(3 in stock)
Husqvarna Practica 40 Chainsaw clutch assembly
Part: clutch sprocket drum and mechanism Part Description: - In good working order Fits the Following Models: – Husqvarna Practica 40. And some other older models like 140s, 240, etc.
(4 in stock)
Husqvarna 61 Chainsaw Muffler only for spark arrestor
Part: muffler only equipped with opening for spark arrestor Condition: good used/working shape. Minor denting. Fits: some models of Husqvarna 61
Husqvarna 50, 51, 55 Chainsaw Inner Guide Plate
Inner oil guide bar plate, oil pump cover. Part number 501 76 32-01 In good used shape Fits: Husqvarna 50, 51, 55 rancher Chainsaw
Husqvarna 50, 51, 55 Bar Stud / bolt set
Part: bar bolt set Condition: good used/working shape Fits: Husqvarna 50, 51, 55
Husqvarna 444 44 140 Bar & Chain Tensioner/Adjuster
<FONT face=Arial size=4>Part Name: bar & chain tensioner/adjuster <FONT face=Arial size=4>Fits the Following Models: husqvarna 44 444 140 <FONT face=Arial size=4>This is a USED part, in good working order.
(3 in stock)
Husqvarna 42 Special Chainsaw filter mount
Part: air filter mount connector Part # 503 15 22-02 Condition: good used/working shape Fits: Husqvarna 42 special 242 242xp 246
Husqvarna 42 Special Chainsaw Intake Manifold
Part Name: intake manifold Condition Description: in good used shape-no breaks Fits the Following Models: Husqvarna 42 Special 242 242xp 246 This is a USED part, in good working order.
(1 in stock)
Husqvarna 42 Special Chainsaw chainTensioner
Part Name: chain tensioning screw and bar adjusting pin. Part # 501 54 63-01, 501 45 41-01 Condition: good used/working shape Fits the Following Models: Husqvarna 42 Special , 246
(1 in stock)
Husqvarna 40 45 Chainsaw Muffler
Part Name: Muffler and bracket, no boltsDetailed Condition Description: good used condition with no breaks, minor surface rust and dentFits the Following Models: Husqvarna 40 45This is a USED part, in good working order.
Husqvarna 40 45 Chainsaw Gas/Fuel & Oil Cap Set
Part Name: Fuel & Oil Cap Set Detailed Condition Description: good used condition, not cracked and don’t leak. Caps do NOT have a keepers, there is minor gouging around slot Fits the Following Models: Husqvarna 40 45 This is a USED part, in good working order.
Husqvarna 371 372 XP Chainsaw Top Cylinder Cover #1
Part: Top Cover Part Description: In good used shape, small hairline cracks on the front corners. Fits the Following Models: Husqvarna 371 372
Husqvarna 359, 357 xp Chainsaw Choke Rod rod used
Part Name: choke rod. Part # 503 92 25-01 Condition Description: in good used/working shape Fits the Following Models: Husqvarna 359xp, 357xp
(3 in stock)
Husqvarna 350 Chainsaw Crankshaft, Rod, Base
Part Name: crankshaft, rod, bearings, base. Part #s 503 88 59-01 and 503 85 80-71 Fits the Following Models: Husqvarna 350 This is a USED part, in good working order.
Husqvarna 340, 345, 350 Chainsaw Carb support 503 86 64-01
Part Name: carburetor support mount, part # 503 86 64-01 Fits the Following Models: Husqvarna 340, 345, 350 This is a USED part, in good working order.
Husqvarna 257 XP Chainsaw Walbro Carb Carburetor +
Part Name: walbro carburetor with the bolt and mountCondition Description: in good physical condition, may or may not need a carb rebuild kitFits the Following Models: Husqvarna 257 XPThis is a USED part, in good working order.
Husqvarna 142 Chainsaw Gas/Fuel Cap
Part Name: fuel capCondition Description: in good used shape-not cracked/doesn’t leakFits the Following Models: Husqvarna 142This is a USED part, in good working order.
Homelite 1050, 1130Chainsaw Retainer Washer # 58763 NEW (bin 104)
Washer. 58763 new part from old dealer stock Fits the Following Models: xl98a, xl98c, xl98e, xl98d 8800, 880hg, mp88, dm54, super xl ao, xl12, 410, 410sl, dm40, dm401, 540, super1050, super 1130g, super xl925, super xl925w
Homelite XL-700 XL-800 Blue Rear Trigger Handle Air Box
Part Name: Trigger Rear Handle Air Box Part Description: rear handle that extends to include the air box, also includes the throttle link and triggerDetailed Condition Description: good used shape with no cracks or breaks, paint scuffed offFits the Following Models: xl700, xl800This is a USED par...
Homelite XL,180 + Chainsaw Air Filter Box 02491A NEW
For Homelite ChainsawsPart Number: 02491APart Description: air filter boxFits the Following Models: xl, little red, 180, 192, 200, super 2, super 2 sl, super 2 xlDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: box 3
Homelite XL 901 921 800 C-52 + Clutch Shoe PN 64569 NEW (bin 20)
For Homelite ChainsawsPart Name: homelite chainsaw clutch shoePart Number: 64569Part Description: shoe-clutchFits the Following Models: xl 901/903/904, xl 921, c-52, xl 700/800, may also fit other homelite modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty ...
Homelite XL-101, xl-102 Chainsaw Air Filter
Part: air filter Condition: used/working shape Fits: Homelite XL 101 & XL 102
Homelite Xl 101 102 103 Flywheel Screen PN 63219 NEW
For Homelite ChainsawsPart Name: homelite flywheel screenPart Number: 63219Part Description: screen-rotorFits the Following Models: xl 101, 102, 103, 104, may also fit other homelite modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty fro...
Homelite Trimmer/Blower + Dam Gasket 06900A/07615 NEW (bin 108)
For Homelite Trimmers/Pumps/Blowers Part Number: 06900a/07615 Part Description: heat dam gasket Fits the Following Models: d25mhv, hb25255V, i25mhv, vac attack, ap125, bc1600, c1200, d725cd, easy reach, easy trim, expand-it, hbc30bi, k200, k300, ry70101 and more models Detailed Condition De...
Homelite Trimmer Muffler Assembly PN A07142A NEW
For Homelite TrimmersPart Number: A07142APart Description: muffler assembly with bolts & gasketsFits the Following Models: st635cc, st725cc, bc1725sbr, d725cd, easy reach, easytrim, expandit, phantom ss, st155i, st155v, st2527rb, trim n’edge, trimlite, versatool, touchstartDe...
(3 in stock)
Homelite Super XL 12 + Chainsaw Pawl Stud PN 58757E NEW (bin 105)
For Homelite ChainsawsPart Number: 58757ePart Description: starter pawl studFits the Following Models: super xl925, super xl925w, dm40, dm401, super xl ao, xl 12, xl98a, xl98c, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from year...
Homelite Super EZ Chainsaw Oil Line and Valve
Part Name: oil line, valve Part # A-65214 / A65214 Fits the Following Models: Homelite Super EZ This is a USED part, in good working order.
Homelite ST155 GST18 +Trimmer Rubber Bumper 98792 NEW (HM-10)
For Homelite ModelsPart Number: 98792Part Description: rubber bumperFits the Following Models: ry30000, ry30000a, ry3004, ry7011, ry70107, ry52004, bc3000, gst18, gstbc, hbc18, hbc28, hbc30, hlt15, hlt16, hlt18, hlt28, st155, st175, st275, st385bc, sx135, ap125 and other modelsDetailed Condition...
Homelite Blower/String Trimmer Carburetor Gasket 987661
For Homelite Blowers & String TrimmersPart Number: 987661Part Description: carburetor gasketFits the Following Models: blowers: pbp3000, phb3000, backpacker, bandit 2000, bp250(1), bp25175, d25b, d25mha, yard broom, yard sweeperString trimmers: i625cd, i630cd, i725cc, i730ca, i730cc...
Homelite 540 + Chainsaw Inlet Needle Valve PN 97942 NEW (bin 4)
For Homelite ChainsawsPart Number: 97942Part Description: inlet needle valveFits the Following Models: 540, dm54, xl98d, super xl ao, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Box: 4
Homelite 410 Chainsaw Isolator/ AV Buffer Mount # 93368
Part Name: Isolator/ AV Buffer Mount Condition: good used/working order Part Number: 93368 Fits the Following Models: 410
Homelite 360 Chainsaw Starter Cover Emblem Decal
Part: starter housing cover Condition: good used/working shape-decal may vary in cosmetic design Fits: Homelite 360
Homelite 330 Shortblock - piston, cylinder, crankshaft +
Part: shortblock, includes the piston, cylinder, crank shaft, connecting rod, crankcase Part #s a-95884-a, a-95882-a, a-96418-b, 93859 Condition: good used/working shape, came off a saw with good compression. Condition of seals and bearings is unknown Fits: Homelite 330
Homelite 290, 340 Chainsaw Ignition Off Switch assembly
Part: on/off switch assembly Condition: good used/working shape Fits: Homelite 290, 340
(2 in stock)
Homelite 290, 340 Chainsaw Bumper Plate
Part: bumper plate Condition: good used/working shape Fits: Homelite 290, 340 Part Number: PN 98294
(3 in stock)
Homelite 150 Chainsaw Ground Switch Contact # 68577 NEW (bin 103)
For Homelite ChainsawsPart Number: 68577Part Description: ground contact switchFits the Following Models: 105, 150e, 150wDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Box: 103
Efco 952, 947 Chainsaw Ignition Coil
Part Name: ignition coilCondition Description: in good used shape-tested and worksFits the Following Models: Efco 952 and Efco 947This is a USED part, in good working order.
Efco 952 Chainsaw .325-7 Rim Drum Clutch Assemlby
Part Name: .325-7 rim drum clutch assembly-includes the drum, rim, bearing and washer. 50080023, 005000165, 094500297R Condition Description: in good used shape-no breaks Fits the Following Models: Efco 952 947 152 147 This is a USED part, in good working order.
Efco 947 Chainsaw Spur Drum Clutch Assembly
Part Name: spur drum clutch-includes the drum, mechansim, bearing and washerCondition Description: in good used shape-no breaksFits the Following Models: Efco 947This is a USED part, in good working order.
Efco 947 Chainsaw Crankcase Tank & Crankshaft, Rod
Part Name: crankcase/tank with the crankshaft, rod,studsCondition Description: in good used shape-no breaks or leakFits the Following Models: Efco 947This is a USED part, in good working order.
Echo CS-60S 60 S Chainsaw Oil Cap
Part Name: Oil CapFits the Following Models: Echo 60SThis is a USED part, in good working order.
Echo CS-601S 601 S Chainsaw Rear Trigger Handle
Part Name: rear trigger handle with gripping-handle only-does NOT include trigger etc.Condition: good used shape with no breaks-has a minor chip on top front edgeFits the Following Models: Echo CS-601SThis is a USED part, in good working order.
Echo CS-601S 601 S Chainsaw Inner & Outer Bar Plate Set
Part Name: inner and outer bar plate setCondition: a few gouges on the edges, good useable shapeFits the Following Models: Echo CS-601SThis is a USED part, in good working order.
Echo CS-315 Chainsaw Oil Pump/Oiler
Oil pump. In good working order. Fits echo 315.
Echo CS 302 Chainsaw Clutch Mechanism
Part Name: Clutch Mechanism 175 000-0393 0, 17500003930Detailed Condition Description: nice used shape with no breaksFits the Following Models: CS302
Echo 452 VL 452VL Chainsaw Tank Fitting
Fuel pipe connector tank fitting. In good used shape. Fits Echo 452 VL. Part number 132 011-0283 2, 13201102832
(4 in stock)
Echo cs-452vl Chainsaw Bar Nut Set
Part: set of bar nuts Condition: Good used/working shape Fits: Echo CS 452 vl
(4 in stock)
Echo cs-451vl starter recoil cover and pulley assembly
Part: starter housing cover with pulley drum and rewind spring, does NOT have a usable grip Condition: good used, working shape Fits: Echo CS 451 vl
Echo 451VL 451 VL Chainsaw Piston & Cylinder Assembly
Part Description: piston, cylinder, rings, bearing and pin. Condition: good used shape with no cracks or breaks, good compression and no scoringFits Models: Echo 451 VL
Echo cs-451vl, cs-452vl Chainsaw Starter Pawl and Spring Set
Part: set of 2 starter pawls / ratchet (177 218-0283 0) and springs Condition: good used/working shape Fits: Echo CS 451 vl, CS 452 VL, 750 EVL
Echo cs 451 452 VL Chainsaw Clutch Mechanism
Part: clutch mechanism Condition: good used, working shape Fits: Echo CS-451vl and CS-452vl
Dolmar PS-9000 PS-9010 Chainsaw Bushing 965401016 NEW (bin 119)
Part Number: 965401016Part Description: bushingFits the Following Models: Dolmar PS-9000 PS-9010, may also fit other modelsCondition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 119
Dolmar 100, 100 super, 102 chainsaw Oil Pump/Oiler assembly
Part: oil pump, oil pick up line Condition: good used/working shape Fits: Dolmar 100, 100 super, 102
(2 in stock)
Dolmar 123 Chainsaw Air Filter Cover Hood
Part Name: air filter cover hood. Part # 123 118 021 Condition Description: in good used shape-no breaks Fits the Following Models: Dolmar 123
Dolmar 122 Chainsaw Gasket 965 518 020 NEW
Part Number: 965518020, 965180010, 965 180 010 Part Description: gasket Fits the Following Models: Dolmar 122 , may also fit other models Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Box 120
Dolmar 120s Chainsaw Throttle Link with guide
Part Name: throttle link Detailed Condition Description: good used shape Fits the Following Models: Dolmar 120S
(1 in stock)
Dolmar 116si 120si 6000i 6800i Muffler Washer 928406000 (bin 24)
For Dolmar ModelsPart Number: 928406000Part Description: muffler washerFits the Following Models: Dolmar 116si 120si 6000i 6800i Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 24
Dolmar 112, 114 Chainsaw Intake Manifold flange
Part: intake manifold / intermediate flange, part # 112 131 020 Condition: good used working shape Fits: Dolmar 112, 114 and some other models
(1 in stock)
Dolmar 112 114 117 119 120 Gasket Bushing 965402931 NEW
Part Number: 965402931Part Description: gasket/bushingFits the Following Models: Dolmar 112 114 117 119 120, may also fit other modelsCondition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 119
Dolmar 111i 111 i Chainsaw Mount Screw
Part Name: mount screwDetailed Condition Description: good used shape Fits the Following Models: Dolmar 111i
Dolmar 109 Chainsaw Complete Spur Clutch Assembly
Part Name: Complete Spur Clutch Assembly-includes the drum, clutch mechanism, bearing, washer. .325 x 8 tooth Detailed Condition Description: good used shape, no breaks Fits the Following Models: Dolmar 109, 110, 111, 115 and others
Dolmar 105 Chainsaw Chainbrake Brake Handle kit
Part Name: Chainbrake, includes the brake handle, brake band, spring, linkages, etc. Detailed Condition Description: good working used/working shape Fits the Following Models: Dolmar 105
Dolmar 105 Chainsaw Air Filter Cover with Knob
Part Name: air filter cover with knobDetailed Condition Description: good used shape, no breaks or cracksFits the Following Models: Dolmar 105
Dolmar 100 Chainsaw Piston & Cylinder Assembly
Part Name: piston, cylinder, ring and pin Detailed Condition Description: good used/working order. Came off a saw with good compression. Fits the Following Models: Dolmar 100
(2 in stock)
jonsered 630, 670 chainsaw air filter nylon new OEM 501 77 38 (JNAAB)
Part: nylon air filter Condition: New old stock from closed out dealer. Will be dusty/dirty from years of storage. Fits: Jonsereds 630, 670 and some other models. Note that there are several types of air filters for these saws so make sure this is the style you need prior to placing order.
husqvarna 570, 575xp chainsaw air filter new oem 537 20 66 (H-1001)
Part: non HD nylon air filter. May be black or yellow. Part # 537 20 66 Condition: new old stock from closed out dealer. may be dusty from years of storage. Fits: Husqvarna 570, 575 xp
(3 in stock)
Husqvarna 372 chainsaw starter pulley New OEM 503 85 96-01 (HVB 1)
Starter recoil rewind pulley. Part number 503859601 New old stock from closed out dealer. Fits Husqvarna 362, 365, 371 XP, 372 XP, 371XP, 372XP, 385xp, 385. Jonsered 2063, 2065, 2071, 2163, 2165, 2171, 2186 turbo and others
(2 in stock)
jonsered 2071, 2171, 2063, 2163, turbo chainsaw choke rod pn 503 70 51-01 New OEM (H58)
Part: choke rod, part # 503 70 51 01 Condition: new old stock from closed out dealer. Fits: Jonsered 2071, 2171, 2063, 2163 2165, 2065 Turbo
oem husqvarna & jonsered chainsaw fuel line 503 57 76-01 (wall)
Part: fuel hose line. Part # 591375201, 503 57 76 01 Condition: new, genuine oem Fits: Husqvarna 346, 350, 372, 394, 3120, 268, 353, 357, 359, 362, 365, 371, 385, 395, 340, 345. Jonsered 2149, 2150, 2151, 2152, 2159, 2071, 2063, 2165, 2171 Turbo. Location: wall
Husqvarna 346 XP Chainsaw Guide Bar Plate new 537 40 56-01 (H-14)
Oil guide cover bar plate. Pn 537405601 new old stock from closed out dealer. Fits Husqvarna 346xp, 353, 351. Jonsered 2149 2152 2153 Turbo
Husqvarna 372 X-Torq Chainsaw Air Filter Mount new 515 98 29-01 (H-14)
Air horn intake 515 98 29-01 new old stock from closed out dealer. Fits Husqvarna 372xp 365 X-Torq, Jonsered 2166 2172
Husqvarna 266 XP chainsaw cylinder
Cylinder 50mm bore Mahle. 50ZN13 501 68 55-71 In good used shape. Fits Husqvarna 266, 66, 266 SE SG XP, 266SE, 266XP
husqvarna 285, 2101, 2100 chainsaw crankcase gasket new 501 29 06-01 (upstairs)
Part: crank case gasket Part # 501290601 Condition: new old stock from closed out dealer. May be a little dirty/have some oil on it from years of storage. Fits: Husqvarna 2100, 2101, 285
Stihl 044 - MS461 Chainsaw Intake Manifold Boot 1128 141 2203 NEW OEM (ST204B)
Intake manifold boot. 11281412203 1128-141-2203 new old stock from closed out dealer. Fits: Stihl 044 046 AV 044av 046av MS440 MS460 MS 440 460 461 MS461 Magnum
(1 in stock)
stihl ms441 chainsaw top cover shroud #1
Part: top cover engine shroud Part # 1138 084 0900 Condition: good used/working shape with no breaks. includes top cover screw Fits: Stihl MS 441
Jonsered 670 chainsaw cylinder (with boot type intake) new Mahle (upstairs)
Part: 50mm bore cylinder 503 17 29-04 Condition: new old stock from closed out dealer. Fits: Jonsered 670 and 625 models which have boot type intake
Husqvarna 357 chainsaw intake connector spacer 503 92 85-02 new oem (H-48)
Part: intake connector spacer flange Part # 503 92 85-01 Condition: New old stock from closed out dealer. Fits: Jonsered 2159 turbo Husqvarna 357 359
Jonsered 2149 2152 Chainsaw top cover 537 03 32-04 new OEM (JN-AAB)
Snap on style top cover. Jonsered part number 537 03 32-04 New old stock from closed out dealer. Fits 2149 2152 Turbo older models without fuel primer
Jonsered 2071 Turbo Chainsaw ID Tag Decal 503-705801 (H-10)
ID tag decal sticker 503705801 503 70 58 01 new old stock from closed out dealer Jonsered 2071 Turbo
husqvarna 36, 41 chainsaw carb gasket 530 01 91-72 new (H-10)
Part: carburetor gasket Condition: good used/working shape Fits: Husqvarna 36, 41, 136 LE, 136, 137 (EXPORT), 137 (NORTH AMERICA), 137 E, 137, 141 LE, 141, 142 (EXPORT), 142 (NORTH AMERICA), 142 E, 142, 36, 41
husqvarna 371, 372 chainsaw cylinder gasket new OEM 503 96 15-01 (upstairs)
Part: cylinder base gasket Part #: 503961501 503 96 15-01 Condition: New old stock from closed out dealer. Fits: Husqvarna 371, 372 Location: upstairs
(1 in stock)
jonsered 920 chainsaw air filter cover and nut new OEM (Jons bulky)
Part: air filter cover and nut 504 02 47-08 504 60 20-48 Condition: New old stock from closed out dealer. Dusty from years of storage. Fits: Jonsereds 920
husqvarna 40, 45 chainsaw av spring mount strap 503 11 92-02 new (H-7)
Part: av spring mount tie strap Condition: new oem old stock from closed out dealer. Fits: Husqvarna 40, 45, 49
(1 in stock)
husqvarna 570, 575, 372, 371 + others chainsaw fuel / oil cap newOEM part # 537 21 52-02 (A1101)
Part: replacement fuel gas and/or oil cap OEM Part # 537 21 52 02 Condition: New old stock from closed out dealer. Fits: Husqvarna 3120, 334, 336, 338, 339, 340, 345, 346, 350, 353, 357, 359, 362, 362, 371, 372, 55, 570, 575xp, 576xp, 372xp, 357xp, 346xp and many others.
Husqvarna 50 Chainsaw Chain Brake Handle New Oem 503 12 36-01 NEW (HAB3)
Hand Guard, chainbrake actuator handle. Husqvarna part number 503123601 New OEM part from closed out dealer. Dusty from years of storage. Fits: some models of Husqvarna 50 and 50 Rancher
(1 in stock)
Husqvarna 254, 154 Chainsaw Top Cylinder Cover/Shroud 501 86 95 new OEM (HAB1)
Part: top cover 501 86 95-08 5018696 Condition: New old stock from closed out dealer. Fits: Husqvarna 254
Husqvarna 394 Chainsaw Low Air Filter Cover new 503 52 65-01 OEM NOS (HAB1)
Low rise standard air filter cover 503526501 superseded to 503 52 65-02 New old stock from closed out dealer. May have some scuffs and be dusty/dirty from years of storage. Fits 394xp, 394 xp with the low air filter
(1 in stock)
husqvarna 455 rancher, 460 chainsaw clutch cover with brake new OEM 537 28 63-01 (H1001)
Part: chainbrake, clutch sprocket cover with brake band, spring, cover, chain tensioner adjuster. Part # 537286301 Condition: New OEM from closed out dealer Fits: Husqvarna 455 rancher, 460
husqvarna 50, 51, 55 chainsaw complete starter recoil cover and pulley assembly #1
Part: starter housing cover with pulley, rewind spring, grip, Part # 503 60 88-03, 505 30 37-35, 501 76 31-01, 503 54 39-01 Condition: good used/working shape. Fits: Husqvarna 55, 51, 50 55 Rancher
husqvarna 357, 359, 340, 345, 350 chainsaw intake manifold partition and clamp part # 537 25 13-02 (D903)
Part: intake manifold partition and clamp Part # 537251302 Condition: new old stock from closed out dealer. Fits: Husqvarna 357, 359, 340, 345, 350 and Jonsered 2159 turbo
husqvarna 455 rancher chainsaw intake flange 537 24 15 new (UNH003)
Part: partition for the intake Part # 537 37 14 01 5372415 Condition: new old stock from closed out dealer. Fits: Husqvarna 455 Rancher 460
(2 in stock)
Husqvarna 562 chainsaw AV tank mount 505 12 87-02 new (d1001)
AV tank mount 505128702 505 12 87-01 new old stock from closed out dealer. fits Husqvarna 545 550 555 560 562 xp 562xp Jonsered CS2253
mcculloch sp-81, sp-80, sp-60 chainsaw fuel filter 63932 new (bin v)
Part: fuel filter Part # 63932 Condition: New old stock from closed out dealer. May be a bit dusty from years of storage. Fits: McCulloch Super Pro 80, 81, 60, some models of Pro Mac 610 Pro Mac 55. May also fit other models
Stihl 031 Chainsaw starter housing strap 1113 195 6500 new (st 207)
Stihl 031 starter housing strap tab Part #: 1113-195-6500 11131956500 New old stock part from closed out dealer.
Stihl 028, 038, 026, 036 chainsaw chain catcher NEW 1125 650 7700 (st-206a)
Chain catcher. Stihl part number 11256507700 New old stock from closed out dealer. Fits Stihl 024, 026, 028, 029, 034, 038, 036, 039, MS260, MS290, MS310, MS340, MS360, MS390 and others
stihl chainsaw starter pawl for many models newpart # 1125 195 7200 (st-206a)
Part: (1) starter pulley pawl Part # 1125 195 7200 Condition: new, old stock from closed out dealer. Fits: Stihl models MS 200, 180, 190t, 260, 240, 210, 230, 250, 341, 340, 290, 310, 280, 440, 044, 046, 460, 361, 360, 270 029 039
Husqvarna 61 - 162se chainsaw small fine machine thread av buffer mount for metal tank new 501 53 05-01 (H-25)
Part: small rubber machine thread av buffer mount absorber / antivibe element for models that have metal tanks Part # 501 53 05 01 Condition: New old stock from closed out dealer. Dusty/dirty from years of storage. Fits: Husqvarna 162, 61 Rancher Practica, 162se 162sg, Practica 40, 140, 240 s, ...
(4 in stock)
Husqvarna 55 Chainsaw Base Gasket 503 16 21-01 NEW (H-58)
Cylinder head gasket. Superseded to 503 16 21-03 NEW from closed out dealer. Fits Husqvarna 50 51 55 55 Rancher and others
Pioneer P41 Chainsaw Bar outer plate 430893 new (P116)
Outer bar plate 430893 New old stock from closed out dealer. Has some surface rust from years of storage. Fits Pioneer P-41, P-51, P-61, P-50 P-60 P50 P60 series
(1 in stock)
Husqvarna 395, 372 + chainsaw screw 503 20 34-25 new (H-48)
Part: top cylinder cover screw Part# 503 20 34 25 Condition: new old stock from closed out dealer. May have slight surface rust/oxidation from years of storage. Fits: Husqvarna 395, 385, 372, 351, 359