Jonsered 2065 Chainsaw Intake Manifold Boot
Part: Intake manifold boot Condition: Good used/working shape Fits: Jonsered 2065
Pioneer 1200 Chainsaw Clutch Cover
Part: Clutch cover 429145 Condition: Good used/working shape. Some pitting/oxidation and paint loss. Fits: Pioneer 1200, 1200a
Shindaiwa 488 Chainsaw Ignition Off Switch
Part: Ignition off switch. Part # 22160-22100 Condition: Good used/working shape Fits: Shindaiwa 488
Troy Bilt MS 42 Chainsaw Choke Rod
Part: Choke rod Condition: Good used/working shape Fits: Troy Bilt MS42
(2 in stock)
Troy Bilt MS 42 Chainsaw Right Trigger Handle Half
Part: Right Trigger Handle Half MC-9028-310502 Condition: Good used/working shape Fits: Troy Bilt MS42 4216 4016 MCCULLOCH MS1436NAV 36CC, MS1434NAV, MS1636NAV, MS1636NAVCC AND MANY OTHERS. ALSO OTHER CHAINSAWS BUILT BY MTD SUCH AS THE TROY BILT MS42, CRAFTSMAN 316. SERIES
(1 in stock)
Troy Bilt MS 42 Chainsaw Ignition Off Switch
Part: Ignition off switch Condition: Tested and works Fits: Troy Bilt MS42, TB4018 TB4218, MTD built craftsman and mcculloch.
shindaiwa 488 chainsaw bar bolt set
Part set of bar studs / bolts. Part # 72312-21520 Condition: good used/working shape Fits: shindaiwa 488
shindaiwa 488 chainsaw fuel line and filter
Part: fuel line and filter Condition: good used/working shape Fits: shindaiwa 488
shindaiwa 488 chainsaw av buffer mount
Part: av buffer mount cushion Condition: good used/working shape Fits: shindaiwa 488
shindaiwa 488 chainsaw air filter #1
Part: air filter Condition: usable shape-has a few pin holes Fits: shindaiwa 488
(1 in stock)
husqvarna 350 chainsaw inner and outer bar plate set
Part: inner and outer bar plate set Condition: good used/working shape Fits: Husqvarna 350
efco 952 chainsaw bar stud set
Part: bar stud / bolt set Condition: good used/working shape Fits: Efco 952
stihl 038 chainsaw inner and outer bar plate set
Part: bar plate set Condition: in good used shape Fits: Stihl 038 038av 038 AV Super 038 Magnum
Husqvarna 350 Chainsaw Primer Bulb
Part: Primer bulb Condition: Good used/working shape Fits: Husqvarna 350
stihl 041 chainsaw flywheel insert
Part: flywheel insert Condition: good used/working shape Fits: stihl 041
mcculloch Mini Mac 25 - 35 Chainsaw Flywheel Assembly for Plastic Pulley
Part: flywheel with starter pawls for mini macs with an all plastic starter pulley. Pawls are turned at 90 degree angle to engage with pulley teeth. Part number 91961 Condition: good used/working shape-no broken fins Fits: McCulloch Mini Mac 25 30 35
mcculloch super 250 chainsaw piston and cylinder assembly
Part: piston and cylinder assembly-includes the rings and connecting rod Condition: good used/working shape with no breaks-came off a saw with good compression Fits: McCulloch Super 250, 250 and others
McCulloch 250 Super Chainsaw Air Filter Cover
Part: Air filter cover Condition: Good used/working shape Fits: McCulloch 250 Super
McCulloch 250 Super, 250 Chainsaw Throttle Trigger
Part: Throttle trigger Condition: Good used/working shape Fits: McCulloch 250 Super and 250, 1-42, 1-51, 1-52, 1-53 and may also fit other models
Jonsered 2149 Turbo Chainsaw Intake Manifold Boot
Part: Intake manifold boot Condition: Good used/working shape Fits: Jonsered 2149 Turbo
Jonsered 2149 Turbo Chainsaw Ignition Coil
Part: Ignition coil Condition: Tested and works Fits: Jonsered 2149 Turbo
Poulan Micro XXV Chainsaw Points and Condenser
Part: Points and condenser Condition: Good used/working shape Fits: Poulan Micro XXV
(1 in stock)
Husqvarna Practica 44 Chainsaw Starter Pulley
Part: Starter recoil rewind Pulley 501 46 07-01 Condition: Good used/working condition Fits: Husqvarna Practica 44 444 40 140s etc.
Jonsered 451 e ev Chainsaw Tank Vent
Part: Tank vent line Condition: good used/working shape Fits: Jonsered 451e, 451ev
partner 500 chainsaw ignition coil assembly
Part: ignition coil with the electronic trigger unit Condition: good used shape-tested and works Fits: older model Partner 500 chainsaws
mcculloch sp 125c chainsaw pump gasket 86186 new box 13
Part: pump gasket Part Number: 86186 Condition: new old stock part-may be dusty/dirty/have minor oxidization from being in storage for so long Fits: McCulloch SP 125c Location: Box 13
(1 in stock)
mcculloch chainsaw bolt 214100 new (bin 13)
Part: bolt Part Number: 214100 Condition: new old stock part-may be dusty/dirty/have minor oxidization from being in storage for so long Fits: some McCulloch chainsaw models Location: Box 13
mcculloch chainsaw inset screw 110554 new (bin 12)
Part: inset screw Part Number: 110554 Condition: new old stock part-may be dusty/dirty/have minor oxidization from being in storage for so long Fits: some McCulloch chainsaw models Location: Box 12
mcculloch chainsaw spark plug wire with boot new box 12
Part: spark plug wire and boot Condition: new part Fits: many McCulloch models Location: box 12
Jonsered 451 E, EV Chainsaw Flywheel Key
Part: Flywheel Key Condition: Good used/working condition Fits: Jonsered 451 E, EV
Husqvarna Practica 44 Chainsaw Fuel Tank Rear Trigger Handle Assembly
Part: Fuel tank rear trigger handle assembly. Condition: Good used/working condition. With rubber av mounts and trigger throttle parts. Fits: Husqvarna Practica 44 444 and others
Husqvarna Practica 44 Chainsaw Top Cover Shroud
Part: Top cover shroud Condition: Good used/working condition Fits: Husqvarna Practica 44
McCulloch Mac 10-10 Chainsaw Oil Pick Up Line
Part: Oil pick up line / hose. PN 91672 Condition: Good used/working condition Fits: McCulloch Mac 10-10
Craftsman 14" Chainsaw Flywheel w/ Starter Pawls
Part: Flywheel w/ starter pawls Condition: Good used/working condition. No broken fins Fits: Craftsman 14" (Poulan built) 2.2 cid Model 358.351142
McCulloch Mac 1-10 Chainsaw Frame Grip Handle Bar #1
Part: Frame Grip Handle Bar Condition: Good used/working condition Fits: McCulloch Mac 1-10
Homelite Super XL Drive Case (blue)
Part: Drive case (blue) Condition: good used/working condition Fits: Homelite Super XL
Homelite XL-12 Chainsaw Cylinder Gasket
Part: Cylinder gasket Condition: good used/working condition Fits: XL12, XL-12, Super XL Automatic. Older models with 1 petal reed.
mcculloch chainsaw gasket part # 92038 new (bin 12)
Part: gasket Part Number: 92038 Condition: new old stock part-never used-may be dusty/dirty/have minor oxidization from being in storage for so long Fits: some McCulloch chainsaw models Location: Box 12
mcculloch chainsaw gasket part # 89057 new box 12
Part: gasket Part Number: 89057 Condition: new old stock part-never used-may be dusty/dirty/have minor oxidization from being in storage for so long Fits: some McCulloch models Location: Box 12
mcculloch chainsaw rivet part # 110470 new (bin 12)
Part: rivet Part Number: 110470 Condition: new old stock part-never used-may be dusty/dirty/have minor oxidization from being in storage for so long Fits: some McCulloch chainsaw models Location: Box 12
mcculloch chainsaw gasket part # 94726 new box 10
Part: gasket Part Number: 94726 Condition: new old stock part-never used-may be dusty/dirty/have minor oxidization from being in storage for so long Fits: some McCulloch chainsaw models Location: Box 10
mcculloch sp60 sp-60 chainsaw piston 87713 new
Part: piston with rings Part Number: 87713 Condition: new old stock part-never used-may be dirty/dusty/have minor oxidization from being in storage for so long Fits: McCulloch SP-60 / SP 60 Location: Box 10
McCulloch Pro Mac 610, 605, 650 3.7 Timber Bear Chainsaw Crankcase Pan
Part: 3.7 Timber Crank Case Pan Condition: Good used/working shape Fits: McCulloch Pro Mac 610, 605, 650
Homelite XL Chainsaw Throttle Trigger with Safety
Part: Throttle trigger with safety Condition:good used/working shape Fits: Homelite XL
(3 in stock)
pioneer farmsaw filter elbow mount
Part: air filter elbow/mount. Part # 430192 Condition: good used/working shape Fits: Pioneer Farmsaw, Farmsaw II and other models
(1 in stock)
John Deere 60 V Chainsaw Bottom Support Plate
Part: bottom support plate Condition: good/used working shape - may not include any mounts. Fits: John Deere 60V -also fits Echo CS-602VL
John Deere 60 V Chainsaw Handle AV Buffer Mount
Part: Rear Trigger Handle AV Buffer Mount Condition: good/used working shape Fits: John Deere 60V, 70v, 80ev, Echo CS-602VL CS-702VL CS-750EVL
Craftsman 20" 46cc Chainsaw choke rod
Part: Choke rod Condition: good used/working condition Fits: Craftsman 20" 46cc Model 358.350202
mcculloch chainsaw oil pump gasket 92874 new (box 9)
Part: oil pump gasket Part Number: 92874 Condition: new old stock part-never used-may be dusty/dirty from years of storage Fits: some McCulloch chainsaw models Location: Box 9
dolmar 114 117 120 chainsaw fuel tank rear trigger handle #3
Part: fuel tank rear trigger handle with the trigger parts 119 114 090 Condition: good used/working shape with no leaks-has a minor scrapes and gouges Fits: Dolmar 114 117 120 chainsaws
dolmar 112 fuel tank rear trigger handle assembly
Part: fuel tank/rear trigger handle-includes (5) av mounts, throttle trigger/safety/lock Condition: good used/working shape Fits: Dolmar 112 114 113 116 and others
poulan 2800 chainsaw trigger handle cover
Part: trigger handle cover 530-027207 Condition: good used/working shape Fits: Poulan 2800, 2700, 3000, 3300 poulan pro 285 305 335
(1 in stock)
Pioneer P50 chainsaw bottom handle brace plate only
Part: bottom brace plate / lower handle support frame. PN 430575 Condition: good used/working shape-has some paint loss Fits: Pioneer P50 / P 50may also fit other P series models
pioneer p50 p 50 chainsaw fuel line and filter
Part: fuel line, fitting and filter. 429975 Condition: good used/working shape Fits: Pioneer P50 P40 P 40 50 Farmsaw and others
(1 in stock)
husqvarna 51, 55 chainsaw piston wrist pin and bearing
Part: piston wrist pin and bearing Condition: good used/working shape Fits: Husqvarna 51, 55
roper built craftsman 3.7 chainsaw late, red model starter / recoil cover and pulley assembly
Part: starter cover with the pulley and spring Condition: good used/working shape with no breaks-some paint loss Fits: late model (newer) Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
craftsman 3.7 chainsaw idle adjustment screw
Part: idle adjustment screw Condition: good used/working shape Fits: Roper built Sears Craftsman 3.7 chainsaws with model numbers: 917.353770, 917.353771, 917.353730. May also fit other models.
(1 in stock)
husqvarna 272 XP chainsaw cylinder gasket
Part: cylinder gasket Condition: good used/working shape Fits: Husqvarna 272 XP
poulan wild thing 4018 chainsaw intake manifold/carb adaptor
Part: intake manifold/carb adataptor Condition: good used/working shape Fits: Poulan Wild Thing P4018WM and others
poulan wild thing 4018 chainsaw choke lever rod
Part: choke lever Condition: good used/working shape Fits: Poulan Wild Thing P4018WM & model 4018 40cc 18" and others
poulan wild thing 4018 chainsaw brake band, spring and links
Part: brake band, spring and links Condition: good used/working shape Fits: Poulan Wild Thing P4018WM and others
mcculloch chainsaw spark plug boot 94303 new
Part: spark plug boot Part Number: 94303 Condition: new old stock part-never used-may be dust/dirty from years of storage Fits: some McCulloch chainsaw models Location: Box 8
husqvarna 257 xp chainsaw starter cover with pulley and spring #1
Part: starter cover with pulley and spring Part # 503 54 17-01, 503 17 89-02, 501 63 02-02 Condition: good used/working shape Fits: Husqvarna 257 254
(1 in stock)
husqvarna 359, 357 xp, 353 and jonsered 2159 turbo chainsaw guide bar plate (359 bin)
Part: guide bar plate. Part # 503 85 66-01 Condition: good used/working shape Fits: Husqvarna 359, 357 XP, 353 and Jonsered 2159 2156 Turbo
stihl 064 chainsaw tank vent plug
Part: tank vent plug Condition: good used/working shape Fits: Stihl 064
mcculloch Pro Mac 610, 605, 650, 3.7 Timber Bear chainsaw brake arm channel 93721 new
Part: brake arm channel Part Number: 93721 Condition: new old stock part-never used-may be dusty/dirty from being in storage for so long Fits: McCulloch Pro Mac 610, 605, 650, 3.7 Timber Bear-may also fit other models Location: Box 7
mcculloch chainsaw carburetor gasket 863062 new Box 7
Part: carburetor gasket Part Number: 863062 Condition: new old stock part-never used-may be dusty/dirty from being in storage for so long Fits: some McCulloch models Location: Box 7
mcculloch pro mac 655 610 650 chainsaw starter grip insert 214699 new (Bin 7)
Part: starter grip insert Part Number: 214699 Condition: new old stock part-never used-may be dusty/dirty from being in storage for so long Fits: McCulloch Pro Mac 655 610 650-may also fit other models Location: Box 7
McCulloch Mini Mac, Mini Mac 6 chainsaw handle washer 84520 new
Part: handle washer Part Number: 84520 Condition: new old stock part-never used-may be dusty/dirty from years of storage Fits: McCulloch Mini Mac and Mini Mac 6 Location: Box 7
McCulloch Power Mac 310 320 330 340 chainsaw handle mount 92704 new (bin 7)
Part: handle mount Part Number: 92704 Condition: new old stock part-never used-may be dusty/dirty from years of storage Fits: McCulloch Power Mac 310 320 330 340 Location: Box 7
pioneer p50 chainsaw air filter cover
Part: air filter cover Condition: good used/working shape with no breaks Fits: Pioneer P-50
mcculloch cp 125 chainsaw muffler clamp assembly 83368 new
Part: muffler clamp Part Number: 83368 Condition: new old stock part-never used-may be dusty/dirty from years of storage Fits: McCulloch CP 125 Location: Box 5
stihl 038 av chainsaw early model oil cap # 1 no O ring
Part: oil cap- cap only, does Not have the o ring Condition: good used/working shape Fits: early (older) model Stihl 038 AV Chainsaws
(1 in stock)
Stihl 038 AV Chainsaw Clutch Mechanism
Part: clutch mechanism Condition: good used/working shape Fits: Stihl 038 AV Chainsaw
Homelite Super EZ Chainsaw plastic Starter Pulley
Part: starter pulley. may vary in cosmetic design. Condition: good used/working shape Fits: Homelite Super EZ
Pioneer P20 P24 P25 P26 Chainsaw Fuel Tank Fitting
Part: fuel Tank fitting and line assembly Condition: good used/working shape Fits: P20/24/25/26
Homelite XL-2 XL2 Chainsaw Piston, Cylinder, Crankshaft, Crank rod
Part: piston and cylinder with the crankshaft, rod, ring Condition: good used/working shape-has good compression, is not scored-top fin has a large chip in it as visible in picture Fits: Homelite XL-2
Homelite XL-2 XL2 Chainsaw Ignition Off Switch
Part: ignition off switch Condition: good used/working shape Fits: Homelite XL-2
Husqvarna 246 Chainsaw Starter/Recoil Cover & Pulley Assembly
Part: starter cover with pulley, spring and pulley handle Condition: good used/working shape-has very heavy grime Fits: Husqvarna 246
Husqvarna 246, 42 Chainsaw Oil Cap
Part: oil cap. PN 501 62 66-02 Condition: good used/working shape. May not include keeper. Fits: Husqvarna 246, 42
Husqvarna 371, 372XP Chainsaw Oil Line & Filter
Part: oil line hose and pickup. Part # 503 42 67-01 and 501 54 41-02 Condition: good used/working shape Fits: 362, 365, 371, 372 XP, 372xt, 385 XP, 390 XP, Jonsered 2172, 2171, 2071 Turbo, 2065, 2165, 2077, 2083 turbo and some other models
(1 in stock)
McCulloch Power Mac 310 Chainsaw yellow Bottom Plate Shroud 214154
Part: yellow bottom shroud plate, part #214154 Condition: good used/working shape with no breaks, has some minor paint loss Fits: McCulloch Power Mac 310/320/330
Poulan Craftsman 3.7 Chainsaw Fuel/Gas Cap
Part: fuel cap Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080.
Poulan Craftsman 3.7 Chainsaw Ignition Off Switch & Wire
Part: ignition off switch and wire Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 series chainsaws.
Poulan Craftsman 3.7 Chainsaw Bar Plate
Part: bar plate Condition: good used/working shape Fits:Craftsman 3.7 and some other Craftsman chainsaws with model #358.356080. Also fits some Poulan 3400-4000 sereies chainsaws.
(1 in stock)
McCulloch MacCat MacCat 38cc Chainsaw Extension Spring & Hardware MC-322165
Part: extension spring, part #MC-322165 and hardware Condition: good used/working shape Fits: MacCat 38cc-also fits some other McCulloch models
Jonsered 670 Chainsaw fuel Tank Trigger Handle kit for Recirculating Carbs #3
Part: fuel /gas tank with the throttle trigger, safety lever interlock and handle covers. 501 77 27-04 Condition: good used/working shape Fits: Jonsered 670 Chainsaws which have recirculating carburetors
Husqvarna 181 Chainsaw Air Filter Mount & Bolts
Part: filter mount with bolts Condition: good used shape Fits: Husqvarna 181
Husqvarna 181 Chainsaw 52mm Cylinder
Part: 52mm bore OEM cylinder 501 81 29-01 Condition: good used shape-is not scored, has good compression and no breaks Fits: Husqvarna 181, 281 SE SG
Jonsered 2054 2055 Chainsaw Clutch Washer & E Clip
Part Name: clutch washer and E clip Condition: good used/working shape Fits: Jonsered 2054 2055 Turbo
(1 in stock)
Husqvarna 242 Chainsaw Clutch Rim Drum
Part Name: clutch rim drum Condition: good used/working shape Fits: Husqvarna 242 chainsaws
Husqvarna 242 Chainsaw Starter Pawl, Stud & Spring Set
Part Name: starter pawl, stud and spring set Condition: good used/working shape Fits: Husqvarna 242 chainsaws
Husqvarna 44 Chainsaw Chain Stop Catcher
Part Name: Chain Stop Catcher Condition: good used/working shape Fits: Husqvarna 44 chainsaws
Stihl MS 260 MS260 Complete Chainbrake Brake Assembly
Part Name: Chainbrake Brake Handle Assembly Detailed Condition Description: good used shape Fits the Following Models: MS260, 026 AV Pro
(4 in stock)
Stihl 08-S S-10 Chainsaw Oil Cap
Oil cap in good used shape with no cracks. Fits Shihl 08S and S10.
(3 in stock)
Stihl 042 048 AV Chainsaw Clutch Mechanism Type 1
Clutch Mechanism (shoes, springs and carrier) for 042 048 AV Stihl. In nice used shape. 1117 160 2005
Stihl 041 AV Chainsaw Crankshaft Crank Shaft & Rod
Part Name: crank shaft and connecting rod Condition: good used/working shape Fits the Following Models: Stihl 041 AV
(3 in stock)
Stihl 038 AV Chainsaw Throttle link
Part: throttle link rod Condition: good used/working shape Fits: Stihl 038 av
Stihl 031, 032 AV Chainsaw Oiler drive washer
Part Name: oiler pin drive washer/cover. 1113 030 7500 Condition Description: good used shape Fits the Following Models: Stihl 031, 032 AV, 031av 032av