Part: metal oil cap only - does NOT include the O ring Condition: good used/working shape Fits: Lombard Comango, AL-42, AP-42
Part: shield retaining ring Condition: good used/working shape Fits: Homelite XL101 / XL 101
Part: rear handle half Condition: good used/working shape Fits: McCulloch MS 1839 av, 39cc
Part: plastic oil cap only - does NOT include the O ring Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42
Part: decomp valve kit Condition: good used/working shape Fits: McCulloch Mac 6-10
Part: stop switch button and wire Condition: good used/working shape Fits: McCulloch Mac 6-10
Part: engine housing case cover only. Part # 22135-75101 Condition: good used/working shape. Has some minor pitting/oxidation on bottom of cover. Fits: Shindaiwa 500, 451
Part: sleeve which fits onto the intake manifold Condition: good used/working shape Fits: Poulan model 4018, 40cc 18"
Part: carb gasket Condition: good used/working shape Fits: Poulan 3300
Part: tank insulator Condition: good used/working shape Fits: Poulan 3300
Part: set of wires Condition: good used/working shape Fits: Poulan 3300
Part: safety lever lock Condition: good used/working shape Fits: Poulan 3300
Part: intake manifold insulator Condition: good used/working shape Fits: Poulan model 4018 40cc 18". Also fits some other models.
Part: set of assorted hardware - screw, washers etc. - includes everything pictured Condition: good used/working shape Fits: Poulan 3300
Part: clutch side cover Condition: good used/working shape Fits: Poulan Model 4018 40cc, 18"
Part: fuel pickup filter and line Condition: good used/working shape Fits: Poulan 3300
Part: av buffer mount plug / cap Condition: good used/working shape Fits: Poulan 3300
Part: starter cover Condition: Has some breaks but is usable. Fits: McCulloch D-44
Part:washer plate Condition: good used/working shape Fits: Stihl MS 290
Part: choke link Condition: good used/working shape Fits:McCulloch Pro Mac 60
Part: throttle lock Condition: good used/working shape Fits:Poulan 3300
Part: throttle link Condition: good used/working shape Fits:McCulloch Pro Mac 60
Part: air filter with filter housing base and cover Condition: good used/working shape Fits: Poulan model 4018 40cc, 18". Also fits some other models.
Part: set of bar nuts Condition: good used/working shape Fits: Poulan model 4018 40cc, 18". Also fits some other models.
Part: set of bar studs / bolts Condition: good used/working shape Fits: Poulan model 4018 40cc, 18". Also fits some other models.
Part:chain tensioning screw and bar adjusting nut Condition: good used/working shape Fits: Poulan model 4018 40cc, 18". Also fits some other models.
Part: oil pump gasket Condition: good used/working shape Fits: Poulan 3300
Part: top front handlebar Condition: good used/working shape Fits: Poulan model 4018 40cc, 18in. Also fits some other models.
Part: oil line with two fittings Condition: good used/working shape Fits: Lombard Comango, AP42, AL42 Super Lightning
Part: handlebar Condition: good used/working shape Fits: Poulan 3300
Part: walbro flywheel with starter pawl set Condition: good used/working shape. No broken fins. Fits: Poulan model 4018, 40cc 18"
Part: flywheel cover shroud / air conductor Condition: good used/working shape Fits: Poulan 3300
Part: (1) non snap in type trigger handle cover filler good used working condition fits 154 se sg etc husqvarna
Part: inner guide bar plate Condition: good used/working shape. Edge is chipped/gouged Fits: Lombard Comango, AP42, AL42
Part: check valve and fitting set Condition: good used/working shape Fits: Homelite Super XL
Part: chain tensioning screw Condition: new Fits: Lombard Comango, AP-42 & AL-42 Location: Lombard bin
Part: throttle link rod Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42, AP42d, AP-42D, AP42-d
Part: air filter nut Condition: good used/working shape Fits: Lombard Comango, AP-42 & AL-42
Part: wrist pin Condition: good used/working shape Fits: Lombard Comango
Part: flywheel with starter pawls Condition: good used/working shape. No broken fins. Fits: Echo CS 400 evl
Part:muffler body half Condition: good used/working shape Fits: some models of Homelite Super EZ
Part:plate cover Condition: good used/working shape Fits: Echo CS 400 evl
Part: throttle trigger Condition: good used/working shape Fits: Lombard Comango, AP42, AL42, AP42D, AP-42D, AP42-D
Part:insulator Condition: good used/working shape Fits: Echo CS 400 evl
Part:filter mount bracket and screw Condition: good used/working shape Fits: Lombard Comango, AL42, AP42, Super Lightning, Lightning
Part:crank rod top bearing Condition: good used/working shape Fits: Echo CS 400 EVL
Part:cylinder shroud cover Condition: good used/working shape Fits: Echo CS 400 evl
Part: main bearing Part# 507 425066 Condition: new old stock part. Dusty from years of storage. Fits: Pioneer Super 3270 Location: Pioneer Box 112
Part:air filter Part# 507 428728 Condition: new old stock part. Dusty from years of storage. Fits: Pioneer Super 3270, 3200, 3270 Location: Pioneer Box 111
Part:replacement chip for points and condenser Condition: good used/working shape Fits: many models of chainsaws
Part: muffler shield plate Condition: good used/working shape Fits: Poulan 3400, 3700, 3800, 4000
Part:top cover engine shroud Condition: piece of plastic in middle of cover is broken off on side pictured but is still in good usable shape Fits:Jonsered 490, 590
Part: starter housing cover - includes the pulley, rewind spring and and starter housing cover. Part #s 72173-76110, 22106-75310, 22140-76210 Condition: good used/working shape Fits: Shindaiwa 500
Part: crank washer Fits:Lombard Comango. May also fit other models. Location: Lombard Comango bin
Part: air filter cover nut knob Condition: good used/working shape Fits: old style Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
Part: white starter housing cover only. PN 2921R Condition: good used/working shape Fits: old style Roper built craftsman 3.7 chainsaw with model # 917.353760 & 917.35761. May also fit other models
Part: throttle trigger with safety lever lock, link & pin Condition: good used/working shape Fits: some models of McCulloch Titan chainsaws
Part: spring Part # 965 450 040 Condition: new old stock part. May be dusty from years of storage Fits: some Dolmar models Location: Dolmar box 5
Part: piston and cylinder with ring Condition: good used/working shape. Came off a saw with good compression. No breaks. Fits: Remington Mighty Mite 200
Part:starter housing cover only Condition: good used/working shape Fits: Remington 65 cc SL4 & SL5
Part:air filter cover and knob Condition: good used/working shape Fits: Lombard Comango , Super Lightning, and some other models
Part: top handlebar with no gripping. Silver or black. Condition: good used/working shape Fits: Poulan Micro XXV
Part: off switch plate and washer Condition: good used/working shape Fits: Homelite 360
Part:starter shield plate Condition: good used/working shape Fits: Poulan XX 20
Part: av buffer mount Condition: Has some crackling in the rubber but is still usable with a few miles left in it. Fits: Olympyk 950
Part: throttle link rod Condition: good used/working shape Fits: Homelite 450
Part: set of 6 av buffer mounts Condition: good used/working shape Fits: Shindaiwa 695
Part: chainbrake handle with brake band Condition: good used/working shape Fits: McCulloch Titan 40
Part: rear trigger handle housing - bare bones Condition: good used/working shape Fits: Homelite C7
Part: oil pump button Condition: good used/working shape Fits: Remington Super 754
Part: top cover engine shroud Condition: good used/working shape. minor melting on underside Fits: Craftsman 18" 42cc chainsaws
Part: cushion rubber holder Condition: good used/working shape Fits: John Deere 60 V
Part: starter grip Condition: good used/working shape Fits: McCulloch Titan 40
Part: bottom handle brace plate Condition: good used/working shape Fits: Homelite C7
Part: oil cap a-12222, a12222 Condition: good used/working shape Fits: Homelite 650
Part: air intake deflector Condition: good used/working shape Fits: Homelite 350
Part: cover plate Condition: good used/working shape Fits: Homelite Super EZ
Part: throttle trigger 279063 Condition: good used/working shape Fits: Partner R-16, S50, 55cc rigid handle chainsaws. May also fit some other models.
Part: blue switch button Condition: good used/working shape Fits: Partner R-16 55cc chainsaw. May also fit other models.
Part: crank back plate and bearing Condition: good used/working shape Fits: Homelite 350
Part: starter housing cover only Condition: good used/working shape Fits: Remington SL9
Part: red air filter cover Condition: good used/working shape Fits: Homelite XL 102, XL 101
Part: throttle link rod Condition: good used/working shape Fits: Homelite 350 & 360
Part: crank case housing with bar bolt set Condition: good used/working shape Fits: Homelite 350
Part: crank shaft Condition: good used/working shape Fits: Homelite 350
Part: top front handlebar Condition: good used/working shape. Crack in the rubber gripping has been taped cover. Fits: Homelite 410
Part: crank shaft Condition: good used/working shape Fits: Remington Mighty MIte
Part: brake tension spring Condition: good used/working shape Fits: Stihl 038 av
Part: oil line hose Condition: good used/working shape Fits: Stihl 038 av
Part: oil pump gear Condition: good used/working shape Fits: Stihl 038 av
Part: muffler difusser and spark arrestor screen Condition: good used/working shape Fits: Husqvarna 36, 41
Part: muffler body Condition: good used/working shape Fits: Husqvarna 36, 41
Part: crank shaft. PN 100021 Condition: good used/working shape Fits: Jonsered 361
Part: oil cap Condition: good used/working shape Fits: early (older) Remington Mighty Mite models
Part: bracket mount with screws Condition: good used/working shape Fits: Remington Mighty Mite
Part: crank case tank body Condition: good used/working shape Fits: Remington Mighty Mite
Part: crank case cover with bearing Condition: good used/working shape Fits: Remington Mighty Mite
Part: bar adjusting nut pin Condition: good used/working shape Fits: Remington Mighty Mite
Part: bottom housing base Condition: good used/working shape Fits: Poulan built craftsman chainsaws with model # 358.356241