(1 in stock)
jonsered 2150 turbo chainsaw muffler heat shield
Part: muffler heat shield Condition: good used/working shape Fits: Jonsered 2150 Turbo
jonsered 2150 turbo chainsaw fuel tank rear trigger handle #1 with trigger and safety
Part: fuel tank/rear trigger handle with throttle trigger and safety Condition: good used/working shape-no leaks Fits: Jonsered 2150 2141 2145 2152 Turbo
(1 in stock)
Jonsered 451 E, EV Chainsaw Bar Plate Set
Part: Bar plate set Condition: Good used/working shape Fits: Jonsered 451 E, EV
(3 in stock)
jonsered 90 chainsaw filter mount and bolts
Part: filter mount and bolts 504 35 86-03, 504358603 Condition: good used/working shape Fits: Jonsered 90, 801
(3 in stock)
jonsered 2055 turbo chainsaw oil pump cover
Part: oil pump cover 503 18 58-01 Condition: good used/working shape Fits: Jonsered 2055, 2054, 2051 Turbo
Jonsered 90 Chainsaw Air Filter Nut
Part: Air filter nut. PN 504 02 47-08 Condition: Good used/working shape Fits: Jonsereds 90
(1 in stock)
jonsered 90 chainsaw idle speed screw
Part: idle speed screw. 723 12 97-40, 504 21 65-00 Condition: good used/working shape Fits: Jonsereds 90 80 70e 621 and others
Jonsered 2065 Chainsaw Intake Manifold Boot
Part: Intake manifold boot Condition: Good used/working shape Fits: Jonsered 2065
Jonsered 2149 Turbo Chainsaw Intake Manifold Boot
Part: Intake manifold boot Condition: Good used/working shape Fits: Jonsered 2149 Turbo
Jonsered 2149 Turbo Chainsaw Ignition Coil
Part: Ignition coil Condition: Tested and works Fits: Jonsered 2149 Turbo
Jonsered 451 e ev Chainsaw Tank Vent
Part: Tank vent line Condition: good used/working shape Fits: Jonsered 451e, 451ev
Jonsered 451 E, EV Chainsaw Flywheel Key
Part: Flywheel Key Condition: Good used/working condition Fits: Jonsered 451 E, EV
Jonsered M36 M-36 Shortblock-Piston-Cylinder-Crank
Complete shortblock assembly. This includes: Piston, Cylinder, rod, crank, bearings, bottom end. In good used shape. Good piston and cylinder not scored or cracked. Bottom end is tight without too much play. Fits jonsered M36.
(3 in stock)
Jonsered M-36 361 Chainsaw Fuel & Oil Cap Set
Part: fuel / gas and oil cap set Condition: good used, working shape Fits: M36 and 361, Jonsereds
Jonsered M-36 361 365 Chainsaw Air Filter
Air filter. In good used shape, not clogged or ripped. Fits jonsered M36 361 and 365.
Jonsered 90 Chainsaw Air Filter used #1
Part Description: air filter Fits the Following Models: 90 Detailed Condition Description: useable shape-has been patched as visible in the picture
Jonsered Jonsereds 80 Chainsaw Oil Pump Oiler
Automatic Oiler Oil pump only. 504 81 16-01, 504811601, 504 811601 In good working order. Fits jonsereds 80 801 90 and others
(4 in stock)
Jonsered 625, 630, 670 Chainsaw Clutch Rim sprocket only (no rim) #1
Part Name: rim drum/sprocket Part Description: good used/working shape Fits the Following Models: some models of Jonsereds 625, 630, 670
Jonsered 625, 630, 670 Throttle Safety Latch
Trigger Safety release lever. Fits Jonsered 626, 630, 670. Part # 501 77 33-01. Good used shape with no breaks.
Jonsered Jonsereds 49sp, 50, 51 Chainsaw red Air Box
Air box. In good used shape with no breaks, has some paint loss-some are red in color and some are black in color. Fits Jonsered 49 SP, 50, 51 may also fit some other models. PN 504 60 20-09
(3 in stock)
Jonsered Jonsereds 361 Chainsaw Cylinder
Part Name: clyinderPart Description: In good used shape, no breaks-not scoredFits the Following Models: Jonsered 361
Jonsered 910 E EV Chainsaw Throttle Lock and spring
Part Name: throttle lock. PN 504 38 66-01 Condition Description: in good used shape-no breaks Fits the Following Models: Jonsered 910e, 910ev
Jonsered 670 Chainsaw fuel Tank Trigger Handle kit for Recirculating Carbs #3
Part: fuel /gas tank with the throttle trigger, safety lever interlock and handle covers. 501 77 27-04 Condition: good used/working shape Fits: Jonsered 670 Chainsaws which have recirculating carburetors
Jonsered 621, 80 Chainsaw Filter mount
Part: filter mount. Part # 504 35 77-01 Condition: good used/working shape Fits: Jonsered 621, 80
Jonsered 525 535 Chainsaw Throttle Link
Part Name: throttle linkCondition Description: in good used shape-no breaksFits the Following Models: Jonsered 525 535
(1 in stock)
Jonsered 521E 521 E Chainsaw Flywheel w/Starter Pawls
Part Description: flywheel with starter pawls and springsDetailed Condition Description: good used shape, no breaksFits the Following Models: 521E
(2 in stock)
Jonsered 520 SP Chainsaw Crankshaft, Crank Rod Bearings #1
Part: crank shaft with connecting rod and bearings Condition: good used/working shape Fits: Jonsered 520sp
Jonsered 52 E, 521 ev Chainsaw black Top Cover -- Engine Shroud
Part: top cover shroud Condition: good used/working shape Fits: Jonsered 52E, 521EV
Jonsered 510 SP Chainsaw Clutch Cover Hand Guard #3
Part Name: Clutch cover with hand guard. This is a stationary hand guard, there is no provision inside the clutch cover for a chainbrake. This is used on older 510SPPart Description: In good solid shape, not cracked broken or melted.Fits the Following Models: Jonsered 510 SP
(2 in stock)
Jonsered 510 SP Chainsaw crankcase tank assembly
Part: crank case tank assembly Condition: good used / working shape, no breaks Fits: Jonsered 510sp
Jonsered 49sp to 52e Chainsaw Right Trigger Handle Half
Part Name: right rear trigger handle housing half. Part # 504 65 55-00 Conidtion: good used/working shape Fits the Following Models: Jonsered 49sp, 50, 51, 52, 52E
Jonsered 49sp, 50, 51, 52, 52e Chainsaw rear handle bottom half (right side)
Part Name: Lower right handle half for the rear handle. part # 504 65 57-04 Part Description: Good used/working shape Fits the Following Models: Jonsered 49 sp, 50, 51, 52, 52E
Jonsered 49SP 50 51 52 carburetor bolt set and plate
Carburetor bolts with plate, part # 725 23 41-85 and 504 35 76-01 Fits 49SP 50, 51, 52 52E and 521 jonsered models
Jonsered 49SP to 52 series Starter recoil cover only
Part: starter housing cover only Condition: good used/working shape. Faded. Fits: Jonsered 49 sp, 50, 51, 52, 52e
Jonsered 451 E Chainsaw Brake Mechanism
Part Name: Brake mechanismDetailed Condition Description: good working shapeFits the Following Models: Jonsered 451 EThis is a USED part, in good working order.
Jonsered 370 Chainsaw Ignition Coil
Electronic Ignition coil. 507 43 33-68, 507 433368 Tested working good. Fits jonsered 370 and Husqvarna
Jonsered m-36 Chainsaw Ignition Coil for Points
Part: coil for points Condition: good used shape, tested and works Fits: Jonserds M36
(3 in stock)
Jonsered m36, 361 Chainsaw Trigger Handle Cover
Part: trigger handle cover Part Number: M-101055, M101055 Condition: good used, working shape Fits: Jonsered M36, 361
Jonsered 2171 Turbo Chainsaw Carburetor Housing
Carburetor carb Housing filter base / mount. Part number 503 62 73-04, 503 62 73 04 Good used/working shape Fits Jonsered 2171, 2165, 2163, 2071, 2065, 2063 Turbo
Jonsered 2054 2055 Chainsaw Clutch Washer & E Clip
Part Name: clutch washer and E clip Condition: good used/working shape Fits: Jonsered 2054 2055 Turbo
(1 in stock)
Jonsered 2051 Starter Pawl Assyembly PN 503-484901 (H-56)
For Jonsered ChainsawsPart Name: Jonsered 2051 Starter Pawl AssebmlyPart Number:503-484901Detailed Condition Description: New old stock part. Never used, a little bit of light surface rust from storage.
Jonsered 2040 2036 Turbo Chainsaw Bar Tensioner/Adjuster
Part: bar/chain tensioner Condition: good used/working shape Fits: Jonsered 2036, 2040
Jonsered 2040 Turbo Chainsaw Air Filter Assembly
Part Name: filter assembly Detailed Condition Description: good used shape with no breaks Fits the Following Models: Jonsered 2040 Turbo This is a USED part, in good working order.
(1 in stock)
Jonsered 2036 Turbo Chainsaw Recoil Starter Cover Only
Part: starter housing cover Condition: good used/working shape Fits: Jonsered 2036
(1 in stock)
jonsered 2171 turbo chainsaw fuel tank rear trigger handle assembly new oem 503 71 91-71 (LOC: MGSFU)
Part: fuel tank handle housing with throttle trigger, cable, and safety interlock lever Part # 503719171 Condition: New old stock from closed out dealer. May be a slightly darker red from years of storage. Fits: Jonsered 2172 2171 2071 2065 2165 Turbo
Jonsered 670 chainsaw cylinder (with boot type intake) new Mahle (upstairs)
Part: 50mm bore cylinder 503 17 29-04 Condition: new old stock from closed out dealer. Fits: Jonsered 670 and 625 models which have boot type intake
Jonsered 2149 2152 Chainsaw top cover 537 03 32-04 new OEM (JN-AAB)
Snap on style top cover. Jonsered part number 537 03 32-04 New old stock from closed out dealer. Fits 2149 2152 Turbo older models without fuel primer
Jonsered 2071 Turbo Chainsaw ID Tag Decal 503-705801 (H-10)
ID tag decal sticker 503705801 503 70 58 01 new old stock from closed out dealer Jonsered 2071 Turbo
(2 in stock)
Jonsered 2077 Turbo Chainsaw Oil cap new 501 62 66-01 (J-01)
Bar oil tank filler cap assembly 501626601 New old stock from closed out dealer. May be black or gray, you will receive what we have available. Fits Jonsered 2077 2083 Turbo Husqvarna 238
husqvarna 61 to 272 series & Jonsered 625-670 chainsaw oil seal new pn 503 26 02-04 (h-14)
Part: oil seal. Husqvarna Part # 503 26 02 04, 296 52 59-16 Condition: new old stock from closed out dealer. Fits: Husqvarna 61, 162, 266, 268, 272 272xp 268xp 266xp 480 480cd & Jonsered 625, 630, 670
Jonsered 621 Chainsaw Bottom Rear Handle Support 504 65 54-01
Rear handle support bottom. 504655401 Good used shape Fits Jonsereds chainsaw models: 621
jonsered 2171 2165 turbo chainsaw crankcase half flywheel side
Part: crank case half, left flywheel side Condition: good used/working shape Fits: jonsered cs2171 turbo cs2165
jonsered 621 chainsaw muffler bolt set and strap
Part: muffler bolts and strap. PN 725 23 43-85 and 504 18 88-00 Condition: good used/working shape. Corners may be cracked or missing, but still usabale. Fits: Jonsered 621 chainsaws
jonsered cs 2159 Turbo chainsaw starter recoil cover and pulley assembly #2
Part: starter cover with pulley/ rewind spring. Pn 537 00 98-01, 537 06 59-01, 537 09 31-01 Condition: good used/working shape. Has a couple of broken grills. We have more than one of these with a few grills broken so photo is for reference only. May or may not include decal. Fits: Jonsered CS215...
husqvarna 365, 371, 372, 362 & Jonsered 2171, 2071 + chainsaw cylinder gasket new PN 503 90 99-01 (H-0015)
Part: cylinder base head gasket part # 503909901 Condition: new from old dealer stock Fits: Husqvarna 365, 371, 372, 362 XP SP 371xp 372xp 365sp 362sp. Jonsered 2171, 2071, 2165, 2065, 2063 Turbo
jonsered 2083, 2077 turbo chainsaw air filter cover #1
Part: air filter cover, part # 503 43 31-12 Condition: in good used shape Fits: Jonsered 2083, 2077 turbo
Jonsered 450 muffler gasket (j-02)
PART: EXHAUST GASKET, 503 15 39-01 CONDITION: New, OEM, from closed out dealership FITS: JONSEREDS 455, 450, 535
Jonsered 590 Chainsaw Closed Port Piston Kit 503 16 87-01 NEW (I600)
45mm piston and ring kit for closed port cylinders. 503168701 NEW from old dealer stock Fits Husqvarna 55. Jonsered 590
Jonsered 111s Complete Original Chainsaw
Complete Jonsereds 111s 111 Super In good intact complete shape Last ran about 10 years ago before we hung it up on display
Jonsered 2094 Turbo Chainsaw Large Inner Spike 506 16 74-01 NEW (I600)
Large oversize west coast inner felling spike dog dawg. 506167401 NEW from old dealer stock Fits Jonsered 2094 2095 Turbo
Jonsered 70e, 621, 820, 930 Chainsaw Tensioner Nut NEW 504 59 15-00 (H-0014)
Tensioner nut/pin. 504591500 New part from old dealer stock Fits Jonsered chainsaw models: 70 E, 621, 820, 930
Jonsered M-36, 361, 365 Chainsaw Clutch Spring NEW 507-100246 (J-04)
Clutch spring. M-100246 New part from old dealer stock Fits Jonsered models: M36, 361, 365
Jonsered 621 Chainsaw Cover NEW 504 11 11-00 (J-03)
Cover. 504111100 New part from old dealer stock Fits Jonsereds models: 621
Jonsered 90 Chainsaw Piston Assembly
Piston with rings and pin. 504 41 00-05, 504410005 In good used shape Fits Jonsered 90
Jonsered 49sp-52E, 80, 90, 801 Chainsaw AV Buffer Mount 504 12 50-10 (J-03)
AV buffer mount for the crankcase. 504125010 In good working order Fits Jonsereds models: 49 SP, 50, 51, 52, 52 E, 80,90, 801
Jonsered 625, 630 super, 2065, 2165 Chainsaw 48mm Piston Ring NEW 503 28 90-15 (J-01)
48mm piston ring. 503289015 New part from old dealer stock Fits Jonsered chainsaw models: 625, 630 Super, 2065, 2165 Turbo
Jonsered 621 Chainsaw Bottom Rear Handle Support NEW 504 65 54-01 (J-01)
Rear handle support bottom. 504655401 New part from old dealer stock Fits Jonsereds chainsaw models: 621
jonsered 920 chainsaw ignition module 503 15 40-01 new (D803)
new module part # 503154001 new old stock part fits Jonsereds 920
(1 in stock)
jonsered 361 chainsaw tank gasket 507-100042 new oem (D803)
tank gasket part # 507 10 00-42 new old stock part from closed out dealer fits Jonsered 361 chainsaws
jonsered chainsaw top cover buckle 503 89 47-02 new oem (h-007)
top cover buckle clip part # 503894702 new old stock part from closed out dealer fits Jonsered cs 2245, 2245 s, 2250 s and some other models
jonsered 625, 630, 670 chainsaw starter recoil cover 501 77 31-06 new (JN-AAB)
Starter recoil housing cover only Part # 501773106/ 501-773106 New old stock part from closed out dealer-heavy dust from years of storage Fits Jonsereds 625, 630, 670 models
jonsered 910 chainsaw right rear trigger handle half 504 65 55-08 new (JN-AAB)
Rear trigger handle half, right side Part # 504655508 / 504-655508 New old stock part from closed out dealer Fits Jonsereds 910 910e chainsaws
Jonsered 49sp, 66e, 70e Chainsaw Cover 504 11 07-03 (J-002)
Cover. 504110703 Fits Jonsereds models:70 E, 49 SP, 66 E
(1 in stock)
jonsered m36, 361, 365 chainsaw starter pulley 507-100072 new oem (A-1101)
Starter pulley Part # 507100072 / 507 10 00-72 new old stock part from closed out dealer Fits Jonsereds M36, 361, 365
jonsered 450 to 535 series chainsaw brake band 504 98 34-53 new oem (n-005)
brake band 504983453 / 504-983453 new old stock part from closed out dealer fits Jonsereds 450, 455, 525, 520, 535
jonsered 2094 chainsaw switch with lead 506 16 89-02 new (N-101)
Switch and lead wire part # 506168902 / 506-168902 new old stock part from closed out dealer Fits Jonsereds 2094
Jonsered 2051, 2055, 2054 chainsaw starter pulley 503 64 18-01 new oem (N101)
starter pulley rotor Jonsereds part # 503641801 /503-641801 new old stock part from closed out dealer. Dusty/dirty from years of storage and has some old grease on it. fits Jonsereds 2051, 2054, 2055
(2 in stock)
jonsered 2051, 2054, 2055 chainsaw starter cover only 503 64 17-02 new (JN-AAB)
Starter housing cover only Jonsereds part # 503-641702/ 503641702 new old stock part from closed out dealer. May be dusty/dirty from years of storage. May not include small rubber buffer/sleeve. fits Jonsered 2051, 2054, 2055 turbo chainsaws
(1 in stock)
jonsered 2065, 2165 chainsaw top cover shroud 503 69 74-01 new (JN-AAB)
Top cover engine shroud Part # 503-697401 / 503697401 new old stock part from closed out dealer, dusty from storage Fits Jonsered 2065, 2165 chainsaw models
jonsered CS 2150 chainsaw hand guard 537 01 21-02 new oem (JN AAB)
Brake handle, hand guard. Jonsered part number 537012102, 503 96 00 new old stock part from closed out dealer Fits Jonsered CS 2141, CS 2145, CS 2150
Oregon Double Guard 16" Sprocket Tip Chainsaw Bar for Homelite - Jonsered NEW 160GDDD096 (RDFB)
Oregon Double Guard Guide Bar. Made in USA. 16" laminated sprocket nose. 3/8 pitch, .050 gauge, takes a 60dl chain (available here: https://store.chainsawr.com/products/oregon-72lgx-3-8-16-chain-60dl ) Fits many Homelite models: Alpina/Castor A-70, CP-55, CP-56, CP-65, CP-66, CP-70, PR...
Jonsered 2186 Chainsaw Carburetor Housing Base
Carburetor and air filter housing carb base. 537 00 14-04, 537001404 In good used shape Fits Jonsered CS 2186 2188 Turbo CS2186 CS2188
Jonsered 2186 Chainsaw Starter Assembly
Starter recoil rewind cover assembly device. 537 16 83-71, 537168371 In good used shape. May not have decal or fasteners. My have a few broken grills. Still functional. Fits Jonsered CS 2186 2188 Turbo CS2186 CS2188
Jonsered 2188 Turbo Chainsaw Air Filter and Top Cover Set
Air filter, cylinder, carburetor and top cover set. 537 16 82-01, 537168201, 537 16 80-01, 537168001 In good used shape Fits Jonsered 2186 2188 Turbo CS2186 CS2188
Jonsered 70e, 66e chainsaw av buffer mount for the handle bracket 504 12 50-12 NEW (Box Y)
Part: av buffer mount Part # 504 12 50-12 Condition: NEW old stock part Fits: Jonsereds 70 e and 66 e
Jonsered 490 + chainsaw chain tensioner adjuster 505 23 09-02 NEW (Box B)
Part: chain adjust screw and pin with clip. Part #s 505 23 09-02 & 505 26 78-95, Condition: NEW Location: Partner 500, 5000. Jonsered 490 590 2045 2041 2050. Husqvarna 40 45 49
Jonsered 2260 Turbo Chainsaw Ignition Module 581 72 34-01 NEW (H-66)
Electronic ignition coil module. 581723401, 581 72 34 01 NEW Fits Jonsered CS 2260 2258 Turbo, CS2258 CS2260 Turbo. Husqvarna 555 562xp 562. From serial number s/n 2012.1401173 on. 20121401173+ Look at the wire harness on your old coil and be 100% sure that the plugs and number of wires...
(1 in stock)
Jonsered 2260 Turbo Chainsaw Top Handle 579 24 67-01 NEW (Bulky L1)
Standard half wrap, flush cut, top handle. 579 24 67-01, 579246701 579 24 67-03 NEW Fits Jonsered 2258 2260 Turbo
Jonsered 2260 Turbo Chainsaw Fuel Tank 575 38 22-06 NEW (Bulky L1)
Fuel gas tank rear trigger handle assembly. 575 38 22-06, 575382206 NEW Fits Jonsered 2258 2260 Turbo
Jonsered 630 Chainsaw Top Cover Stud
Top and air filter cover shroud stud. 503 20 82-04 In good used shape Fits Jonsered 625 630 670 Series
Jonsered 910 Chainsaw Cylinder Side AV Mount
Cylinder side av handle mount rubber buffer. 504 12 50-29 In used, intact usable shape Fits Jonsered Jonsereds 910 e ev 910e 910ev
Jonsered 2159 turbo chainsaw crankcase half (Right, clutch side)
Part: Right, clutch PTO side of the crank case housing Condition: good used/working shape Fits: jonsered 2159 turbo
Jonsered 451e Chainsaw Starter Spring and Cassette
Starter recoil rewind spring and cassette holder. 504 21 00-17 In good used shape Fits Jonsereds 451e 451ev 451 e ev
Jonsered 451E Chainsaw Piston and Cylinder Set
Top end motor kit includes: cylinder head, piston, ring, wrist pin, and bearing. 504 42 00-13 In good used shape Fits Jonsered Jonsereds 451e 451ev 451 e ev
Jonsered 2077 Turbo Chainsaw Crankcase Assembly
Crankcase assembly with both case halves, crankshaft. 503 42 00-10 In good used shape Fits Jonsered 2077 2083 Turbo
Jonsered 2055 Turbo Chainsaw Flywheel
Flywheel fan rotor with starter pawls and springs. 503 52 18-01 In good used shape Fits Jonsered 2055 Turbo
Jonsered 52E Chainsaw Clutch Bushing
Clutch bearing bushing. 504 52 19-02 In good used shape Fits Jonsereds 52e 49sp 52 51
Jonsered 2077, 2083 chainsaw clutch side cover (poor condition)
Part: clutch sprocket cover, part number 503 89 97-02 Condition: usable condition with some cracks Fits: Jonsered 2077, 2083 turbo
jonsered 621 chainsaw cylinder and intake manifold
Part: cylinder and intake manifold with gasket. 504 42 19-00 Condition: Good used/working shape. Came off a saw with good compression. Fits: Jonsereds 621