Orders Over $150 Ship For Free Within The USA

Cart 0

Chainsawr

SEARCH FOR PARTS

Tips for better searches

Jonsered / Jonsered

Sort by

We specialize in older jonsered chainsaws. We can identify your old jonsered chainsaw if you don’t know what it is. Tons of parts for the older all metal constructed models of jonsered. 50 51 52 52E 49sp 521 621 70E 80 90. We also have used chainsaw parts for newer turbo models and models from the 1980’s like 520 sp and 510 sp.

Starter rewind recoil spring. Jonsereds part number 504 21 26-01, 504 212601 New aftermarket part Fits many models of Jonsered. 621, 66E, 70, 70E, 80, 90, 910, 920, 930, 820, 830

sale

View

Jonsereds Crank Seal: 504 14 62-00, 504146200, 504 146200, 504 12 62 00 New reproduction part. This crankseal fits models: 49sp, 50, 51, 52, 52E, 52 E, 521 E, 521EV, 601, 621, 66e, 70, 70e, 751, 80, 801, 90, 910, 920, 930, 810, 820, 830

View

Rubber anti-vibration cushion rear trigger handle mount 504 12 50-14, 504-125014, 504125014. Male thread on one end and female on the other. High quality NEW replacement part Fits Jonsered Jonsereds 621 920 930 820 830 and others.

sale

View

Part: oil cap. Part # 504 11 09-00 Condition: good used/working shape Fits: Jonsereds 49 sp, 50, 51, 52, 52e, 70 e, 621, 80, 90

View

44mm Bore Piston kit includes: piston, ring, wrist pin, and keepers. 503 10 02-01 New AFTERMARKET part Fits Partner 5000, 5000H, 5000 Plus, 5000+, Jonsereds Jonsered 490

sale

View

Rubber lower rear trigger handle AV buffer mount. 504 12 50-33 NEW Fits Jonsered Jonsereds 820 830 920 930

sale

View

Part: starter recoil spring Part # 504 21 26 02 Condition: NEW, aftermarket part. Fits: Jonsereds chainsaws 49 sp, 50, 51, 52, 52e, 521 ev and trimmers rs52e

View

Part: ignition off switch Part # 504 38 56-02 Condition: good used/working shape Fits: Jonsereds 49 sp, 52, 52e, 521ev, 621, 70 e, 80, 90

View

Intake manifold boot, induction pipe, rubber intake gasket. 503 61 13-01, 503536601, 503 53 66-01, 503611301 NEW Fits Jonsered 625, 670, Super Champ II etc. (models where the impulse line is separate from boot and not integrated into it, this is most models).

sale

View

Choke rod. 504843119 New part from old dealer stock Fits Jonsereds models: 625, 630, 670

View

Rubber lower top handle AV buffer mount. 504 12 50-34 NEW Fits Jonsered Jonsereds 820 830 920 930

View

Rubber top and rear handle AV buffer mount. Goes on right side, next to the cylinder head. 504 12 50-32 NEW Fits Jonsered Jonsereds 820 830 920 930

View

Part Name: set of inner and outer bar plates. Part #s 504 59 03-02 & 504 03 02-01 Condition: some wear, good used/working shape Fits the Following Models: jonsered 49 sp 50, 51 52, 52e, 450, 455, 510, 520, 525, 530, 535 Location: 49sp+ bin and 450+ bin

View

Part: top front handlebar. PN 503 61 71-01 Condition: good used/working shape Fits the Following Models: Jonsereds 630, 670, 625

View

Part: Throttle link rod. PN 503 45 53-01 Condition: Good used/working shape. May vary cosmetically. Fits: Jonsered 625, 630, 670

View

Piston w/ ring, wrist pin, and clips Jonsered part number 503 62 56-01 New aftermarket part Fits Jonsered 2050 Turbo, Husqvarna 49

sale

View

Part: small av buffer mount / antivibe element for the tank Condition: good used/working shape Fits: 266, most 61 models, 268, most 272 models. Fits 61 and 272 models which have plastic (not metal) tanks and have coarse threaded mounts. Fits all models of Jonsered 625, 630, 670

View

Part: set of inner and outer bar plates. Part #s 504 59 26-00, 504 59 27-00 Condition: good used/working shape Fits: Jonsereds 70 e, 66e, 621, 80, 90, 820, 910e, 910ev, 920, 930 Location: 70e bin

View

tillotson HS carburetor. PN 504 80 06-00, HS21D C Carb in good physical condition, may need a carb rebuild kit. Fits 49SP 50, 51, 52 52E and 521 jonsered models

View

Part: air filter. Part # 504 35 71-01 Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 52e, 521

View

45mm diameter piston kit includes: piston, ring, wrist pin, and keeper clips. 503 16 38-01, 503163801 New AFTERMARKET part Fits Jonsered Jonsereds 535, 525

sale

View

Part: starter recoil spring Part # 504 21 26 06 Condition: NEW, aftermarket part. Fits: Jonsereds chainsaws 510 sp, 520 sp, 450, 455, 525, 535

View

Rubber anti-vibration cushion rear trigger handle mount 504 12 50-14, 504-125014, 504125014. Female threads in both ends. High quality NEW replacement part Fits Jonsered Jonsereds 621 920 930 820 830 and others.

sale

View

Part: intake manifold boot with support brace and clamp Part # 503 96 45-01, 503 56 00-04, 503 71 27-01 Condition: good used/working order Fits: Husqvarna 371, 372, 362, 365 and Jonsered 2071, 2171, 2065, 2165, 2063 turbo

View

Part: starter rewind spring Part # 505 29 51 26 Condition: NEW, aftermarket part Fits: Partner 500 & 5000 & Jonsered 490, 590 Location: Box E

View

Part: starter cover with pulley and spring 504 60 01-06, 504 600106 Condition: good used/working shape Fits: Jonsereds 49sp, 50, 51, 52, 52e

View

Piston kit with rings, wrist pin, and keepers. Jonsereds part number 503 08 15-01 NEW Aftermarket part Fits Jonsered 920 and 930 Series chainsaw with 54mm bore.

sale

View

44mm diameter piston kit includes: piston, ring, wrist pin, and keeper clips. 504 41 00-06, 504410006. Curiously, most Jonsereds parts diagrams do not include a part number for the piston assembly itself, but it is a component part of 504 42 00-10, 504420010. New, high quality AFTERMARKET part ...

sale

View

44mm diameter piston kit includes: piston, ring, wrist pin, and keeper clips. 504 41 00-09, 504410009, 504 410009 New AFTERMARKET part Fits Jonsered Jonsereds 525 520sp 510sp 510 520 sp

sale

View

Part: oil tank filler cap Condition: good used/working shape Fits: Jonsered 625, 630, 670

View

Replaceable rim sprocket clutch drum, 3/8" pitch 7 tooth. Jonsered part numbers: 503 17 16-01, 501 59 80-02, 501 59 80-01, 504 52 28-04, 504-52-30-08. Oregon 28563x NEW Windsor Sprocket . Fits Jonsereds 75, 751, 80, 801, 820, 830, 90, 910, 920, 930

sale

View

Part: clutch side cover. Red or red and silver in color. Fits: Jonsered 70 E, 621, 66e, 80, 90, 801 In good used shape Jonsereds part number 504 59 00-06. 504 590006, 504 59 00 06

View

Part: chain tensioner adjuster assembly. Part # 537 07 12-01 Condition: good used/working shape Fits: jonsered cs2159 and cs2156 turbo 2150, 2145 Turbo and Husqvarna 345, 350, 357 xp, 359 Husky 346 XP, 353, 346xp

View

Part: handlebar, part # 503 80 30-01 Condition: good used/working shape, some scuffing Fits: Jonsered 2163, 2171, 2172, 2165, 2065, 2071, 2063, 2163 turbo

View

Part: choke link rod and grommet Part # 504 84 31-14 Condition: good used/working shape Fits: Jonsered 510sp, 520sp, 450, 455, 525, 535

View

Part: dust cover, part # 503 75 11 03 Condition: good used/working shape Fits: Jonsered 2171, 2071 Turbo and Husqvarna 385 xp, 371, 372, 372xp, 371xp, 365, 362 special

View

Part: bucking spike dawg Part # 503 59 08 01 Condition: good used/working order Fits: Husqvarna 268, 266, 61, 272xp and Jonsered 625, 630, 670

View

Part: clutch assy-includes the rim sprocket drum, coarse thread mechanism, with new 3/8-7 rim sprocket. 501 40 32-02, 501 83 15-01 Condition: good used/working shape, with new/good used rim Fits: Jonsered 630 and Husqvarna 61, 162, 266

View

Part: flywheel air conductor cover shroud, part # 503 62 83-01 Condition: good used/working shape. Has a few small/minor chips Fits: Jonsered 2063, 2065, 2163, 2165, 2071, 2171 Turbo. Husqvarna 371, 372, 371xp, 372xp, 365 362 special

View

Part: av buffer mount for the handlebar Part # 504 10 13-00, 504 12 50-01, 504 06 53-05 Condition: good used/working shape may or may not include washer Fits: Jonsered 70 E, 49 sp, 50, 51, 52, 52e, 621

View

Part: av buffer mount. 504 12 50-02 Condition: good used/working shape Fits: Jonsered 49sp 50, 51, 52, 52e, 70e, 66e 910 e ev

View

Part Name: tillotson HK 23 HK23 series carburetor 504 80 04-16 Condition: good used physical condition, may or may not need a carb rebuild kit Fits the Following Models: Jonsered 510sp, 520sp

View

Part: chainbrake, includes the clutch cover, hand guard, brake band, spring, mechanism Condition: good used/working order, some chipping on edges Fits: late model (newer) Jonsereds 625, 630, 670 models

sale

View

Part: av buffer mount isolator for the rear handle Part # 504 12 50-14 Condition: good used/working order Fits: Jonsered 621, 920, 930

View

Part: av rubber buffer mount with cup, washer and bolts Part # 504 12 50-10, 504 06 53-04504 06 58-00 Condition: good used/woking shape Fits: Jonsereds 49 sp, 52, 52e, 521 ev, 451, 80, 90 location 90 bin

View

Part: off switch. May not have stop plate Part # 504 38 56-03 Condition: good used/working shape Fits: Jonsereds 455, 450, 525, 535, 520, 520sp

View

Part: air filter. Part # 504 35 71-07 Condition: good used/working shape Fits: Jonsered 70, 66 E

View

Part: chain tensioner screw , pin and nut. PN 504 02 00-06 and 504 59 05-03 and 732 21 14-01 Condition: good used/working shape Fits: Jonsereds 49 sp, 50 51, 52 ,52 e, 521

View

Part: fuel cap Condition: good used/working shape Fits: Jonsereds 70 E, 621, 80, 49sp 52e 50 51 52 e ev

View

Part: ignition coil Part # 504 39 17-01 Condition: good used/working shape. Tested and works with strong spark. Fits: Jonsereds 49 sp

View

Part: air filter Part # 504 35 71 21 Condition: good used/working shape Fits: Jonsered 535, 520 sp, 525 and some models of 450

View

Part: spark plug cover. Part # 504 12 56-01 Condition: good used/working shape Location: Jonsereds 49 sp, 50, 51, 52, 52e

View

PART: av buffer mount for the lower top handle PART # 504 12 50-17 CONDITION: good used/working order FITS: Jonsereds 520 sp, 510 sp, 455, 450, 535

View

Part: chain tensioning screw and adjusting pin part # 504 59 05-03, 504 01 00-21, 732 21 14-01 Condition: good used/working shape Fits: Jonsered 455, 450, 535, 510 and 520 sp

View

Part: large, front av buffer mount / antivibe element for the tank Condition: good used/working shape Fits: Husqvarna 266, most 61 models, 268, most 272 models. Fits 61 and 272 models which have plastic tanks (not metal) and which have coarse threaded mounts. Fits all Jonsered 625, 630, 670 models

View

Part: intake manifold boot and support and partition. Part # 503 92 85- 01 & 503 92 87-01 & 503 86 62-01 Condition: good used/working shape Fits: Jonsered CS-2159, cs-2156 and Husqvarna 357 xp and 359

View

Part: clutch assembly. Includes the sprocket drum, new rim mechanism, bearing and washer Condition: good used/working shape fits: Jonsered 510sp / 510 sp, 520sp / 520 sp, 525, 535, 455, 450

View

Part: nylon air filter 501 77 38 Condition: good used/working order Fits: Jonsereds 630, 670 and some other models

View

Part: starter recoil housing cover with pulley, rewind spring 503 12 38-02 Condition: good used/working shape. May NOT include decal. Fits: Jonsered 525, 535, 450, 455, 520 sp, 520sp, 510sp, 510 sp

View

bucking spike and bolts part #s 5045506-00 / 725 23 27-51 New old stock part from closed out dealer Fits: Jonsered 49sp, 52, 52E, 51, 621, 66e, 70 E, 910, 920, 930, 80, 90 series and some other models

View

Part: intake manifold boot Part # 504 12 08-09 Condition: good used/working shape Fits the Following Models: Jonsered: 510 450 455 520 525 535

View

Part: air filter cover Condition: good used/working shape Fits: Jonsered 630 625 series

View

flywheel rotor with starter pawl/ ratchet and springs in good used shape with no cracks or broken fins. Part #s 504 62 00-16, 504 6456-00, 504 21 73-01 Fits Jonsereds 49sp

View

Replaceable rim sprocket clutch drum, bearing and rim .325" pitch 7 tooth. Jonsered part numbers: 501 45 74-02, 504 52 30-02, 505 30 36-72, 504 52 30-07, 505 30 36-72, 505 30 36-61, 504 23 34-05, 504 52 00-06, 504 52 00-07, 504 52 30-02, 503 17 40-01, 501 45 74-01. Oregon 33807x, 26950x NE...

sale

View

Part: fuel gas cap with gasket, part # 504 70 26-00 and 504 13 54-00 Condition: good used/working shape Fits: Jonsered 49sp, 50, 51, 52, 52e, 521, 521e

View

Part: bucking spike dawg with bar nuts. Part # 506 01 49-01 Condition: good used/working shape Fits: Jonsered 2041, 2050, 2045, 490, 590 turbo, Husqvarna 45, 40, 49, Partner 400 500 5000 Plus

View

Part: choke rod, part # 503 70 51 01 Condition: good used/working shape Fits: Jonsered 2071, 2171, 2063, 2163 2165, 2065 Turbo

View

Part: top cover 504 60 20-44 Condition: good used/working shape Fits: Jonsered 630 Series

View

Part: recoil cover with starter pulley and spring 501 77 31-06 Condition Description:good used shape. Rope may or may not be any good. Fits the Following Models: Jonsered 630 625 670

View

Piston assembly kit includes: piston, rings, wrist pin, and keeper clips. 504 41 00-03, 504 410003, 504 41 00-03 New AFTERMARKET part Fits Jonsered Jonsereds 52 52e 521 521e 521ev and others

sale

View

.325 pitch 7 tooth clutch replaceable center drive rim sprocket assembly .325 x 7 rim and bearing included. Part numbers: 505 30 23-55, 505302355, 505 30 23 55, 503 23 26 01, 504 52 30-06, 504523006, 504 423006, 504 52 30 06, 504 52 30-01, 504 523001, 504523001, 504 52 30 01. NEW aftermark...

View

Part: set of bar nuts Part # 504 03 38-00 Condition: good used/working shape Fits: Jonsered 70e 621 and 66e

View

Part: Choke rod link - Part # 504 84 31-02 Condition: nice used shape Fits: Jonsered 49 sp, 50, 51, 52, 52e, 521

View

42mm diameter piston kit includes: piston, ring, wrist pin, and keeper clips. 503 10 44-01, 503-104401, 503104401 New AFTERMARKET part Fits Jonsered Jonsereds 450 and 455

sale

View

Part: ignition coil. 504 39 17-00 Condition: tested and in good used/working order. Fits: Jonsered 621, 80, 90, 111s Location: 621 bin

View

Part: starter housing cover with pulley, rewind spring Part # 503 69 29-02, 503 85 96-01, 503 78 92-01 Condition: good used/working order, aesthetically nice, not perfect but better than #2 Fits: Jonsered 2063, 2071, 2065, 2163, 2171, 2165, 2166, 2172 and 2163 turbo CS2163 CS2171 CS2172 CS2166

View

Part: both halves, the throttle trigger and safety lever interlock. Part #S 505 34 13-10, 504 65 55-15, 505 27 92-30, 505 27 92-13 Condition: good used/working shape. Fits: Jonsered 520sp, 525, 535, 455, 450

View

Part: filter cover and nut part #s 504 35 79-01 & 504 02 47-00 Condition: good used/working shape. some scuffs/ dings Fits: Jonsereds 621

View

Part: air filter cover knob/nut. PN 504 02 47-01 Condition: good used/working shape Fits: Jonsereds 49 sp, 50, 51, 52, 52e

View

Part: inner inside bucking spike dawg, part # 503 64 79-01, 503 64 79-02 Condition: good used/working shape Fits: Jonsered 2071, 2171, 2165, 2065, 2172, 2166 Turbo. Husqvarna 365 371 372 XP XPG 365sp special 371xp 372xp

View

Part: fuel cap with the keeper and o-ring. 501 43 14-01 Condition: good used shape Fits: Jonsered 625, 630, 670

View

Part: fuel tank handle housing with throttle trigger, cable, safety interlock lever, 2 av spring mounts, fuel cap Part # 503 71 91-71 Condition: good used/working order. Some scuffs/dings. Fits: Jonsered 2172 2171 2071 2065 2165 Turbo

View

PART: off switch 503 56 91 01 CONDITION: good used/working shape FITS: Jonsereds 625, 630, 670

View

Part: ignition coil. Part # 506 02 72-02 Condition: good used/working shape. Tested and makes strong spark Fits: Jonsereds 450, 455, 525, 535

View

Part: starter housing cover with pulley, spring and grip Condition: good used/working shape Fits: Jonsered 630, 670

View

Part: fuel cap. Part # 504 70 20-02 Condition: good used/working shape, may or may not include keeper. Varies cosmetically. Fits: Jonsered 510, 520, 525, 535, 450, 455

View

Handle anti-vibration mount spring that connects the handle to the chassis case. 506 01 46-01 NEW Fits Jonsered 2045 2041 2050 Turbo. Husqvarna 40 45 49. Partner 400

View

Oil filler cap. Jonsereds part number 504 70 20-04 In good used shape. May vary cosmetically. Fits Jonsered 490 and 590

View

Part: air filter Part # 504 35 78-01 Condition: good used/working order Fits: Jonsereds 621, 80

View

Part: carb to cylinder intake manifold boot Part # 503 61 13-01 Condition: good used/working shape Fits: some models of Jonsereds 670 which have boot type intakes

View

Part: chainbrake hand guard brake handle Part # 503 81 18-01 Condition: good used/working shape Fits: Jonsered 2071, 2171, 2065, 2063, 2165 turbo

View

Part: chainbrake brake bushing and screw bolt 504 15 00-05, 725 53 33-55 Condition: good used/working shape Fits: Jonsered 525, 535, 520sp and others

View

Part: Ignition Coil 504 62 00 19 Condition: Good Used / Working Shape. Tested with strong spark. Fits: Jonsered 510 SP, 520 SP Chainsaws

View

Part: flywheel cover shroud 501 52 61-02 Condition: good used/working shape Fits:Jonsered 625, 630 and some models of 670

View

Part: fuel tank rear trigger handle, bare bones. 501 77 27-03 Condition: good used/working shape, no breaks or leaks. Minor scuffing and fading. Fits: Jonsereds 625, 630, 670

View

Flywheel & Starter Pawls Part number 537 05 16-05 In good used shape with no breaks Fits: Jonsered 2171 Turbo Chainsaw, 2165, 2163, 2071, 2065, 2172, 2166 Husqvarna 371, 372, 365, 362, XP 371xp 372xp 365sp 362sp special

View

Part: Clutch cover with chain tensioner assembly. 537 07 20-01, 503 71 93-01 Condition: NEW Fits: Jonsered 2171, 2172, 2165, 2065, 2071, 2063, 2166 2172 turbo

View

Top handle anti-vibration mount spring that connects the handle to the cylinder head. 506 01 47-01 NEW Fits Jonsered 2045 2041 2050 Turbo. Husqvarna 40 45 49. Partner 400

View

Part: air filter Part # 504 35 71-12 Condition: good used/working order Fits: Jonsereds 910, 920, 830, 820

View

1 2 3 … 22 →