Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.
husqvarna 359, 357 xp chainsaw flywheel side crankcase half
flywheel side case half good used working condition fits husqvarna 359, 357xp
husqvarna 350 chainsaw crankcase tank chassis (non primer type)
Part: crank case tank chassis housing Condition: good used/working shape. Fits: came off a Husqvarna 350, will also fit 345, 340
husqvarna 385xp chainsaw crankcase housing assembly
Part: crank case housing cases - both halves Condition: good used/working shape Fits: husqvarna 385 xp
husqvarna 372 chainsaw crankcase housing half only (right, clutch side)
Part: crank case housing half, right, clutch cover Condition: good used/working shape Fits: husqvarna 372 365 371 xp 372xp 371xp 365sp
husqvarna 359, 357 xp clutch side crankcase half
husqvarna 359,357xp clutch side crank case half does not include bearing or seal good used working condition some scratching wear. Good threads, no chips and cracks. fits husqvarna 359, 357xp
Husqvarna 365 Chainsaw Flywheel side case half
Flywheel left side crankcase half. In good usable used shape Fits Husqvarna 362sp, 365sp, 365 sp special, 362, 365, 371, 372 xp, 371xp, 372xp
husqvarna 575xp chainsaw crankcase half, right clutch side
Part: right clutch side of the crank case housing with bar stud / bolt set Condition: good used/working order Fits: Husqvarna 575 xp, 570
(3 in stock)
husqvarna 338xpt chainsaw engine crankcase housing with bar bolt
Part: crank case housing with bar stud / bolt Condition: good used/working shape. May not include grommet. Fits: Husqvarna 338 xpt, 335xpt, 335 334t 334t
Husqvarna 346xp chainsaw crankcase half, left flywheel side
Part: crank case chassis half, left flywheel side Condition: good used/working shape Fits: Husqvarna 346 xp
husqvarna 575 xp chainsaw crankcase half
Part: left (flywheel side) crank case tank half Condition: good used/working shape Fits: Husqvarna 575xp, 570
husqvarna 350 chainsaw crankcase tank chassis (equipped to take primer)
Part: crank case tank chassis with bar stud set Condition: has some minor melt marks, in good used/working order with no leaks Fits: Husqvarna 350 models which have primers
husqvarna 346xp chainsaw crankcase half, right clutch side with bar stud set
Part: crank case chassis half, right clutch side with set of bar studs/bolts Condition: good used/working shape Fits: Husqvarna 346 xp, 353
husqvarna 394 chainsaw crankcase half (right, clutch side)
Part: crank case housing half Condition: Some oxidation and staining. Good thread holes, and in good usable shape. Fits: Husqvarna 394, 395xp
husqvarna 141 chainsaw oil tank crankcase chassis #2
Part: crankcase oil tank. Includes the bar stud set. Bare bones otherwise. Condition: good used/working shape with no breaks or leaks. Fits: Husqvarna 141
husqvarna 394xp 395xp chainsaw Inner Bucking Spike Assembly
Part: Inside spike dog with chain catcher 503 47 00-01, 503 47 05-01 Condition: In good used shape. Fits: Husqvarna 394xp, 394 395 xp, 395xp
husqvarna 445, 450, 445e, 450e chainsaw crankcase tank chassis housing with bar studs
Part: crank case tank chassis housing with bar studs and 3 clip holders Condition: good used/working order Fits: Husqvarna 445, 450, 445e, 450e
husqvarna 372 chainsaw crankcase half with bar stud set (Right, clutch side)
Part: crank case chassis housing half with set of bar studs / bolts Condition: good used/working shape Fits: Husqvarna 372
husqvarna 281 chainsaw crankcase housing half (right, clutch side)
Part: right clutch side of the crank case housing half with bar stud/bolt set Condition: good used/working shape Fits: Husqvarna 281 288 281se 281xp 288xp lite xp etc.
(1 in stock)
husqvarna 266 chainsaw crankcase spacer
Part: crankcase seal / spacer part number:501 52 82-01 501 80 49 Condition: good used/working shape Fits: husqvarna 266 se 266se
husqvarna 266se chainsaw left, flywheel side crankcase half
Part: crank case half (left, flywheel side) Condition: good used/working shape. Has some minor chipping. Fits: Husqvarna 266 se
husqvarna 281, 288 chainsaw rubber bellows
Part: throttle thru crankcase rubber bellows grommet. Pn 501 91 67-02 Condition: good used/working shape Fits: Husqvarna 281, 288, 288xp
husqvarna 55 chainsaw complete crankcase
Part: crank case, both engine housing halves with bar stud set and crankshaft. Part numbers 503 57 38-06, 501 76 22-02 Condition: good used/working shape Fits: Husqvarna 55, 55 rancher
(2 in stock)
husqvarna 50, 51, 55 chainsaw clutch side crankcase half
Part: clutch side crank case half Condition: good used/working shape Fits: Husqvarna 50, 51, 55
husqvarna 394 chainsaw crankcase half (left, flywheel side)
Part: crank case housing half Condition: Some oxidation and staining. Good thread holes, and in good usable shape. Fits: Husqvarna 394, 395xp
Husqvarna 262 XP chainsaw flywheel side case half
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape Fits Husqvarna 262, 262xp, and 261
husqvarna 268 chainsaw crankcase half (left side)
Part: crank case half, left flywheel side Condition: good used/working shape Fits: Husqvarna 268
husqvarna 254, 154, 262 chainsaw seal retainer with screws
Part: seal retainer with o ring and screws Part # 501 87 24-01, 740 48 27-02, 501 49 76-01 Condition: good used/working order Fits: Husqvarna 154, 254, 262
husqvarna 357xp chainsaw complete crankcase with crankshaft and rod assembly
Part: crank case engine housing with crankshaft and connecting rod 503 92 53-71 Condition: good used/working order Fits: Husqvarna 357 xp xpg, and can be used on 359 as well.
husqvarna 136 chainsaw crankcase chassis tank housing
Part: crank case tank housing chassis with bar stud set Condition: good used/working shape Fits: Husqvarna 36
husqvarna 61 chainsaw seal retainer plate used
Part: seal retainer plate Part # 501 52 82-01 Condition: good used/working shape Fits: Husqvarna 61
husqvarna 41 chainsaw crankcase chassis with bar stud set
Part: crank case chassis oil tank housing with set of bar studs/bolts. 530069942, 530-069942, 530 06 99-42 Condition: good used/working shape. Has a melted section as pictured, no leaks. Fits: Husqvarna 41 36 136 141
(1 in stock)
husqvarna 136, 141 chainsaw crankcase cap
Part: crank case engine pan cap Part # 530028706 Condition: good used/working shape Fits: Husqvarna 136, 141
Husqvarna 266 Chainsaw Right Crankcase Crank Case Half #2
Part: clutch side crank case half, bare bones Condition: good used/working shape. Has some chipping. Fits: Husqvarna 266
Husqvarna 181 Chainsaw crankcase case half, clutch side
Part: Clutch side crankcase half. Includes bar studs Condition: Good used/ Working Condition Fits: Husqvarna 181
Husqvarna 288xp Chainsaw Crankcase Assembly
Crankcase assembly includes: both left flywheel side, and right PTO clutch side case halves, and crankshaft. In good used shape with no big cracks or chunks broke off. Good threads in the bolt and screw holes. Bearings and seals in the case look very good but can't be guaranteed. Fits Husqv...
Husqvarna 385xp Chainsaw Clutch Side Case Half
Clutch PTO side crankcase half. In good used shape Fits Husqvarna 385 390 xp 385xp 390xp
Husqvarna 346xp Chainsaw Crankcase Only
Crankcase only includes:left flywheel side case half, and right clutch side case half. In good used shape Fits Husqvarna 346XP, 353. Has boss for attaching primer on 2008+ model year saws.
Husqvarna 346xp Chainsaw Crankcase Assembly
Crankcase includes: crankshaft, crank bearings, left flywheel side case half, right clutch side case half. In good used shape Fits Husqvarna 346XP, 353
Husqvarna 576xp chainsaw crankcase assemby
Part: Crankcase assembly with left flywheel side, right pto clutch side, crankshaft and bearings. 544 89 66-02 Condition: good used/working order Fits: Husqvarna 576 xp only
Husqvarna 385xp chainsaw crankcase and crankshaft assembly
Part: crank case housing cases - both halves - and crankshaft with bearings Condition: good used/working shape, chip on lower front edge of case Fits: husqvarna 385 xp
Husqvarna 272xp Chainsaw Crankcase Assembly
Crank case with crankshaft, and both case halves. Crankshaft for woodruff key type flywheels. Case for 1pc ignition coil systems. 501 77 99-01, 501 52 84-02 In good used shape, may or may not need new seals. Fits Husqvarna 61, 268, 272 xp SN# 107001 - 3481259
Husqvarna 2100 CD chainsaw clutch side case half
Crankcase half. Right, clutch PTO side. One side of 501 56 92-04 In good used shape Fits Husqvarna 2100cd 285CD 285 CD and others
Husqvarna 262 XP chainsaw clutch side case half
Crankcase half. Right, clutch side. One side of 501 86 00-04 In good used shape Fits Husqvarna 262, 262xp, 261 and 257
husqvarna 576xp chainsaw crankcase half, right clutch side
Part: right clutch side of the crank case housing with bar stud / bolt set Condition: good used/working order Fits: Husqvarna 576 xp only
(1 in stock)
husqvarna 262, 254, 257 chainsaw deflector shield with screws
Part: shield / deflector and screws for the crankcase Part # 503 54 37-01, 724 33 25-56 Condition: good used/working order Fits: Husqvarna 254, 257, 262
Husqvarna 350 crankcase tank chassis with crank
Husqvarna 350 crankcase tank chassis good used working condition fits husqvarna 350 crank PN# 503 85 80-71 Bearing cup PN# 503 88 59-01 Crankcase PN# 537 17 20-03
(1 in stock)
husqvarna 281 chainsaw crankcase housing half (left, flywheel side)
Part: crank case housing half, left flywheel side Condition: good used/working shape Fits: husqvarna 281 288 288xp
(1 in stock)
husqvarna 266se chainsaw right, clutch side crankcase half
Part: crank case (right, clutch side) with bar stud/bolt set Condition: Bearing is NOT good. Case and bar studs are in good used/working shape Fits: Husqvarna 266 se
husqvarna 268 chainsaw crankcase half (right side)
Part: crank case half, right clutch side Condition: good used/working shape Fits: Husqvarna 268 268xp 272xp 272 xp.
husqvarna 570, 575 xp chainsaw air injection tube used pn 537 20 92-01
Part: air duct/ injection tube / shield, part # 537 20 92 01 Condition: good used/working shape Fits: husqvarna 570 576, 575xp, 576xp
Husqvarna 181 Chainsaw crankcase case half, flywheel side
Part: Crank case half flywheel side Condition: Good Used/ Working Condition Fits: Husqvarna 181
Husqvarna 266 Chainsaw Right Crankcase Crank Case Half #1 (with studs)
Part Name: right side (clutch side) crankcase half Part Description: Solid used/working shape. Has some minor chipping. Fits the Following Models: Husqvarna 266
Husqvarna 266se chainsaw case bolts
Part: set of 7 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 266 se
husqvarna 359, 357 xp clutch side crankcase half #2
husqvarna 359,357xp clutch side crank case half does not include bearing or seal good used working condition some scratching wear. Has some corrosion - see photos fits husqvarna 359, 357xp
husqvarna 266 chainsaw crankcase spacer 501 80 49 New (H-15)
Part: crankcase seal / spacer part number: 5018049 Condition: new old stock from closed out dealer. Fits: husqvarna 266 266se and some other models
husqvarna 372 chainsaw crankcase housing half only (right, clutch side) #2
Part: crank case housing half, right, clutch cover with set of bar studs / bolts Condition: good used/working shape. Has some dings/scratches and a small crack. Fits: husqvarna 372 365 371 xp 372xp 371xp 365sp
Husqvarna 2100 Chainsaw Crankcase Assembly
Crank case with crankshaft, rod and bearings. 501 60 12-02 In good used shape Fits Husqvarna 2100CD, 2100 CD and others
Husqvarna 385xp Chainsaw Flywheel Side Case Half
Flywheel side crankcase half. In good used shape Fits Husqvarna 385 xp
husqvarna 154 se chainsaw crankcase housing half (left side)
Part: left (flywheel) crank case tank housing half, with oil cap Condition: good used/working order Fits: Husqvarna 154se
(2 in stock)
Husqvarna 2100 CD chainsaw flywheel side case half
Crankcase half. Left, flywheel side. One side of 501 56 92-04 In good used shape Fits Husqvarna 2100cd and others
husqvarna 345 chainsaw crankcase tank chassis
Part: crank case tank chassis Condition: good used/working shape Fits: came off a Husqvarna 345 model, will also fit 340 and 350
husqvarna 137 chainsaw crankcase chassis housing tank
Part: crank case chassis housing tank with bar stud set and oil cap Condition: good used/working shape Fits: Husqvarna 137
(1 in stock)
husqvarna 42 chainsaw crankcase half - left flywheel side
Part: crank case housing half, left side 501 62 07-01 Condition: good used/working shape Fits: Husqvarna 42 and some models of 246
husqvarna 357xp chainsaw case bolts
Part: set of 6 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 357 xp, 359
husqvarna 162 se chainsaw flywheel side crankcase half
Part: flywheel side crank case half Condition: good used/working shape Fits: Husqvarna 162se
husqvarna 480 cd chainsaw crankcase housing half (clutch side)
Part: clutch side crank case engine housing half with bar studs Condition: good used/working shape. Has chipping/oxidation in metal but is in usable shape with no breaks. Fits: Husqvarna 480cd
husqvarna 480 cd chainsaw crankcase housing half (flywheel side)
Part: flywheel side crank case engine housing half Condition: good used/working shape Fits: Husqvarna 480cd
(1 in stock)
husqvarna practica 40 chainsaw crankcase tank #2
Part: crank case tank Condition: good used/working shape. No leaks. Fits: Husqvarna Practica 40
husqvarna 272 xp chainsaw crankcase half
Part: crankcase half, left flywheel side-casing only Condition: good used/working shape Fits: Husqvarna 272 XP
(1 in stock)
husqvarna 281 chainsaw crankcase housing half (left, flywheel side) NOS 501 80 05 (MGSFU)
Part: crank case housing half, left flywheel side Condition: New old stock from closed out dealer. Bearing turns but may need cleaning or replacing. Fits: husqvarna 281 288 288xp
(1 in stock)
husqvarna 445, 450, 445e, 450e chainsaw crankcase tank chassis housing with bar studs New OEM 537 43 82 (BHJSP)
Part: crank case tank chassis housing with bar studs and oil vent Part number: 5374382 Condition: New old stock. Has a few minor dings from years of storage. Fits: Husqvarna 445, 450, 445e, 450e
Husqvarna 262 XP chainsaw flywheel side case half #2
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape, has some paint loss, a chip out and wear spot Fits Husqvarna 262, 262xp, and 261
husqvarna 351 clutch side crankcase half 503 85 69
husqvarna 351 clutch side crank case half does not include bearing or seal good used working condition some scratching wear and corrosion. fits husqvarna 351
(1 in stock)
husqvarna 570, 575 xp chainsaw air injection tube new oem pn 537 20 92-01 (H-7)
Part: air duct/ injection tube / jet / shield, part # 537209201 Condition: new old stock from closed out dealer. Fits: husqvarna 570 576, 575xp, 576xp
husqvarna 266xp chainsaw left, flywheel side crankcase half
Part: crank case half (left, flywheel side) 501 68 53 Condition: good used/working shape. Has some minor chipping. Fits: Husqvarna 266 xp
(1 in stock)
husqvarna 266se chainsaw right, clutch side crankcase half #2
Part: crank case (right, clutch side) Condition: Bearing is NOT good. In good used/working shape Fits: Husqvarna 266 se
husqvarna 359, 357 xp clutch side crankcase half #3
husqvarna 359,357xp clutch side crank case half does not include bearing or seal good used working condition some scratching wear. Has a chip missing - see photos fits husqvarna 359, 357xp
(1 in stock)
husqvarna 266se chainsaw left, flywheel side crankcase half #2
Part: crank case half (left, flywheel side) Condition: good used/working shape. Has a chip, and still functional. See photos. Fits: Husqvarna 266 se
husqvarna 575 xp chainsaw crankcase half #2
Part: left (flywheel side) crank case tank half Condition: good used/working shape. Has a chip missing - see photos Fits: Husqvarna 575xp, 570
husqvarna 262 chainsaw seal retainer with screws type 2
Part: seal retainer with o ring and screws Condition: good used/working order Fits: Husqvarna 262. May fit others
(1 in stock)
husqvarna 262, 254, 257 chainsaw deflector shield NEW (H-58) 503 54 37-01
Part: shield / deflector Part # 503 54 37-01 Condition: New old stock OEM part Fits: Husqvarna 254, 257, 262
(1 in stock)
Husqvarna 257 chainsaw flywheel side case half
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape Fits Husqvarna 257, 262, 262xp, and 261
Husqvarna 257 chainsaw clutch side case half
Crankcase half. Right, clutch side. One side of 501 86 00-04 In good used shape Fits Husqvarna 257, 262, 262xp, and 261
(1 in stock)
Husqvarna 262xp chainsaw case bolts
Part: set of 6 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 262 xp 257
Husqvarna 435 chainsaw crankcase tank chassis housing with bar studs
Part: crank case tank chassis housing with bar studs Condition: good used/working order Fits: Husqvarna 435 435e
(2 in stock)
Husqvarna 42 chainsaw crankcase half - right side
Part: crank case housing half, right side 501 62 06-01 Condition: good used/working shape Fits: Husqvarna 42 and some models of 246
(1 in stock)
Husqvarna Practica 44 Chainsaw Clutch Side Case Half
PTO clutch right side crankcase half. One side of 501 66 10-02 In good used shape Fits Husqvarna Practica 44 and many others.
(1 in stock)
Husqvarna Practica 44 Chainsaw Flywheel Side Case Half
Flywheel left side crankcase half. One side of 501 66 10-02 In good used shape Fits Husqvarna Practica 44 and many others.
Husqvarna 272xp Chainsaw Flywheel side Case Half
Crank case half, left flywheel side. For saws with 1pc ignition coil. In good used shape Fits Husqvarna 61, 268, 272 xp SN# 107001+
husqvarna 575 xp chainsaw case pin set of 4
Part: set of 4 case pins, part # 501 27 08-01 Condition: good used/working shape Fits: Husqvarna 575xp
(1 in stock)
husqvarna 136 chainsaw crankshaft with connecting rod and bearings
Part: crank shaft with connecting rod and bearings Condition: good used/working shape Fits: Husqvarna 136
(1 in stock)
Husqvarna 32 Chainsaw Crankcase Tank
Part: Husqvarna 32 Crank Case Tank Condition: good used/working shape.
(1 in stock)
husqvarna 50, 51 chainsaw crankcase shield
Part: crank case shield. Part # 503 73 04-01 Condition: good used/working shape Fits: Husqvarna 51, 55.
(4 in stock)
husqvarna 51 chainsaw crankcase half - flywheel side
Part: flywheel side of the crank case housing Condition: good used/working shape Fits: Husqvarna 51, 55, 55 Rancher
(2 in stock)
Husqvarna Practica 40 Chainsaw Crankcase #1 with crankshaft
Part Name: – Crankcase with crankshaft and rod. Good used/working shape. Some dings/gouges in the metal. No leaks. Fits the Following Models: – Husqvarna Practica 40. And some other older models like 140s, 240, etc.