(1 in stock)
husqvarna 50 chainsaw complete starter recoil cover and pulley assembly #2
Part: starter housing cover with pulley, rewind spring, grip, Part # 503 60 88-03, 505 30 37-35, 501 76 31-01, 503 54 39-01 Condition: good used/working shape. Has a couple broken grills. Fits: Husqvarna 50
(1 in stock)
Husqvarna 242 Special Chainsaw flywheel and starter pawls assembly
Part Name: flywheel with starter pawls / springs / studs. Part number: 501632780 501 63 27-80 501632601 501 63 26-01 Condition Description: in good used shape Fits the Following Models: Husqvarna 242
Husqvarna 242 chainsaw walbro hda84 carburetor
Part: walbro hda 84 carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Husqvarna 42 Special, 242, 246, 242xp xp
Husqvarna 455 Rancher Chainsaw Crankcase Tank #3
Crankcase case chassis bar oil and fuel gas tank assembly. 537 28 20-02 In good used shape. Has some damage from the chain. See photos. Fits Husqvarna 455 Rancher, 460
husqvarna 61, 268, 272 xp chainsaw flywheel only used type 1 non cast key (part # 501 77 82-02)
Part: NON cast key flywheel only. Part # 501 77 82-02, Condition: Good used/working shape. No broken fins Fits: some models of Husqvarna 61, 268, 272 xp
(1 in stock)
husqvarna 268 chainsaw crankshaft (cast key type)
Part: crank shaft and connecting rod Condition: good used/working order Fits: Husqvarna 268 chainsaw models which have cast key flywheels and fine thread clutch mechanisms
Husqvarna 2100cd 2101xp Chainsaw Tank Handle assembly #1
Rear trigger handle. Fuel and oil tank assembly. Includes the tank handle, manual oiler, rubber mounts, trigger, inter lock, oil pump button, and fuel/oil caps. 501 57 12-03 In good used shape, no breaks, no leaks. Fits Husqvarna 2100 CD, 2100, 2101, 2101 xp, 298xp, 298 and others.
(1 in stock)
Husqvarna 45 Chainsaw Cylinder
Cylinder Good used shape Fits Husqvarna 45 saws
husqvarna 455 rancher chainsaw wrist pin bearing and clips
Part: piston wrist pin, clips, bearing Condition: good used/working order Fits: Husqvarna 455 rancher
Husqvarna 268, 272xp chainsaw fuel tank rear trigger handle Complete #2
Part: Complete fuel tank rear trigger handle housing includes: gas tank handle, 6 rubber av buffer mounts, throttle trigger, trigger safety interlock, throttle return spring, and vent. 501 69 90-10 Condition: good used/working order with no leaks. Has some dings and scratches. Fits: Husqvarna 2...
(1 in stock)
husqvarna 268 chainsaw piston and cylinder set #2
Part: piston and cylinder with ring, pin, bearing, bolts, and keeper clip set Condition: good used/working shape. Came off a saw with good compression. Has a few broken fins. Fits: Husqvarna 268
(1 in stock)
Husqvarna 455 Rancher Chainsaw nylon Air Filter
Part: nylon air filter Part # 537 25 57 Condition: good used/working shape Fits: husqvarna 455, 460
husqvarna 246 chainsaw guide bar plate
Part: guide bar plate. PN 503 48 57-01 Condition: good used/working shape Fits: Some models of Husqvarna 42, 242, 246
Husqvarna 246 chainsaw crankshaft
Crank shaft crankshaft with connecting rod. part number 5034592-04 503 45 92-04 Good used shape. Connecting rod bearing in good shape, but crankshaft bearings may not be. Fits some models of Husqvarna 246 saws
(2 in stock)
Husqvarna 246 Chainsaw Oil Pump & Line
Part: oil pump with gear, line and filter Condition: good used/working shape Fits: Husqvarna 246
husqvarna 40, 45 chainsaw oil tank cap
Part: oil tank cap 503 55 16-01 Condition: good used/working shape Fits: Husqvarna 40, 45
(1 in stock)
Husqvarna 45 Chainsaw Chassis with bar studs
Engine housing crankcase chassis, gas/fuel and oil tank. 503 49 82-02 In good used shape Fits Husqvarna 40, 45, 49
(1 in stock)
husqvarna 445, 450, 450e, 445e chainsaw oiler parts
Part: oil pump oiler with hose Part #s 503 93 18-01, 503 93 21-01, 537 15 48-01, 544 08 42-01 Condition: good used/working order Fits: Husqvarna 445, 450, 445e, 450e, 435 435 e
(1 in stock)
Jonsered 2040 chainsaw clutch drum bearing
Part: clutch drum sprocket bearing Condition: good used/working shape Fits: Husqvarna 41 36 136 141 Jonsered 2036 2040
(1 in stock)
husqvarna 51, 55 chainsaw oil pump plunger and barrel new 503 66 01-02 (H-2)
Part: oil pump gear and plunger Part # 503660102 Condition: new oem from closed out dealer Fits: Husqvarna 51, 55
(1 in stock)
Husqvarna 562 XP Chainsaw Oil Pump Assembly 505 19 99-03
Automatic oiler, oil pump assembly with line and pickup. 505 19 99-03, 505199903, 505199906, 505 19 99-06 575 84 78-01, 504 71 00-03 good used shape Fits Husqvarna 562XP 555 Autotune, Jonsered 2260 2258 Turbo
Husqvarna 550XP Chainsaw Fuel Tank Handle 522 87 42 #2
Fuel tank, rear trigger handle assembly. Includes all in photo. Good used shape. Has some staining. Fits Husqvarna 550 xp
Husqvarna 181, 281, 288 Chainsaw Flywheel fan shroud (H-57)
Part: Flywheel fan shroud / air conductor 501 80 19-02 501801902 Condition: New OEM from closed out dealer. Dusty from years of storage. Fits: Husqvarna 181, 281, 288XP
Husqvarna 181 Chainsaw intake manifold new 501 80 66-01 (H-25)
Intake manifold block 501 80 66-01 501806601 new old stock from closed out dealer Fits Husqvarna 181 SE SG
(2 in stock)
husqvarna 240, 240e, 235, 235e chainsaw clutch mechanism new 530-014949 (P-795)
Part: clutch mechanism Part # 530-014949 / 530 01 49-49 Condition: New old stock from closed out dealer Fits: Husqvarna 235, 235e, 240, 240e and some other models
(1 in stock)
husqvarna 281, 288 chainsaw manifold insulator 501811801 new (H-2)
Part: intake manifold insulator sealing collar, part # 501 81 18-01 Condition: New OEM from closed out dealer Fits: Husqvarna 281, 288
(1 in stock)
husqvarna 154, 254 chainsaw gasket 501 86 25-01
Part: gasket. part # 501862501 02 Fits: Husqvarna 154, 254 Condition: good used/working shape
Husqvarna 266 SE chainsaw top cover #2
Top cover. Husqvarna part number 501 68 60-01, 501 68 61 In good, solid used shape, but faded and scuffed with a crack. See photos. Fits Husqvarna 266 se sg xp, 266XP, 266SE, 266SG, 66, Older model 61, 61 Rancher, 61 Practica, 268xp, 268 xp. Older saws only with air filters that are held...
(1 in stock)
husqvarna 51, 55 chainsaw air filter - Felt, non screw type
Part: felt type which does not have the screw through the top of the air filter Condition: good used/working shape Fits: some models of Husqvarna 51, 55
(3 in stock)
Husqvarna 61, 162, 266 & Jonsered 630 chainsaw fine thread clutch carrier
Part: clutch center rotor hub Condition: good used/working shape Fits: Husqvarna 61, 266, 162 & Jonsered 630 chainsaw which are fine thread
(1 in stock)
husqvarna 162 chainsaw filter mount 501 68 11
Part: plastic filter mount / air horn 5016811 Condition: good used/working shape Fits: some Husqvarna 162 /162se and older 61 models
(1 in stock)
Husqvarna 288 chainsaw clutch sprocket drum
Sprocket drum. Husqvarna part number 501 59 78-01 In good used shape Fits Husqvarna 288, 281, 181 XP lite etc.
(1 in stock)
husqvarna 266 chainsaw wrist pin, bearing and keepers set
Part: wrist pin, bearing and keepers for the piston Condition: good used/working shape Fits: Husqvarna 266
(1 in stock)
husqvarna 575 xp chainsaw kill switch wire
Part: ground stop wire, part # 537 20 86 - 01 Condition: good used shape Fits: Husqvarna 570, 575xp , 576xp
(2 in stock)
Husqvarna 575xp Chainsaw AV spring mount 537 21 00
av buffer spring mount 5372100 3/4 In good used shape Fits Husqvarna 570 575xp 576xp 575 576 xp
husqvarna 372xpg chainsaw complete fuel tank rear trigger handle kit
Part: fuel gas tank rear trigger handle kit for heated handles, includes the fuel cap, 2 av spring mounts, throttle cable, throttle trigger, safety interlock release lever, fuel line, and switches. Tank has been tested and does not leak. Switches have good continuity. Replacement part # 503 62 88...
husqvarna 261, 262 xp chainsaw starter recoil cover and pulley assembly #2
Part: starter cover with pulley and recoil spring 503 54 16-01 Condition: good used/working shape. Has a cracked grill Fits: Husqvarna 261, 262xp ID tag may vary in cosmetic detail and numbering
Husqvarna 372 X-Torq Chainsaw Piston and Cylinder Assembly 575 25 57-02
50mm bore complete top end motor kit includes: cylinder head, piston, rings, wrist pin, and clips. Husqvarna part number 575255702, 575 25 57-02, 575 77 41-02, 575774102, 575 77 41-01, 575774101, 575255701, 575 25 57-01 good used shape Fits Husqvarna 372xp X-torque Xtorq X-torq, 372XT, 3...
(1 in stock)
husqvarna 266 se chainsaw muffler type 1
Part: muffler assembly-Part # 501 65 77-03 Condition: good used/working shape-has some minor rust and denting Fits: some models of Husqvarna 266se
(1 in stock)
husqvarna 272, 268, 61, 266 chainsaw late model brake band kit #2
Part: brake band with knee joint lever and dust cover Part #s 503 70 47-01, 503 70 40-01,501 87 53-03 Condition: good used/working shape Fits: Husqvarna 268, 61, 272, 266 se
(1 in stock)
husqvarna 266se chainsaw left, flywheel side crankcase half #2
Part: crank case half (left, flywheel side) Condition: good used/working shape. Has a chip, and still functional. See photos. Fits: Husqvarna 266 se
Husqvarna 288 Chainsaw Piston and Cylinder 54mm Mahle
54mm bore OEM, piston and cylinder set complete. Includes cylinder, piston, ring and wrist pin. In good used shape, makes good compression. Transfer wear from old ring, comes with new ring Fits Husqvarna 181, 281, 288 xp lite etc. with a compression release
Husqvarna 2100 CD Chainsaw clutch #2
clutch mechanism In good used shape but has some cosmetic damage. See photos Fits Husqvarna 2100, 2100CD, 2100 cd, 2101, 298xp and others
husqvarna 575 xp chainsaw crankcase half #2
Part: left (flywheel side) crank case tank half Condition: good used/working shape. Has a chip missing - see photos Fits: Husqvarna 575xp, 570
(1 in stock)
Husqvarna 350 chainsaw lot of assorted hardware #3
Part: lot of misc. hardware- (includes everything pictured) Condition: good used/working order Fits: came off a Husqvarna 350
husqvarna 350 chainsaw top cover hardware kit
Part: top cover hardware bolts screws Condition: good used/working order Fits: Husqvarna 350
(1 in stock)
husqvarna 345, 340, 350, 346xp, 351, 353 chainsaw fuel tank rear handle 2008+ primer equipped #2
Part: fuel tank rear trigger handle, with 2 AV mounts, trigger and spring 503 85 10 Condition: good used/working order. Has minor scuffing, no breaks or leaks. Fits: Husqvarna 340, 345, 350, 353, 351, 346 xp
Husqvarna 350, 346 xp Oiler seal
Part: Oil Oiler Seal, 503 85 48 01 Condition: good used shape FITS: HUSQVARNA 340 345 350 346 351
husqvarna 357xp, 359 chainsaw fuel tank rear trigger handle assembly #3
Part: fuel tank with 2 av spring mounts, trigger Condition: good used/working order Fits: Husqvarna 357 xp, 359
Husqvarna 350 Chainsaw Top Cover Shroud 2008+ w/ primer #2
Part: Top cover shroud, with hole for primer button. 2008+ models. 537 42 19 Condition: Good used/working order. Has some melted area. Fits: Husqvarna 350
(2 in stock)
husqvarna 266, 61, 268, 272 chainsaw starter pawl, stud, and spring kit
Part: starter pawls, studs and springs for the flywheel Condition: good used/working shape Fits: husqvarna 61, 266, 268, 272
husqvarna 562 xp chainsaw guide bar bolt set
Part: set of bar studs / bolts Part # 522 89 38-01 522893801 Condition: good used/working shape Fits: Husqvarna 562xp
(4 in stock)
husqvarna 572xp, 570, 575 xp chainsaw brake bolt
Part: brake bolt/screw (537 20 90-01) Condition: good used/working shape Fits: Husqvarna 570, 575xp 572xp 572 xp 576 576xp
husqvarna 340, 345, 350 chainsaw clutch cover with brake #2
Part: chainbrake clutch cover guard with brake band, cover, spring, levers Part # 537 10 78-03 Condition: good used/working order. Has chip missing and some cracks - see photos Fits: Husqvarna 340, 345, 350, 351, 353, 346xp
husqvarna late model 61 chainsaw top cover #2
Part: top cover engine shroud 503 61 00-03 Condition: good used/working order. Has a crack but still functional Fits: Husqvarna some models (late) of 61, 268
Husqvarna 371, 372 XP Chainsaw 3/8-7 Clutch rim sprocket type 3
Part: clutch rim sprocket/drum 503932601 503 93 26-01 Condition: good used/working shape Fits: Husqvarna 362 365 Special 371 372 XP SP 362SP 365SP 371xp 372xp. Jonsered 2065 2071 2165 2171 2166 2172 Turbo
(2 in stock)
husqvarna 36, 141 + chainsaw muffler bolt set pn 530 01 60-44
Part: muffler bolt Part # 530 01 60 44 530016044 Condition: Good used shape Fits: Husqvarna 36, 41, 136, 141
(1 in stock)
husqvarna 36, 41 chainsaw muffler support bolt pn 530 01 59-02 set
Part: muffler support bolt Part # 530 01 59 02 530015902 Condition: Good used shape Fits: Husqvarna 36 & 41. May also fit other models
Husqvarna 272xp and Jonsered 670 chainsaw clutch spring (670 bin)
Part: (1) clutch spring. Condition: good used/working shape Fits: Husqvarna 272 xp and some models of Jonsered 670
(2 in stock)
husqvarna 338xpt chainsaw cylinder gasket
Part: cylinder gasket Part # 537 10 04-01 537100401 Condition: good used/working shape. Fits: Husqvarna 338 xpt 334t 334 t
husqvarna 262 chainsaw seal retainer with screws type 2
Part: seal retainer with o ring and screws Condition: good used/working order Fits: Husqvarna 262. May fit others
husqvarna 154se chainsaw ignition off switch
Part: off switch Condition: good used/working shape Fits: Husqvarna 154 se, may also fit others
(1 in stock)
Husqvarna 550XP Chainsaw Fuel Tank Handle assembly with TrioBrake and clutch cover
Fuel tank, rear trigger handle assembly with Trio Brake Triobrake and clutch cover. good used shape Fits Husqvarna 550 XP 550XP
husqvarna 2100 chainsaw full wrap top handle bar #2
Part: wrap around handle bar Part # 501 69 52-01 Condition: good used/working order. Had been repaired and is slightly bent. Still quite funtional. Fits: Husqvarna 2100
husqvarna 346xp chainsaw grommet guide pn 503 88 72-01
Part: throttle grommet guide bellows Part # 503887201 Condition: good used/working shape. Some dings. Fits: Husqvarna 346 xp
Husqvarna 435 chainsaw clip on air filter mount/control panel with throttle rod and switch
Part: control panel, includes the filter mount / intake elbow with the throttle rod and control switch. 544 97 66-01, 544 84 43-02, 503 93 66 01, 544 39 26-01, 544 97-64-01, 544 28 44-01 Condition: good used/working shape Fits: Husqvarna 435
husqvarna 61 chainsaw top handle screw set lot of 4
Part: lot of 4 top handle screws Part number: 503 21 06-22 503210622 Condition: good used/working order Fits: Husqvarna 61, 266, 268
husqvarna 51, 55 chainsaw lot of assorted hardware #2
Part: lot of misc. hardware- screws, bolts Condition: good used/working order Fits: Husqvarna 51, 55
(1 in stock)
Husqvarna 40 chainsaw wrist bearing 501 45 16-01
Part: wrist bearing Part Number: 501456101 Condition: Good used shape Fits: Husqvarna 40 45 may also fit other models
(4 in stock)
husqvarna 51, 55 chainsaw carb base mount
Part: carburetor base intake manifold shield intake. Bulkhead assembly Part # 503 76 48 01 Condition: good used/working shape. May have a small crack. Fits: Husqvarna 51, 55, 55 rancher
husqvarna 350 chainsaw intake manifold boot assembly
Part: intake manifold boot assembly, part #s 503 86 62-01, 503 86 64-01 Condition: good used/working shape Fits: Husqvarna 340, 345, 350
(3 in stock)
Husqvarna 340, 345, 350, 346xp, 353, 357, 359 and Jonsered Turbo CS-2141 + chainsaw starter rewind spring (350 bin)
Part: starter recoil spring Part # 537 09 31-01 Condition: good used/working order Fits: Husqvarna 340, 345, 350, 346xp, 353, 357, 359 and Jonsered Turbo CS-2141, CS-2145, CS-2150, 2149, 2159 and some other models
husqvarna 272 chainsaw 52mm piston and cylinder set #2
Part: 52mm bore piston and cylinder with ring, wrist pin, bearing and keeper clip set 503 60 96-71 Condition: good used/working shape. Came off a saw with good compression, no breaks. Piston is in really great shape. Fits: Husqvarna 272xp, 272 XP
Husqvarna 50 chainsaw white air filter top cover with choke assembly #2
Part: Air filter cover, top cylinder cover includes choke assembly 501 76 06 Condition: Good used/ working order. Has a crack - see photos. Fits: some Husqvarna 50 Rancher and others
(1 in stock)
husqvarna 40 series chainsaw starter rewind spring new replaces part # 501 46 04-01 Total No 402 (H-4)
Part: Total starter rewind spring Part # 402 replaces part #s 501 46 04 01 and 501 46 04-02 Condition: new old stock, after-market part Fits: husqvarna 36r, all 40 series, 44, 45, 140, 165r, 240, 244, 340, 444 chainsaws and husqvarna trimmers 36r, 140r, 244r Jonsereds trimmer Rs 45 RS45
(1 in stock)
husqvarna 280 chainsaw clutch sprocket assembly type 2
Part: clutch, includes the spur sprocket drum, bearing and clutch mechanism Condition: good used/working shape Fits: Husqvarna 180 280 and others
(3 in stock)
Husqvarna 372 Chainsaw Carburetor Housing new 503 62 73-03 (H-4)
Carburetor carb Housing filter base / mount. Part number 503 62 73 03 503627303 New OEM from closed out dealer stock Fits Husqvarna 372 362 special
(1 in stock)
Husqvarna 357 359 chainsaw choke lever arm 537 15 80-01 New (H-4)
Walbo choke lever arm Part number 537 15 80-01 537158001 New OEM from old dealer stock. Fits Husqvarna 357 359 and others
Husqvarna 50 Chainsaw Choke slide and clip 501 77 07-03 New (H-4)
Choke slide with clip assembly 501 77 07-03 New OEM from closed out dealer. Has some surface rust from years of storage. Fits Husqvarna 50 series
husqvarna 338xpt, 335xpt, 334T and jonsered cs 2139 T, cs 2135 t chainsaw air filter new pn 537 02 15-01 (hva box h-4)
Part: air filter Part # 537 02 15-01 Condition: new, OEM from closed out dealer stock Fits: Husqvarna 338 xpt, 335 xpt, 334 T and Jonsered CS-2139T, CS-2135T
Husqvarna 288 281 Bottom Case Mount 501 91 70-01 new (H-4)
bracket 501 91 70-01 New OEM from closed out dealer stock Fits Husqvarna 281 288xp
(1 in stock)
HUSQVARNA 350 spark arrestor type MUFFLER kit with bolts and cooling plate (350 BIN)
Part: spark arrestor type muffler with bolts and exhaust cooling plate. Part # 503 86 28-03 / 503 86 28-02 Condition: good used/working order. Minor surface rust / denting. Fits: HUSQVARNA 340, 345, 353, 350, 346 XP AND JONSERED CS2141, CS2147, CS2150, CS2152, CS2153 2152 2153 2149 TURBO
(2 in stock)
husqvarna 3120, 394 + chainsaw clutch spring pn 503 14 51-01 new (bin h-58)
Part: clutch spring Part # 503145101 Condition: New old stock OEM part Fits: Husqvarna 3120, 395, 394, 335, 281, 288, 272 Location: H-58
Husqvarna Combination Tool NEW (H-58) 501 68 89-01
Part: Combination tool part number: 501688901 Condition: New old stock OEM part
(2 in stock)
Husqvarna Movement Limiter for 281 and 288 NEW (H-58) 501 91 89-02
Part: Movement limiter, 501918902 Condition: New old stock OEM part Fits: 281 and 288
(1 in stock)
husqvarna 262, 254, 257 chainsaw deflector shield NEW (H-58) 503 54 37-01
Part: shield / deflector Part # 503 54 37-01 Condition: New old stock OEM part Fits: Husqvarna 254, 257, 262
husqvarna 254, 257 chainsaw throttle control link and guide NEW (H-58) 501 87 68-03
Part: throttle link and guide. PN 501 87 68-03 Condition: New old stock OEM part Fits: Husqvarna 254, 257
husqvarna 55 51 chainsaw top cover shroud #1
Part: top cover 503 60 90-06 Condition: In good used/working shape. May have some slight melting on inside. ID tag may vary. Fits: Husqvarna 55, 51, 55 rancher
husqvarna 261, 262 chainsaw air filter 503 44 72 (nylon type) NEW (H-58)
Part: nylon mesh air filter Part # 5034472 Condition: New old stock OEM part Fits: Husqvarna 261, 262
Husqvarna 268, 272 XP Inner Air Filter Cover NEW (H-58)
Part: inner air filter cover. Part # 503 44 69-01 Condition: New old stock OEM part Fits: Husqvarna 268 and 272 XP Chainsaws
(2 in stock)
Husqvarna Spring Cassette Assy. for 435 and 435E NEW (H-58)
Part: Spring Cassette assy. Condition: New old stock OEM part Fits: 435 and 435E
(1 in stock)
Husqvarna 257 chainsaw flywheel side case half
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape Fits Husqvarna 257, 262, 262xp, and 261
Husqvarna 257 chainsaw clutch side case half
Crankcase half. Right, clutch side. One side of 501 86 00-04 In good used shape Fits Husqvarna 257, 262, 262xp, and 261
husqvarna 254 chainsaw muffler shield 503 74 85-01 new (h-57)
Part: muffler shield plate baffle 503748501 Condition: new from closed out dealer stock Fits: Husqvarna 254
(1 in stock)
husqvarna 371, 372 xp chainsaw air duct new 503 62 84-01 (h-57)
Part:air duct jet / injection horn, part # 503628401 Condition: new OEM from closed out dealer Fits: Husqvarna 371, 372 xp, 371xp, 372xp, 365, 362 Special, 365sp. Jonsered 2063 2163 2065 2165 2071 2171 2166 2172 Turbo
(1 in stock)
husqvarna 335xpt, 338xpt chainsaw intake clamp new 537 16 73-01 (H-57)
Part: clamp for the intake boot Condition: New OEM from closed out dealer stock Fits: Husqvarna 335 336 and 338 xpt
(1 in stock)
husqvarna 357, 359 xp chainsaw brake slide new 537 02 99-01 (H-57)
Part: brake slide washer pn# 537 02 99-01 537029901 Condition: New OEM from closed out dealer stock Fits: Husqvarna 357xp, 359
(1 in stock)
Husqvarna Piston Ring (46mm x 1.5mm) NEW 503 28 90-14 (H-57)
Part: Piston ring (46mm x 1.5mm) 504 28 90-14 504289014 Condition: New old stock OEM part Fits: 51, 55, 257, 357, 359
(2 in stock)
Husqvarna Clutch Drum Assembly Sprocket for 455, 460, 461 NEW (H-47) 537 29 16-04
Part: Clutch drum assembly sprocket, 537 29 16-04 Condition: New genuine OEM part Fits: Husqvarna: 455 E Rancher II, 455 E, 455 Rancher II, 455 Rancher, 460, 461Jonsered: CS2255Redmax: GZ550