homelite xl-2 chainsaw ignition coil and points kit
Part: ignition coil with points Condition: tested and in good used/working order Fits: Homelite XL 2
homelite xl-2 chainsaw oil cap
Part: oil cap Condition: good used/working shape Fits: Homelite XL 2, XL2
homelite xl-2 chainsaw oil tank 69280 new (HARD)
Part: oil tank Part number: 69280 Condition: New old stock from closed out dealer. Dusty from years of storage. Fits: Homelite XL 2, XL2
homelite xl-2 chainsaw oil tank with cap
Part: oil tank and cap 69280 Condition: good used/working shape. This is the style with the flat top cap. Fits: Homelite XL 2, XL2
homelite xl-2 chainsaw points and condenser
Part: points with condenser Condition: good used/working shape Fits: Homelite XL 2
homelite xl-2 chainsaw rear handle cover with throttle trigger kit
Part: rear handle cover with throttle lever, rod and spring, front and rear trigger Condition: good used/working order Fits: Homelite XL 2 and some other models
homelite xl-2 chainsaw throttle trigger kit
Part: throttle lever, front and rear trigger, rod and spring Condition: good used/working order Fits: Homelite XL 2
Homelite XL-2 XL2 Chainsaw Filter Retainer Mount & Screws
Part: filter retainer mount and screws Condition: good used/working shape Fits: Homelite XL-2
Homelite XL-2 XL2 Chainsaw Flywheel Key
Part: Flywheel woodruff key 69250 Condition: good used/working shape Fits: Homelite XL-2, Super 2, XL and many others.
Homelite XL-2 XL2 Chainsaw Ignition Off Switch
Part: ignition off switch Condition: good used/working shape Fits: Homelite XL-2
Homelite XL-2 XL2 Chainsaw Muffler Cover Front
Part: muffler cover Condition: good used/working shape Fits: Homelite XL-2
Homelite XL-2 XL2 Chainsaw Piston, Cylinder, Crankshaft, Crank rod
Part: piston and cylinder with the crankshaft, rod, ring Condition: good used/working shape-has good compression, is not scored-top fin has a large chip in it as visible in picture Fits: Homelite XL-2
(1 in stock)
Homelite XL-2 XL2 Chainsaw Rear Handle Engine Case Housing
Part: rear handle/housing Condition: good used/working shape-has some paint loss, scuffing, minor pitting/chipping of the metal Fits: Homelite XL-2
Homelite XL-2 XL2 Chainsaw Reed Valve Assembly
Part: reed valve Condition: good used/working shape Fits: Homelite XL-2
(1 in stock)
homelite xl-2, xl auto chainsaw valve 69428 new (hm-82)
Valve for the carburetor Part # 69428 New old stock part from closed out dealer Fits Homelite XL auto, Xl-2 models
(2 in stock)
homelite xl-400 auto chainsaw air screen pn 67987 (hm-33)
Air screen for the starter assembly Part # 67987 New old stock part from closed out dealer Fits Homelite XL 400 auto
homelite xl-400 chainsaw clutch cover
Part: drivecase clutch cover Part #58750-2 Condition: good used/working order Fits: Homelite XL 400
homelite xl-400 chainsaw decompression valve a-68358 new (hm-156)
Decompression release valve Homelite part # A68358 New old stock part from closed out dealer Fit Homelite XL 400 chainsaws
homelite xl-400 chainsaw flywheel rotor 67845 new (HM 990)
Flywheel rotor Part # 67845 New old stock part from closed out dealer Fits Homelite XL 400 automatic chainsaws
homelite xl-400 chainsaw rear trigger handle assembly
Part: rear trigger handle housing with throttle trigger, oil button, throttle link, throttle latch button Condition: good used/working order Location: Homelite XL 400
(1 in stock)
homelite xl-400 chainsaw starter bushing 67220 new (hm-72)
Starter bushing Part # 67220 New old stock part from closed out dealer Fits Homelite XL 400 chainsaws
homelite xl-400 chainsaw top handle bar
Part: top wrap handlebar (a-63909-4) with clamp (63291-a) Condition: good used/working shape Fits: homelite xl400 / xl 400
Homelite XL-400 Chainsaw Wrist Pin Bearing NEW 67408 (hm 320)
wrist pin bearing fits Homelite XL-400 and VI-123 chainsaws. Part #: 67408 New old stock from closed out dealer.
homelite xl-500 chainsaw air filter cover
Part: air filter cover, part # 58773 Condition: good used/working shape Fits: Homelite XL 500
Homelite xl-700 Chainsaw Carburetor Needle NEW 59717(hm 309)
carburetor needle fits Homelite XL-700, XL-800, 850, 870, 875, 901, 903, 904, 921, 923, XL-923FP, XL-924, XL-924W chainsaws. Part #: 59717 New old stock part from closed out dealer.
(1 in stock)
Homelite XL-700 Chainsaw Crankshaft 59625-1 NEW (HOS-E)
Crankshaft 596251 NEW Fits Homelite XL700 XL800 XL901, XL-800 and others
homelite xl-700 chainsaw cylinder with 2" bore
Part: cylinder with 2" bore Part # 63012 Condition: usable used condition Fits: Homelite XL 700 800
homelite XL-700 chainsaw outer starter spring shield 63565
Part: starter rewind shield, part # 63565 Condition: good used/working shape Fits: homelite XL-700 XL-800 XL 700 800 XL-925
(1 in stock)
homelite xl-700 chainsaw plate 63630 new (hm-40)
Plate Part # 63630 New old stock part from closed out dealer Fits Homelite XL 700 and some other models
Homelite xl-700, super XL 925 Chainsaw Air Filter Element NEW 69880 (hm 327)
Air filter element. Homelite part number: 63341, 69880, 69305 some have a rubber fitting, some have a brass fitting New old stock from closed out dealer. Fits Homelite: XL-700, XL-800, XL-900 series, Super XL 925 and others
(2 in stock)
homelite xl-700, xl-800 chainsaw handle bracket 63011-3 (hm-22)
Handle bar bracket Part # 63011 3/ 630113 Fits Homelite XL700, XL800, XL-850, xl-875, XL-870
(1 in stock)
homelite xl-700, xl-800 chainsaw muffler exhaust deflector shield
Part: deflector shield Condition: good used/working shape Fits: Homelite XL 700, XL 800
Homelite XL-76 Chainsaw Drivecase Cover Assembly
Clutch cover, with chain tensioner In good used shape Fits Homelite XL76 and others.
homelite xl-76 chainsaw guide bar plate set
Part: set of inner and outer bar plates with spring holder Condition: have some wear, in good used/working order Fits: Homelite XL 76
Homelite XL-76 Chainsaw Muffler Assembly
Muffler assembly with baffle and bolts In good used shape Fits homelite XL 76, XL-123, and others
homelite xl-76 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring and grip Condition: good used/working order Fits: Homelite XL 76
(2 in stock)
Homelite XL-800 Chainsaw Condenser NEW 63626 (hm 338)
Homelite condenser Part #: 63626 New old stock part from closed out dealer. Fits Homelite XL 700 800 XL-700 XL700 XL800 Super 2100 auto and others
Homelite xl-88 Air Deflector A-64563 new (hm 309)
Homelite air deflector filter fits Homelite XL 88 cut-off saw. Part #: A-64563, A64563, A 64563 New old stock part from closed out dealer.
(4 in stock)
Homelite xl-88 Chainsaw Muffler Baffle NEW 64126 Chainsaw (hm 309)
muffler baffle fits Homelite XL-88 chainsaw. Part #: 64126 New old stock part from closed out dealer.
homelite xl-901 chainsaw bolt 64471 new (hm-155)
Bolt for the clutch cover, part # 64471. Fits Homelite XL 901, XL-903. XL-904 chainsaws New old stock part from closed out dealer
Homelite XL-901 Chainsaw Choke Lever 65490 NEW (hm 309)
Homelite choke lever. Part #: 65490/ 65490-2, Fits Homelite XL-901, XL-903, XL-904 New old stock part from closed out dealer.
homelite xl-901 chainsaw elbow 31734 new (hm-156)
Chain oiler discharge elbow Part # 31734 New old stock part from closed out dealer Fits Homelite chainsaw models: 5-30N, 6-22, 7-21C, 7-29, 8-29, 17, 26LCS, 707G, 750, 770G, 775G, Super 650, Super Wiz 55, Super Wiz 66, Super Wiz 80, VI-123, Wiz 55, XL-901
homelite xl-901 chainsaw handle plate 65599 new (hm-154)
Handle support plate part # 65599 new old stock part from closed out dealer Fits Homelite: XL-921, XL-923, XL-924, XL-924W, XL-925, VI-955, XL-901, XL-903, XL-904
Homelite XL-901 Chainsaw Handle Spacer Plate 65598 new (hm-145)
spacer plate part # 65598 new old stock part from closed out dealer fits Homelite XL-901, XL-903, XL-904, XL-921, XL-923, XL-924, XL-924W, XL-925
homelite xl-901, xl-903, xl-904 chainsaw air filter cover and knob
Part: air filter cover and cover mounting nut Part # 63684-1 and a-63582-a Condition: good used/working shape. A few of the prongs on the backside are chipped. Fits: Homelite xl 903, 901, 904
homelite xl-902 chainsaw adjusting pin and nut
Part: bar adjuster pin and nut for the tensioner Condition: good used/working shape Fits: Homelite XL 902 / XL902
homelite xl-902 chainsaw air deflector and bracket
Part: air filter deflector with bracket Condition: good used/working shape Fits:Homelite XL 902
(1 in stock)
homelite xl-902 chainsaw air filter mount
Part: air filter mount connector elbow Part # 63019-b Condition: good used/working shape Fits: Homelite XL 902
(1 in stock)
homelite xl-902 chainsaw automatic oil pump and gear
Part: automatic oil pump oiler and worm gear Condition: good used/working shape Fits: Homelite xl 902 / xl902
(1 in stock)
homelite xl-902 chainsaw blue starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring and grip Condition: good used/working shape Fits: Homelite xl 902
(2 in stock)
homelite xl-902 chainsaw choke rod
Part: choke rod and grommet Condition: good used/working shape Fits: Homelite xl 902
homelite xl-902 chainsaw crankshaft
Part: crank shaft Condition: good used/working shape Fits: Homelite XL902 / XL 902
homelite xl-902 chainsaw ignition off switch
Part: off switch Condition: good used/working shape Fits: Homelite XL 902
homelite xl-902 chainsaw lot of assorted hardware
Part: lot of misc. hardware - screws / bolts (includes everything pictured) Condition: good used/working shape Fits: Homelite XL 902
homelite xl-902 chainsaw manual oil pump assembly
Part: manual oiler with chain oiler lever, rod. Part # 63343 /63343-1 + Condition: good used/working shape Fits: Homelite XL 902
homelite xl-902 chainsaw muffler assembly
Part: muffler with hardware Condition: good used/working shape Fits: Homelite XL 902
homelite xl-902 chainsaw oil lines and fittings
Part: fitting and oil line / hose set - includes everything pictured Condition: good used/working shape Fits: Homelite XL902 / XL 902
homelite xl-902 chainsaw piston and cylinder set
Part: piston and cylinder with rings, connecting rod Condition: Has some dings on top of the piston, in good used/working shape. Came off a saw with good compression, no breaks. Fits: Homelite XL 902
homelite xl-902 chainsaw rear trigger handle housing
Part: rear handle housing - bare bones Part # 63006-a Condition: good used/working shape Fits: Homelite XL 902
(2 in stock)
homelite xl-902 chainsaw red starter/recoil cover and pulley assembly
Part: starter housing cover with pulley and spring Condition: good used/working shape Fits: Homelite XL 902
homelite xl-902 chainsaw reed valve assembly
Part: 4 reed plates with cage and base Condition: good used/working shape Fits: Homelite XL, Super XL 902 921 925
homelite xl-902 chainsaw throttle handle cover
Part: rear trigger handle half with throttle lock Part # 63007-b Condition: good used/working shape Fits: Homelite XL902 / XL 902
(1 in stock)
Homelite xl-902 chainsaw throttle handle cover New (HM-995)
Part: rear trigger handle half Part # 63007-b Condition: New, old dealer stock Fits: Homelite XL902 / XL 902
(1 in stock)
homelite xl-902 chainsaw throttle trigger and rod
Part: throttle trigger and rod link Condition: good used/working shape Fits: Homelite XL 902 / XL902
homelite xl-902 chainsaw tillotson HS 56a carburetor
Part: tillotson HS-56a / HS56a carburetor Condition: good used physical shape. May need a carb rebuild kit Fits: Homelite XL 902
homelite xl-902 chainsaw top handle bar
Part: top handlebar Condition: good used/working shape Fits: Homelite XL 902 / XL902
(3 in stock)
homelite xl-902, xl-910 chainsaw carb main diaphragm gasket 58978 new (hm-154)
Main diaphragm carburetor gasket Part # 58978 New old stock part from closed out dealer Fits Homelite XL 902, XL 910 and some other models
(1 in stock)
homelite xl-903 chainsaw intake adapter 63019-a (hm-252)
Intake manifold adapter, part # 63019A In good used/working order Fits Homelite XL903 models
homelite xl-903 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley and rewind spring Condition: good used/working shape Fits: Homelite XL 903
homelite xl-903, xl-925 chainsaw gasket 58138 new (HM-156)
Gasket/washer Part # 58138 New old stock part from closed out dealer Fits Homelite XL-903, XL-925,1130G, 3100G, XL-901, XL-904, XL-921, XL-923, XL-923FP, XL-924, XL-924W, XP-1100, XP-1130
Homelite xl-921, xl-923, xl-924 Chainsaw Oil Outlet Check Valve NEW A-59456-A (hm 309)
Homelite oil outlet check valve fits Homelite XL 921/923/924 chainsaws Part #: A 59456 A replaces a-59456-1 New old stock part from closed out dealer.
homelite xl-921, xl-925 chainsaw handle bar bracket pn 65607
Part: handle bar bracket Part # 65607 / 65607-a Condition: good used/working shape Fits: Homelite XL 921 and XL 925
Homelite xl-923 Chainsaw Cylinder 65605 NEW (Box 995)
Part: cylinder with no opening for the decompression valve. 2-1/16" Cylinder Bore Part # 65605, A67598A, A-67598a, a 67598 a, a67598-a Condition: new old stock part Fits:Homelite XL 923 Super XL-925
homelite xl-923 chainsaw handle bar bracket pn 68766
Part: handle bar bracket Part # 68766-c / 68766 Condition: good used/woking shape Fits: Homelite XL 923 and some other models
homelite xl-923, xl-924 chainsaw piston and pin a-67989-1 new (hm-251)
piston and pin part # A679891 New old stock part from closed out dealer Fits Homelite XL 923, XL 924, XL-923FP, XL-924W
homelite xl-925 bushing 67177 new (HM-251)
Starter rope bushing Part # 67177 New old stock part from closed out dealer Fits Homelite 410, 540, 650, 750, 1050, 1130G, 2100, 2100S, 3100G, C-72, DM-40, Super 2000, Super 2100, Super 650, Super XL, VI-123, VI-944, VI-955, XL-12, XL-113, XL-114, XL-122, XL-123, XL-700, XL-800,XL-901, XL-903, XL...
homelite xl-925 chainsaw clutch / drivecase cover
Part: clutch drivecase cover Part # 67156-14 Condition: good usable used working order. Has some small hairline cracks Fits: Homelite XL 925
homelite xl-925 chainsaw clutch / drivecase cover #2
Part: clutch drivecase cover Part # 67156-14 Condition: good used/working order. Has been modified to work on XL-98 cut off saws . Will still work on XL-925 . See pictures Fits: Homelite XL 925
homelite xl-925 chainsaw fuel line 67080 new (hm-153)
Fuel line Part # 67080 New old stock part from closed out dealer Fits Homelite XL 925
homelite xl-925 chainsaw idle speed screw
Part: idle speed adjustment screw Condition: good used/working shape Fits: homelite xl 925
homelite xl-925 chainsaw ignition off switch
Part: toggle off switch, part # a-57650-3 Condition: good used/working shape Fits: homelite xl 925
Homelite XL-925 chainsaw manual oiler line New A-65682 (HM-308)
Part: Manual oiler line Part number: A-65682 A 65682 A65682 Condition: New, old dealer stock Fits: XL-901, XL-903, XL-904, XL-921, XL-923, XL-924, XL-924W, XL925
(4 in stock)
Homelite XL-925 chainsaw manual oiler line New A-65705 (HM-159)
Part: Manual oiler line Part number: A-65705 Condition: New, old dealer stock Fits: XL-901, XL-903, XL-904, XL-921, XL-923, XL-924, XL-924W, XL925
Homelite XL-925 chainsaw needle bearing set of 28 New A-69056 (HM-3189)
Needle bearing set of 28 for connecting rod Part number a69056 A 69506 New old stock from closed out dealer Fits XL925 XL 925
(3 in stock)
homelite xl-925 chainsaw pin 93517 new (hm-158)
Pin Part # 93517 New old stock part from closed out dealer Fits Homelite XL 925 chainsaws
(1 in stock)
homelite xl-925 chainsaw rear handle throttle cover
Part: rear handle cover half Condition: good used/working shape Fits: homelite xl 925
Homelite XL-925 Chainsaw Reed Valve NEW 63166-A (hm 322)
Homelite reed valve fits Homelite XL925 and XL98 chainsaws. Part #: 63166A, 63166 New old stock part from closed out dealer.
homelite xl-925 chainsaw tank gasket 67159 (HM-201)
Tank gasket Part # 67159 New old stock part from closed out dealer Fits Homelite VI-955, VI-944 XL-921, XL-923, XL-923FP, XL-924W, XL-925, XL-924
homelite xl-925 chainsaw throttle rod
Part: throttle rod link, part # 63266-a Condition: good used/working shape Fits: homelite xl-925
(2 in stock)
Homelite XL-925 Chainsaw Throttle Rod NEW 63266-A (hm 309)
throttle rod fits Homelite XL-925 chainsaws. Part #: 63266A, 63266 New old stock part from closed out dealer.
Homelite XL-925, XL-98A chainsaw muffler chrome shield New 69842 (HM-4541)
Part: Heat shield Part number: 69842 Condition: New, old dealer stock. May be dusty/have slight surface rust from years of storage Fits: XL-925, XL925, XL-98A, XL98A
homelite xl-925, xl-98a saw late model ignition coil a-96798-a new (box x)
Ignition coil module Part # A96798A New old stock part from closed out dealer Fits late model xl925 chainsaws (after lot c-246), XL98a cut off saws (after lot C-240)
homelite xl-98 chainsaw starter recoil cover only
Part: starter housing cover only Condition: good used/working shape Fits: Homelite XL 98
homelite xl-98 cut off saw air filter element 54620-b new (hm-995)
Filter element Part # 54620B / 54620 B New old stock part from closed out dealer Fits Homelite cut off saw XL98A/C/D
(1 in stock)
Homelite XL-98 Cut-off saw clutch cover 63009-a NEW (HOS-E)
Clutch and drive case cover 63009a NEW Fits Some XL98 series chop saws
homelite xl-98 multi purpose saw back plate
Part: back plate housing with loose roller bearings Part # 96728-a Condition: good used/working shape Fits: some models of Homelite XL98 / XL 98 multi purpose saws
homelite xl-98 multi purpose saw starter recoil cover and pulley assembly #1
Part: starter housing cover with pulley, rewind spring, and grip Condition: good used/working shape Fits: Homelite XL 98 saw
homelite xl-98 multi-purpose saw starter cover and pulley assembly #2
Part: starter recoil housing cover with pulley Condition: not cosmetically pretty, with stained cover and oxidation on the pulley but in working/usable order Fits: homelite xl 98 mult purpose saw
(3 in stock)
homelite xl-98 saw clutch drivecase cover
Part: clutch drivecase cover Part # 53579 Condition: some small chips, in good used/working order Fits: Homelite XL 98 multipurpose/cut off saw