Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.
Sold Out!
Part: bar stud bolt
Part # 501 45 43-01
Condition: good used/working shape
Fits: Husqvarna 334 335 335xpt, 338xpt, 338 xpt, 40 Practica, 44, 44 Rancher, 444, 140, 140s, 240, 240s, 340, 340s
View
$4.95
Sold Out!
Part: carburetor bolts/ screws set of 2
Condition: good used/working shape
Fits: Husqvarna 136, 141
View
$3.99
Ready to ship (1 in stock)
Part: guide plate
Condition: good used/working shape
Fits: Husqvarna 136, 141
View
$4.50
Sold Out!
Part: carburetor gasket
Part # 530-019172 / 530019172
Condition: good used/working shape
Fits: husqvarna 136, 141
View
$2.50
Ready to ship (1 in stock)
Part: piston and cylinder with ring, pin, bearing, keeper clip set, base gasket and bolts
Condition: good used/working shape. Came off a saw with good compression. No breaks.
Fits: Husqvarna 268
View
$90.00
Sold Out!
Part: clutch sprocket cover only
Condition: has a few minor cracks, is in usable/working order
Fits: some models of older model (early) 61 and 162 models
View
$19.95
Sold Out!
Part: top wrap handlebar 501 55 71-01
Condition: new, after-market part
Fits: Husqvarna 65 77 L chainsaws
View
$29.95
Ready to ship (4 in stock)
Part: crank shaft with rod 501 81 61-02, 501 81 49-02
Condition: good used/working shape
Fits: Husqvarna 394
View
$49.95
Ready to ship
Part: brake band and lever
Part # 503 75 22-02, 501 87 53-04
Condition: good used/working shape
Fits: Husqvarna 570, 575xp, 576xp, 575 576 xp
View
$5.75
Sold Out!
Part: small spring for the brake
Condition: good used/working shape
Fits: husqvarna 346xp
View
$2.99
Ready to ship (1 in stock)
Part: rubber carb intake boot, part # 503 86 63-02
Condition: good used/working shape
Fits: Husqvarna 346xp
View
$7.50
Sold Out!
Part: set of bolts /screws for the carb. Part # 725 53 09-55
Condition: good used/working shape
Fits: husqvarna 385xp Jonsered 2186
View
$4.50
Ready to ship
Part: (1) muffler bolt / screw
Condition: good used/working shape
Fits: Husqvarna 44, 444
View
$1.99
Ready to ship (1 in stock)
Part: crank case housing half, left flywheel side
Condition: good used/working shape
Fits: husqvarna 281 288 288xp
View
$40.00
Sold Out!
Part: air filter
Condition: good used/working shape
Fits: husqvarna 394 and some other models
View
$4.50
Ready to ship (2 in stock)
Part: cylinder base gasket 501 51 22-04
Condition: good used/working shape
Fits: husqvarna 272 266 61 268 162 XP SE SG 272xp 266xp 268xp 266se 266sg 61 rancher practica. Jonsered 630 625 670 Series
View
$4.99
Sold Out!
Part: brake band, part # 501 79 70-01
Condition: good used/working shape
Fits: husqvarna 42, 246, 242
View
$5.50
Sold Out!
Part: fuel tank rear trigger handle housing, bare bones
Condition: good used/working shape with no leaks. Has some scuffing/dings
Fits: husqvarna 254, 257
View
$29.95
Sold Out!
Part: brass worm gear for the oil pump
Condition: good used/working shape
Fits: husqvarna 262 xp older, 254 154 254xp 254se 257
View
$7.00
Ready to ship (1 in stock)
Part: intake gasket, part # 503 54 44-01
Condition: good used/working shape
Fits: husqvarna 254
View
$1.99
Sold Out!
Part: throttle trigger with cable wire, part #s 503 47 11-01 & 503 52 04-02
Condition: good used/working shape
Fits: husqvarna 394 395 xp 394xp 395xp
View
$11.50
Sold Out!
Part: muffler hardware - screws/nuts/gasket
Condition: good used/working shape
Fits: Husqvarna 266, 266se, 266xp, 61. Jonsered 630 625 670 Series.
View
$6.99
Ready to ship (1 in stock)
Part: clutch mechanism
Condition: good used/working shape
Fits: Husqvarna 346 xp 351 340 345 350
View
$9.95
Ready to ship (1 in stock)
Part: rim sprocket drum 503 98 00-01
Condition: has some oxidation but is in good working shape
Fits: Husqvarna 346 xp
View
$12.99
Sold Out!
Impulse seal 530 05 34-35
In good used shape
Fits Husqvarna 36, 41, 136, 141 and others
View
$1.99
Ready to ship (1 in stock)
Part: gasket
Condition: good used/working shape
Fits: Husqvarna 261, 262
View
$2.95
Sold Out!
Part: washer for the hand guard, part # 503 23 00-01
Condition: good used/working shape
Fits: Husqvarna 357, 359 xp
View
$2.50
Ready to ship (1 in stock)
Part: set of 3 clutch springs
Replaces Husqvarna Part Number: 503 74 43 01
Condition: new, after-market part
Fits: Husqvarna 371, 372, 365, 362
Location: new misc. parts bin #4, box 525
View
$7.50
Ready to ship (1 in stock)
Part: starter housing cover with pulley, rewind spring and grip
Condition: good used/working shape
Fits: Husqvarna 137
View
$28.00
Sold Out!
Part: throttle trigger with safety interlock lever. PN 530-069587
Condition: good used/working shape
Fits: Husqvarna 36, 41, 136, 141
View
$7.77
Sold Out!
Part: metal clutch / sprocket brake cover
Condition: good used/working shape, has a few small / minor chips
Fits: older model (early) Husqvarna 181 chainsaws which have the metal hand guard
View
$39.00
Ready to ship (1 in stock)
Part: crank case (right, clutch side) with bar stud/bolt set
Condition: Bearing is NOT good. Case and bar studs are in good used/working shape
Fits: Husqvarna 266 se
View
$16.99
Sold Out!
Part: chain adjuster screw, bar adjusting pin and idler gear. Part #S
545-060201, 545-060501, 545-065901
Condition: good used/working shape
Fits: Husqvarna 230, 235
View
$7.95
Sold Out!
Part: starter pulley
Condition: good used/working shape
Fits: Husqvarna 65 L
View
$12.99
Sold Out!
Part: crank case half, right clutch side
Condition: good used/working shape
Fits: Husqvarna 268 268xp 272xp 272 xp.
View
$25.00
Sold Out!
Part: rubber buffer plug
Condition: good used/working shape
Fits: Husqvarna 272, 268
View
$3.00
Sold Out!
Part: muffler gasket
Condition: good used/working shape
Fits: Husqvarna 44
View
$3.00
Sold Out!
Part: air filter
Condition: good used/working shape
Fits: Husqvarna Practica 40
View
$9.99
Sold Out!
Part: flywheel nut. Part # 503 22 04-01
Condition: good used/working shape
Fits: Husqvarna 570, 575xp
View
$2.99
Sold Out!
Part: lot of misc. hardware
Condition: good used/working shape
Fits: Husqvarna 575xp
View
$7.99
Sold Out!
Part: off switch
Condition: good used/working shape
Fits: Husqvarna 480cd
View
$7.50
Sold Out!
Part: throttle link rod
Condition: good used/working shape
Fits: Husqvarna 480cd
View
$6.99
Sold Out!
Part: throttle lever guide and spring
Condition: good used/working shape
Fits: Husqvarna 480cd
View
$4.99
Sold Out!
Part: carburetor support bracket. Part # 537 20 45-01
Condition: good used/working shape
Fits: Husqvarna 570, 575xp
View
$5.00
Ready to ship (2 in stock)
Part: partition base. Part # 537 20 47 01
Condition: good used/working shape
Fits: Husqvarna 570, 575xp
View
$5.50
Ready to ship
Part: air duct/ injection tube / shield, part # 537 20 92 01
Condition: good used/working shape
Fits: husqvarna 570 576, 575xp, 576xp
View
$5.99
Ready to ship
Part: fuel/ gas cap. PN 537 21 52-02
Condition: good used/working shape
Fits: Husqvarna 570, 575xp, 576xp
View
$4.50
Ready to ship
Part: brake dust cover. Part # 537 20 32-01
Condition: good used/working shape
Fits: Husqvarna 570, 575xp, 576xp
View
$3.95
Sold Out!
Part: fuel line/hose (Pn 544 32 50-02) and filter (PN 503 44 32-01)
Condition: good used/working shape
Fits: Husqvarna 570, 575xp
View
$6.99
Ready to ship
Part: (1) piston ring
Part # 504 35 25 12 / 504352512
Condition: new old stock part. Dusty/dirty from years of storage
Fits: some Husqvarna and Poulan models
Location: box 506
View
$9.99
Sold Out!
Part: fuel tank rear trigger handle. Includes: all 6 rubber AV tank mounts, fuel vent peton, and molded fuel line. 501 58 86-01
Condition: good used/working shape with no leaks.
Fits: Husqvarna 480cd and others
View
$49.95
Sold Out!
Part: brake washer
Condition: good used/working shape
Fits: Husqvarna 357xp, 359xp
View
$3.00
Ready to ship
Part: clutch carrier rotor
Condition: good used/working shape
Fits: Husqvarna 272xp
View
$3.95
Ready to ship
Part: brake cover, part # 537 10 80-01
Condition: good used/working shape
Fits: Husqvarna 357xp, 359xp
View
$3.00
Ready to ship
Part: (1) starter pawl with spring and stud
Condition: good used/working shape
Fits: Husqvarna 371, 372 xp, 362
View
$4.95
Sold Out!
Part: fuel tank vent
Condition: good used/working shape
Fits: Husqvarna 371, 372 xp
View
$4.99
Sold Out!
Part: ignition off switch
Condition: good used/working shape
Fits: Husqvarna Practica 40
View
$7.99
Sold Out!
Part: crank shaft with connecting rod and bearings
Condition: good used/working shape
Fits: Husqvarna 345
View
$35.00
Ready to ship (1 in stock)
Part: inner guide plate, PN 537 01 37-02
Condition: good used/working shape
Fits: Husqvarna 575xp, 576xp
View
$4.99
Sold Out!
Part: Husky 346 XP Muffler Shield Plate. PN 503 97 13-01.
Condition: good used/working shape
View
$4.50
Sold Out!
Part: Husky 32 Right Rear Trigger Handle Half Cover
Condition: good used/working shape
View
$18.00
Sold Out!
Part: brake knee joint lever. PN 501 87 53-01
Condition: good used/working shape
Fits: Husqvarna 50, 51, 55
View
$5.00
Backordered
Part: tillotson HS 234B
Condition: good used physical shape. May need a carb rebuild kit.
Fits: Husqvarna 268
View
$19.95
Ready to ship
Part: starter housing cover with pulley, spring 537 10 27-01
Condition: has a broken grill, scuffing - in working/usable order may or may not have decal
Fits: Husqvarna 350 340 351 353 and some other models.
View
$9.99
Sold Out!
Part: heating element for heated handles. PN 537 07 14-01
Condition: good used/working shape
Fits: Husqvarna 372 xpg and some other models
View
$6.50
Sold Out!
Part: ignition off switch for models which have heated handles (type 2)
Condition: good used/working shape
Fits: Husqvarna 371, 372 xpg
View
$6.50
Sold Out!
Part: rubber plug
Condition: good used/working shape
Fits: Husqvarna 285
View
$4.99
Sold Out!
Part: piston and ring
Condition: good used/working shape
Fits: Husqvarna 362 special, xp. Jonsered 2063 Turbo.
View
$17.00
Sold Out!
Part: air filter housing base and mount
Condition: good used/working shape
Fits: Husqvarna 371, 372 xp
View
$9.95
Ready to ship
Part: choke rod lever. PN 530-029831
Condition: good used/working shape
Fits: Husqvarna 36, 41
View
$2.99
Sold Out!
Part: chain catcher stop
Condition: good used/working shape
Fits: Husqvarna 288
View
$5.50
Ready to ship (4 in stock)
Part: throttle trigger
Part # 501 80 55-01
Condition: good used/working shape
Fits: Husqvarna 181
View
$9.99
Ready to ship
Part: pulley screw
Part # 503 21 06 16
Condition: new old stock OEM part. Dusty/dirty from years
of storage.
Fits: Husqvarna 40, 45, 49 and some other models
Location: Box H-49
View
$2.99
Ready to ship (4 in stock)
Part: throttle safety lever catch
Part # 501 87 77 02
Condition: new old stock OEM part. Dusty/dirty from years of storage.
Fits: Husqvarna 254, 257
Location: Box H-49
View
$9.99
Sold Out!
Part: Crank case half flywheel side
Condition: Good Used/ Working Condition
Fits: Husqvarna 181
View
$35.00
Sold Out!
Part: Starter pawl stud and spring set. DOES NOT INCLUDE THE PAWLS
Condition: Good used/ working condition
Fits: Husqvarna 50, 51, 55
View
$4.00
Ready to ship (3 in stock)
Part: cylinder cover screw
Part #530 01 59 03
Condition: new old stock OEM part. Dusty/dirty from years
of sitting in storage.
Fits: Husqvarna 36, 41
Location: Box H-49
View
$2.99
Ready to ship (2 in stock)
Part: starter bushing sleeve
Part # 501 63 06 01
Condition: new old stock OEM part
Fits: Husqvarna 340, 345, 350, 346xp 353 351 371 371xp 372 372xp 365 362 359 357xp. Jonsered 2141 2145 2150 2152 2153 2156 2159 2063 2163 2065 2165 2166 2171 2071 2172 Turbo. And others.
...
View
$3.50
Sold Out!
Part: muffler attachment bracket plate
Part # 501 60 84 01
Condition: new old stock OEM part. Has minor rust from years of
storage.
Fits: some models of Husqvarna 266, 61
Location: box H-46
View
$7.50
Sold Out!
Part: clutch hub / spider carrier
Part # 501 27 79 01
Condition: New old stock OEM part. Dusty/dirty from years of
storage.
Fits: Husqvarna 65 L
Location: Box H-44
View
$17.00
Ready to ship (3 in stock)
Part: left side rear trigger handle half. Part # 503 10 56-02
Condition: good used/working shape
Fits: Husqvarna 40, 45
View
$10.00
Sold Out!
Part: starter housing cover with pulley, spring and grip. 501 40 18-02
Condition: good used/working shape
Fits: Husqvarna 285cd, 285 CD
View
$45.00
Sold Out!
Part: piston keeper ring / clip set
Condition: good used/working shape
Fits: Husqvarna 371, 372
View
$3.99
Sold Out!
Part: lot of assorted hardware – screws, nuts – everything pictured
Condition: good used/working shape
Fits: Husqvarna 40, 45
View
$8.50
Sold Out!
Part: starter housing cover with pulley and spring
Condition: good used/working shape
Fits: Husqvarna 162
View
$29.99
Ready to ship (1 in stock)
Part: set of bar nuts
Condition: dinged up but in good used/working shape
Fits: Husqvarna 162
View
$5.99
Ready to ship (1 in stock)
Part: insulator
Condition: good used/working shape
Fits: Husqvarna 162
View
$3.50
Ready to ship (1 in stock)
Part: starter rewind spring 501 63 02-02
Condition: good used/working shape
Fits: Husqvarna 261, 262xp, 257, 254
View
$5.00
Sold Out!
Part: handle holder support
Part # 501 60 94 01
Condition: New old stock part. May be dusty/dirty/have minor oxidation from years of storage.
Fits: Husqvarna 285 CD
Location: H-30
View
$9.50
Ready to ship
Part: screw
Part # 725 53 37 55
Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage.
Fits: many Husqvarna chainsaw models, such as 266, 61, 272, 181, 281, 272
Location: Husky Bin H-30
View
$2.99
Ready to ship (1 in stock)
Part: idle speed screw
Part # 501 22 19 01
Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage.
Fits: Husqvarna 480, 77, 180 s
Location: Husky Bin H-30
View
$2.99
Sold Out!
Part: screw, m5 x 10
Part # 503 20 07 10
Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage.
Fits: Husqvarna 359 357
Location: Husky bin H-16
View
$2.99
Ready to ship (1 in stock)
Part: carburetor throttle shaft
Part # 501 69 10 01
Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage.
Fits: Husqvarna 480, 77, 65
Location: Husky bin H-22
View
$7.99
Ready to ship
Part: carburetor choke shaft
Part # 501 48 37 01
Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage.
Fits: Husqvarna 285, 2100, 1100
Location: Husky bin H-22
View
$7.99
Ready to ship
Part: filter base screw
Part # 729 53 42-05
Condition: New old stock OEM part. May or may not be dusty/dirty/have minor oxidation from years of storage.
Fits: Husqvarna 268 Special
Location: Husky Bin H-18
View
$2.50
Ready to ship (1 in stock)
Part: throttle safety lever
Part # 501 82 08 01
Condition: New old stock OEM part. May be dusty/dirty/have minor scuffs from years of storage.
Fits: Husqvarna 44, 444
Location: Husky Bin H-11
View
$9.99
Sold Out!
Part: trigger shaft
Part # 501 51 97 02
Condition: New old stock OEM part
Fits: Husqvarna 266, 268, 61, 272
View
$5.00
Sold Out!
Part: air filter element
Part # 507 43 33 85
Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage.
Fits: Husqvarna 33, 38. Jonsered 370 380.
Location: Husky Bin H-11
View
$6.99
Ready to ship
Part: choke control lever
Part # 503 92 25 01
Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage.
Fits: Husqvarna 357, 359
Location: Husky Bin H-11
View
$6.50