Solid state ignitioin group. Roper part number 9326R Tested, in good used shape Fits Craftsman Roper 3.7. 917....model numbers
Clutch assembly includes: drum, bearing, 3/8" pitch rim sprocket, mechanism with 4 shoes, 2 clutch springs and carrier plates. In good used shape Fits Roper built Craftsman D-44 Direct Drive
Tecumseh carb 610399 In good used shape, may or may not need fresh carb kit installed Fits many older Tecumseh power products engine Sears, Craftsman, Roper chainsaws.
Part: rear trigger handle half Condition: good used/working shape Fits: Roper built Craftsman 3.7 chainsaws which model #s begin with the prefix 917 May vary in color .
Part: handle bar Condition: good used/working shape-not cracked or bent Fits: Roper built Sears Craftsman 3.7 chainsaws with model number: 917.353760.
Part: Fuel tank assembly with bar studs Condition: good used shape. some skuffs/paint loss Fits: Roper built Craftman 3.7 model 917.353760
Manual oil pump plunger button. In good used shape Fits Craftsman Roper D44 and others
Part: set of 4 bolts/ screws for handle Condition: good used/working order Fits: Roper built Craftsman 3.7 model 917.353760
Part: set of 4 bolts/ screws Condition: good used/working order Fits: Roper built Craftsman 3.7 model 917.353760
Part: hand guard Condition: good used shape Fits: Roper built Craftman 3.7 model 917.353760
Part: flywheel access cover / case bracket Condition: good used shape Fits: Roper built Craftman 3.7 model 917.353760
Part: rear handle oil tank assembly Condition: good used shape. some skuffs/paint loss Fits: Roper built Craftman 3.7 model 917.353760
Part: top handle bracket and hardware Condition: good used shape Fits: Roper built Craftman 3.7 model 917.353760
Oil lines In good used shape Fits older model craftsman built roper 3.7 917.353760
Flywheel and starter cup. 590382, 610709 In good used shape Fits Craftsman Sears Roper 917. series D-44 and others
Oil line In good used shape Fits older model craftsman built roper 3.7
Shortblock motor assembly. Piston, cylinder, crankshaft with rod. In good used shape Fits older craftsman roper 3.7 chainsaws. This cylinder is tapped with a port for the compression release on the top side.
Starter rewind recoil spring. 8202R NEW aftermarket part Fits Craftsman Sears Roper 2.5
Part: rear handle grip insert Condition: good used/working shape Fits: Roper Built Craftsman 2.5 models
Part: white starter housing cover only. PN 2921R Condition: good used/working shape Fits: old style Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models