Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.
(2 in stock)
husqvarna 36, 41 chainsaw cylinder cover screw pn 530 01 59-03 new (box H-49)
Part: cylinder cover screw Part #530 01 59 03 Condition: new old stock OEM part. Dusty/dirty from years of sitting in storage. Fits: Husqvarna 36, 41 Location: Box H-49
(2 in stock)
husqvarna 340, 345, 350 chainsaw starter sleeve pn 501 63 06-01 new (box H-46)
Part: starter bushing sleeve Part # 501 63 06 01 Condition: new old stock OEM part Fits: Husqvarna 340, 345, 350, 346xp 353 351 371 371xp 372 372xp 365 362 359 357xp. Jonsered 2141 2145 2150 2152 2153 2156 2159 2063 2163 2065 2165 2166 2171 2071 2172 Turbo. And others. ...
husqvarna 266, 61 chainsaw muffler attachment plate pn 501 60 84-01 new (h-46)
Part: muffler attachment bracket plate Part # 501 60 84 01 Condition: new old stock OEM part. Has minor rust from years of storage. Fits: some models of Husqvarna 266, 61 Location: box H-46
husqvarna 65L chainsaw clutch hub pn 501 27 79-01 new (box H-44)
Part: clutch hub / spider carrier Part # 501 27 79 01 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 65 L Location: Box H-44
(2 in stock)
husqvarna 40, 45 chainsaw left rear trigger handle half
Part: left side rear trigger handle half. Part # 503 10 56-02 Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 285 cd chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, spring and grip. 501 40 18-02 Condition: good used/working shape Fits: Husqvarna 285cd, 285 CD
husqvarna 371, 372 chainsaw set of keeper clips / rings
Part: piston keeper ring / clip set Condition: good used/working shape Fits: Husqvarna 371, 372
husqvarna 40, 45 chainsaw assorted hardware lot - screws
Part: lot of assorted hardware – screws, nuts – everything pictured Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 162 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley and spring Condition: good used/working shape Fits: Husqvarna 162
(1 in stock)
husqvarna 162 chainsaw bar nut set
Part: set of bar nuts Condition: dinged up but in good used/working shape Fits: Husqvarna 162
(1 in stock)
husqvarna 261, 262 chainsaw starter rewind spring
Part: starter rewind spring 501 63 02-02 Condition: good used/working shape Fits: Husqvarna 261, 262xp, 257, 254
husqvarna 285 cd chainsaw handle hodler pn 501 60 94-01 new (bin H-30)
Part: handle holder support Part # 501 60 94 01 Condition: New old stock part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 285 CD Location: H-30
husqvarna chainsaw screw pn 725 53 37-55 new (bin H30)
Part: screw Part # 725 53 37 55 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: many Husqvarna chainsaw models, such as 266, 61, 272, 181, 281, 272 Location: Husky Bin H-30
husqvarna 480, 77 chainsaw idle speed screw pn 501 22 19-01 new (bin H30)
Part: idle speed screw Part # 501 22 19 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 480, 77, 180 s Location: Husky Bin H-30
husqvarna 357, 359 chainsaw screw pn 503 20 07-10 new (bin H-16)
Part: screw, m5 x 10 Part # 503 20 07 10 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 359 357 Location: Husky bin H-16
(1 in stock)
husqvarna 480, 77, 65 chainsaw carb throttle shaft pn 501 69 10-01 new (bin H-22)
Part: carburetor throttle shaft Part # 501 69 10 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 480, 77, 65 Location: Husky bin H-22
husqvarna 285, 2100, 1100 chainsaw carb choke shaft pn 501 48 37-01 new (bin H-22)
Part: carburetor choke shaft Part # 501 48 37 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 285, 2100, 1100 Location: Husky bin H-22
husqvarna 268 special screw pn 729 53 42-05 new (bin h-18)
Part: filter base screw Part # 729 53 42-05 Condition: New old stock OEM part. May or may not be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 268 Special Location: Husky Bin H-18
(1 in stock)
husqvarna 44, 444 chainsaw throttle lock pn 501 82 08-01 new (bin H-11)
Part: throttle safety lever Part # 501 82 08 01 Condition: New old stock OEM part. May be dusty/dirty/have minor scuffs from years of storage. Fits: Husqvarna 44, 444 Location: Husky Bin H-11
husqvarna 266 268 + chainsaw shaft pn 501 51 97-02 new (h-003)
Part: trigger shaft Part # 501 51 97 02 Condition: New old stock OEM part Fits: Husqvarna 266, 268, 61, 272
husqvarna 33, 38 chainsaw air filter pn 507 43 33-85 new (bin H-11)
Part: air filter element Part # 507 43 33 85 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 33, 38. Jonsered 370 380. Location: Husky Bin H-11
husqvarna 357, 359 chainsaw choke control pn 503 92 25-01 new (bin h-11)
Part: choke control lever Part # 503 92 25 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 357, 359 Location: Husky Bin H-11
(1 in stock)
husqvarna 44, 240 + chainsaw muffler bracket pn 501 57 44-01 new bin h-51
Part: muffler support bracket Part # 501 57 44 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years or storage Fits: Husqvarna 44, 444, 340, 240 Location: bin H-51
(1 in stock)
husqvarna 268 chainsaw starter pulley pn 503 10 24-03 new bin h-50
Part: starter pulley Part # 503 10 24 03 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 268, 61 Late Location: Bin H-50
(4 in stock)
husqvarna 240 chainsaw gasket pn 501 45 63-01 new bin h-50
Part: gasket Part # 501 45 63 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 240 S Practica, 240 SE, 240 SG, may also fit other models Location: Bin H-50
(2 in stock)
husqvarna 50, 45 + chainsaw oil pump drive gear pn 503 10 49-02 new bin h-50
Part: oil pump worm drive gear / wheel Part # 503 10 49 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 40, 45, 50, 51, 55 Location: Bin H-50
husqvarna 3120 chainsaw starter pulley pn 501 89 67-01 new bin h-15
Part: starter pulley Part # 501 89 67 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 3120, may also fit other models Location: Bin H-15
(1 in stock)
husqvarna 50 chainsaw brake arm lever pn 501 82 92-02 new bin h-15
Part: brake arm lever Part # 501 82 92 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 50 Location: Bin H-15
husqvarna 281, 288 chainsaw filter mount bolt pn 503 20 21-13 new box h-12
Part: filter mount bolt Part Number: 503 20 21 13 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 288, 281 Location: Box H-12
(2 in stock)
husqvarna 570, 575 + chainsaw air filter knob pn 502 20 83-02 new box h-12
Part: air filter knob Part Number: 502 20 83-02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 570, 575, 371, 362, 372 Location: Box H-12
(2 in stock)
husqvarna 281, 181 + chainsaw piston clip pn 501 29 86-01 new box H-23
Part: (1) piston clip / keeper Part Number: 501 29 86 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 281, 181, 1100 cd, 285 Location: Box H-23
husqvarna 365, 362, 371, 372 chainsaw av spring mount (hard) new pn 503 89 56-02 (box h-23)
Part: av spring mount - hard. Mounts onto the side of the fuel tank Part Number: 503 89 56 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 365, 362, 372, 371 Location: Box H-23
husqvarna 266, 162 + chainsaw bushing pn 501 52 78-01 new box h-2
Part: bushing Part Number: 501 52 78 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 266, 162 SE & SG, 162, 181, 281 Location: Box H-2
husqvarna 61 chainsaw ball pn 503 41 92-01 new box h-2
Part: ball Part Number: 503 41 92 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 61 Location: Box H-2
husqvarna 444, 44 chainsaw saw dust guard pn 501 82 91-01 new box h-2
Part: sawdust chip guard Part Number: 501 82 91 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 444, 44 Location: Box H-2
husqvarna 365, 362 chainsaw pin coupling nut pn 501 53 74-01 new box h-2
Part: pin coupling / bar adjusting nut Part Number: 501 53 74 01 Condition: new old stock part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 365, 362 Location: Box H-2
husqvarna 163 chainsaw ignition coil
Part: ignition coil Condition: good used shape, tested and works Fits: Husqvarna 163
husqvarna 50 chainsaw flywheel cover
Part: flywheel cover Condition: good used/working shape Fits: Husqvarna 50
(1 in stock)
husqvarna 394 xp chainsaw bar bolt set
Part: set of bar studs / bolts 501 81 57-01 Condition: good used/working shape Fits: Husqvarna 394 395 XP 394xp 395xp
husqvarna 242 chainsaw ignition coil module
Part: ignition module Condition: good used shape, tested and works Fits: Husqvarna 242
(2 in stock)
husqvarna 50 chainsaw intake manifold base and boot
Part: intake manifold base and intake boot Condition: good used, working shape Fits: Husqvarna 50
husqvarna 395 chainsaw 56mm piston kit new
Part: 56mm piston with rings, pin and keepers. Part number 537 13 76-71 Condition: new, after-market part Fits: Husqvarna 395 xp, 395xp Location: new piston box
Husqvarna 50, 51, 55, Chainsaw Plug Cover
Part: Plug cover. PN 501 76 44-03 Condition: Good used/working shape Fits: Husqvarna 50, 51, 55
husqvarna 240 chainsaw starter/recoil cover and pulley assembly
Part: starter cover with pulley and spring Condition: good used/working shape-has several broken grills Fits: Husqvarna 240
husqvarna 65L chainsaw ignition off switch and panel
Part: ignition off switch and panel Condition: good used/working shape-panel has an edge break Fits: Husqvarna 65 L
Husqvarna 61 Chainsaw Cylinder Plug
Part: Cylinder Plug Condition: Good used/working shape Fits: Husqvarna 61
Husqvarna 61 Chainsaw Filter Mount w/ Carb Bolts
Part: Filter mount w/ carb bolts Condition: Good used/working shape Fits: Husqvarna 61
husqvarna 266, 61 chainsaw pulley grip handle
Part: grip handle Condition: good used/working shape Fits: Husqvarna 61 266
Husqvarna 266 SE 48mm Chainsaw Piston, Ring, Bearing and Pin
Part: Piston, ring and bearing Condition: Good used/working shape Fits: Husqvarna 266 SE 48mm
Husqvarna 280 CP Chainsaw Top Cover Shroud
Part: CP Top cover shroud Condition: Good used/working shape. Has long hairline crack Fits: Husqvarna 280 CP
(2 in stock)
husqvarna 350 chainsaw inner and outer bar plate set
Part: inner and outer bar plate set Condition: good used/working shape Fits: Husqvarna 350
Husqvarna Practica 44 Chainsaw Bar Chain Tensioner Adjuster
Part: Bar chain tensioner adjuster 501 45 41-01, 501 54 63-01 Condition: Good used/working condition Fits: Husqvarna Practica 44, 444, 140, 140s and others
Husqvarna Practica 44 Chainsaw Intake Manifold
Part: Intake manifold Condition: good used/working condition Fits: Husqvarna Practica 44
(2 in stock)
Husqvarna 36, 41 Chainsaw Muffler
Part: muffler 530 06 94-15Condition: good used/working shapeFits: Husqvarna 36, 41. Jonsered 2036 2040
(1 in stock)
Husqvarna 36, 41 Chainsaw Muffler Heat Shield
Part: muffler heat shield Condition: good used/working shape Fits: Husqvarna 36, 41
(1 in stock)
Husqvarna 36, 41 Chainsaw air duct cleaner with turbo clean seal
Part: Intake air duct (air cleaner) pn 530-029813 & seal, pn 530-019203 Condition: good used/working shape Fits: Husqvarna 36, 41
husqvarna 272 xpg chainsaw rear trigger handle fuel tank assembly for heated handle
Part: rear trigger handle/fuel tank assembly with heated handle-includes (6) av mounts, throttle trigger, safety, switch, fuel cap, fuel line/filter Condition: good used/working shape with no breaks or leaks-has some paint loss Fits: Husqvarna 272 xpg
husqvarna 262 xp chainsaw oil cap
Part: oil cap Condition: good used/working shape Fits: Husqvarna 262 XP
husqvarna 257 xp chainsaw flywheel and starter pawls
Part: flywheel and starter pawls 503 52 94-01 Condition: good used/working shape with no broken fins Fits: Husqvarna 257 XP
(2 in stock)
husqvarna 359, 357 xp, 353 and jonsered 2159 turbo chainsaw guide bar plate (359 bin)
Part: guide bar plate. Part # 503 85 66-01 Condition: good used/working shape Fits: Husqvarna 359, 357 XP, 353 and Jonsered 2159 2156 Turbo
husqvarna 359, 357 xp chainsaw 5 piece av spring mount set
Part: 5 piece mount set Condition: good used/working shape Fits: Husqvarna 359, 357 XP
husqvarna 455 chainsaw u nut clip set of 3
Part: u nut, to mount top cover 503 22 69-02 Condition: good used/working shape Fits: Husqvarna 455
(3 in stock)
husqvarna 455 chainsaw choke link rod
Part: choke rod. 537 25 56-01 Condition: good used/working shape Fits: Husqvarna 455, 455 Rancher, 460
(2 in stock)
husqvarna 141, 136 chainsaw crankcase cover
Part: crankscase cover. Part # 530-052428 / 530052428 Condition: good used/working shape Fits: Husqvarna 141, 136
(3 in stock)
husqvarna 136, 141 chainsaw intake sleeve/boot
Part: intake sleeve. Part # 530029814 / 530-029814 Condition: good used/working shape Fits: Husqvarna 141, 136, 137, 142, Jonsered 2036, 2040
Husqvarna 285 Chainsaw Inner Bucking Spike type 2
Part: inner spike Condition: good used/working shape Fits: Husqvarna 285
(1 in stock)
Husqvarna 285 Chainsaw Choke Button Link
Part: choke Condition: good used/working shape Fits: Husqvarna 285
(1 in stock)
Husqvarna 246, 42 Chainsaw Oil Cap
Part: oil cap. PN 501 62 66-02 Condition: good used/working shape. May not include keeper. Fits: Husqvarna 246, 42
(1 in stock)
Husqvarna 246 Chainsaw Flywheel Cover Shroud
Part: flywheel cover 503 51 14-01 Condition: good used/working shape. May be orange or black. Fits: Husqvarna 246, 242, 42 Special
Husqvarna K185 Choke Button 503 40 00-01 NEW
Part Number: 503 40 00-01 Part Description: choke button Fits the Following Models: Husqvarna K185, will also fit Partner models Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Partner Box 38
Husqvarna 61, 266, 268 Chainsaw Bumper dog type 1
Part Name: bumper dawg / plate and bolts Fits the Following Models: Husqvarna 61 266 268 This is a USED part, in good working order.
Husqvarna 570, 575 Chainsaw Throttle Trigger & Safety
Throttle Trigger & Safety Good used shape Fits: Husqvarna 575, 570
(1 in stock)
Husqvarna 50 Rancher Chainsaw Intake Manifold & Boot
Part: intake manifold with the boot 501 77 11-01 Condition: good used/working shape Fits: Husqvarna 50 Rancher Special
Husqvarna 50 Rancher Chainsaw Fuel Tank Trigger Handle
Part: fuel tank trigger handle-includes the throttle trigger and safety Condition: good used/working shape-has some scuffing-especially on the bottom Fits: Husqvarna 50 Rancher
Husqvarna 50 Rancher chainsaw Bucking Spike and Bolts
Part: spike with bolts Condition: good used/working shape Fits: Husqvarna 50 Rancher
Husqvarna 44 Chainsaw Starter Pulley
Part Name: Starter Pulley Condition: good used/working shape Fits: Husqvarna 44 chainsaws
(2 in stock)
Husqvarna 44 Chainsaw Choke Rod
Part Name: Choke Rod Condition: good used/working shape Fits: Husqvarna 44 chainsaws
(3 in stock)
Husqvarna 44 444 Chainsaw Flywheel w/ Starter Pawls
Flywheel with starter pawls and springs. Fits Husqvarna 44 444 chainsaws. In good used shape with no cracks or broken fins. Flywheel has two key grooves. On Prufrex electronic ignition saws use the keyway marked P, on breaker-points ignition and bosch electronic igniton saws use the other keyway.
Husqvarna 44, 444, 140 Chainsaw Top Front Handle bar
Husqvarna 44, 444, 140 Top Front Handlebar. In good used shape, not cracked or bent. Some minor dings/gouges in the rubber gripping.
(3 in stock)
Husqvarna 42 Special Chainsaw Carburetor Adjust Grommet
Part: carburetor adjust grommet Part # 501 62 86-01 Condition: cosmetically ugly but functional Fits: Husqvarna 42 Special 242
Husqvarna 42 Special Chainsaw AV Buffer Mount
Part Name: av buffer mountCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 42 SpecialThis is a USED part, in good working order.
Husqvarna 42 Special Chainsaw Air Filter (felt)
Part Name: air filter Condition: in good useable shape-no tears Fits the Following Models: Husqvarna 42 Special
Husqvarna 42 Special Air Conductor Flywheel Cover
Part Name: air conductor, flywheel coverCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 42 SpecialThis is a USED part, in good working order.
(1 in stock)
Husqvarna 394 Chainsaw Throttle Cable
Part: throttle cable 503 52 04-02 Condition: good used shape Fits: Husqvarna 394 chainsaws-may also fit Husky 395 XP
Husqvarna 394 Chainsaw Tank AV Spring Mount
Part Name: Tank AV Spring Mount 503 46 85-01 Condition: good used shape Fits: Husqvarna 394 chainsaws-Husky 395XP, 395 xp
(1 in stock)
Husqvarna 36, 41 Chainsaw Crankshaft Engine Pan Bottom
Crankshaft bottom/engine pan Good used shape, no breaks Fits: Husqvarna 36, 41 Chainsaws
Husqvarna 36 41 Chainsaw U Nut Clip Set of 3
Part Name: u speed nut/clip set of 3Fits the Following Models: Husqvarna 36 41This is a USED part, in good working order.
(4 in stock)
Husqvarna 36 41 Chainsaw Chain Catcher Stop and Screw
Part Name: chain catcher 530-029850, 530 02 98-50 Fits the many saws including the following Models: Husqvarna 36, 41 Jonsered 2150, Poulan Pro 4620 This is a USED part, in good working order.
Husqvarna 36, 41 Chainsaw carb adaptor base
Part Name: carb adaptor/ manifold base mount. part # 530-037465 Fits the Following Models: Husqvarna 36, 41 This is a USED part, in good working order.
(1 in stock)
Husqvarna 359 Chainsaw Starter Pulley
Part Name: starter pulley 537 06 59-01 Condition Description: in good used shape-no breaks Fits the Following Models: Husqvarna 359, 357xp, 355. Jonsered 2156 2159 Turbo This is a USED part, in good working order.
Husqvarna 357 XP Chainsaw Clutch Cover Sprocket Side
Part Name: clutch coverCondition Description: in good used shape-some minor chips/gougeson backside of the coverFits the Following Models: Husqvarna 357 XPThis is a USED part, in good working order.
Husqvarna 357 XP Chainsaw Air Filter type 1 (flocked)
Part Name: flocked/felt air filter Condition Description: good used/working shape Fits the Following Models: Husqvarna 357 XP
Husqvarna 285 Chainsaw Bucking Spike type 1
Part: bucking spike Condition: good used/working shape Fits: Husqvarna 285
Husqvarna 266 Chainsaw Right Crankcase Crank Case Half #1 (with studs)
Part Name: right side (clutch side) crankcase half Part Description: Solid used/working shape. Has some minor chipping. Fits the Following Models: Husqvarna 266
(1 in stock)
Husqvarna 262XP, 254 oil pickup line and filter
Oil line that mounts under the oil pump. Includes the filter on the end. Fits Husqvarna 262 xp, 254
Husqvarna 25R 24R Trimmer Boss 501 78 49-01 NEW
Part Number: 501 78 49-01Part Description: bossFits the Following Models: Husqvarna 24R 25R, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 36 (Partner bin)
(1 in stock)
Husqvarna 254 Chainsaw 3/8-7 Clutch Rim Drum & Bearing
Part: 3/8-7 clutch drum, bearing and rim Condition: good used/working shape Fits: Husqvarna 254
(1 in stock)
Husqvarna 254 257 XP Chainsaw Clutch Mechanism
Part Name: Husqvarna 257 254 XP Chainsaw Clutch Mechanism Detailed Condition Description: nice used shape Fits the Following Models: 254 257 XP This is a USED part, in good working order.
(2 in stock)
Husqvarna 254, 257, 262, 261 Chainsaw Brake Dust Cover
Part Name: brake cover in used/working shape 501 87 50-01 Fits the Following Models: 254, 257, 261, 262, 262xp