David Bradley 360 Chainsaw flywheel
Phelon Flywheel In good used shape Fits David Bradley 360 and others
David Bradley 360 Chainsaw Starter Assembly
Starter rewind recoil pull start assembly complete Good used / usable Depending on model direction of pull may need to be reversed by flipping starter spring over. Fits David Bradley 360 and others
David Bradley 360 Chainsaw Phelon Ignition
Complete phelon ignition kit. Includes: stator, coil, points, condenser and all. Tested, in good working order Fits David Bradley 360 and others
David Bradley 360 Chainsaw Starter Cup
Deeper style starter cup for Fairbanks Morse Starter In good used shape (bear in mind that these cups were smooth on the inside when new, and are still smooth on the inside when in good used condition) Fits David Bradley 360 and others
David Bradley 360 Chainsaw Muffler
Muffler exhaust casting In good used shape Fits David Bradley 360, 917.series
David Bradley 360 Chainsaw Spark Plug Guard
Spark plug guard cover part number 9774m In good used shape Fits David Bradley 360
David Bradley 917. chainsaw herr 3/8"-7t spur sprocket drum new pn n117-a7
Part: 3/8" pitch x 7T spur sprocket drum for the clutch Herr Part # n117 a7 Condition: new Fits: David Bradley 917... LIGHTWEIGHTS WITH 2-3/4" CLUTCH
(1 in stock)
David Bradley Chainsaw Cylinder Cover
cylinder cover In good used shape Fits some models of David Bradley chainsaws.
David Bradley 360 Chainsaw Piston & Cylinder Assembly
Short block motor includes: piston with rings and pin, cylinder. In good used shape Fits David Bradley 360, 917.60002. Tecumseh Power Products AH47 type 1079B engine.
David Bradley 360 Chainsaw Tillotson Carburetor
Tillotson HL carb. HL11a, HL 11a In good used shape, may or may not need fresh gasket and diaphraghm kit installed Fits David Bradley 360 and others
David Bradley 360 Chainsaw Air Filter Cover
Air filter cover cap with lock In good used shape Fits David Bradley 360 and others
Strunk Chainsaw Gas / Fuel cap
Part: fuel filler cap Condition: good used/working shape Fits: Many Strunk Models: speed demon, speedemon, machete, big timber, p-3, pd-3, busy beaver, David Bradley chainsaws with model # 355.50130
Sears David Bradley 917.350720 Chainsaw Reed Valve
Reed valve with plate. 470131 In good used shape Fits Sears David Bradley 917.350720
Strunk Chainsaw Air Filter Assembly
Part: Air filter with base and hardware. Condition: good used/working shape Fits: Many Strunk Models: speed demon, speedemon, machete, big timber, p-3, pd-3, busy beaver, David Bradley chainsaws with model # 355.50130
David Bradley 360 Chainsaw Carburetor Mounting Elbow
Intake carb manifold mounting elbow. In good used shape Fits David Bradley 360, 917.60003 Chainsaws and others
David Bradley 360 Chainsaw Reed Assembly
4 petal reed intake assembly with housing. In good used shape Fits David Bradley 360, 917.60003 Chainsaws and others
David Bradely 360 Chainsaw Throttle Trigger
Throttle trigger. 9769M1 In good used shape Fits David Bradley 360 and others
David Bradley 360 Chainsaw Starter Mounting Flange
Starter recoil rewind assembly mounting flange. 590237 In good used shape For Fairbanks Morse Starters used on 917. series David Bradley 360 and others
David Bradley Gear Drive Chainsaw Clutch Assembly
Clutch assembly with: 4 shoe ceramic clutch mechanism with spring and carrier, pinion gear, washers, and lock nut. In good used shape Fits MANY gear driven David Bradley and Sears Craftsman 917... Chainsaws
David Bradley 917.61402 Chainsaw Reed Valve
Reed valve with plate. 470114, 470117 In good used shape Fits Sears David Bradley 917.61402
David Bradley Model 917.60003 Chainsaw Air filter kit
Air Filter base pn 9842m , Air Filter pn 9870m, and Air filter Cover Good Used/ Usable Sears David Bradley Model 917.60003
David Bradley 360 Chainsaw HL Tillotson Carburetor Needle and Seat
Tillotson HL carb parts In good used shape Fits David Bradley 360 917.61402 and others
David Bradley 360 Chainsaw HL92a Tillotson Carburetor
Tillotson HL carb. HL 92a, HL 92 a In good used shape, may or may not need fresh gasket and diaphraghm kit installed Fits David Bradley 360 917.61402 and others
David Bradley model # 917.60006 Chainsaw Flywheel Shroud
Part: Flywheel shroud backing plate Condition: Good used/working shape Fits: David Bradley, model # 917.60006
David Bradley 360 Chainsaw Flywheel Shroud Cover
Part: Flywheel shroud cover starter base Condition: Good used/working shape Fits: David Bradley 360
(2 in stock)
David Bradley 360 Chainsaw Flywheel Shroud
Part: Flywheel shroud case backing plate Condition: Good used/working shape Fits: David Bradley 360
David Bradley 360 Chainsaw Air Filter
Skinner ribbon type air filter element Intact used condition Fits David Bradley 360 and others
David Bradley 917.61402 Chainsaw Air Intake Reed Holder
Carb mount air intake elbow In good used shape Fits Sears David Bradley 917.61402
David Bradley 917.61402 Chainsaw Choke Pull
Choke lever In good used shape Fits Sears David Bradley 917.61402
David Bradley 360 Chainsaw complete clutch assembly
Complete clutch mechanism with 6 tooth sprocket In good used shape Fits David Bradley 360 and others
David Bradley Chainsaw Model ID and Instruction Tag
Model and instructions tag with screws In good used shape Fits many, large, old David Bradley Chainsaws.
sears david bradley herr 3/8-7 spur sprocket drum and bearing new pn n116-a7
Part: 3/8" pitch x 7T spur sprocket drum for the clutch Herr Part # n116 a7 Condition: new Fits: some models of Sears David Bradley 917-350710, 917-350711, 917-351050, lightweight 917
david bradley model # 355.50130 chainsaw throttle trigger and link
Part: throttle trigger and link Condition: good used/working shape Fits: David Bradley chainsaws with model # 355.50130
David Bradley model # 355.50130 Chainsaw Drive Gear and Bearings
Part: Drive gear and bearings Condition: Good used/working shape Fits: David Bradley model # 355.50130
David Bradley model # 355.50130 Chainsaw Sprocket
Part: clutch Sprocket Condition: Good used/working shape Fits: David Bradley with model # 355.50130
David Bradley model # 355.50130 Chainsaw Flywheel Magneto/Hub
Part: Flywheel Magneto/Hub Condition: Good used/working shape Fits: David Bradley with model # 355.50130
David Bradley model # 355.50130 Chainsaw Points Cam
Part: Points cam Condition: Good used/working shape Fits: David Bradley, model # 355.50130
David Bradley 360 Chainsaw Bar Mount Pad and Tensioner
Bar mount pad with tensioner and nuts In good used shape. Some chain damage, see photos. Fits David Bradley 360
David Bradley 360 Chainsaw Bucking Spike
Part: Bucking Spike Condition: Good used/working shape. Fits: David Bradley model 360
(1 in stock)
David Bradley model # 917.60006 governor kit
Part: governor Condition: Good used/working shape Fits: David Bradley, model # 917.60006
(1 in stock)
David Bradley model # 917.60006 Chainsaw Flywheel Shroud Cover
Part: Flywheel shroud starter cover Condition: Good used/working shape Fits: David Bradley, model # 917.60006
(2 in stock)
David Bradely 360 Chainsaw Rear Handle Tank Housing
Rear trigger handle fuel and bar oil tank. In good used shape Fits David Bradley 360 and others
David Bradley 360 chainsaw Drivecase
Drivecase with bar studs and oil line In good used shape Fits David Bradley 360 917.series and others
(1 in stock)
david bradley .325-7 windsor clutch spur sprocket drum
Part: windsor .325x7 clutch spur sprocket drum Part # DB 137 A7 Condition: good used/working order- shows no wear on the teeth Fits: some models of David Bradley chainsaw
(1 in stock)
David Bradley model # 355.50130 Chainsaw Bucking Spike
Part: Bucking Spike Condition: Good used/working shape. Has small chip Fits: David Bradley model # 355.50130
(1 in stock)
David Bradley model # 355.50130 Chainsaw Oil Cap
Part: Oil Cap Condition: Good used/working shape Fits: David Bradley model # 355.50130 chainsaws
david bradley model # 355.50130 chainsaw top handle bar
Part: top handle bar Condition: good used/working shape Fits: David Bradley chainsaws with model # 355.50130
David Bradley model # 355.50130 Chainsaw Bar Studs
Part: Bar Stud / bolt set Condition: Good used/working shape Fits: David Bradley model # 355.50130
(1 in stock)
david bradley model # 355.50130 chainsaw fuel/gas tank
Part: fuel tank Condition: good used/working shape with no leaks Fits: David Bradley chainsaws with model # 355.50130
(1 in stock)
david bradley model # 355.50130 chainsaw crankcase with crankshaft
Part: crank case and crank shaft Condition: good used/working shape Fits: David Bradley chainsaws with model # 355.50130
David Bradley 355.50130 Chainsaw Clutch/Drive Pinion
Part: Clutch/drive pinion Condition: Good used/working shape Fits: David Bradley 355.50130
david bradley model # 355.50130 chainsaw points ignition coil
Part: points ignition coil Condition: good used shape-tested and works Fits: David Bradley chainsaws with model # 355.50130
(1 in stock)
David Bradley model # 355.50130 Chainsaw Bar Clamp
Part: Bar clamp and nuts Condition: Good used/working shape Fits: David Bradley model # 355.50130
(1 in stock)
David Bradley model # 355.50130 Chainsaw Bearing Retainer
Part: Bearing retainer Condition: Good used/working shape Fits: David Bradley, model # 355.50130
(1 in stock)
David Bradley model # 355.50130 Chainsaw Air Horn Intake
Part: Air horn intake Condition: Good used/working shape Fits: David Bradley, model # 355.50130
David Bradley model # 355.50130 Chainsaw Ignition Off Switch
Part: Off switch Condition: Good used/working shape Fits: David Bradley, model # 355.50130
(1 in stock)
David Bradley model # 355.50130 Chainsaw Flywheel Shroud
Part: Flywheel shroud cover Condition: Good used/working shape Fits: David Bradley, model # 355.50130
(1 in stock)
David Bradley 355.50130 Chainsaw Drive Gear Case Cover
Part: Drive gear case/cover Condition: Good used/working shape Fits: David Bradley 355.50130