(1 in stock)
Husqvarna 262 xp chainsaw muffler gasket
Part: muffler exhaust gasket Condition: good used/working order Fits: Husqvarna 262 xp
(1 in stock)
Husqvarna 394 Chainsaw Throttle Cable new oem 503 52 04-02 (H-66)
Part: throttle cable 503 52 04-02 Condition: New old stock from closed out dealer. Fits: Husqvarna 394 chainsaws-may also fit Husky 395 XP
(1 in stock)
husqvarna 36, 41, 136, 141 chainsaw throttle safety
Part: throttle safety interlock lever. Part of PN 530-069587 Condition: good used/working shape Fits: Husqvarna 36, 41, 136, 141
(1 in stock)
Husqvarna 395xp Chainsaw Fuel Tank Handle Assembly new old stock oem 503 47 34-01 (MGSFU)
Gas tank, rear trigger handle. Includes throttle trigger, cable and safety interlock. 503 47 34-01 New old stock from closed out dealer. A bit dusty and faded from years of storage. May have a few small scuffs. Fits 394 395 XP, 394xp
(1 in stock)
husqvarna 141,136 chainsaw bar chain tensioner adjuster new old stock (H30)
Part: tensioning screw and adjusting pin Part #s 53001586, 530038593, 530016110, 530 01 58-26, 530 03 85-93, 530 01 61-10 Condition: new old stock from closed out dealer. Fits: Husqvarna 141, 136, 142, 137, 36, 41
Husqvarna 455 rancher chainsaw throttle rod grommet used 537 26 04-01
Part: throttle rod link grommet Part # 537260401 Condition: used, good working condition Fits: Husqvarna 455 460 rancher
(1 in stock)
husqvarna 281 chainsaw crankcase housing half (left, flywheel side) NOS 501 80 05 (MGSFU)
Part: crank case housing half, left flywheel side Condition: New old stock from closed out dealer. Bearing turns but may need cleaning or replacing. Fits: husqvarna 281 288 288xp
(1 in stock)
Husqvarna 137 Chainsaw Bar Plate 530 04 78-55 NEW OEM (H-14)
Inner bar plate oil guide. Husqvarna part number 530-047855 NEW old stock from closed out dealer Fits Husqvarna 137, 142
(4 in stock)
husqvarna 359, 357 xp, 353 and jonsered 2159 turbo chainsaw guide bar plate 503 85 66-01 new (H14)
Part: guide bar plate. Part # 503856601 Condition: new old stock from closed out dealer. May have some slight surface rust from years of storage. Fits: Husqvarna 359, 357 XP, 353 and Jonsered 2159 2156 Turbo
(2 in stock)
Husqvarna 372 X-Torq Chainsaw Air Filter Mount new 515 98 29-01 (H-14)
Air horn intake 515 98 29-01 new old stock from closed out dealer. Fits Husqvarna 372xp 365 X-Torq, Jonsered 2166 2172
(3 in stock)
new oem HUSQVARNA Rim Sprocket Assembly .325" x 7 503 98 00-02 (sprkt bin f)
new oem .375 7-tooth rim sprocket, drum and bearing. part# 503 98 00-02, 503980002, Fits Husqvarna 340, 345, 346, 346XP, 346 xp, 350, 353, 351. And Jonsered 2149, 2152, 2153 Turbo346XP, 346XP
(1 in stock)
Husqvarna 240e chainsaw starter rewind spring
Part: starter recoil spring Part # 537 09 31-01 Condition: good used/working order Fits: Husqvarna 240 e and some other models
(1 in stock)
Husqvarna 357xp Chainsaw Auto Valve decompression valve
Automatic compression release valve Decompression Valve Husqvarna 537126803 537 12 68-03 Superseded to 537126805 537 12 68-05 In good used shape Fits 357 XP 359 334t 338xpt with auto valve cylinders
(1 in stock)
Husqvarna 240 X-Torq chainsaw starter cover
Husqvarna 240 x torq starter cover good used working condition
(2 in stock)
new oem husqvarna 298, 285, 2101, 2100 chainsaw flocked air filter (h-47)
Part: air filter, standard Part # 501 61 96-02, 5016196v2 Condition: new old stock oem Fits: Husqvarna 2100, 2101, 298, 285
(1 in stock)
Husqvarna chainsaw 445e 450e new OEM starter recoil housing ASSY (mgsfy)
part: Husqvarna chainsaw 445e 450e new OEM starter recoil housing ASSY condition: new oem part# 544158502, 544 15 85-02
(1 in stock)
Husqvara 334T chainsaw 38mm bore piston and cylinder kit used
Piston and cylinder kit with boot, boot clamp, wrist pin, bearing, and retaining clips. 38mm bore Good used shape Fits Husqvarna 334 T chainsaws
(1 in stock)
husqvarna 338xpt chainsaw av spring mount
Part: spring mount / antivibe element for the tank housing and handle Part # 503 82 33-02 Condition: good used/working shape Fits: Husqvarna 338 xpt 334T 334 T
(1 in stock)
husqvarna 334 t chainsaw chainbrake
Part: chainbrake, includes the hand guard handle, brake band, spring. 503 79 91-05 Condition: good used/working shape, some minor chipping and wear and an edge break on bottom of cover Fits: Husqvarna 334T
husqvarna 334t chainsaw flywheel assembly used
Part: flywheel assembly 537 23 39-01 Condition: good used/working shape Fits: Husqvarna 334 t 338XPT 338 xpt
husqvarna 334t chainsaw starter recoil cover and pulley assembly #2
Part: starter housing cover with pulley, rewind spring and grip. Grips vary cosmetically and ID tag will vary. Part # 503 79 25-01 Condition: good used/working shape. Has some broken grills - see photos. Fits: Husqvarna 334 338 335 xpt 338xpt 335xpt
Husqvarna 334T Chainsaw Spark plug cover
Sparkplug cover plate 537 39 03 good used shape Fits Husqvarna 334 335 338 XPT 334xpt 335xpt 338xpt and others
(1 in stock)
Husqvarna 334t Chainsaw Tank Housing Trigger Handle
Fuel and oil tank housing with throttle control parts. 544 11 09-04 In good used shape. Includes all in photo. Fits Husqvarna 334 T
(1 in stock)
Husqvarna 380CD Chainsaw Piston Kit 501 25 04-03 NEW OEM (upstairs)
52mm Bore A/B piston assembly. Includes: piston, rings, and wrist pin. 501 25 04-02, 501 25 04-03 New old stock from closed out dealer. Dusty from years of storage. Fits Husqvarna 180s 180cd 280cd 380cd 380s 480cd 180 280 380 480 s cd
(1 in stock)
Husqvarna 141 chainsaw piston assembly 40mm 530069454 NEW OEM (upstairs)
40mm bore piston kit w/ ring, wrist pin, and bearing. Husqvarna Part Number 530069454, 530 06 94-54, 530-069454, 530 06 93-41, 530-069341, 530069341 New old stock from closed out dealer. Fits Husqvarna 41, 141, 142. Jonsered 2040 turbo
(1 in stock)
Husqvarna 285 Chainsaw Piston Kit 501 55 92-03 NEW OEM (upstairs)
52mm diameter piston assembly kit includes: piston, rings, wrist pin Husqvarna Part Number 501 55 92-03, b cylinder New oem old stock from closed out dealer. Fits Husqvarna 285 285CD and others
(1 in stock)
Husqvarna 225RJ Trimmer Starter Housing Cover only 502 19 63-03 No Grip (HVA Bulky 1000)
Starter recoil housing cover. 502196303 Fits Husqvarna trimmer models: 225 RJ 232R and others
Husqvarna 572xp Chainsaw Starter Cover Only 575 52 58 NEW (MGSFU)
Starter recoil rewind cover shell only. 5755258 NEW Fits Husqvarna 572 XP / XPG, 565
(1 in stock)
husqvarna 445, 450, 450e, 445e chainsaw top cover cylinder shroud #2
Part: top cover Part # 544 07 95-01 Condition: good used/working order, little melted hole on front edge. Has some scratches and may need some cleaning. Fits: Husqvarna 445, 450, 445e, 450e
husqvarna 362, 365, 372 chainsaw complete fuel tank rear trigger handle kit new oem 544 11 40-07 (MGSFU)
Part: fuel gas tank rear trigger handle kit, includes the throttle cable, throttle trigger, safety interlock release lever, fuel line and vent. part # 503 71 32 75 Condition: New old stock from closed out dealer. Dusty from years of storage. Fits: Husqvarna 362, 365 SP, 372 XP, 371, 371XP, 372XP
Husqvarna 357xp, 359 chainsaw fuel tank rear trigger handlenew OEM 503 92 11 (MGSFU)
Part: fuel tank 5039211 with throttle trigger and spring. Part of 503 92 30-71 Condition: New old stock from closed out dealer. Fits: Husqvarna 357 xp, 359
(1 in stock)
Husqvarna 254, 154 Chainsaw Top Cylinder Cover/Shroud 501 86 95 type 2 new OEM (MGSFU)
Part: top cover 501 86 95-08 5018696 Condition: New old stock from closed out dealer. Dirty and a little scuffed from years of storage. Fits: Husqvarna 254
husqvarna 2100 cd chainsaw complete starter recoil assembly new OEM 501 44 00-03 (BHJSP)
Part: starter housing cover with pulley, rewind spring and air conductor. Part # 501 44 00-02 Condition: new old stock from closed out dealer. Some scuffs/dings from years of storage. Fits: Husqvarna 2100cd, 2100, 2101
(2 in stock)
husqvarna 371, 372, 362, 365 chainsaw top cover and air filter cover set (for low air filter) new OEM (BHJSP)
Part: top cover engine shroud with air filter cover for low air filter. Also has two cover clips. Part number 503 62 78-02, 503 62 80-01, 503 20 34-25, 503 74 01-01 Condition: New old stock from closed out dealer. Fits: Husqvarna 371xp, 365, 362 Special, 365sp, 362sp
husqvarna 371, 372, 362, 365 chainsaw top cover and air filter cover set (for HD air filter) NEW OEM (BHJSP)
Part: top cover engine shroud with air filter cover and clips. PN 503 62 78-08 Condition: New old stock from closed out dealer. Fits: Husqvarna 372, 371, 362, 365, 372xp, 371xp
(1 in stock)
husqvarna 262xp chainsaw air filter cover new OEM #2 (HAB3)
Part: air filter cover, part # 503 54 23-01 Condition: new old stock from closed out dealer. Dusty/dirty/some scuffs from years of storage. No decal. Fits: Husqvarna 262 xp, will also fit 261
(1 in stock)
husqvarna 50, 51, 55 chainsaw starter recoil cover only New OEM 503 60 86-01 (BHJSP)
Part: starter housing cover only 503608601 503 60 86-01 Condition: new old stock from closed out dealer. Dusty and may have a few small scuffs from years of storage. Fits: Husqvarna 50, 51, 55
(1 in stock)
Husqvarna 181se Chainsaw Old Style Crankshaft new old stock 5018015-01 (BHJSP)
Old style crankshaft. 501 80 15-01 501801501 New old stock from closed out dealer. Fits older models of Husqvarna 181 se sg 181sg 181se
Husqvarna268K Cut-off Saw Governor new oem 501 50 24-01 (H-57)
Governor regulator 501502401 NEW old stock from closed out dealer. Fits Husqvarna 268 k 268k K185 K 185 power cutter cut off saws
(1 in stock)
husqvarna 445, 450, 445e, 450e chainsaw crankcase tank chassis housing with bar studs New OEM 537 43 82 (BHJSP)
Part: crank case tank chassis housing with bar studs and oil vent Part number: 5374382 Condition: New old stock. Has a few minor dings from years of storage. Fits: Husqvarna 445, 450, 445e, 450e
(1 in stock)
Stihl MS360 chainsaw piston ring set new OEM 1125 034 3001 (ST-6)
Part: Piston ring set 478mm x 1.2mm 1125034300 11125-034-3001 Condition: new, OEM from closed out dealer Fits: Stihl 036, 036 Pro, MS360
husqvarna 455 rancher, 460 chainsaw complete rear trigger handle assembly #2
Part: rear handle housing, includes both halves the throttle trigger, safety lever interlock, may or may not include mount Part # 537 23 06-01, 537 23 07-01, 537 26 05-01, 537 26 24-01 Condition: good used/working shape. Has dings and scratches. Fits: Husqvarna 455 rancher, 460
(2 in stock)
Husqvarna OEM 371K Cut-off Saw Belt 506 37 27-20 NEW (Misc 1B)
Drive Belt. 506 37 27-20, 506372720 NEW Fits Husqvarna 371K 375K 371 375 950 K k950
Husqvarna 262xp Chainsaw 48mm Mahle Cylinder no decompression
48mm bore Mahle A cylinder In good used shape Fits older Husqvarna 261, 262 XP models without a decompression valve
(1 in stock)
Husqvarna 266 XP chainsaw cylinder #2
Cylinder 50mm bore Mahle. 50ZN11 501 68 55-71 In good used shape. Some broken fins. Fits some Husqvarna 266, 66, 266 SE SG XP, 266SE, 266XP
Husqvarna 372xp Chainsaw Cylinder 50mm Mahle #2
OEM Mahle cylinder. 50zk6 50mm bore. 503 62 64-72 sans piston In good used shape. Some broken fins Fits Husqvarna 371, 371xp, 372, 372xp. Jonsered 2171, 2071 Turbo. Can be retrofit onto 365 Husqvarna and 2165, 2065 Jonsered as an upgrade.
(1 in stock)
husqvarna 41 chainsaw cylinder
Part: piston and cylinder with crankshaft, connecting rod, engine cap Condition: good used/working shape. Came off a saw with good compression. Fits: Husqvarna 41, 141 Jonsered 2040
(2 in stock)
Husqvarna 61 chainsaw 48mm cylinder open port
Part: 48mm cylinder 5015355 5035321 Condition: in good used shape Fits: Husqvarna 61, 162, SE SG Rancher Practica etc, and Jonsered 630
(1 in stock)
husqvarna 162 chainsaw cylinder head #2
Part: OEM Mahle 48mm bore cylinder headCondition: good used/working order with no scoring. has a few broken fins. Photos for reference only. We have more than one.Fits: Husqvarna 162, 61, Jonsered 630
husqvarna 285, 2101, 2100 chainsaw crankcase gasket new 501 29 06-01 (upstairs)
Part: crank case gasket Part # 501290601 Condition: new old stock from closed out dealer. May be a little dirty/have some oil on it from years of storage. Fits: Husqvarna 2100, 2101, 285
(1 in stock)
Husqvarna 262 XP chainsaw flywheel side case half #2
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape, has some paint loss, a chip out and wear spot Fits Husqvarna 262, 262xp, and 261
(1 in stock)
husqvarna 288, 281 chainsaw fuel tank rear trigger handle #2
Part: fuel tank rear trigger handle, bare bones Condition: good used/working shape. Has a warped spot of front mount cup, see photo No leaks. Fits: Husqvarna 288, 281
husqvarna 261, 262 chainsaw av spring mount kit
Part: av spring mount / antivibe elements for the tank, part # 503 51 48-01 Condition: good used/working shape Fits: Husqvarna 261, 262xp Jonsered 2077 2083 turbo
(2 in stock)
husqvarna 262, 261 + chainsaw handle movement limiter pn 503 54 10-01
Part: handle movement limiter Part # 503541001 Condition: used Fits: Husqvarna 262, 261, 51, 55
Husqvarna 288 Chainsaw Cylinder 54mm Mahle
54mm bore OEM cylinder In good used shape Fits Husqvarna 181, 281, 288 xp lite etc. without a compression release
(4 in stock)
Husqvarna 244RX Brush Cutter muffler bolt 725 53 48-55 NEW (H-57)
muffler bolt 725534855 Superseded to 503202985 NEW from old dealer stock. Has some surface rust from years of storage. Fits some large Husqvarna brush cutters and trimmers 244R, 244RX, 250PS, 250R, 250RX, 252RX,36R
husqvarna 359, 357xp, 346xp chainsaw throttle trigger pin 720 18 25-20 (h-57)
Part: throttle trigger pin. 720182520 Condition: new old stock from closed out dealer. Fits: Husqvarna 359, 357 XP, 346 xp, 353, 351, 350, 340, 345 and others
Husqvarna 50, 51, 55 Chainsaw pressure seal 501 76 37-01 (H-57)
Pressure seal Part number 501763701 new old stock from closed out dealer Fits: Husqvarna 50, 51, 55 rancher Chainsaw
Husqvarna 40, 45 chainsaw oil suction hose cpl 503 10 16-01 (h-57)
Part: oil suction hose part # 503101601 Condition: new old stock from closed out dealer Fits: Husqvarna 40, 45 and some other models
(1 in stock)
Husqvarna 435 Chainsaw Clutch Mechanism used
Clutch mechanism with shoes, carrier, and springs 575-568001 Good used shape Fits Husqvarna 435 440 X-torq
(1 in stock)
jonsered 625, 630 & husqvarna 61, 266 chainsaw 2 piece sem ignition coil kit type 2
Part: SEM ignition coil set, includes both the primary and secondary coils. 501 51 62-01, 501 51 61-02 Condition: good used/working shape. Tested and makes strong spark. Fits: Jonsered 625, 630, 630 super, & Husqvarna 61, 266
husqvarna 455 rancher chainsaw oil hose
Part: oil pump oiler hose Part 537 26 15-01 Condition: good used/working shape Fits: Husqvarna 455 rancher and jonsered 2255
OEM husqvarna 365, 371 + chainsaw muffler support pn 503 76 65-03 / 503 76 65-02 new (bin H56)
Part: muffler support bracket Part # 503 76 65 03 / 503 76 65 02/ 503 76 65 01 Condition: New old stock OEM part, may have some slight corrosion from long term storage. Fits: Husqvarna 371xp, 372xp, 362, 365 special, 365sp, 372 XP XPG Location: Husky Bin H-56
(1 in stock)
husqvarna 350, 351 chainsaw 44mm piston kit 503 89 96-03
Part: 44mm piston kit - includes wrist pin and ring Replaces Part # 503 89 96 03 503899603 Condition: good gently used shape Fits: Husqvarna 351, 350 Jonsered 2150, 2149 Turbo. Some saws have 45mm bores, so make sure your saw has the 44mm bore prior to ordering.
(1 in stock)
Husqvarna 61 Chainsaw 48mm closed skirt piston kit 501 53 66-03 NEW OEM (upstairs)
A/B 48mm bore piston kit includes: piston, ring, and wrist pin. 501 53 66-03, 501 53 66-02 New old stock from closed out dealer. Possible take off from a new saw as it has not been fired but appears to have been installed at one point. Fits: Husqvarna 61, 61 Rancher. Older model Husqvarna 61. ...
(1 in stock)
Husqvarna 562xp Chainsaw Piston Kit 505 21 55-02
Piston kit includes: piston, wrist pin, ring, and bearing. 505 21 55-02, 505215502 Good used shape Fits Husqvarna 562xp, 555, 560xp, 560 xp xpg. Jonsered 2258 2260 Turbo.
Husqvarna 242 Chainsaw Piston Assembly 503 51 32-71 NEW oem (upstairs)
42mm bore piston kit with ring, wrist pin, and keepers 503 51 32-71 New old stock from closed out dealer. Fits Husqvarna 242, 42 special
husqvarna 345, 346xp chainsaw 42mm piston kit new OEM (upstairs)
Part: 42mm piston kit - includes the pin and keeper clip set Condition: new, old stock from closed out dealer 503 90 73-71 Fits: husqvarna 345, 346 xp older models
(1 in stock)
husqvarna 350, 351 chainsaw 44mm piston kit new OEM 503 89 96-03 #3 (upstairs)
Part: 44mm piston kit - includes wrist pin and clips Replaces Part # 503 89 96 03 503899603 Condition: new old stock from closed out dealer. Fits: Husqvarna 351, 350 Jonsered 2150, 2149 Turbo. Some saws have 45mm bores, so make sure your saw has the 44mm bore prior to ordering.
(2 in stock)
husqvarna 350, 351 chainsaw 44mm piston kit new OEM 503 89 96-03 #2 (upstairs)
Part: 44mm piston kit - includes wrist pin Replaces Part # 503 89 96 03 503899603 Condition: new old stock from closed out dealer. Fits: Husqvarna 351, 350 Jonsered 2150, 2149 Turbo. Some saws have 45mm bores, so make sure your saw has the 44mm bore prior to ordering.
husqvarna 575 chainsaw 51mm piston kit new oem 537 32 85-02 (upstairs)
Part: piston kit - includes the rings, wrist pin and keeper clips Condition: new, old stock from closed out dealer 537328502 Fits: Husqvarna 575xp
husqvarna 357xp chainsaw 46mm piston kit new oem 537 21 96-02 #2 (upstairs)
46mm bore A/B piston with wrist pin and ring. Part # 537 21 96 02 New old stock from closed out dealer. Fits: Husqvarna 357 xp, Jonsered 2156 Turbo
(2 in stock)
husqvarna 357xp chainsaw 46mm piston kit new oem 537 21 96-02 (upstairs)
46mm bore A/B piston with wrist pin . Part # 537 21 96 02 New old stock from closed out dealer. Fits: Husqvarna 357 xp, Jonsered 2156 Turbo
(1 in stock)
husqvarna 357 chainsaw screw pn 537 22 29-01 new (bin H-16)
Part: screw Part # 537222901 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 357 Location: Husky bin H-16
(1 in stock)
husqvarna 570 chainsaw 49mm piston kit new oem 537 25 47-02 (upstairs)
Part: 49mm piston kit, includes the wrist pin and keeper clips Condition: new old stock from closed out dealer. Fits: Husqvarna 570
(1 in stock)
husqvarna 350, 351 chainsaw 44mm piston kit new OEM 503 89 96-03 (upstairs)
Part: 44mm piston kit - includes ring, wrist pin and keeper clips Replaces Part # 503 89 96 03 503899603 Condition: new old stock from closed out dealer. Fits: Husqvarna 351, 350 Jonsered 2150, 2149 Turbo. Some saws have 45mm bores, so make sure your saw has the 44mm bore prior to ordering.
(1 in stock)
husqvarna 372, 362, 365 chainsaw fuel tank rear trigger handle #3 faded glory
Part: fuel tank rear trigger handle. Includes two av mounts, throttle trigger and cable. 503 71 32 75 Condition: good used/working shape. Plastic is scuffed/dinged/faded/discolored. Photos for reference only, you may not receive this exact one. Fits: Husqvarna 372, 362, 365, 371, 371xp, 372xp, ...
(1 in stock)
husqvarna 372, 362, 365 chainsaw fuel tank rear trigger handle bare bones #2 faded glory
Part: fuel tank rear trigger handle, bare bones 503 71 32 75 Condition: good used/working shape. Plastic is scuffed/dinged/faded/discolored. Photos for reference only, you may not receive this exact one. Fits: Husqvarna 372, 362, 365, 371, 371xp, 372xp, 365sp
(1 in stock)
husqvarna 50 chainsaw piston and cylinder set new OEM #2 503 96 84-71 (upstairs)
Part: 44mm diameter bore top end. Includes: cylinder, piston, ring, and wrist pin. 503968471 Condition: new old stock from closed out dealer. Fits: Husqvarna 50, 50 Rancher Special or Practica
(1 in stock)
husqvarna 50 chainsaw piston and cylinder set new OEM #1 503 96 84-71 (upstairs)
Part: 44mm diameter bore top end. Includes: cylinder, piston, ring, wrist pin, clips and bearing. 503968471 Condition: new old stock from closed out dealer. Fits: Husqvarna 50, 50 Rancher Special or Practica
(1 in stock)
Husqvarna 288 Chainsaw Piston and Cylinder kit new OEM 54mm 544 22 31-02 (upstairs)
54mm bore OEM, piston and cylinder set complete. Includes cylinder, piston, ring, clips, wrist pin, and bearing. New old stock from closed out dealer. Fits Husqvarna 181, 281, 288 xp lite etc. with a compression release
(3 in stock)
Husqvarna 435 chainsaw ignition coil new aftermarket (bin 522)
Part: ignition coil module 573 93 57-02 573 93 57 02 Condition: new aftermarket part Husqvarna 435, 435 E, 440 E, 445, 445 E, 450 and 450 E chainsaws Jonsered CS2245, CS2245 S and CS2250 S chainsaws
(4 in stock)
Husqvarna 346xp, 353 Chainsaw Clutch Sprocket rim system (sprkt bin 4)
Sabre brand Rim Clutch Sprocket System 108215x. Replaces Husqvarna part number 503 98 00-71 and Oregon 108215x. Includes Drum and .325 - 7 tooth sprocket New Fits Husqvarna 346XP, 346 xp, 353, 351. And Jonsered 2149, 2152, 2153 Turbo
(2 in stock)
Husqvarna 359 Chainsaw carburetor replaces ZAMA c3-el42 NEW (NCB)
Part: Aftermarket carburetor replaces C3 EL42. 503 96 76-01 Replaces: 503 28 18-15, 503 28 18-16, 505 23 68-01, 505 20 30-02, 505203002 NEW aftermarket part Fits Husqvarna models 359, 357xp, 357xpg. Jonsered 2156 2159 Turbo.
(1 in stock)
husqvarna 350 and jonsered 2150 chainsaw piston and cylinder set NEW OEM Mahle 503 86 99-71 (upstairs)
Part: 44mm Bore piston and cylinder with ring and wrist pin Part # 503869971 Condition: new, old stock from closed out dealer. Fits: Husqvarna 350 and Jonsered CS 2150 turbo. Will retrofit onto Husqvarna 346xp, 351, 353 & Jonsered 2149, 2152, 2153
(1 in stock)
Husqvarna 550xp Chainsaw handle insert 504 10 63
handle insert 5041063 good used shape Fits Husqvarna 545, 550 xp.
(1 in stock)
husqvarna 394, 395 chainsaw av spring mount 503 46 94-02 new oem (H-18)
Part: antivibe element / av spring mount Part # 503469402 Condition: new old stock from closed out dealer. Fits: Husqvarna 394, 395xp
(4 in stock)
Husqvarna 372 Chainsaw Rubber Carburetor Support Piece new oem 503 67 86-01 (H-18)
Carburetor support 503 67 86-01 new old stock from closed out dealer. Husqvarna 372, 371, 365, Jonsered 2171, 2165
(1 in stock)
husqvarna 335 xpt chainsaw ignition coil grommet new oem 503 90 09-01 (H-18)
Part: grommet for end of ignition coil Condition: new old stock from closed out dealer. Fits: Husqvarna 335xpt 336 338 339
husqvarna 385 xp chainsaw air duct new oem 537 00 79-01 (H-18)
Part: turbo air duct . PN# 537007901 Condition: new old stock from closed out dealer. Fits: husqvarna 385xp Jonsered CS-2186 CS 2186 CS2186
(1 in stock)
husqvarna 254, 257, 154 chainsaw handle spacer new oem 501 86 72-02 (H-18)
Part: top handle brace , part # 501867202 Condition: new old stock from closed out dealer. Fits: husqvarna 254, 257, 154
(1 in stock)
Husqvarna 365 Chainsaw Carbuteror Grommet for Saws With Zama Carburetors new oem 503 75 52 (H-18)
Carburetor hi lo adjustment sleeve pn# 503755201 new old stock from closed out dealer. some models of Husqvarna 365, Jonsered 2065
(1 in stock)
husqvarna 385 xp chainsaw carburetor sleeve 503 99 93-01 new oem (H-18)
Part: carb sleeve / grommet, part # 503999301 Condition: new old stock from closed out dealer. Fits: husqvarna 385xp Jonsered CS2186 CS 2186 CS-2186
(4 in stock)
Husqvarna 42 Special Chainsaw Carburetor Adjust Grommet sleeve new oem 501 62 86-01 (H-18)
Part: carburetor adjust grommet sleeve Part # 501628601 Condition: New old stock from closed out dealer. Dusty/dirty from years of storage. Fits: Husqvarna 42 Special 242 and others.
Husqvarna 570, 575 xp chainsaw throttle spring 537 20 98-01 new oem (H-18)
Part: throttle trigger spring, part # 537209801 Condition: New old stock from closed out dealer Fits: Husqvarna 570, 575xp 576xp 576 xp
(1 in stock)
Husqvarna 371 K Power Cutter retaining ring NEW 506 28 76-01 (H-10)
retaining ring 506287601 New part from old stock dealer Fits Husqvarana 371K cut off saws
Husqvarna 357XP chainsaw cylinder base gasket 503 96 66-01 NEW OEM (H-10)
Part: cylinder base gasket 503 96 66-01 Condition: NEW old stock from closed out dealer. Fits: husqvarna 359 357 355 xp 357xp. Jonsered 2159 2156 Turbo.
(1 in stock)
husqvarna 357, 359 and jonsered 2159 turbo chainsaw gasket set pn 503 97 85-01new oem (H-10)
Part: gasket kit, includes the crankcase, cylinder base and muffler exhaust gasket Condition: new old stock from closed out dealer. Part # 503978501 Fits: Husqvarna 357 xp xpg, 357xp, 359 and Jonsered 2159, 2156 turbo
husqvarna 365, 371, 372, 362 & Jonsered 2171, 2071 + chainsaw gasket new 503 62 72-01 (H-10)
Part: Crankcase gasket Condition: new old stock from closed out dealer. Fits: Husqvarna 365, 371, 372, 362 XP SP 371xp 372xp 365sp 362sp. Jonsered 2171, 2071, 2165, 2065, 2063 Turbo