We specialize in older jonsered chainsaws. We can identify your old jonsered chainsaw if you don’t know what it is. Tons of parts for the older all metal constructed models of jonsered. 50 51 52 52E 49sp 521 621 70E 80 90. We also have used chainsaw parts for newer turbo models and models from the 1980’s like 520 sp and 510 sp.
Sold Out!
Part: ignition coil module with wires
Part # 573 93 57-01, 510 10 15-01
Condition: good used/working order
Fits: Jonsered cs 2245, 2245 s, 2250 s, 2240 and some Husqvarna models
View
$22.00
Sold Out!
Part: hardware for the clutch - includes everything pictured
Part # 504 23 31-00, 504 52 22-01, 504 18 44-00, 504 04 15-00
Condition: good used/working order
Fits: Jonsereds 70 e and 621
View
$6.50
Sold Out!
Part: starter / recoil housing cover
Part # 503 67 83 01
Condition: good used/working shape, has a few cracked grilles
Fits: Jonsered 2054, 2055 turbo
View
$27.99
Sold Out!
Part: air filter mount / intake elbow with carburetor support connector
Part # 504 35 86-10, 503 53 65-02
Condition: good used/working shape
Fits: some models of Jonsereds 670, this model came with a few different types of filter mounts.
View
$10.00
Sold Out!
Woodruff key
In good used shape
Fits Jonsered M-36, M36, 361, 365, Skil 16 series, Partner Mini and others
View
$1.95
Sold Out!
Part: piston with ring, wrist pin, bearing and keeper clips
Condition: good used/working order
Fits: Jonsered 2071 turbo
View
$24.00
Sold Out!
Part: container holder for the rewind spring
Condition: good used/working order
Fits: Jonsereds 49 sp, 50, 51, 52, 52e
Part # 504 11 12-01
View
$4.50
Sold Out!
Part: zama c1q el5a carburetor
Condition: good used physical shape. May need a carb rebuilt kit
Fits: Jonsered 2045 turbo
View
$27.00
Sold Out!
Part: intake manifold air filter to carburetor connector boot with support brace and bolts
Part # 506 15 90-01, 506 13 34-02, 725 53 43-55
Condition: good used/working shape
Fits: Jonsered 2095 turbo
View
$15.00
Sold Out!
Part: inner flywheel magneto 504 62 00-01
Condition: good used/working shape
Fits: Jonsereds 52 50 51
View
$35.00
Sold Out!
Part: choke rod lever
Part # 503 40 35-01
Condition: good used/working shape
Fits: Jonsered 930
View
$7.99
Sold Out!
Part: .325-7T spur sprocket drum, mechanism (shoes, springs, and spider rotor) with bearing
Part # 503 87 30-72, 503 81 59-01
Condition: good used/working shape
Fits: Jonsered 2141, 2145, 2150 turbo
View
$25.00
Ready to ship (3 in stock)
Part: rewind spring container / holder cassette
Part # 504 11 12-00
Condition: good used/working order
Fits: Jonsereds 621, 70 e
View
$4.50
Sold Out!
Part: rear trigger handle cast half, right side
Part # 504 65 55-00
Condition: good used/working order
Fits: Jonsereds 80 and 90
View
$8.00
Sold Out!
Part: air filter, air filter cover, top cover, filter mount and air filter for conversion of these models to take a readily available air filter.
Part # 504 60 20-47, 503 15 29-01, 503 77 39-01, 503 15 93-01
Condition: good used/working shape
Fits: Jonsereds 920 and 930
View
$86.00
Sold Out!
Part: chainsaw brake cover
Part # 503 89 07 02
Condition: good used/working shape
Fits: Jonsered 2141, 2145, 2150 turbo
View
$3.00
Sold Out!
Part: flywheel with starter pawl/spring/stud set
Part # 506 03 13-01
Condition: good used/working shape
Fits: Jonsereds 490 590
View
$19.95
Sold Out!
Part: ignition coil
Part # 506 02 72-01
Condition: good used/working shape. Tested and works with strong spark
Fits: Jonsered 490, 590, Husqvarna 50
View
$29.95
Ready to ship (1 in stock)
Part: air filter base horn
Part # 503 41 31-01
Condition: good used/working shape
Fits: Jonsered 2045, 2050, 2041 turbo
View
$5.00
Sold Out!
Part: hose line
Part # 544 33 10-01
Condition: good used/working shape
Fits: Husqvarna 346xp, 353 and Jonsered cs 2153 and 2152
View
$3.99
Sold Out!
Part: muffler bolts and heat shield
Part # 506 16 91-01, 725 53 85-55, 503 20 03-12
Condition: good used/working shape
Fits: Jonsered 2095 turbo
View
$7.00
Sold Out!
Part: bar plate
Part # 506 16 69-01
Condition: in good used shape
Fits: Jonsered 2095 Turbo
View
$9.95
Sold Out!
Part: air filter cover with knob
Part # 506 15 35-01, 506 13 39-01
Condition: in good used shape
Fits: Jonsered 2095 turbo, some parts may interchange with 2094
View
$17.50
Ready to ship (1 in stock)
Part: key for the flywheel 735 80 15-00, 735801500
Condition: good used/working shape
Fits:Jonsereds 49 sp, 50 52e 51 52 521ev 621 70e 66e 801 80 90
View
$5.99
Sold Out!
Part: chain tensioning screw and adjuster pin
Part # 501 79 27-01
Condition: good used/working shape
Fits: Jonsered 2095 turbo
View
$9.95
Ready to ship (3 in stock)
Part: clutch rim sprocket drum (used) with a new, replaceable rim
Condition: good used/working shape
Fits: some models of Jonsered 625, 630, 670
View
$14.99
Ready to ship
Part: crank case engine housing gas, bar oil and fuel tank chassis with bar stud / bolt set 503 40 07-01
Condition: good used/working shape
Fits: Jonsereds 455, 535, 525, 450
View
$38.00
Ready to ship
Part: oil pump oiler with worm gear and screw
Part # 504 81 10-14, 504 81 10-16, 504 02 53-01, 504 02 52-01
Condition: good used/working shape
Fits: late model (newer) Jonsereds 451e, 451ev
View
$25.00
Ready to ship (1 in stock)
Part: crank shaft with connecting rod
Condition: good used/working shape
Fits: Jonsered 920
View
$29.95
Sold Out!
Part: chain catcher stop
Part # 504 12 44-04
Condition: good used/working shape
Fits: Jonsereds 910, 920, 930, 830
View
$4.50
Ready to ship (1 in stock)
Part: fuel gas and oil tank filler cap set
Part # 504 70 20-02
Condition: good used/working shape. May or may not have keepers.
Fits: Jonsered 920, 930
View
$9.95
Sold Out!
Part: brake handle hand guard part # 504 98 34-73
Condition: good used/working shape
Fits: Jonsereds 920, 930, 820
View
$29.95
Sold Out!
Part: tank vent
Condition: good used/working shape
Fits: some models of jonsered 525, 535
View
$5.99
Sold Out!
Part: hand guard
Condition: good used/working shape. Faded and has a corner chip
Fits: Jonsered 49 sp, 50, 51, 52, 52e
View
$15.99
Sold Out!
Part: bucking spike dawg
Part # 503 42 66-01
Condition: good used/working shape
Fits: Jonsered 2077, 2083 II Turbo
View
$9.95
Sold Out!
Part: air filter cover and nut
Condition: good used/working shape
Fits: jonsered 80
View
$15.00
Ready to ship (2 in stock)
Part: tank vent valve, part # 503 16 40-01 5
Condition: good used/working shape
Fits: Jonsered 2083 II, 2077 turbo, 535 and others
View
$5.00
Ready to ship (1 in stock)
Part: fuel / gas tank cap
Condition: good used/working shape
Fits: Jonsered 2077, 2083 II turbo
View
$4.99
Ready to ship (4 in stock)
Part: throttle link rod with guide, part # 503 43 48-01 and 503 43 60-01
Condition: good used/working shape
Fits: Jonsered 2083, 2077 turbo
View
$5.00
Sold Out!
Part: carburetor bolts. Part # 503 20 23-55
Condition: good used/working shape
Fits: jonsered 2077, 2083 turbo
View
$3.95
Ready to ship (1 in stock)
Part: nylon air filter, part # 537 02 40-01
Condition: good used/working shape
Fits: jonsered 2141, 2145, 2150 turbo
View
$5.00
Ready to ship (3 in stock)
Part: hardware - screw/bolt for the top handle
Condition: good used/working shape
Fits: jonsered 70 e
View
$4.50
Sold Out!
Part: brake spring for the chainbrake, part # 503 46 59-01
Condition: good used/working shape
Fits: jonsered 2159 turbo
View
$4.50
Sold Out!
Part: hand guard (503 11 84-01) and arm (504 98 34-50)
Condition: good used/working shape
Fits: Jonsered 450, 455, 535 and some other models
View
$19.95
Sold Out!
Part: ignition coil
Condition: good used/working shape. tested and makes strong spark
Fits: jonsered 2159 turbo
View
$25.00
Sold Out!
Part: flywheel kit - includes the outer flywheel fan, the inner flywheel magneto and the starter pawl set
Condition: good used/working shape with no broken fins
Fits: jonsereds 52
View
$50.00
Sold Out!
Part: starter rewind spring. part # 503 43 19-01
Condition: good used/working shape
Fits: jonsered 2077, 2083 turbo
View
$7.50
Sold Out!
Part: fuel tank rear trigger handle. Includes the throttle cable, fuel cap, 1 spring av mount, throttle trigger and safety interlock lever, fuel line and filter
Condition: has two cracks of the handle housing, near the throttle trigger but is in usable shape with no leaks.
Fits: jo...
View
$65.00
Sold Out!
Part: oil pump oiler, part # 503 19 05-01
Condition: good used/working shape
Fits: some models of Jonsered 2054, 2055 Turbo, these oil pumps came in two different styles, so check yours to make sure it matches.
View
$24.99
Sold Out!
Part: oil line (503 18 61-01), grommet (503 18 62-01)
Condition: good used/working shape
Fits: Jonsered 2051, 2054, 2055 turbo
View
$6.99
Sold Out!
Part: fuel/ gas tank with cap, 2 av spring mounts, fuel line and filter, throttle trigger and safety interlock lever. Part #s 503 92 31-01, 503 85 41-01, 503 85 45-02, 503 85 44-02, 503 57 76-02, 503 44 32-01
Condition: good used/working shape
Fits: Jonsered 2159 Turbo
View
$78.00
Sold Out!
Part: muffler
Condition: good used/working shape
Fits: Jonsered 2041, 2045, 2050 Turbo
View
$15.00
Sold Out!
Part: set of muffler bolts/nuts. Part #s 503 21 82-01 & 503 22 23-02
Condition: good used/working shape
Fits: Jonsered 2041, 2045, 2050 Turbo
View
$4.50
Sold Out!
Part: piston and cylinder kit, includes the ring, pin, bearing, crankshaft, connecting rod, bearings
Condition: good used/working shape. Came of a saw with good compression, no breaks or scoring.
Fits: Jonsered 2045 Turbo
View
$89.00
Ready to ship (3 in stock)
Part: switch wire
Condition: new, old stock. Dusty from years of storage.
Fits: Jonsereds 70 E
Location: new misc. parts bin #3, box 515
View
$6.99
Ready to ship (1 in stock)
Part: piston wrist bearing, pin, seals and keeper clips
Condition: good used/working shape
Fits: Jonsereds 621
View
$7.99
Ready to ship (1 in stock)
Part: carburetor hi lo grommet. Part # 503 63 99-01
Condition: Good used/working shape
Fits: Jonsered 2051, 2054, 2055 turbo
View
$4.50
Sold Out!
Part: carburetor bracket support.
Condition: Good used/working shape
Fits: Jonsered 2054, 2055 Turbo
View
$3.50
Sold Out!
Part: starter/recoil cover only. Part # 501 77 31-06
Condition: Good used/working shape
Fits: Jonsereds 625, 630, 670
View
$15.00
Sold Out!
Part: starter housing cover with pulley and spring
Condition: good used/working shape
Fits: Jonsereds 670 Champ
View
$35.00
Sold Out!
Part: starter housing cover with pulley and spring
Condition: good used/working shape
Fits: Jonsered 66 E
View
$32.00
Sold Out!
Part: air filter cover
Condition: good used/working shape
Fits: some models of Jonsered 451e, 451ev
View
$15.00
Sold Out!
Part: Tillotson HK23E caburetor
Condition: good used physical shape. May need a carb rebuild kit.
Fits: Jonsereds 450
View
$25.00
Sold Out!
Part: rear handle-includes both handle halves, throttle trigger and safety interlock
Condition: good used/working shape
Fits: Jonsereds 450
View
$35.00
Ready to ship (3 in stock)
Part: flywheel shroud cover PN 503 11 31 01
Condition: good used/working shape
Fits: Jonsered 450, 455, 535
View
$5.00
Ready to ship (4 in stock)
Part: air filter clip
Condition: good used/working shape
Fits: Jonsered 2171 Turbo
View
$3.00
Ready to ship (3 in stock)
Part: top handlebar for saws which are equipped for heated handles
Condition: good used/working shape
Fits: Jonsereds 451e/451ev
View
$22.00
Ready to ship (1 in stock)
Part: handle bolt
Condition: good used/working shape
Fits: Jonsered 451 E, EV
View
$6.50
Ready to ship (1 in stock)
Part: flywheel and starter pawls 504 62 37-00, 504623700
Condition: good used/working shape. No broken fins.
Fits: Jonsered 90 , 801
View
$29.95
Sold Out!
Part: throttle cable. PN 530 03 61-41
Condition: good used/working shape
Fits: Jonsered 2036, 2040 turbo
View
$9.50
Ready to ship (3 in stock)
Part: handle av buffer mount element
Part # 504 12 50 21
Condition: new old stock OEM part. Dirty/dusty from years of
storage.
Fits: Jonsered 910
Location: Box C
View
$12.95
Sold Out!
Part: air filter mount / elbow
Part # 503 40 05 02
Condition: new old stock part. Dusty/dirty from years of
sitting in storage
Fits: some models of Jonsered 670
Location: Box Y
View
$9.99
Ready to ship
Part: crankcase bushing
Part # 503 96 70 01
Condition: new old stock part. Dusty/dirty from years of
storage.
Fits: Husqvarna 371, 372, 362, 365. Jonsered 2065, 2165
Location: Box H-40
View
$5.50
Ready to ship (3 in stock)
Part: carb flange
Part # 504 06 00 23
Condition: new old stock part. Dusty/dirty from years of storage.
Fits: Jonsereds 910
Location: Box Y
&nbs...
View
$6.99
Ready to ship (4 in stock)
Part: manifold clip
Part # 504 06 00 24
Condition: new old stock part. Dusty/dirty from years of storage.
Fits: Jonsereds 920
Location: Box Y
View
$5.00
Ready to ship (1 in stock)
Part: rim sprocket / drum
Condition: good used/working shape
Fits: Jonsered 70 E
View
$15.00
Sold Out!
Part: clutch bearing
Fits: Jonsered 510, 520 sp
Location: Jonsered 510 bin
View
$5.99
Ready to ship (1 in stock)
Part: crankcase gasket
Condition: good used/working shape
Fits: Jonsered 361
View
$5.00
Ready to ship (2 in stock)
Part: worm gear
Condition: good used/working shape
Fits: Jonsered 361
View
$5.00
Ready to ship (1 in stock)
Part: air duct horn
Condition: good used/working shape
Fits: JOnsered 2051 Turbo
View
$7.00
Sold Out!
Part: set of bar studs
Condition: good used/working shape
Fits: Jonsered 670
View
$7.00
Sold Out!
Part: starter spring shield and holder
Condition: good used/working shape
Fits: Jonsered 920
View
$6.99
Ready to ship (2 in stock)
Part: flywheel cover shroud 504 60 01-24
Condition: good used/working shape
Fits: Jonsered 510sp, 520sp. May also fit other models
View
$4.95
Sold Out!
Part: mount, part # 503 53 65 02
Condition: good used/working shape
Fits: some models of Jonsered 670 625
View
$4.99
Ready to ship (1 in stock)
Part: air filter
Condition: good used/working shape
Fits: Jonsered CS2159
View
$7.00
Ready to ship (1 in stock)
Part: (1) trigger handle cover filler, part # 503 48 45-02
Condition: good used/working shape
Fits: Jonsered 630, 670
View
$3.99
Sold Out!
Part: clutch cover, includes the brake band, spring and brake cover
Condition: good used/working shape. Has a hairline crack and chip on front center of cover.
Fits: Jonsered 2149 turbo
View
$29.99
Sold Out!
Part: filter housing base
Part # 503 62 73-02
Condition: good used/working shape
Fits: Jonsered 2071, 2063 Turbo
View
$5.99
Sold Out!
Part: left, flywheel side, crank case half
Condition: good used/working shape
Fits: Jonsered 2071 Turbo
View
$21.00
Sold Out!
Part: right, clutch side, crank case half with bar studs
Condition: good used/working shape
Fits: Jonsered 2071 Turbo
View
$30.00
Sold Out!
Part: air filter mount and bolts
Condition: good used/working shape
Fits: some models of Jonsered 630
View
$7.00
Sold Out!
Part: bar stud / bolt
Part # 470820
Condition: New old stock OEM part. May or may not be dusty/dirty/have minor oxidation from years of storage.
Fits: Jonsered 361, 365, M36
Location: Box T
View
$4.99
Sold Out!
Part: flywheel starter pawl
Part # 100081
Fits: Jonsered 361
Location: Box Q
View
$3.99
Sold Out!
Part: clutch bearing and washers
Condition: good used/working shape
Fits: Jonsered 2050 Turbo
View
$4.95
Ready to ship (1 in stock)
Part: rear trigger handle kit, includes the switch, wire, choke slide, choke holder, handle grip cover, throttle trigger
Condition: good used/working shape
Fits: Jonsereds M 36
View
$18.00
Sold Out!
Part: points ignition coil with points and condenser
Condition: good used/working shape-tested and works
Fits: Jonsereds M 36
View
$25.00
Ready to ship (4 in stock)
Part: muffler assembly
Condition: good used/working shape, has light surface rust
Fits: Jonsereds M 36, 361
View
$9.95
Ready to ship (1 in stock)
Part: muffler assembly
Condition: good used, working shape-has minor rust
Fits: Jonsereds M 36, 361
View
$9.95
Ready to ship
Part: carburetor grommet
Condition: good used/working shape
Fits: Jonsered 2040, 2036 Turbo
View
$3.95