Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.
husqvarna 2100, 285, 380cd, 480 chainsaw clutch cover #2
Part: clutch sprocket guard cover Part # 501 27 49-03 Condition: good used/working order. Has a few chips on the backside missing. See photos. Fits: some models of Husqvarna 2100, 2100cd, 1100cd, 480cd, 385 cd, 480, 285
husqvarna 340 - 353 chainsaw choke rod 503 86 96-01 new aftermarket ( :) )
Part: choke rod control Part # 503 86 96 01 Condition: New aftermarket Fits: Husqvarna 340, 345, 346, 350, 351, 346xp, 353. Jonsered 2140 2145 2150 2149 2152 Turbo
Husqvarna 550 chainsaw lateral support rubber buffer 501 00 76-01 New 33-10-215
Rubber buffer mount 501007601 Condition: new aftermarket part Fits Husqvarna 550 435 450
(1 in stock)
Husqvarna 162 chainsaw fuel tank rear trigger handle #3
Part: fuel tank rear trigger handle, includes 4 av buffer mounts and the safety interlock and fuel cap 501 52 86-01 Condition: Has some corrosion on the bottom. Still in usable shape, and has been tested with no leaks. Fits: Husqvarna 162, 266se, 61, 162se
husqvarna 261, 262 xp chainsaw fuel tank rear trigger handle #3 (with tool compartment)
Part: fuel tank rear trigger handle with built-in tool compartment. Includes 1 av spring mount, interlock and trigger parts. Condition: good used/working shape. some scuff, staining, fades. No leaks. Fits: Husqvarna 261 262 xp, 262xp
Husqvarna 262xp Chainsaw 48mm Mahle Piston and Cylinder Set Type 2
48mm bore Mahle A cylinder and piston. Top end motor kit includes: cylinder head, piston, ring, wrist pin, and keeper clips. Does not have place for decompression valve In good used shape Fits Husqvarna 261, 262 XP
Husqvarna 266xp Chainsaw Inner Bar Plate 501 44 44-01
Inside inner guide bar plate 501 44 44-01, 501444401 good used shape Fits Husqvarna 61 Rancher Practica, 66, 162se, 162sg, 162 se sg, 266 se xp, 266se, 266xp, 268, 268xp, 272xp, 272, 181se, 181, 281xp, 281, 288, 288xp, 163, 163se, 180cd, 280cd, 380cd, 480cd, 180 280 380 480 285 1100 2100 cd, ...
(1 in stock)
Husqvarna 140S Chainsaw Complete Starter Recoil Assembly metal
Part Name: – Complete starter recoil cover, with all internal parts Part Description: – In good working order, nice shape. Fits the Following Models: – Husqvarna 140 s. And some other older models like 240 etc. This is for metal cases.
(1 in stock)
Husqvarna 180 Chainsaw Bucking Spike
3 point bucking spike dog. 501 27 04-01 In good used shape Fits Husqvarna 180 280 380 CD
husqvarna 40 Practica chainsaw muffler bolt and gasket set
Part: muffler bolts and exhaust gasket Condition: good used/working shape Fits: husqvarna 40 Practica
(1 in stock)
husqvarna 40 Practica chainsaw chain catcher
Part: chain catcher stop. Condition: good used/working shape Fits: husqvarna 40 Practica
(1 in stock)
Husqvarna 40 Practica Chainsaw intake shield
Intake manifold shield collar. 501 45 65-01 In good used shape Fits Husqvarna 40 Practica
(1 in stock)
Husqvarna Practica 40 Chainsaw Oiler Oil Pump Parts
Part Name: – oil pump assembly. Includes all in picture Part Description: – In good working order Fits the Following Models: – Husqvarna Practica 40. And some other older models like 140s, 240, etc.
husqvarna 44, practica 40 chainsaw fuel tank rear handle assembly
Part: fuel tank rear trigger handle assembly. Includes throttle trigger, shaft, interlock and AV mounts. 501 57 99 Condition: good used/working order Fits: Husqvarna Practica 40, 44 Rancher
husqvarna practica 40 chainsaw walbro hdc 10 carburetor
Part: walbro hdc10carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Husqvarna Practica 44, Practica 40
(1 in stock)
husqvarna 435 chainsaw crankshaft and rod
Part: crankshaft with rod Part # 544 34 38-01 Condition: good used/working shape Fits: Husqvarna 435 435e
Husqvarna 435 Chainsaw Ignition Switch Wires
Part: Ignition switch wires Condition: good used/working shape Fits: Husqvarna 435 435e
Husqvarna 435 e chainsaw clutch assembly
Part: .325 - 7 clutch spur sprocket drum, bearing, and clutch mechanism Part number: 504 71 24-02 Condition: Good Used Fits: Husqvarna 435 435e
(1 in stock)
husqvarna 435 chainsaw starter recoil cover
Part: starter recoil cover Condition: good used/working shape Fits: Husqvarna 435
husqvarna practica 44 chainsaw walbro HDA 1 carburetor
Part: walbro hda1 carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Husqvarna Practica 44, Practica 40
(1 in stock)
Husqvarna 262 chainsaw bearing 501 86 18-01
Part: wrist bearing Part Number: 501 86 18-01 Condition: Good used shape Fits: Husqvarna 262 may also fit other models
Husqvarna 262 chainsaw switch cover filler
Part: heater switch cover plug Fits: Husqvarna 262 xp and many others
(1 in stock)
Husqvarna 262xp chainsaw case bolts
Part: set of 6 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 262 xp 257
(3 in stock)
Husqvarna 42 - 272xp chainsaw shorting lead wire 501 83 98-01 (257 bin)
Part: stop switch kill shorting lead wire Part # 501 83 98 01 Condition: Good used shape Fits: Husqvarna 61 late, 268, 242, 254, 238, 272xp, 268xp, 242xp, 246, 42 Special, 254xp, 254se, 257xp, 261, 262xp. Jonsered 670, 625 Also fits some other models.
husqvarna 262 xp chainsaw oil pump and worm gear
Part: oil pump with worm gear 503 16 65 Condition: good used/working shape Fits: Husqvarna 262 XP
Husqvarna 562 XP Chainsaw Muffler Heat Shield 505 17 07-01
Muffler exhaust heat shield cooling plate. 505 17 07-01 Good used shape Fits Husqvarna 562XP 555 Autotune, Jonsered 2260 Turbo
(1 in stock)
husqvarna 240 chainsaw carb mount gasket used
Part: carburetor mount gasket Condition: good used/working order Fits: Husqvarna 240 and some other models
husqvarna 240 chainsaw bar mounting plate
Part: guide plate, PN 545 07 14-01 545071401 Condition: good used/working shape Fits: Husqvarna later model 240
(1 in stock)
husqvarna 240 chainsaw piston, cylinder and crank assembly
Part: piston and cylinder with crankshaft, rod, spring mount Condition: good used/working order, came off a saw with good compression, no breaks Fits: Husqvarna 240
(3 in stock)
Husqvarna 235 chainsaw choke rod 577 61 19
Choke rod 5776119 Condition: good used shape Fits 240 235
Husqvarna 562XP Chainsaw Chain Tensioner 575 26 04-02
Chain bar tensioner adjuster kit. 575260402, 575 26 04-02 Good used shape Fits Husqvarna 555 562xp 562 xp. Jonsered 2258 2260 Turbo
Husqvarna 550xp xpg Chainsaw Muffler Heat Deflector and Gasket
Muffler gasket and heat deflector shield. 523052401 523052501 523 05 25-01 523 05 24-01 Good used shape Fits Husqvarna chainsaw models: 550 xp, 550xpg
husqvarna 136, 141 chainsaw carb bolt
Part: carburetor bolts/ screw Condition: good used/working shape Fits: Husqvarna 136, 141
husqvarna 550 xp chainsaw brake bolt and bushing
Part: brake bolt/screw (537 20 90-01) & (577 78 02-01) Condition: good used/working shape Fits: Husqvarna 550xp
Husqvarna 550xp chainsaw starter cover hardware kit
Part: starter cover screw bolt hardware kit Condition: good used/working order Fits: Husqvarna 550 xp
(1 in stock)
Husqvarna 550XP Chainsaw cooling air conductor
Part Name: Dust Cover / baffle plate Part # 522 79 62-01 Detailed Condition Description: good used / working shape Fits the Following Models: 550 XP
Husqvarna 550xp Chainsaw Top Handle 577 79 82-01
top handle good used shape Fits Husqvarna 545, 550 xp.
Husqvarna 550xp chainsaw complete clutch cover assembly
Part: clutch sprocket cover with chain tensioner assembly and chain brake assembly, 505 19 90-05 Condition: good usable/working order may or may not include decal Fits: Husqvarna 550xp, 550 xp
Husqvarna 550XP Chainsaw Fuel Tank Handle assembly
Fuel tank, rear trigger handle assembly. 577 79 02-03 522 87 42 good used shape Fits Husqvarna 550 XP 550XP
(1 in stock)
Husqvarna Practica 44 Chainsaw lot of assorted hardware
Part: Screws and miscellaneous hardware Condition: Good used/working condition Fits: Husqvarna Practica 44
(1 in stock)
husqvarna 44, 444 chainsaw screw pn 501 82 51-01
Part: starter screw Part # 501 82 51 01 Condition: good used shape Fits: Husqvarna 44, 444 Location: Husky Bin H-11
Husqvarna Practica 44 Chainsaw Flywheel w/ Starter Pawls #2
Part: Flywheel with starter pawls 501 67 51 5016751 Condition: Good used/working condition. No broken fins Fits: Husqvarna 44
husqvarna 266 chainsaw handle cover filler set (for metal tanks) #2
Part: set of screw on handle filler covers for the rear handle. Includes all in picture Condition: good used/working order: Fits: 266 models which have metal tanks
(1 in stock)
Husqvarna 133 chainsaw starter cover and pulley assembly (44 bin)
Starter assembly for Husqvarna 133. Includes cover, pulley, recoil spring and grip. 501 63 01, 501 63 03 Good used working shape Fits Husqvarna 133
husqvarna 61 rancher chainsaw top cover shroud #2
Part: top cover engine shroud Condition: good used/working condition, has some cracks/melting. See photos. Fits: Husqvarna 61 practica and 61 rancher
husqvarna 268, 272xp chainsaw top cover cylinder shroud 503 40 60-01
Part: top cover cylinder shroud Replaces Part # 503 40 60 01 Condition: good used shape Fits: Husqvarna 268 61 268xp and some models of 272 xp
Husqvarna 435 chainsaw crankcase tank chassis housing with bar studs
Part: crank case tank chassis housing with bar studs Condition: good used/working order Fits: Husqvarna 435 435e
(1 in stock)
Husqvarna 435 chainsaw handle bar hardware kit #1
Part: handlebar hardware kit Condition: good used/working order Fits: Husqvarna 435, 435e
Husqvarna 435 e chainsaw clutch spur sprocket
Part: .325 - 7 clutch spur sprocket drum Part number: 504 71 24-02 Condition: Good Used Fits: Husqvarna 435 435e
(1 in stock)
Husqvarna 435 Hose, airpurge suction line 544 40 19-01
Part: line Part number: 544 40 19-01 condition: used, good shape Fits: 435 435e
(2 in stock)
Husqvarna 435 chainsaw muffler kit
Part: muffler, heat shield and exhaust gasket Part # 544 14 77-02 Condition: good used/working order Fits: Husqvarna 435
(2 in stock)
Husqvarna 435 e Chainsaw Flywheel Cover Air Baffle
Part Name: air baffle, flywheel cover shroud. 544 19 71-02 Condition Description: in good used shape-no breaks Fits the Following Models: Husqvarna 435 435e This is a USED part, in good working order.
Husqvarna 435 e chainsaw muffler heat shield
Part: muffler heat shield deflector part number: 501 32 31-01 Condition: good used/working shape Fits: husqvarna 435 e 435e
Husqvarna 435 chainsaw ignition coil
Part: ignition coil module 573 93 57-01 573 93 57 01 Condition: good used/working order. Tested and works with good spark Fits: Husqvarna 435
Husqvarna 575 xp, 570 576xp chainsaw top cover shroud type 2 (HD type) #2
Part: top cover / engine shroud for hd Condition: good used/working shape. Has a couple of minor cracks and resin build up. Fits: Husqvarna 575xp, 570 , 576 xp
Husqvarna 55 Chainsaw Starter Spring OEM 501 76 31-01 NEW (Misc 1Q)
Starter recoil rewind spring. Husqvarna part number: 501 76 31-01, 501763101 New Fits Husqvarna 50 51 55, 55 Rancher, 335, 338 xpt and others
Husqvarna 61, 266 + chainsaw carburetor gasket
Part: gasket Condition: good used shape Fits: Husqvarna 61, 266
(1 in stock)
Husqvarna 61, 480, 180 s chainsaw intake gasket pn 501 25 10-01
Part: intake gasket Part # 501 25 10 01 Condition: good used shape Fits: Husqvarna 61, 480, 180 s
Husqvarna 61 - 162se chainsaw small fine machine thread av buffer mount for metal tank 501 53 05-01
Part: small rubber machine thread av buffer mount absorber / antivibe element for models that have metal tanks Part # 501 53 05 01 Condition: good used shape Fits: Husqvarna 162, 61 Rancher Practica, 162se 162sg, Practica 40, 140, 240 s, 240s, 44, 444 and other older models which have metal tan...
(1 in stock)
Husqvarna 162se Chainsaw Idle Speed Screw
Part: Idle speed screw Condition: Good used/working shape Fits: Husqvarna 162se
(2 in stock)
Husqvarna 238, 242, 42, 246 chainsaw small antivibe element mount pn 501 83 56-01
Part: small av buffer mount / antivibe element Part # 501 83 56 01 Condition: used, good working order Fits : Husqvarna 242, 42, 246, 238 42 bin
(1 in stock)
Husqvarna 42 Special Chainsaw Pre Filter
Part: pre air filter Part # 501 62 95-01 Condition: good used/working shape Fits: Husqvarna 42 Special
(2 in stock)
Husqvarna 42 chainsaw crankcase half - right side
Part: crank case housing half, right side 501 62 06-01 Condition: good used/working shape Fits: Husqvarna 42 and some models of 246
(1 in stock)
Husqvarna 371, 372, 365, 362 chainsaw air filter cover new (bulky-1001 bin)
Part: air filter cover - standard size Part # 503 62 80 01 503 62 80-01 Condition: new aftermarket part Fits : Husqvarna 371xp, 362, 365 Location: Bulky 1001 bin
Husqvarna 550xp chainsaw handle bar hardware kit
Part: handlebar hardware kit Condition: good used/working order Fits: Husqvarna 550 xp
Husqvarna 372 sleeve (h-39)
Part: crankshaft sleeve for oiler 503 77 91 01 Condition: OEM New Old Stock Fits: 372 xp, 2171
(1 in stock)
Husqvarna 575 Brake Cover (H-39)
Part: Brake mechanism cover 537 20 32 01 Condition: New Old stock from closed out dealer Fits: 570, 575, 575xp, 576xp
Husqvarna 340-350 Chainsaw Starter Pawl NEW 503 89 50-01 (H-0014)
(1) Starter pawl for flywheel. 503895001 New part from old dealer stock Fits Husqvarna chainsaw models: 340, 345, 350
Husqvarna 266, 61 Chainsaw Woodruff Key NEW 735 88 05-00 (H-0014)
Woodruff key. 735880500 New part from old dealer stock Fits Husqvarna chainsaw models: 266, 61
(3 in stock)
Husqvarna Chainsaw Screw NEW 503 21 70-10 (H-0014)
Screw. 503217010 New part from old dealer stock fits some models of Husqvarna chainsaws
(1 in stock)
Husqvarna Screw NEW 574 82 27-01 (H-0014)
Screw 574822701 New part from old dealer stock
(1 in stock)
Husqvarna Throttle Shaft NEW 503 63 57-01 (H-0014)
Throttle Shaft, 503635701 New part from old dealer stock
(1 in stock)
Husqvarna Chainsaw Nut NEW 503 22 24-02 (H-0014)
Husqvarna nut. 503222402 New part from old dealer stock
Husqvarna Bar Adjusting Pin NEW 530 02 34-92 (H-0014)
Bar adjusting pin. 530023492 New part from old dealer stock
Husqvarna Saw Screw NEW 503 21 53-21 (H-0014)
Screw. 503215321 New part from old dealer Husqvarna stock
(2 in stock)
Husqvarna 335xpt, 338xpt Chainsaw Throttle Trigger Spring NEW 503 85 13-01 (H-0014)
Throttle trigger spring. 503851301 New part from old dealer stock Fits Husqvarna 335, 338 xpt
Husqvarna 5525, 6026, 6027, 9030 Pressure Washer O-Ring KIt NEW 531 30 75-44 (H-0014)
O Ring Kit. 531307544 New part from old dealer stock Fits Husqvarna pressure washer models: 5525PW, 6026PW, 6027PW, 9030PW
(1 in stock)
Husqvarna 232 L, 232 R, 235 R, 225 R Trimmer Throttle Housing LH NEW 503 72 12-01 (H-0014)
Throttle Housing, LH. 503721201 New part from old dealer stock Fits Husqvarna trimmer models: 232L, 232R, 235R, 225R/RD/L/LD
(1 in stock)
Husqvarna 125 BT Blower O-ring NEW 531 00 96-28 (H-0014)
O Ring. 531009628 New part from old dealer stock Fits Husqvarna blower models: 125BT
(2 in stock)
Husqvarna 346xp, 353 Chainsaw Nylon twist on Air Fitler 537 02 40-02 (H-0014)
Nylon twist on type air filter. 537024002 from old dealer stock. May be black or yellow. Will have some dust/dirt from years of storage. Fits Husqvarna chainsaw models: 346 xp, 353
(1 in stock)
Husqvarna 225 L/LD/R/RD/RJ, 235 R Trimmer Throttle Housing and Switch Assembly NEW 503 72 13-01 (H-0014)
Throttle housing half with switch assembly. 503721301 New part from old dealer stock Fits Husqvarna trimmer models: 225 L/LD/R/RD/RJ, 235R
(1 in stock)
Husqvarna Trimmer Screw NEW 725 23 79-51 (H-0014)
Husqvarna screw. 725237951 New part from old stock dealer
(1 in stock)
Husqvarna 371 K Power Cutter Diaphragm NEW 537 00 19-01 (H-0014)
Diaphragm. 537001901 New part from old stock dealer Fits Husqvarana 371K cut off saws
(4 in stock)
Husqvarna 357xp, 359 Chainsaw Screw NEW 503 20 07-76 (H-0014)
Screw. 503200776 New part from old dealer stock Fits Husqvarna chainsaw models: 357 xp, 359
(1 in stock)
Husqvarna Block Off Plate NEW 502 54 11-01 (H-0014)
Block off plate. 502541101 New part from old dealer stock
(1 in stock)
Husqvarna 23/26 LC, 32 LC Trimmer Shaft 530 09 45-51 (HVA Bulky 1000)
Shaft. 530094551 Fits Husqvarna trimmer models: 23, 26 LC, 23 LCN, 32 LC
Husqvarna 32R Trimmer Shaft 530 09 45-66 (HVA Bulky 1000)
Shaft. 530094566 Fits Husqvarna trimmer models: 32 R
Husqvarna 22, 25 R RL Trimmer Throttle Cable NEW 502 16 45-01 (HVA Bulky 1000)
Throttle Cable. 502164501 New part from old dealer stock Fits Husqvarna trimmer models: 22R/RL, 25R/RL
Husqvarna 128 L, 129 L Trimmer Handle NEW 545 04 22-01 (HVA Bulky 1000)
Trimmer Handle. 545042201 New part from old dealer stock Fits Husqvarna trimmer models: 128L, 129L
(1 in stock)
Husqvarna Trimmer Shaft 530 09 52-21 (HVA Bulky 1000)
Shaft. 530095221 Fits Husqvarna trimmer models: 322C, L, R. 325C, C-X, L-X, R-X/ 325 L, L-XT, R-XT/ 325RJ-X
Husqvarna BV32 Blower-Vac Fan Housing Kit NEW 530 06 97-14 (HVA Bulky 1000)
Fan /Starter Housing kit. 530069714 New part from old dealer stock Fits Husqvarna Blower Vac model: BV-32
(1 in stock)
Husqvarna 225RJ Trimmer Starter Housing Cover 502 19 63-01 (HVA Bulky 1000)
Starter recoil housing cover with grip. 502196301 Fits Husqvarna trimmer models: 225 RJ
Husqvarna 562xp Chainsaw Screw 503 20 08-02 NEW (H-0013)
Screw. 503200802 New part from old dealer stock Fits Husqvarna chainsaw models: 562 xp
Husqvarna Trimmer Air Filter 537 33 72-01 NEW (H-0013)
Air filter. 537337201 New part from old dealer stock Fits some Husqvarna trimmer models
husqvarna 394, 395, 371 Chainsaw Screw NEW 503 21 05-22 (H-0013)
Screw. 503210522 New part from old dealer stock Fits Husqvarna chainsaw models: 394, 395, 371
(1 in stock)
Husqvarna 165BT, 145BT Blower Square Nut NEW 531 00 44-79 (H-0013)
Square nut. 531004470 New part from old dealer stock Fits Husqvarna blower models: 165 BT, 145 BT
Husqvarna K750, K760 Cut Off Saw Screw NEW 503 21 53-40 (H-0013)
Screw. 503215340 New part from old dealer stock Fits Husqvarna K-750, K-760
Husqvarna 580, 560 BFS, 170 BF Blower Washer NEW 514 33 67-01 (H-0013)
Washer. 514336701 New part from old dealer stock Fits Husqvarna blower models: 580BFS, 560BFS, 170BF
(1 in stock)
Husqvarna 357xp, 359 Chainsaw 3/8"x7T Clutch Sprocket NEW 503 93 48-01 (H-0013)
3/8"x7T rim type sprocket only. 503934801 New part from old dealer stock Fits Husqvarna chainsaw models: 357 xp, 359