husqvarna 285 chainsaw rubber plug
Part: rubber plug Condition: good used/working shape Fits: Husqvarna 285
husqvarna 362 and Jonsered 2063 chainsaw piston with ring (Loc:362 bin)
Part: piston and ring Condition: good used/working shape Fits: Husqvarna 362 special, xp. Jonsered 2063 Turbo.
husqvarna 371, 372 xp chainsaw air filter mount and base set
Part: air filter housing base and mount Condition: good used/working shape Fits: Husqvarna 371, 372 xp
husqvarna 36, 41 chainsaw choke rod
Part: choke rod lever. PN 530-029831 Condition: good used/working shape Fits: Husqvarna 36, 41
husqvarna 288 chainsaw chain catcher stop
Part: chain catcher stop Condition: good used/working shape Fits: Husqvarna 288
(4 in stock)
husqvarna 181 chainsaw throttle trigger
Part: throttle trigger Part # 501 80 55-01 Condition: good used/working shape Fits: Husqvarna 181
husqvarna 40, 45, 49 chainsaw screw pn 503 21 06-16 new (box H-49)
Part: pulley screw Part # 503 21 06 16 Condition: new old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 40, 45, 49 and some other models Location: Box H-49
(4 in stock)
husqvarna 254, 257 chainsaw throttle safety catch pn 501 87 77-02 new (box H-49)
Part: throttle safety lever catch Part # 501 87 77 02 Condition: new old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 254, 257 Location: Box H-49
Husqvarna 181 Chainsaw crankcase case half, flywheel side
Part: Crank case half flywheel side Condition: Good Used/ Working Condition Fits: Husqvarna 181
Husqvarna 50, 51, 55 chainsaw starter pawl stud and spring set
Part: Starter pawl stud and spring set. DOES NOT INCLUDE THE PAWLS Condition: Good used/ working condition Fits: Husqvarna 50, 51, 55
(3 in stock)
husqvarna 36, 41 chainsaw cylinder cover screw pn 530 01 59-03 new (box H-49)
Part: cylinder cover screw Part #530 01 59 03 Condition: new old stock OEM part. Dusty/dirty from years of sitting in storage. Fits: Husqvarna 36, 41 Location: Box H-49
(2 in stock)
husqvarna 340, 345, 350 chainsaw starter sleeve pn 501 63 06-01 new (box H-46)
Part: starter bushing sleeve Part # 501 63 06 01 Condition: new old stock OEM part Fits: Husqvarna 340, 345, 350, 346xp 353 351 371 371xp 372 372xp 365 362 359 357xp. Jonsered 2141 2145 2150 2152 2153 2156 2159 2063 2163 2065 2165 2166 2171 2071 2172 Turbo. And others. ...
husqvarna 266, 61 chainsaw muffler attachment plate pn 501 60 84-01 new (h-46)
Part: muffler attachment bracket plate Part # 501 60 84 01 Condition: new old stock OEM part. Has minor rust from years of storage. Fits: some models of Husqvarna 266, 61 Location: box H-46
husqvarna 65L chainsaw clutch hub pn 501 27 79-01 new (box H-44)
Part: clutch hub / spider carrier Part # 501 27 79 01 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 65 L Location: Box H-44
(3 in stock)
husqvarna 40, 45 chainsaw left rear trigger handle half
Part: left side rear trigger handle half. Part # 503 10 56-02 Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 285 cd chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, spring and grip. 501 40 18-02 Condition: good used/working shape Fits: Husqvarna 285cd, 285 CD
husqvarna 371, 372 chainsaw set of keeper clips / rings
Part: piston keeper ring / clip set Condition: good used/working shape Fits: Husqvarna 371, 372
husqvarna 40, 45 chainsaw assorted hardware lot - screws
Part: lot of assorted hardware – screws, nuts – everything pictured Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 162 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley and spring Condition: good used/working shape Fits: Husqvarna 162
(1 in stock)
husqvarna 162 chainsaw bar nut set
Part: set of bar nuts Condition: dinged up but in good used/working shape Fits: Husqvarna 162
(1 in stock)
husqvarna 162 chainsaw manifold insulator
Part: insulator Condition: good used/working shape Fits: Husqvarna 162
(1 in stock)
husqvarna 261, 262 chainsaw starter rewind spring
Part: starter rewind spring 501 63 02-02 Condition: good used/working shape Fits: Husqvarna 261, 262xp, 257, 254
jonsered 49sp chainsaw electronic chip
Part: electronic chip to replace points and condenser Condition: good used/working shape Fits: Jonsered 49 sp
husqvarna 285 cd chainsaw handle hodler pn 501 60 94-01 new (bin H-30)
Part: handle holder support Part # 501 60 94 01 Condition: New old stock part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 285 CD Location: H-30
husqvarna chainsaw screw pn 725 53 37-55 new (bin H30)
Part: screw Part # 725 53 37 55 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: many Husqvarna chainsaw models, such as 266, 61, 272, 181, 281, 272 Location: Husky Bin H-30
(1 in stock)
husqvarna 480, 77 chainsaw idle speed screw pn 501 22 19-01 new (bin H30)
Part: idle speed screw Part # 501 22 19 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 480, 77, 180 s Location: Husky Bin H-30
husqvarna 357, 359 chainsaw screw pn 503 20 07-10 new (bin H-16)
Part: screw, m5 x 10 Part # 503 20 07 10 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 359 357 Location: Husky bin H-16
(1 in stock)
husqvarna 480, 77, 65 chainsaw carb throttle shaft pn 501 69 10-01 new (bin H-22)
Part: carburetor throttle shaft Part # 501 69 10 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 480, 77, 65 Location: Husky bin H-22
husqvarna 285, 2100, 1100 chainsaw carb choke shaft pn 501 48 37-01 new (bin H-22)
Part: carburetor choke shaft Part # 501 48 37 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 285, 2100, 1100 Location: Husky bin H-22
husqvarna 268 special screw pn 729 53 42-05 new (bin h-18)
Part: filter base screw Part # 729 53 42-05 Condition: New old stock OEM part. May or may not be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 268 Special Location: Husky Bin H-18
(1 in stock)
husqvarna 44, 444 chainsaw throttle lock pn 501 82 08-01 new (bin H-11)
Part: throttle safety lever Part # 501 82 08 01 Condition: New old stock OEM part. May be dusty/dirty/have minor scuffs from years of storage. Fits: Husqvarna 44, 444 Location: Husky Bin H-11
husqvarna 266 268 + chainsaw shaft pn 501 51 97-02 new (h-003)
Part: trigger shaft Part # 501 51 97 02 Condition: New old stock OEM part Fits: Husqvarna 266, 268, 61, 272
husqvarna 33, 38 chainsaw air filter pn 507 43 33-85 new (bin H-11)
Part: air filter element Part # 507 43 33 85 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 33, 38. Jonsered 370 380. Location: Husky Bin H-11
husqvarna 357, 359 chainsaw choke control pn 503 92 25-01 new (bin h-11)
Part: choke control lever Part # 503 92 25 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 357, 359 Location: Husky Bin H-11
(1 in stock)
husqvarna 44, 240 + chainsaw muffler bracket pn 501 57 44-01 new bin h-51
Part: muffler support bracket Part # 501 57 44 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years or storage Fits: Husqvarna 44, 444, 340, 240 Location: bin H-51
(1 in stock)
husqvarna 268 chainsaw starter pulley pn 503 10 24-03 new bin h-50
Part: starter pulley Part # 503 10 24 03 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 268, 61 Late Location: Bin H-50
(4 in stock)
husqvarna 240 chainsaw gasket pn 501 45 63-01 new bin h-50
Part: gasket Part # 501 45 63 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 240 S Practica, 240 SE, 240 SG, may also fit other models Location: Bin H-50
(2 in stock)
husqvarna 50, 45 + chainsaw oil pump drive gear pn 503 10 49-02 new bin h-50
Part: oil pump worm drive gear / wheel Part # 503 10 49 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 40, 45, 50, 51, 55 Location: Bin H-50
husqvarna 3120 chainsaw starter pulley pn 501 89 67-01 new bin h-15
Part: starter pulley Part # 501 89 67 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 3120, may also fit other models Location: Bin H-15
(1 in stock)
husqvarna 50 chainsaw brake arm lever pn 501 82 92-02 new bin h-15
Part: brake arm lever Part # 501 82 92 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 50 Location: Bin H-15
husqvarna 281, 288 chainsaw filter mount bolt pn 503 20 21-13 new box h-12
Part: filter mount bolt Part Number: 503 20 21 13 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 288, 281 Location: Box H-12
(2 in stock)
husqvarna 570, 575 + chainsaw air filter knob pn 502 20 83-02 new box h-12
Part: air filter knob Part Number: 502 20 83-02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 570, 575, 371, 362, 372 Location: Box H-12
(2 in stock)
husqvarna 281, 181 + chainsaw piston clip pn 501 29 86-01 new box H-23
Part: (1) piston clip / keeper Part Number: 501 29 86 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 281, 181, 1100 cd, 285 Location: Box H-23
husqvarna 365, 362, 371, 372 chainsaw av spring mount (hard) new pn 503 89 56-02 (box h-23)
Part: av spring mount - hard. Mounts onto the side of the fuel tank Part Number: 503 89 56 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 365, 362, 372, 371 Location: Box H-23
(1 in stock)
husqvarna 266, 162 + chainsaw bushing pn 501 52 78-01 new box h-2
Part: bushing Part Number: 501 52 78 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 266, 162 SE & SG, 162, 181, 281 Location: Box H-2
husqvarna 61 chainsaw ball pn 503 41 92-01 new box h-2
Part: ball Part Number: 503 41 92 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 61 Location: Box H-2
husqvarna 444, 44 chainsaw saw dust guard pn 501 82 91-01 new box h-2
Part: sawdust chip guard Part Number: 501 82 91 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 444, 44 Location: Box H-2
husqvarna 365, 362 chainsaw pin coupling nut pn 501 53 74-01 new box h-2
Part: pin coupling / bar adjusting nut Part Number: 501 53 74 01 Condition: new old stock part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 365, 362 Location: Box H-2
husqvarna 163 chainsaw ignition coil
Part: ignition coil Condition: good used shape, tested and works Fits: Husqvarna 163
husqvarna 50 chainsaw flywheel cover
Part: flywheel cover Condition: good used/working shape Fits: Husqvarna 50
(1 in stock)
husqvarna 394 xp chainsaw bar bolt set
Part: set of bar studs / bolts 501 81 57-01 Condition: good used/working shape Fits: Husqvarna 394 395 XP 394xp 395xp
husqvarna 242 chainsaw ignition coil module
Part: ignition module Condition: good used shape, tested and works Fits: Husqvarna 242
(2 in stock)
husqvarna 50 chainsaw intake manifold base and boot
Part: intake manifold base and intake boot Condition: good used, working shape Fits: Husqvarna 50
husqvarna 395 chainsaw 56mm piston kit new
Part: 56mm piston with rings, pin and keepers. Part number 537 13 76-71 Condition: new, after-market part Fits: Husqvarna 395 xp, 395xp Location: new piston box
Husqvarna 50, 51, 55, Chainsaw Plug Cover
Part: Plug cover. PN 501 76 44-03 Condition: Good used/working shape Fits: Husqvarna 50, 51, 55
husqvarna 240 chainsaw starter/recoil cover and pulley assembly
Part: starter cover with pulley and spring Condition: good used/working shape-has several broken grills Fits: Husqvarna 240
husqvarna 65L chainsaw ignition off switch and panel
Part: ignition off switch and panel Condition: good used/working shape-panel has an edge break Fits: Husqvarna 65 L
Husqvarna 61 Chainsaw Cylinder Plug
Part: Cylinder Plug Condition: Good used/working shape Fits: Husqvarna 61
Husqvarna 61 Chainsaw Filter Mount w/ Carb Bolts
Part: Filter mount w/ carb bolts Condition: Good used/working shape Fits: Husqvarna 61
Husqvarna 266 SE 48mm Chainsaw Piston, Ring, Bearing and Pin
Part: Piston, ring and bearing Condition: Good used/working shape Fits: Husqvarna 266 SE 48mm
Husqvarna 280 CP Chainsaw Top Cover Shroud
Part: CP Top cover shroud Condition: Good used/working shape. Has long hairline crack Fits: Husqvarna 280 CP
(2 in stock)
husqvarna 350 chainsaw inner and outer bar plate set
Part: inner and outer bar plate set Condition: good used/working shape Fits: Husqvarna 350
(4 in stock)
Husqvarna 350, 345, 340 Chainsaw Filter Mount intake elbow only
Part: Filter mount air intake. PN 503 86 94-01 Condition: Good used/working shape Fits: Husqvarna 350, 345, 340
Husqvarna Practica 44 Chainsaw Bar Chain Tensioner Adjuster
Part: Bar chain tensioner adjuster 501 45 41-01, 501 54 63-01 Condition: Good used/working condition Fits: Husqvarna Practica 44, 444, 140, 140s and others
Husqvarna Practica 44 Chainsaw Intake Manifold
Part: Intake manifold Condition: good used/working condition Fits: Husqvarna Practica 44
(2 in stock)
Husqvarna 36, 41 Chainsaw Muffler
Part: muffler 530 06 94-15Condition: good used/working shapeFits: Husqvarna 36, 41. Jonsered 2036 2040
(1 in stock)
Husqvarna 36, 41 Chainsaw Muffler Heat Shield
Part: muffler heat shield Condition: good used/working shape Fits: Husqvarna 36, 41
(1 in stock)
Husqvarna 36, 41 Chainsaw air duct cleaner with turbo clean seal
Part: Intake air duct (air cleaner) pn 530-029813 & seal, pn 530-019203 Condition: good used/working shape Fits: Husqvarna 36, 41
husqvarna 272 xpg chainsaw rear trigger handle fuel tank assembly for heated handle
Part: rear trigger handle/fuel tank assembly with heated handle-includes (6) av mounts, throttle trigger, safety, switch, fuel cap, fuel line/filter Condition: good used/working shape with no breaks or leaks-has some paint loss Fits: Husqvarna 272 xpg
(1 in stock)
husqvarna 262 xp chainsaw oil cap
Part: oil cap Condition: good used/working shape Fits: Husqvarna 262 XP
husqvarna 257 xp chainsaw flywheel and starter pawls
Part: flywheel and starter pawls 503 52 94-01 Condition: good used/working shape with no broken fins Fits: Husqvarna 257 XP
(2 in stock)
husqvarna 359, 357 xp, 353 and jonsered 2159 turbo chainsaw guide bar plate (359 bin)
Part: guide bar plate. Part # 503 85 66-01 Condition: good used/working shape Fits: Husqvarna 359, 357 XP, 353 and Jonsered 2159 2156 Turbo
husqvarna 359, 357 xp chainsaw 5 piece av spring mount set
Part: 5 piece mount set Condition: good used/working shape Fits: Husqvarna 359, 357 XP
husqvarna 455 chainsaw u nut clip set of 3
Part: u nut, to mount top cover 503 22 69-02 Condition: good used/working shape Fits: Husqvarna 455
(3 in stock)
husqvarna 455 chainsaw choke link rod
Part: choke rod. 537 25 56-01 Condition: good used/working shape Fits: Husqvarna 455, 455 Rancher, 460
(2 in stock)
husqvarna 141, 136 chainsaw crankcase cover
Part: crankscase cover. Part # 530-052428 / 530052428 Condition: good used/working shape Fits: Husqvarna 141, 136
(3 in stock)
husqvarna 136, 141 chainsaw intake sleeve/boot
Part: intake sleeve. Part # 530029814 / 530-029814 Condition: good used/working shape Fits: Husqvarna 141, 136, 137, 142, Jonsered 2036, 2040
Husqvarna 285 Chainsaw Inner Bucking Spike type 2
Part: inner spike Condition: good used/working shape Fits: Husqvarna 285
(1 in stock)
Husqvarna 285 Chainsaw Choke Button Link
Part: choke Condition: good used/working shape Fits: Husqvarna 285
(1 in stock)
Husqvarna 246, 42 Chainsaw Oil Cap
Part: oil cap. PN 501 62 66-02 Condition: good used/working shape. May not include keeper. Fits: Husqvarna 246, 42
(1 in stock)
Husqvarna 246 Chainsaw Flywheel Cover Shroud
Part: flywheel cover 503 51 14-01 Condition: good used/working shape. May be orange or black. Fits: Husqvarna 246, 242, 42 Special
Husqvarna 50 Rancher Chainsaw Fuel Tank Trigger Handle
Part: fuel tank trigger handle-includes the throttle trigger and safety Condition: good used/working shape-has some scuffing-especially on the bottom Fits: Husqvarna 50 Rancher
Husqvarna 50 Rancher chainsaw Bucking Spike and Bolts
Part: spike with bolts Condition: good used/working shape Fits: Husqvarna 50 Rancher
(1 in stock)
Husqvarna 50 Rancher Chainsaw Intake Manifold & Boot
Part: intake manifold with the boot 501 77 11-01 Condition: good used/working shape Fits: Husqvarna 50 Rancher Special
(1 in stock)
Husqvarna 254 Chainsaw 3/8-7 Clutch Rim Drum & Bearing
Part: 3/8-7 clutch drum, bearing and rim Condition: good used/working shape Fits: Husqvarna 254
Husqvarna 285 Chainsaw Bucking Spike type 1
Part: bucking spike Condition: good used/working shape Fits: Husqvarna 285
(1 in stock)
Husqvarna 181 Chainsaw Air Filter Mount & Bolts
Part: filter mount with bolts Condition: good used shape Fits: Husqvarna 181
(1 in stock)
Husqvarna 242 Chainsaw Pre Filter & Cover
Part Name: pre filter and cover Condition: good used/working shape Fits: Husqvarna 242 chainsaws
(2 in stock)
Husqvarna 242 Chainsaw Clutch Rim Drum
Part Name: clutch rim drum Condition: good used/working shape Fits: Husqvarna 242 chainsaws
Husqvarna 242 Chainsaw Clutch Set Mechanism
Part Name: clutch mechanism Condition: good used/working shape Fits: Husqvarna 242 chainsaws
Husqvarna 242 Chainsaw Bar/Chain Tensioner Adjuster
Part Name: chain tensioner Condition: good used/working shape Fits: Husqvarna 242 chainsaws
Husqvarna 44 Chainsaw Starter Pulley
Part Name: Starter Pulley Condition: good used/working shape Fits: Husqvarna 44 chainsaws
(2 in stock)
Husqvarna 44 Chainsaw Choke Rod
Part Name: Choke Rod Condition: good used/working shape Fits: Husqvarna 44 chainsaws
Husqvarna 394 Chainsaw Tank AV Spring Mount
Part Name: Tank AV Spring Mount 503 46 85-01 Condition: good used shape Fits: Husqvarna 394 chainsaws-Husky 395XP, 395 xp
(1 in stock)
Husqvarna 394 Chainsaw Throttle Cable
Part: throttle cable 503 52 04-02 Condition: good used shape Fits: Husqvarna 394 chainsaws-may also fit Husky 395 XP
Husqvarna K185 Choke Button 503 40 00-01 NEW
Part Number: 503 40 00-01 Part Description: choke button Fits the Following Models: Husqvarna K185, will also fit Partner models Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Partner Box 38
Husqvarna 61, 266, 268 Chainsaw Bumper dog type 1
Part Name: bumper dawg / plate and bolts Fits the Following Models: Husqvarna 61 266 268 This is a USED part, in good working order.
Husqvarna 570, 575 Chainsaw Throttle Trigger & Safety
Throttle Trigger & Safety Good used shape Fits: Husqvarna 575, 570
(3 in stock)
Husqvarna 44 444 Chainsaw Flywheel w/ Starter Pawls
Flywheel with starter pawls and springs. Fits Husqvarna 44 444 chainsaws. In good used shape with no cracks or broken fins. Flywheel has two key grooves. On Prufrex electronic ignition saws use the keyway marked P, on breaker-points ignition and bosch electronic igniton saws use the other keyway.