Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.
husqvarna 285, 2100, 2101 chainsaw screw pn 501 58 65-01 new bin h-51
Part: screw Part # 501586501 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years or storage Fits: Husqvarna 285, 298, 2100 Location: bin H-51
husqvarna 266xp chainsaw left, flywheel side crankcase half
Part: crank case half (left, flywheel side) 501 68 53 Condition: good used/working shape. Has some minor chipping. Fits: Husqvarna 266 xp
(1 in stock)
Husqvarna 266 XP chainsaw cylinder and piston kit #2
Complete piston and cylinder top end kit. 50mm bore Mahle. Cylinder, piston with ring, wrist pin, bearing, keepers. 501 68 55-71 In good used shape. A few broken fins. Fits Husqvarna 266, 66, 266 SE SG XP, 266SE, 266XP
Husqvarna 340, 345, 350 chainsaw clutch cover with brake #3
Part: chainbrake clutch cover guard with brake band, cover, spring, levers Part # 537 10 78-03 503 89 02 Condition: good used/working order. Fits: Husqvarna 340, 345, 350, 351, 353, 346xp
(1 in stock)
husqvarna 266se chainsaw right, clutch side crankcase half #2
Part: crank case (right, clutch side) Condition: Bearing is NOT good. In good used/working shape Fits: Husqvarna 266 se
husqvarna 61 chainsaw starter recoil cover and pulley assembly #9
Part: starter housing cover with pulley, grip, and rewind spring Condition: good used/working shape. Fits: came off a Husqvarna 61, will also fit 266
husqvarna 266xp chainsaw lot of assorted hardware #2
Part: lot of misc. hardware - bolts, screws, clips, washers (includes everything pictured) Condition: good used/working order Fits: Husqvarna 266 xp
(1 in stock)
Husqvarna 181-288 Chainsaw Cable Grommet 501 27 13-02 new (H-0010)
Carb sleeve/grommet. 501806901 New part from old dealer stock Fits Husqvarna chainsaw models: 181, 281, 288
(2 in stock)
husqvarna 181 chainsaw screw for full wrap handles 503 21 14-03 new (h-15)
Part: screw bolt for full wrap handles Condition: new old stock. Fits: Husqvarna 181
husqvarna 162 chainsaw air filter black, nylon new 501 52 43-03 (H-58)
Part: air filter 501 52 43-03 Condition: new old stock from closed out dealer. Fits: Husqvarna 162 SE SG, 162SE, 162sg, 61 Practica Rancher
husqvarna 266, 66 chainsaw intake manifold bolt 503 20 21-12 new (H-46)
Part: screw bolt for the intake manifold Part # 503 20 21 12 Condition: new old stock from closed out dealer Fits: Husqvarna 266, 66
(1 in stock)
Husqvarna 44 Chainsaw Choke Rod Grommet new old stock 501 47 79-02 (H-40)
Part Name: Choke Rod Grommet Condition: new old stock from closed out dealer Fits: Husqvarna 44 chainsaws
(1 in stock)
Husqvarna 44 Chainsaw Choke Rod 501 79 78 new (h-40)
Part Name: Choke Rod 501797802 Condition: New old stock from closed out dealer Fits: Husqvarna 44 chainsaws
(1 in stock)
Husqvarna 371, 372, 362, jonsered 2171, 2071, 2063 chainsaw intake boot support square nut 503 22 65-03(H-40)
Part: boot support mount square nut, part # 503226503 Condition: new old stock from closed out dealer Fits: Husqvarna 371, 327, 362 and jonsered 2071, 2171, 2063 turbo
(1 in stock)
Husqvarna 66 266 272 Chainsaw Oil Pump Pin Shaft 501 51 32-01 (H-40)
Part Name: oil pump shaft 501513201 Condition: new old stock from closed out dealer. Dusty/dirty/may have slight surface rust from years of storage. Fits: some models of Husqvarna 61 266 266xp 268 272 272xp Jonsered 625 630 670
(3 in stock)
Husqvarna 66 266 272 Chainsaw Oil Pump Pin 720-123750 (H-40)
Part Name: oil pump pin 720 12 37-50 Condition: new old stock from closed out dealer. Dusty/dirty/may have slight surface rust from years of storage. Fits: some models of Husqvarna 61 266 266xp 268 272 272xp Jonsered 625 630 670
(1 in stock)
Husqvarna 66 266 272 Chainsaw Oil Pump Drive Gear 501 51 31-01 (H-40)
Part Name: oil pump drive gear 501 51 31-01 Condition: new old stock from closed out dealer. Is dirty/dusty and may have some slight surface rust from years of storage. Fits: some models of Husqvarna 66 266 272
Husqvarna 372 268 272 chainsaw metric flange bar nut pn 503 22 00-01 (h-40)
Part: metric flange bar nut, part # 503 22 00 01 Condition: new old stock Fits: Many Husqvarna, Jonsered, Partner, Stihl chainsaw models
Husqvarna 36, 41, 141, 136 and jonsered 2036 chainsaw chain tensioner adjuster pin new pn 530 01 58-26 (hva box 75)
Part: chain adjusting pin Part #: 530 01 58-26 530015826 Condition: new, old stock from closed out dealer. Fits: Husqvarna 36, 41, 136, 141, 137, 142 and Jonsered 2036, 2040 and many Poulan and Craftsman chainsaws.
Husqvarna 335 xp chainsaw oil pump drive gear 503 78 92-01 new (H-12)
Part: oil pump drive gear Part # 503 78 92-01 Condition: new old stock from closed out dealer Fits: Husqvarna 335xpt, 338, 338XPT, 335 xpt
(1 in stock)
husqvarna 570, 575 xp chainsaw ground wire new 537 20 87-01 (H-58)
Part: ground stop wire, part # 537 20 87-01 Condition: new old stock from closed out dealer Fits: Husqvarna 570, 575xp
(1 in stock)
Husqvarna 575xp Chainsaw Tank AV spring mount 537 21 03-03 new (H-12)
front av buffer spring handle mount for the gas tank. STD. 537210303 new old stock from closed out dealer Fits Husqvarna 570 575xp 576xp 575 576 xp
(2 in stock)
Husqvarna 575xp Chainsaw Tank AV spring mount 537 21 03-01 new (H-12)
Side av buffer spring handle mount for the gas tank. STD. 537 21 03-01 new old stock from closed out dealer Fits Husqvarna 570 575xp 576xp 575 576 xp
husqvarna 372xp - 390xp chainsaw sprocket retaining washer NEW 503 75 24-01 (h-12)
Part: 12mm clutch sprocket washer Replaces Husqvarna Part Number: 503 75 24 01 Condition: new, old stock from closed out dealer. Has some surface rust from years of storage. Fits: Husqvarna 371, 372, 362, 365, 570, 575, 385, 390 XP Special, SP. 362sp, 365sp, 371xp, 372xp, 385xp, 390xp, 575xp, 5...
husqvarna 136, 141 chainsaw intake sleeve/boot new (H-12)
Part: intake sleeve. Part # 530029814 / 530-029814 530 02 98-14 Condition: New old stock from closed out dealer Fits: Husqvarna 141, 136, 137, 142, Jonsered 2036, 2040
(1 in stock)
Husqvarna 455 Rancher Chainsaw Piston Ring NEW 503 28 90-50 (H-0012)
Piston ring. 503289005 New part from old dealer stock Fits Husqvarna 455 Rancher
(4 in stock)
Husqvarna 350, jonsered 2150 turbo chainsaw worm drive gear replaces pn 503 89 22-02 new (H-12))
Part: oil pump worm gear (for .325x7 spur) Condition: new old stock from closed out dealer. Part # 503 89 22 02 Fits: Husqvarna 350 and Jonsered 2150 turbo
(3 in stock)
Husqvarna 385xp Chainsaw Cylinder AV mount spring NEW OEM 503 52 87-02 (H-15)
Cylinder head mounted AV buffer spring 503 52 87-02 NEW old stock from closed out dealer. May be dusty/dirty from years of storage. Fits 385 390 xp, 390xp, 394xp, 395xp, 390xp. Jonsered 2186, 2188 Turbo and others
Husqvarna 359, 357xp, 455, 460, 340, 345, 350, 346xp and Jonsered 2159, 2149, 2141, 2145, 2150, 2147 rancher chainsaw rubber crankcase bumper new 503 86 92-01 (H-24)
Part: rubber crankcase bumper plug. Part # 503 86 92-01 Condition: new old stock from closed out dealer Fits: Husqvarna 455 rancher, 460, 340, 345, 350, 359, 357xp and Jonsered 2149, 2159, 2141, 2145, 2150, 2147
(3 in stock)
Husqvarna 372, 365, 570, 575 xp chainsaw oil pump gear type 2 pn 537 20 78-04 new (h-24)
Part: oil pump drive worm gear pinion. Part # 537207804 Condition: new old stock. May have some slight surface rust from years of storage. Fits: Husqvarna 570, 575xp 372 365
Husqvarna 340, 345, 350, 346xp, 353, 351 and jonsered cs 2149, 2141, 2145, 2150 chainsaw av spring mount for the handle pn 503 89 83 01 new (H-24)
Part: cylinder av spring mount for the handlebar. Part # 503 89 83-01 Condition: new old stock from closed out dealer. Fits: Husqvarna 340, 345, 350, 353, 351, 346 xp, 435, 455 460 Rancher and jonsered cs 2141, 2145, 2150, 2149 turbo
(4 in stock)
Husqvarna 154, 254 chainsaw gasket 501 86 25-01 new h-24
Part: gasket. part # 501862501 02 Fits: Husqvarna 154, 254 Condition: new old stock from closed out dealer
(3 in stock)
husqvarna cutoff saw 5 x 28 bolt 503 20 00-16 new bin h-24
Part: 5 x 28 screw bolt Part # 503200016 503 20 00 16 Condition: New old stock. May have slight surface rust from years of storage. Fits: Some Husqvarna cut off saws Location: Bin-24
(2 in stock)
husqvarna K750 cutoff saw square muffler nut new 503 22 65-04 bin h-24
Part: square muffler nut Part # 503226504 503 226504 Condition: New old stock. May have slight surface rust from years of storage. Fits: Husqvarna K750 K760 K 750 760 Location: Bin-24
husqvarna 51, 55 chainsaw muffler bolt
Part: bolt for the muffler Part # 503 21 82-02 Condition: good used/working order Fits: Husqvarna 51 and 55
husqvarna 340, 345, 350 chainsaw clutch cover with brake #1
Part: chainbrake clutch cover guard with brake band, cover, spring, levers Part # 537 10 78-03 503 89 02 Condition: good used/working order. Fits: Husqvarna 340, 345, 350, 351, 353, 346xp
husqvarna 350 chainsaw starter recoil cover only
Part: starter housing cover only Condition: good used/working order Fits: came off a Husqvarna 350, should also fit some models of 345 and 340
(2 in stock)
husqvarna 50, 51, 55 rancher ignition wire
Part: switch lead wire, PN: 503 16 31 01 Condition: good used shape Fits: Husqvarna 50, 51, 55 Rancher
Husqvarna 55 chainsaw 46mm cylinder
46mm cylinder Good used OEM cylinder Fits: Husqvarna 55, 55 rancher, 51
husqvarna 50, 45 + chainsaw oil pump drive gear pn 503 10 49-02
Part: oil pump worm drive gear / wheel Part # 503 10 49 02 Condition: good used shape Fits: Husqvarna 40, 45, 50, 51, 55 Location: Bin H-50
husqvarna 357xp, 359 chainsaw fuel tank rear trigger handle assembly #2
Part: fuel tank with 2 av spring mounts, throttle trigger, safety interlock lever, fuel cap, fuel line. May not include chip guard. Condition: good used/working order. Has some staining and scratches. Fits: Husqvarna 357 xp, 359
husqvarna late model 61 chainsaw top cover #3
Part: top cover engine shroud 503 61 00-03 Condition: good used/working order. Has a melted spot. Fits: Husqvarna some models (late) of 61, 268
husqvarna 359, 357 xp clutch side crankcase half #3
husqvarna 359,357xp clutch side crank case half does not include bearing or seal good used working condition some scratching wear. Has a chip missing - see photos fits husqvarna 359, 357xp
(1 in stock)
Husqvarna 455 Rancher filter mount control panel with switch and choke (no filter clip)
Part : Control Panel, includes the off switch, choke, and filter mount Part #s 537 32 30-01, 537 25 56-01, 537 25 55-01 + Detailed Condition Description: good used/working shape Fits the Following Models: husqvarna 455 rancher
(1 in stock)
Husqvarna 562 XP Chainsaw Throttle Cable 521 88 79-01
Throttle control cable. 521 88 79-01 Good used shape, may be tan or grey in color. Fits Husqvarna 562XP 555 Autotune, 550xp 550 xp 545 Jonsered 2260 cs 2258 2253 2252 Turbo
husqvarna 266 chainsaw starter recoil cover and pulley assembly #8
Part: starter housing cover with pulley and rewind spring Condition: good used/working shape. May not have decal Fits: came off a Husqvarna 61, will also fit 266
(1 in stock)
Husqvarna 2100cd Chainsaw case bolt screw set
set of case crankcase screw bolts In good used shape Fits Husqvarna 2100 cd
(1 in stock)
husqvarna 562 xp chainsaw top handle bar
Part: top front wrap handlebar 575 38 89-01 Condition: good used/working shape. Some dings and scratches on handle and gripping. Fits: Husqvarna 562xp
(1 in stock)
Husqvarna 181, 281, 288 chainsaw starter cover only #2
Part: recoil, rewind starter cover only, no internal parts Condition: good used/ working shape may have scuffing /scratching. Has some broken grills. Fits: Husqvarna 181, 281, 288
Husqvarna 562 chainsaw ignition coil 506 49 28-02
ignition coil with lead 506492802 Good used shape. Has been tested and has good spark. Fits some models of 562 xp 562xp
(1 in stock)
husqvarna 136, 141 chainsaw carb grommet type 3
Part: carburetor grommet Part # 530-037466 Condition: good used/working shape Fits: some models of husqvarna 136, 141 Use with thefollowing carburetors:Zama C1Q---W6Walbro WT--- 289Walbro WT--- 540Walbro WT--- 542(Please Note : The different styles willnot interchange.)
Husqvarna Cylinder Gasket for 385, 385XP, 390, 390XP chainsaws 537 00 57-01
Part: Cylinder gasket, 537 00 57-01 Condition: good used shape Fits: 385, 385XP, 390, 390XP Jonsered cs2186 cs 2186 cs-2186
Husqvarna 254 Chainsaw Carb Adjust Grommet 501 86 24-01 new (H-58)
Carburetor adjustment screw grommet guide. 501862401 new old stock Fits Husqvarna 254 154 and others
(2 in stock)
husqvarna 562 xp chainsaw crankcase chain guide
Part: crank case chain guide Part # 577 38 66-01 577386601 5773868 Condition: good used/working shape Fits: Husqvarna 562xp
(1 in stock)
Husqvarna 36, 41 Chainsaw Isolator Limiter
Isolator limiter 530 05 24-39 In good used shape Fits Husqvarna 36, 41, 136, 141 and others
husqvarna 40, 45 chainsaw rear trigger handle assembly
Part: rear trigger handle with both casing halves, throttle cable, trigger and safety interlock. 503 10 56-02, 503 50 52-02 Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 288 chainsaw filter mount type 2 501 80 62-02 new (H42)
Part: filter mount 501806202 Condition: new old stock from closed out dealer Fits: Husqvarna 288, 281, 288XP lite
(2 in stock)
husqvarna 288 chainsaw filter mount 501 80 62-01 new (H42)
Part: filter mount 501806201 Condition: new old stock from closed out dealer Fits: Husqvarna 288, 281, 288XP lite
(1 in stock)
husqvarna 394, 395 chainsaw av spring mount std pn 503 46 88-01 new (h-14)
Part: antivibe element / av spring mount Part # 503 46 88 01 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 394, 395
(1 in stock)
husqvarna 394, 395 chainsaw av spring mount std pn 503 46 95-01 new (h-14)
Part: antivibe element / av spring mount Part # 503 46 95 01 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 394, 395
(1 in stock)
Husqvarna 394 Chainsaw Tank AV Spring Mount new 503 46 85-01 (H-14)
Part Name: Tank AV Spring Mount 503 46 85-01 Condition: new old stock Fits: Husqvarna 394 chainsaws-Husky 395XP, 395 xp
(1 in stock)
Husqvarna 240 chainsaw lot of assorted hardware
Lot of assorted hardware. Includes all in photo. good used working condition fits husqvarna model 235 240 E 235e 240e chainsaw
Husqvarna 235 chainsaw clutch cover chainbrake (regular bar stud type) #2
Complete brake assembly side cover. 545 07 11-03, 525 62 89-01 In good used shape. Has some scuffs and dings. Fits newer Husqvarna 235, 240e etc.
(2 in stock)
husqvarna 181, 281, 288, 385 ++ chainsaw oil seal new replaces pn 503 26 02-05 (H-14)
Part: oil seal. Replaces Husky part # 503 26 02 05 Condition: new old stock part Fits: Husqvarna 181, 281, 288, 298, 385, 394, 395, 2100, 2101, 3120, 1100, 285
(1 in stock)
husqvarna bracket pn 501 57 33-01 new (H-14)
Part: bracket plate Part Number: 501573301 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: some Husqvarna models
(1 in stock)
husqvarna 346 xp chainsaw ignition off switch only
Part: off switch, 503 86 95-01 Condition: good used/working shape Fits: Husqvarna 346xp
husqvarna Jonsered filter mount pn 504 35 86-10 new (h-15)
Part: filter mount, Part # 504 35 86-10. Black or white in color. Condition: new old stock from closed out dealer. Fits: some models of Jonsered 625, 630. Husqvarna 266, 61, 66. These saws have varying filter mounts so check yours to make sure it matches.
(1 in stock)
Husqvarna 154 chainsaw Recoil Starter Spring shield 501867901 new (H-15)
Part Name: recoil spring shield cassette Part Description: New old stock from closed out dealer Fits the Following Models: Husqvarna 154
(2 in stock)
husqvarna 266 chainsaw bar guide bolt 501 81 57-01 new (h-15)
Part: guide bar bolt 501 81 57-01 Condition: new old stock. Has some slight surface rust/oxidation from years of storage. Fits: Husqvarna 266xp, 266se, 266sg, 266 se xp sg, 61, 61 Rancher, 66, 162se, 162 sg, 268, 272xp, 272 XPG and others 181 281 288 288xp and Jonsered 2077 2083 2171 2163 2165 20...
(4 in stock)
husqvarna 365, 362, 371, 372 chainsaw av spring mount (hard) new pn 503 89 56-01 (box h-15)
Part: av spring mount - standard. Mounts onto the side of the fuel tank Part Number: 503 89 56 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 365, 362, 372, 371 Location: Box H-15
(1 in stock)
husqvarna 50 old model chainsaw clutch brake cover only #2
Part: clutch cover for chainbrake - cover only Condition: good used/working shape. Has a melted area and some damage from the chain. See photos. Fits: older model (early) Husqvarna 50
(1 in stock)
Husqvarna 162se Chainsaw head bolt set
cylinder head screw bolts In good used shape Fits Husqvarna 162 se
(1 in stock)
Husqvarna 55 Chainsaw Base Gasket 503 16 21-03 used
Cylinder head gasket. 503 16 21-03 Good used shape Fits Husqvarna 50 51 55 55 Rancher and others
husqvarna 61 chainsaw muffler with bracket, bolts, and gasket (non spark arrestor type)
Part: non spark arrestor type muffler with bracket, muffler bolts, nuts, and exhaust gasket (bolts and nuts not pictured but included) Condition: good used/working order Fits: Husqvarna 61, 162
(1 in stock)
husqvarna 50 chainsaw filter retainer pn 501 76 28-01
Part: filter retainer mount Part # 501 76 28 01 Condition: Good used shape Fits: Husqvarna 50
(2 in stock)
husqvarna 50 51, 55 chainsaw muffler type 1
Part: muffler. Type not equipped to take a spark arrester screen. Condition: good used/working shape. May have some surface rust or small dents. Fits: husqvarna 50 51 55
(1 in stock)
husqvarna 50 chainsaw complete starter recoil cover and pulley assembly #2
Part: starter housing cover with pulley, rewind spring, grip, Part # 503 60 88-03, 505 30 37-35, 501 76 31-01, 503 54 39-01 Condition: good used/working shape. Has a couple broken grills. Fits: Husqvarna 50
(1 in stock)
Husqvarna 242 Special Chainsaw flywheel and starter pawls assembly
Part Name: flywheel with starter pawls / springs / studs. Part number: 501632780 501 63 27-80 501632601 501 63 26-01 Condition Description: in good used shape Fits the Following Models: Husqvarna 242
Husqvarna 242 chainsaw walbro hda84 carburetor
Part: walbro hda 84 carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Husqvarna 42 Special, 242, 246, 242xp xp
Husqvarna 455 Rancher Chainsaw Crankcase Tank #3
Crankcase case chassis bar oil and fuel gas tank assembly. 537 28 20-02 In good used shape. Has some damage from the chain. See photos. Fits Husqvarna 455 Rancher, 460
husqvarna 61, 268, 272 xp chainsaw flywheel only used type 1 non cast key (part # 501 77 82-02)
Part: NON cast key flywheel only. Part # 501 77 82-02, Condition: Good used/working shape. No broken fins Fits: some models of Husqvarna 61, 268, 272 xp
(1 in stock)
husqvarna 268 chainsaw crankshaft (cast key type)
Part: crank shaft and connecting rod Condition: good used/working order Fits: Husqvarna 268 chainsaw models which have cast key flywheels and fine thread clutch mechanisms
Husqvarna 2100cd 2101xp Chainsaw Tank Handle assembly #1
Rear trigger handle. Fuel and oil tank assembly. Includes the tank handle, manual oiler, rubber mounts, trigger, inter lock, oil pump button, and fuel/oil caps. 501 57 12-03 In good used shape, no breaks, no leaks. Fits Husqvarna 2100 CD, 2100, 2101, 2101 xp, 298xp, 298 and others.
(1 in stock)
Husqvarna 45 Chainsaw Cylinder
Cylinder Good used shape Fits Husqvarna 45 saws
husqvarna 455 rancher chainsaw wrist pin bearing and clips
Part: piston wrist pin, clips, bearing Condition: good used/working order Fits: Husqvarna 455 rancher
Husqvarna 268, 272xp chainsaw fuel tank rear trigger handle Complete #2
Part: Complete fuel tank rear trigger handle housing includes: gas tank handle, 6 rubber av buffer mounts, throttle trigger, trigger safety interlock, throttle return spring, and vent. 501 69 90-10 Condition: good used/working order with no leaks. Has some dings and scratches. Fits: Husqvarna 2...
husqvarna 268 chainsaw piston and cylinder set #2
Part: piston and cylinder with ring, pin, bearing, bolts, and keeper clip set Condition: good used/working shape. Came off a saw with good compression. Has a few broken fins. Fits: Husqvarna 268
husqvarna 246 chainsaw guide bar plate
Part: guide bar plate. PN 503 48 57-01 Condition: good used/working shape Fits: Some models of Husqvarna 42, 242, 246
Husqvarna 246 chainsaw crankshaft
Crank shaft crankshaft with connecting rod. part number 5034592-04 503 45 92-04 Good used shape. Connecting rod bearing in good shape, but crankshaft bearings may not be. Fits some models of Husqvarna 246 saws
(2 in stock)
Husqvarna 246 Chainsaw Oil Pump & Line
Part: oil pump with gear, line and filter Condition: good used/working shape Fits: Husqvarna 246
husqvarna 40, 45 chainsaw oil tank cap
Part: oil tank cap 503 55 16-01 Condition: good used/working shape Fits: Husqvarna 40, 45
(1 in stock)
Husqvarna 45 Chainsaw Chassis with bar studs
Engine housing crankcase chassis, gas/fuel and oil tank. 503 49 82-02 In good used shape Fits Husqvarna 40, 45, 49
(1 in stock)
husqvarna 445, 450, 450e, 445e chainsaw oiler parts
Part: oil pump oiler with hose Part #s 503 93 18-01, 503 93 21-01, 537 15 48-01, 544 08 42-01 Condition: good used/working order Fits: Husqvarna 445, 450, 445e, 450e, 435 435 e
(1 in stock)
husqvarna 51, 55 chainsaw oil pump plunger and barrel new 503 66 01-02 (H-2)
Part: oil pump gear and plunger Part # 503660102 Condition: new oem from closed out dealer Fits: Husqvarna 51, 55
(1 in stock)
Husqvarna 562 XP Chainsaw Oil Pump Assembly 505 19 99-03
Automatic oiler, oil pump assembly with line and pickup. 505 19 99-03, 505199903, 505199906, 505 19 99-06 575 84 78-01, 504 71 00-03 good used shape Fits Husqvarna 562XP 555 Autotune, Jonsered 2260 2258 Turbo
Husqvarna 550XP Chainsaw Fuel Tank Handle 522 87 42 #2
Fuel tank, rear trigger handle assembly. Includes all in photo. Good used shape. Has some staining. Fits Husqvarna 550 xp
Husqvarna 181, 281, 288 Chainsaw Flywheel fan shroud (H-57)
Part: Flywheel fan shroud / air conductor 501 80 19-02 501801902 Condition: New OEM from closed out dealer. Dusty from years of storage. Fits: Husqvarna 181, 281, 288XP
Husqvarna 181 Chainsaw intake manifold new 501 80 66-01 (H-25)
Intake manifold block 501 80 66-01 501806601 new old stock from closed out dealer Fits Husqvarna 181 SE SG
(2 in stock)
husqvarna 240, 240e, 235, 235e chainsaw clutch mechanism new 530-014949 (P-795)
Part: clutch mechanism Part # 530-014949 / 530 01 49-49 Condition: New old stock from closed out dealer Fits: Husqvarna 235, 235e, 240, 240e and some other models