hardware In good used shape Fits Mall 2MG 2-MG 2 MG
(1 in stock)
Mall 2MG Chainsaw chain tensioner adjuster
chain tensioner adjuster In good used shape Fits Mall 2MG 2-MG 2 MG
(1 in stock)
Mall 2MG Chainsaw Clutch kit
Clutch and bearing In good used shape Fits Mall 2MG 2-MG 2 MG
(1 in stock)
Mall 2MG Chainsaw spike
Spike dog In good used shape Fits Mall 2-MG 2 MG
(1 in stock)
Mall 2MG Chainsaw Oil Cap
Oil cap In good used shape Fits Mall 2-MG 2 MG
(1 in stock)
Mall 2MG Chainsaw Fuel Cap
Fuel Gas cap In good used shape Fits Mall 2-MG 2 MG
(1 in stock)
Mall 2MG chainsaw clamp
Clamp for Mall 2 MG saw. Good used shape
(1 in stock)
mall 2mg chainsaw flywheel shroud
Part: flywheel cover shroud Condition: good used/working shape Fits: Mall 2 MG
mall 2mg chainsaw rear trigger handle half
Part: rear handle half- right side Part # 40889 Condition: good used/working shape Fits: Mall 2 MG
(1 in stock)
Mall 18" Chainsaw Bar 43332 NEW
18" Mall Tool Company Bar 43332 J14. Use 49 Inch chain. New old stock part with packaging Fits many old models of Mall and Remington chainsaws.