(1 in stock)
Partner 540 5100 Oil Drive Gear & Bracket 503 11 85-02
Part Number: 503 11 85-02 Part Description: drive gear and bracketFits the Following Models: Partner 540 5100, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 41
Partner 5000 Chainsaw Hand Guard 505 350432 NEW
Part Number: 505 35 04-32 Part Description: hand guard Fits the Following Models: Partner 5000 Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Box 43
(1 in stock)
Partner 500 5000 Chainsaw Throttle Rod 505 269440 NEW box 11
For Partner Models Part Number: 505 26 94-40 Part Description: throttle rod Fits the Following Models: Partner 5000 500, may also fit some other models Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.
(4 in stock)
Olympic Olympyk 264 F Chainsaw Choke Lever
Part Name: Olympic 264 F Chainsaw ChokePart Description: plastic choke control with shaftDetailed Condition Description: nice used shape, in good working orderFits the Following Models: 264 FThis is a USED part, in good working order.
Olympic Olympyk 251 Chainsaw Bar Stud 50-00086 NEW
Part: Bar Stud Part #: 50-00086 Fits: Olympic 251 Condition: new old stock part, never used Location: Box 5
Olympic Olympyk 251 Chainsaw Bar Adjusting Pin # 50-00097 NEW
Part: Bar Adjusting Pin Part #: 50-00097 Fits: Olympic 251-may also fit other models Condition: new old stock part, never used Location: Box 5
Olympic 261 Chainsaw Flywheel and Starter Pawls
Part Name: points type flywheel with starter pawls and one spring. 60.00144, 6000144, 006000144 Part Description: good used shape, no breaks Fits the Following Models: Olympic 261, 272, 260, 271, 281, 284, 480, 481, 482 older models equipped with points and condenser type ignition This is a u...
(3 in stock)
Olympic 251 252 Chainsaw Idle Speed Screw
Part: idle speed adjustment screw Condition: good used/working shape. Fits: Olympic / Olympyk251, 252
Olympic 240 Chainsaw Flywheel
Part: flywheel with starter pawls Condition: good used/working shape. No broken fins Fits: Olympic / Olympyk 240
(1 in stock)
McCulloch Titan 620 Chainsaw Clutch Spring
Part Name: clutch springCondition Description: in good used shape-no breaksFits the Following Models: McCulloch Titan 620This is a USED part, in good working order.
McCulloch Titan 620 Chainsaw Choke Rod Link
Part Name: choke rod Condition Description: in good used shape-no breaks Fits the Following Models: McCulloch Titan 620
McCulloch SP-80 SP80 Chainsaw Lower Mount Clamp +
Part Name: lower av buffer mount, bracket & hardware Condition: in good used/working shape Fits the Following Models: McCulloch SP 80, Super Pro 80
McCulloch sp 80 Chainsaw Fuel Tank Trigger Handle with the throttle trigger parts
Part Name: fuel tank trigger handle, includes the choke and link, throttle link, snubber, oil button, throttle latch, switch button and tirgger Condition: in good used/working shape Fits the Following Models: McCulloch SP-80 / Super Pro 80
McCulloch SP-80 SP80 Chainsaw Bottom Frame Brace
Part Name: frame brace bottom Condition Description: in good used/working hsape Fits the Following Models: McCulloch SP 80, Super Pro 80, SP-81, SP81
McCulloch SP-80, SP80 Chainsaw Bar Nut Set
Part Name: set of bar nuts Condition: in good used shape Fits the Following Models: McCulloch SP 80, Super Pro 80 and most other SP CP Pro Mac and 10-series mcculloch saws.
McCulloch SP-60 SP60 Chainsaw Handle Grip Insert
Part Name: handle grip insertCondition Description: in good used shape-no breaksFits the Following Models: McCulloch SP-60This is a USED part, in good working order.
McCulloch Pro Mac 850 Chainsaw Oil Cap
Part: oil cap Condition: good used/working shape. Minor chip/ding on top edge of cap Fits: McCulloch Pro Mac 850
McCulloch Pro Mac 805 Complete Starter/Recoil Cover
Part Name: starter cover with the spring, drum, shaft, sawdust guard, cover, pulley handleCondition Description: in good used shape-sawdust guard has several broken grills and there’s a ding on the bottom of the coverFits the Following Models: McCulloch Pro Mac 805This is a U...
McCulloch Pro Mac 805 Bottom Plate Frame Brace Shield
Part Name: frame brace shieldCondition Description: in good used shape-no breaks-chipping on upper corner edge, paint loss/scuffingFits the Following Models: McCulloch Pro Mac 805This is a USED part, in good working order.
McCulloch Pro Mac 805 Bottom Plate Frame Brace
Part Name: frame brace. Does NOT include hardware, bottom plate only Condition Description: in good used shape-no breaks-minor scuffing Fits the Following Models: McCulloch Pro Mac 805 This is a USED part, in good working order.
McCulloch Pro Mac 700 Chainsaw Oil Tank Cover
Part Name: oil tank cover, part # 86304- comes in black or yellow Condition: good used/working shape Fits the Following Models: McCulloch Pro Mac 700
McCulloch Pro Mac 610 650 605 3.7 Cylinder Cover 92004
Part: cylinder shroud cover. Black or yellow in color. Part # 92004 Condition: good used/working shape Fits: McCulloch Pro Mac 610, 605, 650, 3.7 Timber Bear
McCulloch Pro Mac 610, 605, 3.7 timber bear clutch Side Cover only
Part Name: Clutch sprocket cover, brake housing cover only-no internal parts. Type 1 (does not have opening above grilles). 216317 Detailed Condition Description: good used/working shape Fits the Following Models: Pro Mac 605, 610, 3.7 Timber Bear
McCulloch Pro Mac 55 Chainsaw Handle Brace 85007
Part: lower handle brace Condition: good use/working shape Fits: McCulloch Pro Mac 55
McCulloch Power Mac 6 Ignition Off Button Switch
Part Description:Ignition Off Button SwitchCondition:in good working shapeFits the Following Models: McCulloch Pro Mac 6This is a USED part, in good working order.
McCulloch Power Mac 6 Chainsaw Recoil Cover Screw/Clip
Part Description:recoil cover screw and clip Condition: good used shape Fits the Following Models: McCulloch Pro Mac 6 This is a USED part, in good working order.
McCulloch mac 32cc to 38cc (MS 1435, 1432 + others) Chainsaw right Rear Trigger Handle Body Case half Non spring mount type
Part Name: rear trigger handle half body case Condition Description: good used/working shape Fits the Following Models: McCulloch 32 to 38cc models such as MS 1435 35cc, MS 1432 32cc, 3214, 3216 and others which have Non spring mount type handle bars.
(1 in stock)
McCulloch Mac 110, 120, 130, eager beaver 2.0 Chainsaw Intake Manifold Inuslator
Part: intake manifold Condition: good used/working shape Fits: McCulloch Mac 110, 120, 130 and eager beaver 2.0
McCulloch Mac 10-10 Auto Chainsaw Flywheel & Pawls (points type)
Part Name: flywheel with starter pawls, springs and nut Part Description: good used shape, no breaks Fits the Following Models: McCulloch Mac 10-10 Auto
McCulloch Mac 10-10 black Air Filter Cover
Part: air filter cover. Writing is worn off on some. Condition: good used/working shape Fits: McCulloch Mac 10-10
McCulloch CP-55 CP55 Chainsaw Rear Handle Fuel Tank (bare bones)
Part Name: bare bones fuel tank trigger handle Condition Description: in good used shape-no breaks/leaks-some paint loss Fits the Following Models: McCulloch CP-55
McCulloch 7-10 Auto Chainsaw Crankcase Oil Tank & Bolts
Part Name: oil tank/crankcase with boltsCondition Description: in good used shape-no breaks-some scuffing/paint lossFits the Following Models: McCulloch 7-10
Lombard Comango, ap42, al42 Chainsaw Ignition Off Switch
Part: off switch Condition: good used, working shape Fits: Lombard Comango, AP 42, AL 42
(1 in stock)
Lombard Comango Chainsaw Bar Nuts
Part Name: (2) Bar Nuts Detailed Condition Description: nice used shape Fits the Following Models: comango and some other similar lombard models
Lombard Comango, AL 42, AP 42 + Chainsaw Oil Cap & O ring (metal)
Part: oil cap with O Ring Condition: good used, working shape Fits: Lombard Comango, AP42, AL42, Lightning Super Lightning and some other Lombard models
Jonsered M36 M-36 Shortblock-Piston-Cylinder-Crank
Complete shortblock assembly. This includes: Piston, Cylinder, rod, crank, bearings, bottom end. In good used shape. Good piston and cylinder not scored or cracked. Bottom end is tight without too much play. Fits jonsered M36.
(3 in stock)
Jonsered M-36 361 Chainsaw Fuel & Oil Cap Set
Part: fuel / gas and oil cap set Condition: good used, working shape Fits: M36 and 361, Jonsereds
Jonsered M-36 361 365 Chainsaw Air Filter
Air filter. In good used shape, not clogged or ripped. Fits jonsered M36 361 and 365.
Jonsered 90 Chainsaw Air Filter used #1
Part Description: air filter Fits the Following Models: 90 Detailed Condition Description: useable shape-has been patched as visible in the picture
Jonsered Jonsereds 80 Chainsaw Oil Pump Oiler
Automatic Oiler Oil pump only. 504 81 16-01, 504811601, 504 811601 In good working order. Fits jonsereds 80 801 90 and others
(4 in stock)
Jonsered 625, 630, 670 Chainsaw Clutch Rim sprocket only (no rim) #1
Part Name: rim drum/sprocket Part Description: good used/working shape Fits the Following Models: some models of Jonsereds 625, 630, 670
Jonsered 625, 630, 670 Throttle Safety Latch
Trigger Safety release lever. Fits Jonsered 626, 630, 670. Part # 501 77 33-01. Good used shape with no breaks.
Jonsered Jonsereds 49sp, 50, 51 Chainsaw red Air Box
Air box. In good used shape with no breaks, has some paint loss-some are red in color and some are black in color. Fits Jonsered 49 SP, 50, 51 may also fit some other models. PN 504 60 20-09
(3 in stock)
Jonsered Jonsereds 361 Chainsaw Cylinder
Part Name: clyinderPart Description: In good used shape, no breaks-not scoredFits the Following Models: Jonsered 361
Jonsered 910 E EV Chainsaw Throttle Lock and spring
Part Name: throttle lock. PN 504 38 66-01 Condition Description: in good used shape-no breaks Fits the Following Models: Jonsered 910e, 910ev
Jonsered 621, 80 Chainsaw Filter mount
Part: filter mount. Part # 504 35 77-01 Condition: good used/working shape Fits: Jonsered 621, 80
Jonsered 525 535 Chainsaw Throttle Link
Part Name: throttle linkCondition Description: in good used shape-no breaksFits the Following Models: Jonsered 525 535
(1 in stock)
Jonsered 521E 521 E Chainsaw Flywheel w/Starter Pawls
Part Description: flywheel with starter pawls and springsDetailed Condition Description: good used shape, no breaksFits the Following Models: 521E
(2 in stock)
Jonsered 520 SP Chainsaw Crankshaft, Crank Rod Bearings #1
Part: crank shaft with connecting rod and bearings Condition: good used/working shape Fits: Jonsered 520sp
Jonsered 52 E, 521 ev Chainsaw black Top Cover -- Engine Shroud
Part: top cover shroud Condition: good used/working shape Fits: Jonsered 52E, 521EV
Jonsered 510 SP Chainsaw Clutch Cover Hand Guard #3
Part Name: Clutch cover with hand guard. This is a stationary hand guard, there is no provision inside the clutch cover for a chainbrake. This is used on older 510SPPart Description: In good solid shape, not cracked broken or melted.Fits the Following Models: Jonsered 510 SP
(2 in stock)
Jonsered 510 SP Chainsaw crankcase tank assembly
Part: crank case tank assembly Condition: good used / working shape, no breaks Fits: Jonsered 510sp
Jonsered 49sp to 52e Chainsaw Right Trigger Handle Half
Part Name: right rear trigger handle housing half. Part # 504 65 55-00 Conidtion: good used/working shape Fits the Following Models: Jonsered 49sp, 50, 51, 52, 52E
Jonsered 49sp, 50, 51, 52, 52e Chainsaw rear handle bottom half (right side)
Part Name: Lower right handle half for the rear handle. part # 504 65 57-04 Part Description: Good used/working shape Fits the Following Models: Jonsered 49 sp, 50, 51, 52, 52E
Jonsered 49SP 50 51 52 carburetor bolt set and plate
Carburetor bolts with plate, part # 725 23 41-85 and 504 35 76-01 Fits 49SP 50, 51, 52 52E and 521 jonsered models
Jonsered 49SP to 52 series Starter recoil cover only
Part: starter housing cover only Condition: good used/working shape. Faded. Fits: Jonsered 49 sp, 50, 51, 52, 52e
Jonsered 451 E Chainsaw Brake Mechanism
Part Name: Brake mechanismDetailed Condition Description: good working shapeFits the Following Models: Jonsered 451 EThis is a USED part, in good working order.
Jonsered 370 Chainsaw Ignition Coil
Electronic Ignition coil. 507 43 33-68, 507 433368 Tested working good. Fits jonsered 370 and Husqvarna
Jonsered m-36 Chainsaw Ignition Coil for Points
Part: coil for points Condition: good used shape, tested and works Fits: Jonserds M36
(3 in stock)
Jonsered m36, 361 Chainsaw Trigger Handle Cover
Part: trigger handle cover Part Number: M-101055, M101055 Condition: good used, working shape Fits: Jonsered M36, 361
Jonsered 2171 Turbo Chainsaw Carburetor Housing
Carburetor carb Housing filter base / mount. Part number 503 62 73-04, 503 62 73 04 Good used/working shape Fits Jonsered 2171, 2165, 2163, 2071, 2065, 2063 Turbo
(1 in stock)
Jonsered 2051 Starter Pawl Assyembly PN 503-484901 (H-56)
For Jonsered ChainsawsPart Name: Jonsered 2051 Starter Pawl AssebmlyPart Number:503-484901Detailed Condition Description: New old stock part. Never used, a little bit of light surface rust from storage.
Jonsered 2040 2036 Turbo Chainsaw Bar Tensioner/Adjuster
Part: bar/chain tensioner Condition: good used/working shape Fits: Jonsered 2036, 2040
Jonsered 2040 Turbo Chainsaw Air Filter Assembly
Part Name: filter assembly Detailed Condition Description: good used shape with no breaks Fits the Following Models: Jonsered 2040 Turbo This is a USED part, in good working order.
(1 in stock)
Jonsered 2036 Turbo Chainsaw Recoil Starter Cover Only
Part: starter housing cover Condition: good used/working shape Fits: Jonsered 2036
(3 in stock)
Husqvarna Practica 40 Chainsaw clutch assembly
Part: clutch sprocket drum and mechanism Part Description: - In good working order Fits the Following Models: – Husqvarna Practica 40. And some other older models like 140s, 240, etc.
(4 in stock)
Husqvarna 61 Chainsaw Muffler only for spark arrestor
Part: muffler only equipped with opening for spark arrestor Condition: good used/working shape. Minor denting. Fits: some models of Husqvarna 61
Husqvarna 50, 51, 55 Chainsaw Inner Guide Plate
Inner oil guide bar plate, oil pump cover. Part number 501 76 32-01 In good used shape Fits: Husqvarna 50, 51, 55 rancher Chainsaw
Husqvarna 444 44 140 Bar & Chain Tensioner/Adjuster
<FONT face=Arial size=4>Part Name: bar & chain tensioner/adjuster <FONT face=Arial size=4>Fits the Following Models: husqvarna 44 444 140 <FONT face=Arial size=4>This is a USED part, in good working order.
(3 in stock)
Husqvarna 42 Special Chainsaw filter mount
Part: air filter mount connector Part # 503 15 22-02 Condition: good used/working shape Fits: Husqvarna 42 special 242 242xp 246
Husqvarna 42 Special Chainsaw Intake Manifold
Part Name: intake manifold Condition Description: in good used shape-no breaks Fits the Following Models: Husqvarna 42 Special 242 242xp 246 This is a USED part, in good working order.
(1 in stock)
Husqvarna 42 Special Chainsaw chainTensioner
Part Name: chain tensioning screw and bar adjusting pin. Part # 501 54 63-01, 501 45 41-01 Condition: good used/working shape Fits the Following Models: Husqvarna 42 Special , 246
(1 in stock)
Husqvarna 40 45 Chainsaw Muffler
Part Name: Muffler and bracket, no boltsDetailed Condition Description: good used condition with no breaks, minor surface rust and dentFits the Following Models: Husqvarna 40 45This is a USED part, in good working order.
Husqvarna 40 45 Chainsaw Gas/Fuel & Oil Cap Set
Part Name: Fuel & Oil Cap Set Detailed Condition Description: good used condition, not cracked and don’t leak. Caps do NOT have a keepers, there is minor gouging around slot Fits the Following Models: Husqvarna 40 45 This is a USED part, in good working order.
Husqvarna 371 372 XP Chainsaw Top Cylinder Cover #1
Part: Top Cover Part Description: In good used shape, small hairline cracks on the front corners. Fits the Following Models: Husqvarna 371 372
Husqvarna 36, 41 Chainsaw carb adaptor base
Part Name: carb adaptor/ manifold base mount. part # 530-037465 Fits the Following Models: Husqvarna 36, 41 This is a USED part, in good working order.
Husqvarna 359, 357 xp Chainsaw Choke Rod rod used
Part Name: choke rod. Part # 503 92 25-01 Condition Description: in good used/working shape Fits the Following Models: Husqvarna 359xp, 357xp
(3 in stock)
Husqvarna 350 Chainsaw Crankshaft, Rod, Base
Part Name: crankshaft, rod, bearings, base. Part #s 503 88 59-01 and 503 85 80-71 Fits the Following Models: Husqvarna 350 This is a USED part, in good working order.
Husqvarna 340, 345, 350 Chainsaw Carb support 503 86 64-01
Part Name: carburetor support mount, part # 503 86 64-01 Fits the Following Models: Husqvarna 340, 345, 350 This is a USED part, in good working order.
Husqvarna 262XP, 254 oil pickup line and filter
Oil line that mounts under the oil pump. Includes the filter on the end. Fits Husqvarna 262 xp, 254
Husqvarna 257 XP Chainsaw Walbro Carb Carburetor +
Part Name: walbro carburetor with the bolt and mountCondition Description: in good physical condition, may or may not need a carb rebuild kitFits the Following Models: Husqvarna 257 XPThis is a USED part, in good working order.
(1 in stock)
Husqvarna 254, 257, 262, 261 Chainsaw Brake Dust Cover
Part Name: brake cover in used/working shape 501 87 50-01 Fits the Following Models: 254, 257, 261, 262, 262xp
Husqvarna 142 Chainsaw Gas/Fuel Cap
Part Name: fuel capCondition Description: in good used shape-not cracked/doesn’t leakFits the Following Models: Husqvarna 142This is a USED part, in good working order.
Homelite 1050, 1130Chainsaw Retainer Washer # 58763 NEW (bin 104)
Washer. 58763 new part from old dealer stock Fits the Following Models: xl98a, xl98c, xl98e, xl98d 8800, 880hg, mp88, dm54, super xl ao, xl12, 410, 410sl, dm40, dm401, 540, super1050, super 1130g, super xl925, super xl925w
Homelite XL-800 XL-700 Blue starter recoil cover and pulley assembly
Part Name: blue starter housing cover with pulley, rewind spring and grip Condition: good used/working shape Fits the Following Models: Homelite XL 700 XL 800 XL700 XL800 and others
Homelite XL-700 XL-800 Blue Rear Trigger Handle Air Box
Part Name: Trigger Rear Handle Air Box Part Description: rear handle that extends to include the air box, also includes the throttle link and triggerDetailed Condition Description: good used shape with no cracks or breaks, paint scuffed offFits the Following Models: xl700, xl800This is a USED par...
Homelite XL,180 + Chainsaw Air Filter Box 02491A NEW
For Homelite ChainsawsPart Number: 02491APart Description: air filter boxFits the Following Models: xl, little red, 180, 192, 200, super 2, super 2 sl, super 2 xlDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: box 3
Homelite XL 901 921 800 C-52 + Clutch Shoe PN 64569 NEW (bin 20)
For Homelite ChainsawsPart Name: homelite chainsaw clutch shoePart Number: 64569Part Description: shoe-clutchFits the Following Models: xl 901/903/904, xl 921, c-52, xl 700/800, may also fit other homelite modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty ...
Homelite XL-101, xl-102 Chainsaw Air Filter
Part: air filter Condition: used/working shape Fits: Homelite XL 101 & XL 102
Homelite Xl 101 102 103 Flywheel Screen PN 63219 NEW
For Homelite ChainsawsPart Name: homelite flywheel screenPart Number: 63219Part Description: screen-rotorFits the Following Models: xl 101, 102, 103, 104, may also fit other homelite modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty fro...
Homelite Trimmer/Blower + Dam Gasket 06900A/07615 NEW (bin 108)
For Homelite Trimmers/Pumps/Blowers Part Number: 06900a/07615 Part Description: heat dam gasket Fits the Following Models: d25mhv, hb25255V, i25mhv, vac attack, ap125, bc1600, c1200, d725cd, easy reach, easy trim, expand-it, hbc30bi, k200, k300, ry70101 and more models Detailed Condition De...
Homelite Trimmer Muffler Assembly PN A07142A NEW
For Homelite TrimmersPart Number: A07142APart Description: muffler assembly with bolts & gasketsFits the Following Models: st635cc, st725cc, bc1725sbr, d725cd, easy reach, easytrim, expandit, phantom ss, st155i, st155v, st2527rb, trim n’edge, trimlite, versatool, touchstartDe...
Homelite Super EZ Chainsaw Oil Line and Valve
Part Name: oil line, valve Part # A-65214 / A65214 Fits the Following Models: Homelite Super EZ This is a USED part, in good working order.
Homelitexl-12 Chainsaw Spring 59293 NEW (bin 9)
Homelite spring, Part # 59293 New old stock part from closed out dealer Fits the Following Models: super 1050, Super xl ao, super xl 925, super xl 925w, super 1130g, xl 12, may also fit other homelite modes
Homelite Chainsaw Gasket PN 63237 NEW (hm11)
For Homelite ChainsawsPart Number: 63237Part Description: gasketFits the Following Models: fits some models of homelite chainsawsDetailed Condition Description: New old stock part. Never used. Item may be dusty from 30 years of storage.Location: box 11
Homelite Chainsaw 360 Auto O Ring 12095 NEW (bin 26)
O Ring, part # 12095 New old stock part from closed out dealer Fits Homelite 360 chainsaw models Box 26
Homelite Blower/String Trimmer Carburetor Gasket 987661
For Homelite Blowers & String TrimmersPart Number: 987661Part Description: carburetor gasketFits the Following Models: blowers: pbp3000, phb3000, backpacker, bandit 2000, bp250(1), bp25175, d25b, d25mha, yard broom, yard sweeperString trimmers: i625cd, i630cd, i725cc, i730ca, i730cc...
Homelite 540 + Chainsaw Inlet Needle Valve PN 97942 NEW (bin 4)
For Homelite ChainsawsPart Number: 97942Part Description: inlet needle valveFits the Following Models: 540, dm54, xl98d, super xl ao, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Box: 4
Homelite 410 Chainsaw Isolator/ AV Buffer Mount # 93368
Part Name: Isolator/ AV Buffer Mount Condition: good used/working order Part Number: 93368 Fits the Following Models: 410