Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.
Sold Out!
46mm top end motor kit. Includes: cylinder, piston, ring, wrist pin, and keepers. 503 60 91-71
Good used OEM cylinder and piston
Fits: Husqvarna 55, 55 rancher, 51
View
$85.00
Sold Out!
OEM Mahle cylinder. 50mm bore. 503 62 64-72 sans piston 50ZN21
In excellent used shape
Fits Husqvarna 371, 371xp, 372, 372xp. Jonsered 2171, 2071 Turbo. Can be retrofit onto 365 Husqvarna and 2165, 2065 Jonsered as an upgrade.
View
$75.00
Sold Out!
Complete, metal clutch cover, chainbrake brake assembly 503 74 70-72
In nice used shape
Fits Husqvarna 254, 257, 261, 261XP, 262, 262XP, 262 XP
View
$69.95
Sold Out!
Part: handle bar
Part # 501 58 61-01
Condition: good used/working order. Some rubber gripping is torn / missing.
Fits: Husqvarna 285 480 CD 285cd 480cd and others
View
$29.95
Sold Out!
Part: top cover engine shroud 501 61 00-01, 503 61 01-01
Condition: good used/working condition
Fits: Husqvarna 61 and 61 rancher
View
$29.99
Sold Out!
Clutch mechanism with shoes, springs, and carrier. 537 10 34-01
Good used shape
Fits Husqvarna: 359, 357xp, 357 xp xpg. Jonsered: 2156, 2159 Turbo
View
$19.95
Sold Out!
Part: walbro hda 24 carburetor
Condition: good used physical shape, may need a carb rebuild kit
Fits: Husqvarna Practica 44, 240s, 140, 40 and others
View
$25.00
Sold Out!
Molded fuel gas line with filter 501 81 46-01
In good used shape
Fits Older Husqvarna 181 281 SE SG 181se 281se with the molded line
View
$12.50
Ready to ship
Top end motor kit includes: cylinder, piston with ring, wrist pin, small end rod bearing, and keeper clips. 501 41 78-01
In good used shape
Fits Husqvarna 65 65L 65-L
View
$95.00
Sold Out!
Intake air tube
In good used shape
Fits Husqvarna 272 XP
View
$4.95
Sold Out!
Part: Inside spike dog with chain catcher 503 47 00-01, 503 47 05-01
Condition: In good used shape.
Fits: Husqvarna 394xp, 394 395 xp, 395xp
View
$13.95
Sold Out!
Complete clutch assembly includes: 3/8-7 rim sprocket, needle bearing, drum, and clutch mechanism. 502 44 04-02, 503 74 44-05
In good used shape with new 7 tooth rim installed
Fits Husqvarna 576XP 576 X-torq Autotune, 575XP and others
View
$45.00
Sold Out!
Rubber fuel line grommet 503 73 58-01
In good used shape
Fits Husqvarna 50 51 55 254 257 261 262
View
$2.95
Sold Out!
Fuel and oil tank housing with throttle control parts. 503 79 21-71
In good used shape
Fits Husqvarna 335 XPT
View
$49.95
Sold Out!
Fuel gas tank rear trigger handle only. 501 80 91-01
In good used shape
Fits Husqvarna 181SE 181 SE
View
$75.00
Backordered
Chainbrake handle 515 98 09-01
In good used shape
Fits Husqvarna 372 XP Torque and others
View
$27.75
Sold Out!
Crankshaft with rod 501 29 16-61
In good used shape
Fits Husqvarna 2100 2101 CD
View
$65.00
Sold Out!
Part: top cover pre screen
Part # 501 61 44 01
Condition: NEW
Fits: Husqvarna 285, 2100, 2101
View
$9.99
Sold Out!
Top cover and air filter cover set: 575 25 59-01, 503 81 77-01
In good usable shape.
Fits Husqvarna 372 xp xtorq
View
$29.95
Sold Out!
Clutch sprocket needle bearing cage. 501 51 48 01
NEW
Fits Husqvarna 61 162 and old 266 se sg. Jonsered 630
View
$7.50
Sold Out!
Plastic chain catcher. Part number 503 54 57 01
NEW
Fits Husqvarna 154 254 257 261 262 262xp SE SG and others
View
$7.50
Sold Out!
Throttle trigger return spring 530-029861
NEW
Fits Husqvarna 36 41 136 141 and others
View
$5.00
Sold Out!
Muffler bolt
In good used shape
Fits many models of Husqvarna and Jonsered chainsaw.
View
$1.50
Ready to ship (1 in stock)
Starter rewind recoil rope pulley spool. Husqvarna part number 503 48 48-01, 503 10 24-01
NEW aftermarket part
Fits many Models of Husqvarna 266, 281, 288 and others. Also fits some models of Jonsered chainsaw
View
$12.75
Sold Out!
Intake manifold boot 503 96 97-01
In good used shape
Fits Husqvarna 395 xp
View
$9.00
Sold Out!
Complete top end motor. 54mm bore OEM Mahle. Piston, cylinder, piston rings, wrist pin and bearing. Husqvarna part number: 537 16 97-71
In good used shape
Fits Husqvarna 385 XP, and Jonsered 2186 Turbo
View
$125.00
Part: brake hand guard, chainbrake handle
Part # 544 08 26-01
Condition: good used/working order
Fits: Husqvarna 445, 450
View
$15.00
Sold Out!
Muffler with bolts, nuts, bracket and cooling plate. Husqvarna part number: 503 46 62-03
In good used shape
Fits Husqvarna 395 xp, 394xp, 394 xp
View
$40.00
Sold Out!
Part: fuel tank rear trigger handle with fuel cap, throttle trigger, safety interlock lever Part #s 503 09 79-04, 501 87 77-02 + Condition: good used/working order Fits: Husqvarna 257, 254
View
$39.00
Sold Out!
OEM Mahle piston and cylinder set. 50mm bore. Includes cylinder, piston and piston rings. Husqvarna part number: 503 62 64-72
In good used shape
Fits Husqvarna 371, 371xp, 372, 372xp. Jonsered 2171, 2071 Turbo. Can be retrofit onto 365 Husqvarna and 2165, 2065 Jonsered as an upgrade.
View
$80.00
Sold Out!
Part: ignition coil 501 54 25-01, 501 55 69-01, 501 52 54-01Condition: tested and in good used/working orderFits: Husqvarna 480 CD and 380 CD
View
$95.00
Ready to ship (1 in stock)
Part: spark arrestor type muffler
Part # 503 71 13 04
Condition: new, after-market
Fits: Husqvarna 394xp, 395xp, 394xpg, 395xpg, 395xpw, 394xpw.
View
$35.00
Sold Out!
Part: .325" pitch x 7T spur sprocket drum for the clutch
Herr Part # N268 L7 replaces pn 503 44 49-01
Condition: new
Fits: some models of Husqvarna 42, 133, 234, 238, 242 (before serial # 3441001)
View
$13.50
Ready to ship
Part: .404" pitch x 7t spur sprocket drum for the clutch
Herr Part # N301-b7 replaces PN 501 20 37-01
Condition: new
Fits: some models of Husqvarna 65, 77, 160, 163, 180, 260, 263, 280, 380, 480
View
$13.99
Sold Out!
Replaceable rim sprocket clutch drum, and rim 3/8" pitch 7 tooth. Husqvarna part numbers: 501 59 80-02, 503 93 48-71
New Oregon Powermate aftermarket part 108565 x
Fits Husqvarna 355, 359, 357 xp. Jonsered 2159, 2156 Turbo (later models with large SD7 spline rim 7/8" bore)
View
$17.50
Backordered
Part: brake band with thumb bolt, spring, lever, brake bolts.
Part #s 501 83 02-01, 501 76 49-01, 501 61 17-01, 501 83 32-01, 501 82 43-01, 501 82 44-01
Condition: good used/working order
Fits: early model (older/old style) 181 models
View
$25.00
Sold Out!
Rear trigger handle. Fuel and oil tank assembly. Includes the tank handle, manual oiler, rubber mounts, trigger and fuel/oil caps. 501 57 12-03
Does Not have throttle lock, inter lock or oil pump button.
In good used shape, no breaks, no leaks.
Fits Husqvarna 2100 CD, 2100, 2101, 2101 xp...
View
$85.00
Sold Out!
Clutch brake cover only. Part number 503 72 08 01
NEW aftermarket part
Fits Husqvarna 394, 394xp, 395XP, 395 xp
View
$29.95
Sold Out!
Part: chainbrake asssembly - clutch cover with brake band, hand guard, spring, brake mechanism parts
Condition: good used/working order
Fits: Husqvarna Practica 44, 444, 140, 140s, and others
View
$60.00
Sold Out!
Part: walbro hda 175 carburetor
Condition: good used physical shape. May need a carb rebuild kit
Fits: Husqvarna 359, 357xp and others
View
$28.00
Ready to ship (1 in stock)
Oregon Power Mate Rim Clutch Sprocket System 108215x. Replaces Husqvarna part number 503 98 00-71. Includes Drum and .325 - 7 tooth sprocket
New
Fits Husqvarna 346XP, 346 xp, 353, 351. And Jonsered 2149, 2152, 2153 Turbo
View
$21.95
Sold Out!
Part: (1) rubber buffer for the tank chassis
Part # 503 84 61-01
Condition: good used/working order
Fits: Husqvarna 371, 372, 362, 365 and Jonsered 2171 and 2163 turbo
View
$2.25
Ready to ship (1 in stock)
Part: oil guide grommet 503 98 62-01
Condition: good used/working order
Fits: Husqvarna 335 xpt 338 xpt 338xpt 334t 334 t
View
$3.50
Ready to ship (2 in stock)
Part: guide bar plate
Part # 503 86 38-01
Condition: good used/working order
Fits: Husqvarna 335xpt 338 xpt, 338xpt
View
$4.25
Ready to ship (2 in stock)
Starter recoil rewind pulley. Part number 503 85 96-01
New aftermarket part
Fits Husqvarna 362, 365, 371 XP, 372 XP, 371XP, 372XP, 385xp, 385. Jonsered 2063, 2065, 2071, 2163, 2165, 2171, 2186 turbo and others
View
$15.00
Sold Out!
Part: oil pump oiler with worm drive gear
Part # 503 16 73-01, 501 86 69-01
Condition: good used/working order
Fits: Husqvarna 254
View
$25.00
Ready to ship
Part: starter pawls / ratchets and screws for the flywheel
Part # 503 85 95-01, 501 81 99-01
Condition: good used/working order
Fits: Husqvarna 372, 371, 362, 365 and some Jonsered models
View
$7.00
Ready to ship (1 in stock)
Part: walbro WTEA1 039, WTEA-1 835 carburetor
Part # 503 28 21-01
Condition: good used physical shape. May need a carb rebuild kit
Fits: Husqvarna 455 rancher
View
$29.95
Sold Out!
Part: fuel tank rear handle with fuel cap, throttle trigger and safety lever.
Part # 530055613, 530029984, 530071266, 530069587
Condition: good used/working order
Fits: Husqvarna 142 137
View
$36.99
Sold Out!
Part: set of caps, one oil and one fuel / gas
Part # 545 07 08-01
Condition: good used/working order
Fits: Husqvarna 236, 235, 240
View
$7.00
Sold Out!
Part: oil pump oiler with pickup hose line and block
Part # 574 71 93-01, 545 22 75-01, 545 06 95-01
Condition: good used/working order
Fits: Husqvarna 235, 236, 240, 235e 240e e tech
View
$12.99
Ready to ship (3 in stock)
Part: fuel / gas cap
Part # 530-071266
Condition: good used/working order
Fits: Husqvarna 136, 141
View
$4.95
Sold Out!
Part: oil pump oiler only
Part # 503 16 66-01
Condition: good used/working order
Fits: Husqvarna 254
View
$14.99
Ready to ship
Part: worm drive gear
Part # 503 89 22-02
Condition: good used/working order
Fits: Husqvarna 350
View
$3.99
Sold Out!
Part: set of carburetor bolts / screws
Condition: good used/working order
Fits: Husqvarna 61
View
$4.50
Sold Out!
Part: clutch sprocket guard cover
Condition: good used/working order
Fits: Husqvarna 460, 455 rancher
View
$16.50
Sold Out!
Part: piston with rings
Condition: good used/working order
Fits: Husqvarna 372
View
$16.99
Sold Out!
Muffler body only. Husqvarna part number 503 97 25-01 D
In good used shape, some denting
Fits 257 and others
View
$10.00
Ready to ship
Outer bar plate. Part number 503 15 21-01
In good used shape
Fits Husqvarna 51, 55, 55 rancher
View
$4.00
Sold Out!
Part: starter housing cover with pulley and rewind spring
Part # 501 44 00-02
Condition: good used/working order
Fits: Husqvarna 2100cd
View
$82.50
Sold Out!
Part: Zama C3 EL18b carburetor with control panel - filter mount, switch, choke, bolts, and intake boot Part #s 503 86 94-01, 503 86 96-01, 503 86 95-01, 503 86 64-01
Fits Husqvarna models 340, 345, 350, 346, 351 from 2002-09
The carburetors for the above models were replaced in order to impro...
View
$45.00
Sold Out!
Part: rubber plug bushing which fits into the cylinder
Condition: good used/working order
Fits: Husqvarna 272, may also fit other models
View
$3.00
Sold Out!
Part: piston and cylinder with wrist pin, rings, bearing, clips, base gasket
Condition: good used/working order, came off a saw with good compression
Fits: Husqvarna 242 and 42 special
View
$95.00
Ready to ship (3 in stock)
Part: (1) tank cap for the gas or fuel tank
Part # 544 11 12-01
Condition: good used/working order
Fits: Husqvarna 435, 445, 450, 445e, 450e
View
$3.99
Sold Out!
Part: crank case tank chassis housing with bar studs and 3 clip holders
Condition: good used/working order
Fits: Husqvarna 445, 450, 445e, 450e
View
$29.00
Backordered
Part: air filter housing base with stop switch control, wire and clip
Part # 544 35 99-02, 544 23 14-01
Condition: good used/working order
Fits: Husqvarna 445, 450, 445e, 450e
View
$8.99
Ready to ship (4 in stock)
Part: zama cm1 el37b carburetor
Part # 506 45 04-01
Condition: good used physical shape, may need a carb rebuild kit. May not include line.
Fits: Husqvarna 445, 450, 445e, 450e
View
$19.99
Sold Out!
Part: filter mount bolts, gasket and clip
Part # 503 21 74-50, 503 96 27-01
Condition: good used/working order
Fits: Husqvarna 359 and 357 xp
View
$7.99
Sold Out!
Part: oil pump oiler with worm gear and line / hose
Part # 501 58 29-02
Condition: good used/working order
Fits: husqvarna 44, 444
View
$25.99
Sold Out!
Part: 44 mm piston kit - includes ring, keeper clips, wrist pin
Replaces Part # 503 73 02 71
Condition: new, after-market
Fits: Husqvarna 246
View
$25.49
Sold Out!
Part: fuel tank rear trigger handle housing only. 501 58 40-03
Condition: good used/working order
Fits: Husqvarna Practica 40, 44 Rancher
View
$69.00
Sold Out!
Part: muffler assembly
Part # 501 57 29-01
Condition: used/working order. No exhaust deflector chute.
Fits: husqvarna 2100, 2100 cd, 285, 285 cd, 185
View
$45.00
Sold Out!
Part: clutch sprocket side cover with chain tensioner assembly and spike
Condition: good used/working order, with scratches and dings from regular use may or may not have decal
Fits: Husqvarna 570, 575 xp
View
$29.00
Ready to ship (1 in stock)
Part: set of 4 av buffer mounts / antivibe elements for the tank
Part # 501 76 39-02
Condition: good used/working order
Fits: Husqvarna 50, 51, 55, 55 rancher
View
$12.00
Ready to ship
38mm piston assembly includes: piston, ring, wrist pin, and keeper clips. 503 99 49-72, 503 79 24 02, 503 79 24-01
New AFTERMARKET part
Fits Husqvarna 334 t 334t 335 xpt 335xpt 336. Jonsered 2135 CS2135t CS2135 t
sale
View
$4.95
- $25.49
Sold Out!
Part: lot of misc. hardware - screws, bolts (includes everything pictured)
Condition: good used/working order
Fits: Husqvarna 455 Rancher
View
$5.00
Ready to ship (2 in stock)
Part: muffler screw
Replaces Part # 503 20 38 90
Condition: new, after-market part
Fits: Husqvarna 281 and 288
View
$3.00
Ready to ship (2 in stock)
Part: gasket for the intake manifold spacer
Part # 501 80 68 03
Condition: good used/working shape
Fits: Husqvarna 66, 268, 272
View
$2.99
Ready to ship (1 in stock)
Part: air filter (screw on type) with bottom base plate
Part # 503 89 81-02
Condition: good used/working shape
Fits: Husqvarna 51, 55
View
$7.99
Sold Out!
Part: piston and cylinder with ring, wrist pin, bearing, base gasket, bolts
Condition: good used/working shape. Came off a saw with good compression, no breaks
Fits: Husqvarna 51
View
$80.00
Backordered
Part: clutch sprocket cover guard with brake band and spring
Part # 536 10 87-01
Condition: good used/working shape ,may vary cosmetically
Fits: Husqvarna 346xp
View
$19.95
Sold Out!
Part: crank case chassis housing half with set of bar studs / bolts
Condition: good used/working shape
Fits: Husqvarna 372
View
$35.00
Ready to ship (2 in stock)
Part: carburetor intake manifold
Part # 501 25 08-01
Condition: good used/working shape
Fits: Husqvarna 65 L
View
$7.77
Ready to ship (1 in stock)
Part: inner bucking bumper spike
Part # 501 20 88-01
Condition: good used/working shape
Fits: Husqvarna 65 L and 77 L
View
$12.50
Sold Out!
Part: oil cap with keeper
Condition: good used/working shape
Fits: Husqvarna 65 L chainsaws
View
$9.95
Ready to ship
Part: clutch sprocket cover only
Condition: good used/working shape.
Fits: Husqvarna 345, 350, 340
View
$13.50
Sold Out!
Part: brake pin / rivet
Part # 722 14 24 01
Condition: new, old stock. Dusty/dirty from years of storage
Fits: Husqvarna 298, 61, 162, 266, 2101, 181, 288, 281
Location: Husqvarna box 75
View
$2.50
Sold Out!
Part: set of 4 screws for the starter cover
Condition: good used/working shape
Fits: Husqvarna 350
View
$3.00
Sold Out!
Part: 3 av spring mounts / antivibe element for the tank housing and handle
Part # 503 82 33-02 and 503 85 38-04
Condition: good used/working shape
Fits: Husqvarna 338 xpt
View
$15.94
Sold Out!
Part: set of 3 av spring mounts / anivibe elements
Condition: good used/working shape
Fits: Husqvarna 385xp
View
$15.00
Backordered
Part: handle filler cover
Part # 537 03 34-01
Condition: good used/working shape
Fits: Husqvarna 385xp
View
$3.74
Sold Out!
Part: fuel tank rear handle housing, bare bones
Condition: good used/working shape
Fits: Husqvarna 36, 41
View
$19.95
Sold Out!
Part: air filter top only
Condition: good used/working shape
Fits: Husqvarna 335xpt
View
$5.00
Sold Out!
Part: crank shaft and rod.
Part # 503 84 53-01
Condition: good used/working shape
Fits: Husqvarna 335xpt
View
$27.75
Sold Out!
Part: walbro WT 202 carburetor
Condition: good used physical shape. May need a carb rebuild kit
Fits: Husqvarna 136, 141
View
$19.00
Ready to ship (3 in stock)
Part: (1) clutch shoe
Condition: good used/working shape
Fits: husqvarna 371, 372
View
$3.99
Ready to ship
Part: top cover engine shroud for non HD 537 20 40
Condition: good used/working shape.
Fits: Husqvarna 570, 575xp
View
$13.50
Sold Out!
Part: pump kit, includes the worm drive gear, the pump, line hose and pickup
Condition: good used/working shape
Fits: husqvarna 385xp
View
$35.00
Sold Out!
Part: 44mm bore piston and cylinder with ring, pin, bearing, keeper clips and decompression valve
Condition: good used/working shape. came off a saw with good compression, no broken fins.
Fits: husqvarna 346xp which are 2008 and newer models
View
$149.00