Jonsered 70e, 920 chainsaw starter spring
Starter rewind recoil spring. Jonsereds part number 504 21 26-01, 504 212601 New aftermarket part Fits many models of Jonsered. 621, 66E, 70, 70E, 80, 90, 910, 920, 930, 820, 830
Jonsered Chainsaw Crankshaft Oil Seal 504 14 62-00 NEW (Loc: Box X)
Jonsereds Crank Seal: 504 14 62-00, 504146200, 504 146200, 504 12 62 00 New reproduction part. This crankseal fits models: 49sp, 50, 51, 52, 52E, 52 E, 521 E, 521EV, 601, 621, 66e, 70, 70e, 751, 80, 801, 90, 910, 920, 930, 810, 820, 830
Jonsered 621 - 930 Chainsaw Rubber Rear AV Mount MALE 504 12 50-14 NEW 55-50-104
Rubber anti-vibration cushion rear trigger handle mount 504 12 50-14, 504-125014, 504125014. Male thread on one end and female on the other. High quality NEW replacement part Fits Jonsered Jonsereds 621 920 930 820 830 and others.
jonsered 49sp to 52e series, 70e, 621, 80, 90 chainsaw oil cap (Jn 90 bin)
Part: oil cap. Part # 504 11 09-00 Condition: good used/working shape Fits: Jonsereds 49 sp, 50, 51, 52, 52e, 70 e, 621, 80, 90
Jonsered 490 Chainsaw 44mm Windowed Piston Kit 503 10 02-01 NEW
44mm Bore Piston kit includes: piston, ring, wrist pin, and keepers. 503 10 02-01 New AFTERMARKET part Fits Partner 5000, 5000H, 5000 Plus, 5000+, Jonsereds Jonsered 490
Jonsered 920 Chainsaw Lower Rear Handle Mount 504 12 50-33 NEW 55-50-101
Rubber lower rear trigger handle AV buffer mount. 504 12 50-33 NEW Fits Jonsered Jonsereds 820 830 920 930
jonsered 49sp, 50, 51, 52, 52e, 521ev chainsaw herr starter rewind spring new replaces pn 504 21 26-02
Part: starter recoil spring Part # 504 21 26 02 Condition: NEW, aftermarket part. Fits: Jonsereds chainsaws 49 sp, 50, 51, 52, 52e, 521 ev and trimmers rs52e
jonsered 49sp, 52, 52e, 70e, 621, 521ev chainsaw ignition off switch (621 bin)
Part: ignition off switch Part # 504 38 56-02 Condition: good used/working shape Fits: Jonsereds 49 sp, 52, 52e, 521ev, 621, 70 e, 80, 90
Jonsered 670 Chainsaw Intake Boot 503 61 13-01 NEW 85-33-206
Intake manifold boot, induction pipe, rubber intake gasket. 503 61 13-01, 503536601, 503 53 66-01, 503611301 NEW Fits Jonsered 625, 670, Super Champ II etc. (models where the impulse line is separate from boot and not integrated into it, this is most models).
Jonsered 625, 630, 670 Chainsaw choke rod NEW 504 84 31-19 (J-03)
Choke rod. 504843119 New part from old dealer stock Fits Jonsereds models: 625, 630, 670
Jonsered 920 Chainsaw Lower Top Handle Mount 504 12 50-34 NEW 55-50-102
Rubber lower top handle AV buffer mount. 504 12 50-34 NEW Fits Jonsered Jonsereds 820 830 920 930
Jonsered 920 Chainsaw Cylinder Side AV Handle Mount 504 12 50-32 NEW 55-50-100
Rubber top and rear handle AV buffer mount. Goes on right side, next to the cylinder head. 504 12 50-32 NEW Fits Jonsered Jonsereds 820 830 920 930
Jonsered 49SP to 52e series, 450 to 535 series chainsaw Inner & Outer Bar Plate Set (loc: 450 bin)
Part Name: set of inner and outer bar plates. Part #s 504 59 03-02 & 504 03 02-01 Condition: some wear, good used/working shape Fits the Following Models: jonsered 49 sp 50, 51 52, 52e, 450, 455, 510, 520, 525, 530, 535 Location: 49sp+ bin and 450+ bin
jonsered 630, 670 chainsaw top wrap handle bar
Part: top front handlebar. PN 503 61 71-01 Condition: good used/working shape Fits the Following Models: Jonsereds 630, 670, 625
Jonsered 625, 630, 670 Throttle Link
Part: Throttle link rod. PN 503 45 53-01 Condition: Good used/working shape. May vary cosmetically. Fits: Jonsered 625, 630, 670
(4 in stock)
Jonsered 2050 chainsaw piston assembly 44mm 503 62 56-01 NEW
Piston w/ ring, wrist pin, and clips Jonsered part number 503 62 56-01 New aftermarket part Fits Jonsered 2050 Turbo, Husqvarna 49
husqvarna 266, 61, 268, 272 and jonsered 625, 630, 670 chainsaw small, coarse thread av buffer mount type 1 (Loc: Jon 670 bin)
Part: small av buffer mount / antivibe element for the tank Condition: good used/working shape Fits: 266, most 61 models, 268, most 272 models. Fits 61 and 272 models which have plastic (not metal) tanks and have coarse threaded mounts. Fits all models of Jonsered 625, 630, 670
jonsered 70e, 621, 80, 910 + chainsaw bar plate set (70e bin)
Part: set of inner and outer bar plates. Part #s 504 59 26-00, 504 59 27-00 Condition: good used/working shape Fits: Jonsereds 70 e, 66e, 621, 80, 90, 820, 910e, 910ev, 920, 930 Location: 70e bin
Jonsered 49SP to 521e series chainsaw tillotson carburetor
tillotson HS carburetor. PN 504 80 06-00, HS21D C Carb in good physical condition, may need a carb rebuild kit. Fits 49SP 50, 51, 52 52E and 521 jonsered models
(2 in stock)
jonsered 49sp to 521 series chainsaw air filter
Part: air filter. Part # 504 35 71-01 Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 52e, 521
Jonsered 535 Chainsaw Piston Assembly 503 16 38-01 NEW
45mm diameter piston kit includes: piston, ring, wrist pin, and keeper clips. 503 16 38-01, 503163801 New AFTERMARKET part Fits Jonsered Jonsereds 535, 525
Jonsered 621 - 930 Chainsaw Rubber Rear AV Mount FEMALE 504 12 50-14 NEW 55-50-103
Rubber anti-vibration cushion rear trigger handle mount 504 12 50-14, 504-125014, 504125014. Female threads in both ends. High quality NEW replacement part Fits Jonsered Jonsereds 621 920 930 820 830 and others.
Husqvarna 371, 372, 362, 365 and Jonsered 2071, 2171, 2065, 2165, 2063 turbo chainsaw intake manifold boot with brace and clamp (2071 bin)
Part: intake manifold boot with support brace and clamp Part # 503 96 45-01, 503 56 00-04, 503 71 27-01 Condition: good used/working order Fits: Husqvarna 371, 372, 362, 365 and Jonsered 2071, 2171, 2065, 2165, 2063 turbo
jonsered 490, 590 & Partner 500, 5000 chainsaw starter rewind spring pn 505 29 51-26 new (box E)
Part: starter rewind spring Part # 505 29 51 26 Condition: NEW, aftermarket part Fits: Partner 500 & 5000 & Jonsered 490, 590 Location: Box E
Jonsered 49SP t0 52e series Complete Starter / Recoil Cover and pulley assembly
Part: starter cover with pulley and spring 504 60 01-06, 504 600106 Condition: good used/working shape Fits: Jonsereds 49sp, 50, 51, 52, 52e
Jonsered 920 54mm Chainsaw Piston Kit 503 08 15-01 NEW
Piston kit with rings, wrist pin, and keepers. Jonsereds part number 503 08 15-01 NEW Aftermarket part Fits Jonsered 920 and 930 Series chainsaw with 54mm bore.
(3 in stock)
jonsered 510sp, 520sp, 450, 455, 525 chainsaw starter rewind spring new replaces pn 504 21 26-06 (bin 516)
Part: starter recoil spring Part # 504 21 26 06 Condition: NEW, aftermarket part. Fits: Jonsereds chainsaws 510 sp, 520 sp, 450, 455, 525, 535
Jonsered 49sp 44mm Chainsaw Piston Kit 504 41 00-06 NEW
44mm diameter piston kit includes: piston, ring, wrist pin, and keeper clips. 504 41 00-06, 504410006. Curiously, most Jonsereds parts diagrams do not include a part number for the piston assembly itself, but it is a component part of 504 42 00-10, 504420010. New, high quality AFTERMARKET part ...
Jonsered 520SP Chainsaw Piston Assembly 504 41 00-09 NEW
44mm diameter piston kit includes: piston, ring, wrist pin, and keeper clips. 504 41 00-09, 504410009, 504 410009 New AFTERMARKET part Fits Jonsered Jonsereds 525 520sp 510sp 510 520 sp
jonsered 625, 630, 670 chainsaw oil cap
Part: oil tank filler cap Condition: good used/working shape Fits: Jonsered 625, 630, 670
Jonsered 920, 80, 910 etc. Clutch Sprocket Drum 3/8-7 NEW
Replaceable rim sprocket clutch drum, 3/8" pitch 7 tooth. Jonsered part numbers: 503 17 16-01, 501 59 80-02, 501 59 80-01, 504 52 28-04, 504-52-30-08. Oregon 28563x NEW Windsor Sprocket . Fits Jonsereds 75, 751, 80, 801, 820, 830, 90, 910, 920, 930
(4 in stock)
jonsered 70e, 621 chainsaw clutch cover
Part: clutch side cover. Red or red and silver in color. Fits: Jonsered 70 E, 621, 66e, 80, 90, 801 In good used shape Jonsereds part number 504 59 00-06. 504 590006, 504 59 00 06
jonsered 2163, 2171 turbo chainsaw top wrap handle bar
Part: handlebar, part # 503 80 30-01 Condition: good used/working shape, some scuffing Fits: Jonsered 2163, 2171, 2172, 2165, 2065, 2071, 2063, 2163 turbo
jonsered 2159, 2156 turbo and Husqvarna 345, 350, 357xp, 359 chainsaw tensioner assembly (2159 bin)
Part: chain tensioner adjuster assembly. Part # 537 07 12-01 Condition: good used/working shape Fits: jonsered cs2159 and cs2156 turbo 2150, 2145 Turbo and Husqvarna 345, 350, 357 xp, 359 Husky 346 XP, 353, 346xp
jonsered 510 520 sp chainsaw choke link
Part: choke link rod and grommet Part # 504 84 31-14 Condition: good used/working shape Fits: Jonsered 510sp, 520sp, 450, 455, 525, 535
jonsered 2171, 2071 turbo and husqvarna 385xp, 371, 372 chainsaw brake cover pn 503 75 11-03 (2171 bin)
Part: dust cover, part # 503 75 11 03 Condition: good used/working shape Fits: Jonsered 2171, 2071 Turbo and Husqvarna 385 xp, 371, 372, 372xp, 371xp, 365, 362 special
jonsered 625, 630, 670 and husqvarna 61, 268, 266, 272 chainsaw inner bucking spike pn 503 59 08-01 (625 bin)
Part: bucking spike dawg Part # 503 59 08 01 Condition: good used/working order Fits: Husqvarna 268, 266, 61, 272xp and Jonsered 625, 630, 670
jonsered 630, and Husqvarna 61, 162, 266 chainsaw clutch sprocket assembly type 2 (coarse thread) Jon. 630 bin
Part: clutch assy-includes the rim sprocket drum, coarse thread mechanism, with new 3/8-7 rim sprocket. 501 40 32-02, 501 83 15-01 Condition: good used/working shape, with new/good used rim Fits: Jonsered 630 and Husqvarna 61, 162, 266
jonsered 2071 2171 and Husqvarna 371, 372 turbo chainsaw flywheel cover (JN 2071 bin)
Part: flywheel air conductor cover shroud, part # 503 62 83-01 Condition: good used/working shape. Has a few small/minor chips Fits: Jonsered 2063, 2065, 2163, 2165, 2071, 2171 Turbo. Husqvarna 371, 372, 371xp, 372xp, 365 362 special
jonsered 49sp to 52e series and 70e chainsaw av buffer mount assembly for the lower, top handle bar pn 504 12 50-01, 504 12 50-01 (49sp bin)
Part: av buffer mount for the handlebar Part # 504 10 13-00, 504 12 50-01, 504 06 53-05 Condition: good used/working shape may or may not include washer Fits: Jonsered 70 E, 49 sp, 50, 51, 52, 52e, 621
jonsered 625, 630, 670 chainsaw complete chainbrake assembly (late model)
Part: chainbrake, includes the clutch cover, hand guard, brake band, spring, mechanism Condition: good used/working order, some chipping on edges Fits: late model (newer) Jonsereds 625, 630, 670 models
(2 in stock)
jonsered 621, 920, 930 chainsaw rear handle av buffer mount pn 504 12 50-14 (621 bin)
Part: av buffer mount isolator for the rear handle Part # 504 12 50-14 Condition: good used/working order Fits: Jonsered 621, 920, 930
Jonsered 520 510 SP Chainsaw Tillotson Carburetor
Part Name: tillotson HK 23 HK23 series carburetor 504 80 04-16 Condition: good used physical condition, may or may not need a carb rebuild kit Fits the Following Models: Jonsered 510sp, 520sp
jonsered 49sp, 52, 52e, 521ev chainsaw av buffer, cup and washer kit (for crank case pn 504 12 50-01 & 504 06 53-04)
Part: av rubber buffer mount with cup, washer and bolts Part # 504 12 50-10, 504 06 53-04504 06 58-00 Condition: good used/woking shape Fits: Jonsereds 49 sp, 52, 52e, 521 ev, 451, 80, 90 location 90 bin
jonsered 450, 455, 525, 535, 520 chainsaw ignition off switch
Part: off switch. May not have stop plate Part # 504 38 56-03 Condition: good used/working shape Fits: Jonsereds 455, 450, 525, 535, 520, 520sp
jonsered 70e, 66e chainsaw air filter
Part: air filter. Part # 504 35 71-07 Condition: good used/working shape Fits: Jonsered 70, 66 E
(3 in stock)
jonsered 49sp, 50, 51, 52, 70e, 66e, 910 chainsaw av buffer mount (upper, rear handle pn 504 12 50-02)
Part: av buffer mount. 504 12 50-02 Condition: good used/working shape Fits: Jonsered 49sp 50, 51, 52, 52e, 70e, 66e 910 e ev
jonsered 49sp, 50, 51, 52, 52e , 521 chainsaw bar/chain tensioner adjuster
Part: chain tensioner screw , pin and nut. PN 504 02 00-06 and 504 59 05-03 and 732 21 14-01 Condition: good used/working shape Fits: Jonsereds 49 sp, 50 51, 52 ,52 e, 521
Jonsered 70e, 621, 80 Chainsaw Gas / Fuel Cap
Part: fuel cap Condition: good used/working shape Fits: Jonsereds 70 E, 621, 80, 49sp 52e 50 51 52 e ev
jonsered 49sp chainsaw ignition coil
Part: ignition coil Part # 504 39 17-01 Condition: good used/working shape. Tested and works with strong spark. Fits: Jonsereds 49 sp
jonsered 535, 520sp, 525 chainsaw air filter pn 504 35 71-21
Part: air filter Part # 504 35 71 21 Condition: good used/working shape Fits: Jonsered 535, 520 sp, 525 and some models of 450
jonsered 49sp to 52e series chainsaw spark plug cover
Part: spark plug cover. Part # 504 12 56-01 Condition: good used/working shape Location: Jonsereds 49 sp, 50, 51, 52, 52e
jonsered 510sp, 520sp, 450, 455, 535 chainsaw av buffer mount for the lower top handle pn 504 12 50-17
PART: av buffer mount for the lower top handle PART # 504 12 50-17 CONDITION: good used/working order FITS: Jonsereds 520 sp, 510 sp, 455, 450, 535
jonsered 450, 455, 535, 510sp, 520sp chainsaw chain tensioner adjuster
Part: chain tensioning screw and adjusting pin part # 504 59 05-03, 504 01 00-21, 732 21 14-01 Condition: good used/working shape Fits: Jonsered 455, 450, 535, 510 and 520 sp
husqvarna 266, 61, 268, 272 and Jonsered 625, 630, 670 chainsaw large, coarse thread av buffer mount type 2 (Loc: Jon 670 bin)
Part: large, front av buffer mount / antivibe element for the tank Condition: good used/working shape Fits: Husqvarna 266, most 61 models, 268, most 272 models. Fits 61 and 272 models which have plastic tanks (not metal) and which have coarse threaded mounts. Fits all Jonsered 625, 630, 670 models
Husqvarna 372xp chainsaw muffler only
Part: muffler 503 76 54-02, 544 02 97-02 Condition: good used/working shape, uglyish but usable Fits: Husqvarna 365, 365sp, 362xp, 362, 371, 371xp, 372, 372xp xp Jonsered 2171, 2071, 2065, 2063, 2163, 2165 turbo
jonsered cs 2159, 2156 and husqvarna 357xp, 359 chainsaw intake manifold boot kit (2159 bin)
Part: intake manifold boot and support and partition. Part # 503 92 85- 01 & 503 92 87-01 & 503 86 62-01 Condition: good used/working shape Fits: Jonsered CS-2159, cs-2156 and Husqvarna 357 xp and 359
(2 in stock)
Jonsered 450 to 520 series chainsaw Rim Drum Clutch Assy
Part: clutch assembly. Includes the sprocket drum, new rim mechanism, bearing and washer Condition: good used/working shape fits: Jonsered 510sp / 510 sp, 520sp / 520 sp, 525, 535, 455, 450
Husqvarna 266, 268, 61, 272 Rim Drum Clutch Assembly (fine thread) includes new replacement rim
Part Name: husqvarna 266, 268, 61, 272, 266xp, 272xp, 268xp Rim drum clutch assembly. 501 77 85-02, 501 83 15-02. Part Description: fine thread rim clutch assembly, including the clutch mechanism (shoes, spring, carrier rotor) the sprocket drum and a new replacement rim Detailed Condition Descrip...
(1 in stock)
jonsered 630, 670 chainsaw air filter (nylon)
Part: nylon air filter Condition: good used/working order Fits: Jonsereds 630, 670 and some other models
jonsered 525, 535, 450, 455 chainsaw starter assembly
Part: starter recoil housing cover with pulley, rewind spring 503 12 38-02 Condition: good used/working shape. May NOT include decal. Fits: Jonsered 525, 535, 450, 455, 520 sp, 520sp, 510sp, 510 sp
Jonsered 70e, 910, 920, 930 chainsaw bucking spike kit with bolts 504 55 06-00 new oem (D-803)
bucking spike and bolts part #s 5045506-00 / 725 23 27-51 New old stock part from closed out dealer Fits: Jonsered 49sp, 52, 52E, 51, 621, 66e, 70 E, 910, 920, 930, 80, 90 series and some other models
(2 in stock)
jonsered 520sp, 450, 510, 525 + chainsaw intake manifold boot
Part: intake manifold boot Part # 504 12 08-09 Condition: good used/working shape Fits the Following Models: Jonsered: 510 450 455 520 525 535
jonsered 630 chainsaw air filter cover
Part: air filter cover Condition: good used/working shape Fits: Jonsered 630 625 series
Jonsered 49SP Chainsaw Flywheel w/Pawls
flywheel rotor with starter pawl/ ratchet and springs in good used shape with no cracks or broken fins. Part #s 504 62 00-16, 504 6456-00, 504 21 73-01 Fits Jonsereds 49sp
jonsered 49sp to 521 series chainsaw fuel cap #1 with gasket
Part: fuel gas cap with gasket, part # 504 70 26-00 and 504 13 54-00 Condition: good used/working shape Fits: Jonsered 49sp, 50, 51, 52, 52e, 521, 521e
jonsered 2041, 2045, 2050 turbo chainsaw bucking spike with bar nut set
Part: bucking spike dawg with bar nuts. Part # 506 01 49-01 Condition: good used/working shape Fits: Jonsered 2041, 2050, 2045, 490, 590 turbo, Husqvarna 45, 40, 49, Partner 400 500 5000 Plus
jonsered 2071, 2171, 2063, 2163, turbo chainsaw choke rod pn 503 70 51-01
Part: choke rod, part # 503 70 51 01 Condition: good used/working shape Fits: Jonsered 2071, 2171, 2063, 2163 2165, 2065 Turbo
jonsered 625 630 chainsaw top cover shroud
Part: top cover 504 60 20-44 Condition: good used/working shape Fits: Jonsered 630 Series
Jonsered 630 625 670 Starter/recoil cover w/Pulley #1
Part: recoil cover with starter pulley and spring 501 77 31-06 Condition Description:good used shape. Rope may or may not be any good. Fits the Following Models: Jonsered 630 625 670
Jonsered 52E Chainsaw Piston Kit 504 41 00-03 NEW
Piston assembly kit includes: piston, rings, wrist pin, and keeper clips. 504 41 00-03, 504 410003, 504 41 00-03 New AFTERMARKET part Fits Jonsered Jonsereds 52 52e 521 521e 521ev and others
Jonsered 510sp, 455, 2055 Clutch Sprocket Rim and Drum .325-7 NEW
Replaceable rim sprocket clutch drum, bearing and rim .325" pitch 7 tooth. Jonsered part numbers: 501 45 74-02, 504 52 30-02, 505 30 36-72, 504 52 30-07, 505 30 36-72, 505 30 36-61, 504 23 34-05, 504 52 00-06, 504 52 00-07, 504 52 30-02, 503 17 40-01, 501 45 74-01. Oregon 33807x, 26950x NE...
(3 in stock)
Jonsered 49sp - 521e Chainsaw Center Drive rim Sprocket NEW (63225) box 13
.325 pitch 7 tooth clutch replaceable center drive rim sprocket assembly .325 x 7 rim and bearing included. Part numbers: 505 30 23-55, 505302355, 505 30 23 55, 503 23 26 01, 504 52 30-06, 504523006, 504 423006, 504 52 30 06, 504 52 30-01, 504 523001, 504523001, 504 52 30 01. NEW aftermark...
jonsered 70e and 621 chainsaw bar nut set
Part: set of bar nuts Part # 504 03 38-00 Condition: good used/working shape Fits: Jonsered 70e 621 and 66e
Jonsered 49SP to 521 series choke rod
Part: Choke rod link - Part # 504 84 31-02 Condition: nice used shape Fits: Jonsered 49 sp, 50, 51, 52, 52e, 521
Jonsered 450 Chainsaw Piston Assembly 503 10 44-01 NEW
42mm diameter piston kit includes: piston, ring, wrist pin, and keeper clips. 503 10 44-01, 503-104401, 503104401 New AFTERMARKET part Fits Jonsered Jonsereds 450 and 455
(4 in stock)
jonsered 621, 80, 90 chainsaw ignition coil (621 bin)
Part: ignition coil. 504 39 17-00 Condition: tested and in good used/working order. Fits: Jonsered 621, 80, 90, 111s Location: 621 bin
jonsered 2171, 2163 turbo chainsaw starter recoil cover and pulley assembly #1
Part: starter housing cover with pulley, rewind spring Part # 503 69 29-02, 503 85 96-01, 503 78 92-01 Condition: good used/working order, aesthetically nice, not perfect but better than #2 Fits: Jonsered 2063, 2071, 2065, 2163, 2171, 2165, 2166, 2172 and 2163 turbo CS2163 CS2171 CS2172 CS2166
jonsered 520 sp chainsaw rear trigger handle kit
Part: both halves, the throttle trigger and safety lever interlock. Part #S 505 34 13-10, 504 65 55-15, 505 27 92-30, 505 27 92-13 Condition: good used/working shape. Fits: Jonsered 520sp, 525, 535, 455, 450
(2 in stock)
jonsered 621 chainsaw air filter cover & nut
Part: filter cover and nut part #s 504 35 79-01 & 504 02 47-00 Condition: good used/working shape. some scuffs/ dings Fits: Jonsereds 621
jonsered 49sp to 52e series chainsaw air filter cover knob
Part: air filter cover knob/nut. PN 504 02 47-01 Condition: good used/working shape Fits: Jonsereds 49 sp, 50, 51, 52, 52e
jonsered 2071, 2171, 372, 371, 365, 362 Turbo chainsaw bucking spike pn 503 54 79-01 (2071 bin)
Part: inner inside bucking spike dawg, part # 503 64 79-01, 503 64 79-02 Condition: good used/working shape Fits: Jonsered 2071, 2171, 2165, 2065, 2172, 2166 Turbo. Husqvarna 365 371 372 XP XPG 365sp special 371xp 372xp
Jonsered 630 670 Chainsaw Gas / Fuel Cap with keeper, and o ring
Part: fuel cap with the keeper and o-ring. 501 43 14-01 Condition: good used shape Fits: Jonsered 625, 630, 670
jonsered 2171 turbo chainsaw fuel tank rear trigger handle assembly #1
Part: fuel tank handle housing with throttle trigger, cable, safety interlock lever, 2 av spring mounts, fuel cap Part # 503 71 91-71 Condition: good used/working order. Some scuffs/dings. Fits: Jonsered 2172 2171 2071 2065 2165 Turbo
(1 in stock)
jonsered 625, 630, 670 chainsaw ignition off switch
PART: off switch 503 56 91 01 CONDITION: good used/working shape FITS: Jonsereds 625, 630, 670
(1 in stock)
jonsered 450, 455, 535 chainsaw ignition coil with lead wire
Part: ignition coil. Part # 506 02 72-02 Condition: good used/working shape. Tested and makes strong spark Fits: Jonsereds 450, 455, 525, 535
jonsered 630, 670 chainsaw starter recoil cover and pulley assembly #2
Part: starter housing cover with pulley, spring and grip Condition: good used/working shape Fits: Jonsered 630, 670
jonsered 510, 520, 535 + chainsaw fuel cap
Part: fuel cap. Part # 504 70 20-02 Condition: good used/working shape, may or may not include keeper. Varies cosmetically. Fits: Jonsered 510, 520, 525, 535, 450, 455
Jonsered 490 chainsaw oil cap
Oil filler cap. Jonsereds part number 504 70 20-04 In good used shape. May vary cosmetically. Fits Jonsered 490 and 590
jonsered 80, 621 chainsaw air filter
Part: air filter Part # 504 35 78-01 Condition: good used/working order Fits: Jonsereds 621, 80
jonsered 670 chainsaw intake boot with support connector
Part: carb to cylinder intake manifold boot Part # 503 61 13-01 Condition: good used/working shape Fits: some models of Jonsereds 670 which have boot type intakes
jonsered 2071, 2171, 2065 turbo chainsaw hand guard handle
Part: chainbrake hand guard brake handle Part # 503 81 18-01 Condition: good used/working shape Fits: Jonsered 2071, 2171, 2065, 2063, 2165 turbo
Jonsered 510SP, 520SP Chainsaw Ignition Coil
Part: Ignition Coil 504 62 00 19 Condition: Good Used / Working Shape. Tested with strong spark. Fits: Jonsered 510 SP, 520 SP Chainsaws
Jonsered 630, 625 Chainsaw Flywheel Cover Shroud
Part: flywheel cover shroud 501 52 61-02 Condition: good used/working shape Fits:Jonsered 625, 630 and some models of 670
Jonsered 625, 630, 670 Fuel, Gas Tank Trigger Handle #1
Part: fuel tank rear trigger handle, bare bones. 501 77 27-03 Condition: good used/working shape, no breaks or leaks. Minor scuffing and fading. Fits: Jonsereds 625, 630, 670
(3 in stock)
Jonsered 2171 Turbo Chainsw Flywheel & Starter Pawls
Flywheel & Starter Pawls Part number 537 05 16-05 In good used shape with no breaks Fits: Jonsered 2171 Turbo Chainsaw, 2165, 2163, 2071, 2065, 2172, 2166 Husqvarna 371, 372, 365, 362, XP 371xp 372xp 365sp 362sp special
(1 in stock)
Husqvarna 36, 41 Chainsaw Ignition Coil
Ignition Coil module. PN 530-039143 530039143 Good used shape, tested and works Fits: Husqvarna 36, 41, 136, 141, 137, 142. Jonsered 2036 2040 Turbo. And many Poulan and Poulan Pro models.
Jonsered 2163, 2171 Turbo Chainsaw Clutch Cover 537 07 20-01 NEW (LOOSE)
Part: Clutch cover with chain tensioner assembly. 537 07 20-01, 503 71 93-01 Condition: NEW Fits: Jonsered 2171, 2172, 2165, 2065, 2071, 2063, 2166 2172 turbo
Jonsered 2050 Chainsaw Cylinder Spring AV Mount 506 01 47-01 NEW 90-50-104
Top handle anti-vibration mount spring that connects the handle to the cylinder head. 506 01 47-01 NEW Fits Jonsered 2045 2041 2050 Turbo. Husqvarna 40 45 49. Partner 400