Orders Over $150 Ship For Free Within The USA

Cart 0

Chainsawr

SEARCH FOR PARTS

Tips for better searches

Husqvarna / Husqvarna

Sort by

Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.

Part: fuel tank trigger handle-includes the throttle trigger and safety Condition: good used/working shape-has some scuffing-especially on the bottom Fits: Husqvarna 50 Rancher

View

Part: spike with bolts Condition: good used/working shape Fits: Husqvarna 50 Rancher

View

Part Name: Starter Pulley Condition: good used/working shape Fits: Husqvarna 44 chainsaws

View

Part Name: Choke Rod Condition: good used/working shape Fits: Husqvarna 44 chainsaws

View

Flywheel with starter pawls and springs. Fits Husqvarna 44 444 chainsaws. In good used shape with no cracks or broken fins. Flywheel has two key grooves. On Prufrex electronic ignition saws use the keyway marked P, on breaker-points ignition and bosch electronic igniton saws use the other keyway.

View

Husqvarna 44, 444, 140 Top Front Handlebar. In good used shape, not cracked or bent. Some minor dings/gouges in the rubber gripping.

View

Part: carburetor adjust grommet Part # 501 62 86-01 Condition: cosmetically ugly but functional Fits: Husqvarna 42 Special 242

View

Part Name: av buffer mountCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 42 SpecialThis is a USED part, in good working order.

View

Part Name: air filter Condition: in good useable shape-no tears Fits the Following Models: Husqvarna 42 Special

View

Part Name: air conductor, flywheel coverCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 42 SpecialThis is a USED part, in good working order.

View

Part: throttle cable 503 52 04-02 Condition: good used shape Fits: Husqvarna 394 chainsaws-may also fit Husky 395 XP

View

Part Name: Tank AV Spring Mount 503 46 85-01 Condition: good used shape Fits: Husqvarna 394 chainsaws-Husky 395XP, 395 xp

View

Crankshaft bottom/engine pan Good used shape, no breaks Fits: Husqvarna 36, 41 Chainsaws

View

Part Name: u speed nut/clip set of 3Fits the Following Models: Husqvarna 36 41This is a USED part, in good working order.

View

Part Name: chain catcher 530-029850, 530 02 98-50 Fits the many saws including the following Models: Husqvarna 36, 41 Jonsered 2150, Poulan Pro 4620 This is a USED part, in good working order.

View

Part Name: carb adaptor/ manifold base mount. part # 530-037465 Fits the Following Models: Husqvarna 36, 41 This is a USED part, in good working order.

View

Part Name: starter pulley 537 06 59-01 Condition Description: in good used shape-no breaks Fits the Following Models: Husqvarna 359, 357xp, 355. Jonsered 2156 2159 Turbo This is a USED part, in good working order.

View

Part Name: clutch coverCondition Description: in good used shape-some minor chips/gougeson backside of the coverFits the Following Models: Husqvarna 357 XPThis is a USED part, in good working order.

View

Part Name: flocked/felt air filter Condition Description: good used/working shape Fits the Following Models: Husqvarna 357 XP

View

Husqvarna 35 flywheel with the starter pawls and springs. In nice used shape with no cracks or broken fins.

View

Part: bucking spike Condition: good used/working shape Fits: Husqvarna 285

View

Part Name: right side (clutch side) crankcase half Part Description: Solid used/working shape. Has some minor chipping. Fits the Following Models: Husqvarna 266

View

Oil line that mounts under the oil pump. Includes the filter on the end. Fits Husqvarna 262 xp, 254

View

Part Number: 501 78 49-01Part Description: bossFits the Following Models: Husqvarna 24R 25R, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 36 (Partner bin)

View

Part: 3/8-7 clutch drum, bearing and rim Condition: good used/working shape Fits: Husqvarna 254

View

Part Name: Husqvarna 257 254 XP Chainsaw Clutch Mechanism Detailed Condition Description: nice used shape Fits the Following Models: 254 257 XP This is a USED part, in good working order.

View

Part Name: brake cover in used/working shape 501 87 50-01 Fits the Following Models: 254, 257, 261, 262, 262xp

View

Part Name: Starter recoil cover only.Part Description: In good useable shape-right corner of cover has several broken grills.Fits the Following Models: Husqvarna 254 and 154This is a used part.

View

Part Name: pre filter and cover Condition: good used/working shape Fits: Husqvarna 242 chainsaws

View

Part Name: clutch mechanism Condition: good used/working shape Fits: Husqvarna 242 chainsaws

View

Part Name: clutch rim drum Condition: good used/working shape Fits: Husqvarna 242 chainsaws

View

Part Name: chain tensioner Condition: good used/working shape Fits: Husqvarna 242 chainsaws

View

Part: coil heating stator element Condition: good used, working shape, tested and works Fits: Husqvarna 162 SE & SG

View

Part Name: oil pump assembly 530014410, 530 01 44-10 Condition Description: in good working shape Fits the Following Models: Husqvarna 142 137 136 141 36 41 This is a USED part, in good working order.

View

Part Name: cover and screw 530052428, 530 05 24-28 Condition Description: in good used shape-no breaks-faded Fits the Following Models: Husqvarna 142 This is a USED part, in good working order.

View

Part: off switch wires. Part # 503 86 44-01 Condition: new old stock from closed out dealer. Fits: Husqvarna 335xpt

View

Part: filter mount clip. PN 503 96 27-01 Condition: new old stock from closed out dealer. Fits: Husqvarna 357xp, 359xp, Jonsered 2159 2156 turbo and some other models. And some other models

View

Part Name: air filter base mount. Part # 503 89 80 condition: new old stock from closed out dealer. Fits the Following Models: Husqvarna 51, 55

View

Part Name: throttle trigger Part Description: good used shape-no breaks Fits the Following Models: Husqvarna 261 262 XP This is a used part.

View

Chain tensioner adjuster screw with special adjusting nut, plastic dust cover, worm gear, o rings and all. 537 04 41-02 New OEM from closed out dealer. Fits: 390 XP Special, 372XP, 385XP, 390XP, 365 Special, Jonsered 2165 2171 2186 2188 Turbo

View

Automatic compression release valve Decompression Valve Husqvarna 537126803 537 12 68-03 Superseded to 537126805 537 12 68-05 In good used shape Fits 357 XP 359 334t 338xpt with auto valve cylinders

View

part: Husqvarna chainsaw 445e 450e new OEM starter recoil housing ASSY condition: new oem part# 544158502, 544 15 85-02

sale

View

Part: top cover 501 86 95-08 5018696 Condition: New old stock from closed out dealer. Dirty and a little scuffed from years of storage. Fits: Husqvarna 254

View

Part: 52mm bore OEM cylinder. Part of the complete kit part number 5035029001 Condition: new old stock from closed out dealer. Fits: Husqvarna 181, 281 SE SG

View

OEM Mahle cylinder. 50mm bore. 503626472 sans piston 50ZK6 New old stock from closed out dealer. Fits Husqvarna 371, 371xp, 372, 372xp. Jonsered 2171, 2071 Turbo. Can be retrofit onto 365 Husqvarna and 2165, 2065 Jonsered as an upgrade.

View

Cylinder 50mm bore Mahle. 50ZN11 501 68 55-71 In good used shape. Some broken fins. Fits some Husqvarna 266, 66, 266 SE SG XP, 266SE, 266XP

View

Part: air filter cover, part # 503 54 23-01 Condition: good used/working shape kinda scruffy. Scuffs, fades, no cracks Fits: came off a Husqvarna 262 xp, will also fit 261

View

Part: walbro HDA120 carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Husqvarna 262 xp, 261

View

Part: throttle trigger pin. 720182520 Condition: new old stock from closed out dealer. Fits: Husqvarna 359, 357 XP, 346 xp, 353, 351, 350, 340, 345 and others

View

Part: set of 7 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 266 se

View

Rubber grommet for the top cover resting on the cylinder head. 537 01 65-01, 537016501 new OEM Fits Husqvarna 362 365 Special 362sp 365sp 365xt 371 372 371xp 372xp 385xp 390xp 385 390. Jonsered 2063 2065 2071 2163 2165 2171 2166 2172 2188 2186 turbo. And others

View

Part: 48mm piston kit, includes the wrist pin, ring, and keeper clips Condition: new old stock from closed out dealer. Fits: Husqvarna 262

View

50mm piston with ring, wrist pin, and one keeper clip. 503 69 12-71 New old stock from closed out dealer. Fits Husqvarna 371, 371XP. 372xp, 371xp, 371 372 XP XPG. Jonsered 2171, 2071 Turbo

View

Part: 44mm piston kit - includes wrist pin and clips Replaces Part # 503 89 96 03 503899603 Condition: new old stock from closed out dealer. Fits: Husqvarna 351, 350 Jonsered 2150, 2149 Turbo. Some saws have 45mm bores, so make sure your saw has the 44mm bore prior to ordering.

View

46mm bore A/B piston with wrist pin . NO RING. Part # 537 21 96 02 New old stock from closed out dealer. Fits: Husqvarna 357 xp, Jonsered 2156 Turbo

View

Part: 48mm piston kit, includes the wrist pin and keeper clips Condition: new old stock from closed out dealer. Fits: Husqvarna 262

View

Part: 44mm diameter bore top end. Includes: cylinder, piston, ring, wrist pin, clips and bearing. 503968471 Condition: new old stock from closed out dealer. Fits: Husqvarna 50, 50 Rancher Special or Practica

View

Ignition module coil pn# 537038501 new old stock from closed out dealer. Husqvarna 225 r

View

45mm Bore OEM cylinder new old stock from closed out dealer Fits Husqvarna 350, Jonsered 2150 Turbo

View

Part: cylinder 503503902 Condition: new old stock from closed out dealer. Fits: Husqvarna 154 and 254 SE SG XP 254xp

View

Part: cylinder only no piston included. 501 25 02-01. 52mm Condition: new OEM old stock from closed out dealer. Fits: Husqvarna 480cd, 380cd, 380 cd

View

45mm diameter, top end motor kit includes: piston, ring, wrist pin, bearing, and keeper clips, cylinder head. 537253104 New part from closed out dealer Fits Husqvarna model 353 chainsaw, but will fit on 346 XP, 350, 350, 350 EPA, 351, 351 EPA

View

Part: gasket set kit. Husqvarna part # 503 64 72 01 503647201 Condition: new old stock from closed out dealer. Fits: Husqvarna 365, 371, 372, 362 XP SP 371xp 372xp 365sp 362sp. Jonsered 2171, 2071, 2165, 2065, 2063 Turbo

View

Part: piston and cylinder with wrist pin, rings, clips Condition: Cylinder has hardly been used. New piston and ring. Fits: Husqvarna 242 and 42 special

View

Part: 52mm bore OEM cylinder with wrist pin bearing. Part of the complete kit part number 5035029001 Condition: new old stock from closed out dealer. Fits: Husqvarna 181, 281 SE SG

View

Part: 44mm Bore piston and cylinder with ring and wrist pin Part # 503869971 Condition: new, old stock from closed out dealer. Fits: Husqvarna 350 and Jonsered CS 2150 turbo. Will retrofit onto Husqvarna 346xp, 351, 353 & Jonsered 2149, 2152, 2153

View

handle insert 5041063 good used shape Fits Husqvarna 545, 550 xp.

View

Part: air duct. part # 503 54 26-02 503 54 32-01 Condition: New old stock OEM part Fits: Husqvarna 262 XP

View

Part Name: carburetor support mount, part # 503 86 64-01 503 86 64-02 Fits the Following Models: Husqvarna 340, 345, 350 Jonsered 2141 2150 2145 turbo New old stock from closed out dealer.

View

retaining ring 506287601 New part from old stock dealer Fits Husqvarana 371K cut off saws

View

Part: gasket Part #503447701 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 238, 44, may also fit other models Location: Bin H-50

View

Part: top cover / engine shroud for hd Condition: good used/working shape. Has a small hole in top. Fits: Husqvarna 575xp, 570 , 576 xp auto tune saws

View

Part: Ignition switch cable wire Part number: 501634403 Condition: new old stock from closed out dealer Fits: Husqvarna 254 261 262

View

Part: Filter mount air intake. PN 503869401 Condition: new old stock from closed out dealer. Fits: Husqvarna 350, 345, 340

View

Half wrap front top handle for heated handles 503 66 04-01 NEW OEM Fits Husqvarna 262 xpg

View

Sparkplug cover plate 5373903 NEW oem from closed out dealer. Fits Husqvarna 334 335 338 XPT 334xpt 335xpt 338xpt and others

View

Part: clutch sprocket bearing 503255201 Condition: new old stock from closed out dealer Fits: Husqvarna 350, 345, 340, 346xp, 353, 351, 445, 455 Rancher and others

View

Part: intake flange 544328301 Condition: new old stock from closed out dealer. Fits: some models of Husqvarna 340, 345, 350

View

Part: Throttle link push rod and grommet. 501778002 Condition: New old stock from closed out dealer. Fits: Husqvarna 50, 51, 55, 55 Rancher

View

Part: muffler exhaust gasket Part # 503 82 11-01 Condition: new old stock from closed out dealer. Fits: Husqvarna 335 xpt, 334T,

View

Oil pump rubber line Part number 545 03 71-01 New OEM part Fits Husqvarna 137 171 142 136 and others

View

Part: air filter mount, part # 537009101 Condition: new old stock from closed out dealer Fits: husqvarna 385xp 390 Jonsered CS-2186 CS 2186 CS2186

View

Clutch and oil pump dust protection washer cover. Husqvarna part number 501 83 17-01 NEW old stock from closed out dealer. Fits Husqvarna 61, 61 Rancher, 162, 266se, 266sg, 266 se sg xp, 266xp, 268, 272, 272xp, 66. Jonsered 630 625 670 series

View

Chainbrake clutch cover brake assembly with mechanism. 544217201 NEW from old dealer stock. A little dusty/dirty from years of storage. Fits some models of Husqvarna 340 345 350 450 455 rancher

View

Part: starter recoil cover with pulley, spring, grip. 544 28 70 504 59 70-02 Condition: NEW old stock from closed out dealer. Fits: Husqvarna 435

View

Clutch cover 503 76 92-01, 503769201 NEW old stock from closed out dealer. Must have come off a new saw that was taken apart since you can see where the bar nuts were. Dusty/dirty from years of storage. Fits Husqvarna 362 sp special 362xp 362 xp with the narrow mount bar

View

Part: clutch sprocket cover with chain tensioner assembly 537 03 35-01 537 00 40 Condition: New old stock from closed out dealer. Has a few slight scratches / dings from years of storage. Fits: models of Husqvarna 371, 372, 371xp, 372xp, 365, 365sp

View

Part: top cover 5370007 537 00 08 Condition: New old stock from closed out dealer Fits: husqvarna 385xp

View

Part: throttle rod link grommet Part # 537260401 Condition: new old stock from closed out dealer Fits: Husqvarna 455 460 rancher

View

Part: clutch sprocket bearing 503 25 52-01 Condition: New old stock from closed out dealer. Fits: Husqvarna 350, 345, 340, 346xp, 353, 351, 445, 455 Rancher and others

View

Complete clutch cover chain brake, chainbrake assembly. 525 74 33 03, 525743303 NEW. Has a few scratches/scuffs from storage. Fits Husqvarna 562xp 562 xp

View

Part: clutch sprocket cover with chain tensioner assembly and chain brake assembly, 501846101 Condition: new old stock from closed out dealer. Fits: Husqvarna 550 XP, 550XP II, 550XPG, 560XP, 560XPG

View

Part: top cover engine shroud 503 61 00-03 Condition: good used/working order. small scuffs, very slight muffler melt that does not affect appearance. good color, no fade, and nice "300 badge" Fits: Husqvarna 268 and some models (late) of 61

View

Top cover. Husqvarna part number 501 68 60-01, 501 68 61 In good, solid used shape, good color, no cracks Fits Husqvarna 266 se sg xp, 266XP, 266SE, 266SG, 66, Older model 61, 61 Rancher, 61 Practica, 268xp, 268 xp. Older saws only with air filters that are held on with 2 slotted aluminu...

View

Part: Bar stud / bolt. Part # 503 87 54-01 Condition: new old stock from closed out dealer. Fits: Husqvarna 350, 345, 340

View

Top cover winter/summer air baffle plug insert 503526101 New old stock. May be gray or tan. Fits Husqvarna 261 262 xp

View

Part: air filter - nylon non screw on type 503 60 83 Condition: good used/working shape Fits: some models of Husqvarna 51, 55

View

Part: chainbrake, clutch sprocket cover with brake band, spring, cover, chain tensioner adjuster. Part # 537 28 63-01 Condition: good used/working shape. Has some minor chipping of clutch cover and gouging in plastic parts. Fits: Husqvarna 455 rancher, 460

View

Part: fuel tank rear trigger handle with the 6 av buffer mounts, cap, throttle trigger, and safety interlock lever. 501 53 42 Condition: good used/working order. Fits: some models of Husqvarna 61 and others

View

← 1 … 20 21 22 23 24 … 40 →