Part: tillotson hs-257a recirculating carburetor with filter mount and bolts/screws Condition: good used physical shape, may need a carb rebuild kit Fits: some models of Jonsered 670 - there were a couple of slightly different hs carburetors used on this saw, so check to make sure yours...
Part: intake manifold insulator spacer wtih gasket, bolts and insulator Condition: good used/working order Fits: some models of Jonsered 670, which do not have boot type intakes
Part: lot of misc. hardware - screws, pin, bearing (includes everything pictured) Condition: good used/working shape Fits:Jonsered 670
Part: lot of misc. hardware - screws / bolts Condition: good used/working shape Fits: Jonsered 670
Part: bolts /screw set, heat shield (503 51 99-01), nuts and exhaust gasket for the muffler Condition: good used/working shape Fits: Jonsered 670
Part: Muffler heat shield 503 51 99-01 Condition: Good used/working condition Fits: Jonsered 630, 670
Muffler body. Part number 503 59 92-05 D In good used shape Fits Jonsered 670, 625
Part: Tillotson HS250A re-circulating carburetor Condition: good used physical condition. May or may not need a carb rebuild kit. Fits: Jonsered 670, 625 Jonsy used a couple of slightly different models of HS carb on these saws, so make sure yours looks like this one.
Part: tillotson HS 257a recirculating carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: some models of Jonsered 670 ( a few different carburetors were used on this saw, so check yours to make sure they match)
Top cover engine shroud Part # 501775105, 501-775105 new old stock part from closed out dealer, dusty from storage fits SOME models of Jonsered 670 chainsaws
Part: top cover engine shroud PN 503416808, 503-416808 New old stock part from closed out dealer Fits Jonsered 670 chainsaws without the “high” air filters
Part: top cover engine shroud. PN 503 41 68-08 Condition: may show signs of minor wear - chipping / minor melting on underside/ small edge cracks. In good used/working shape. Fits: Jonsered 670 chainsaws without the “high” air filters
Part: starter housing cover with pulley and spring Condition: good used/working shape Fits: Jonsereds 670 Champ
Part: starter housing cover only Condition: good used/working shape Fits: Jonsered 670
Part: starter / recoil cover with pulley and spring. 501 77 30-05 Condition: good used/working shape. Fits: Jonsered 670 Super 625 630
Heated top handle, with wiring. Fits Jonsered V series 630, 625 and 670 heated handles All intact and in good used shape, but heater element is untested.
Part: muffler Condition: good used/working order Fits: some models of Jonsered 621, 70e, 66e
Part: muffler Condition: good used/working order. Does not include screen. Fits: some models of Jonsered 621, 70e, 66e
Part: rewind spring container / holder cassette Part # 504 11 12-00 Condition: good used/working order Fits: Jonsereds 621, 70 e
Part: 3/8-8 rim sprocket drum for the clutch. Has a new rim. Includes bearing, race, washers, nut Condition: good used/working shape Fits: jonsered 70 e
Part: air filter cover and spark plug cover. Part #s 504 35 79-06 & 504 12 56-04 Condition: good used/working shape Fits: Jonsered 70 66 E 66e 70e
Part: filter cover knob/nut. PN 504 02 47-07 Condition: good used/working shape Fits: Jonsereds 70 e
Part: filter cover, pn 504 35 79-06 Condition: good used/working shape Fits: Jonsereds 70 E
Part: rim sprocket / drum Condition: good used/working shape Fits: Jonsered 70 E
Part: clutch assembly, includes clutch (504 54 05-00), drum, bearing, race washers and a new 3/8 7 tooth rim. Condition: good used/working shape. Has minor rust/oxidation Fits: Jonsered 70 E & 621
Part: handlebar bracket Part # 504 73 00-20 Condition: good used/working shape Fits: Jonsered 70 66 E 66e
Part: handlebar bracket with av buffer mounts Part # 504 73 00-20 and 504 12 50-12 Condition: good used/working shape Fits: Jonsered 70 E
Part: inner flywheel magneto and starter pawl/spring/stud set Condition: good used/working shape with no breaks Fits: Jonsered 70 e Chainsaw
Part: lot of misc. screws/ bolts, washers pictured Condition: good used/working order Fits: Jonsered 70 E
Part: outer flywheel fan 504 61 25-06 Condition: good used/working order Fits: some models of Jonsereds 70 E
Part: piston with ring, pin and bearing. Condition: usable shape. Came off a saw with good compression. Has some light dings on it. Fits: Jonsereds 70 E
Part: set of rear trigger handle cast halves with throttle trigger, safety, and throttle rod Part # 504 65 56-01, 504 65 55-01, 504 87 57-00, 504 84 59-00 Condition: good used/working shape Fits: Jonsered 70 E
Part: rear handle bottom casing, both halves. 504 65 58-07, 504 655807, 504655807, 504 65 57-07, 504655707, 504 655707 Condition: good used/working shape Fits: Jonsered 70 E, 66e 66 70e
Part: set of rear trigger handle cast halves Part # 504 65 56-01, 504 65 55-01 Condition: good used/working shape Fits: Jonsered 70 E
Part: secondary ignition module 504 39 10-05, 504 391005 Condition: good used/tested and working order Fits: Jonsereds 70 E, 66e, 66 e
Part: spark plug cover. PN 504 12 56-04. Condition: good used/working shape Fits: Jonsered 70 E
Part: starter recoil cover Condition: good used/working order Fits: Jonsereds 70 E
Part: starter pulley drum Part # 504 64 35-04 Condition: good used/working shape Fits: Jonsereds 70 e
Part: spring shield Condition: good used/working shape Fits: Jonsered 70 E
Part: switch wire Condition: new, old stock. Dusty from years of storage. Fits: Jonsereds 70 E Location: new misc. parts bin #3, box 515
Part: terminal boot for the ignition coil Part# 504 12 28-02 Condition: good used/working order Fits: Jonsereds 70 E
Part: top cover shroud. Part # 504 60 20-27 Condition: good used/working shape Fits: Jonsered 70 E
Part: top cover engine shroud Condition: good used/working shape. Has some minor breaks on front corner pictured Fits: Jonsered 70 E
Part: top front handlebar Condition: good used/working shape. Some dings in the rubber gripping Fits: Jonsered 70 E
Part: hardware - screw/bolt for the top handle Condition: good used/working shape Fits: jonsered 70 e
Fuel Line, 504 30 24 00 Condition NEW OEM, from closed out dealership Fits: Jonsereds 70e, 621
Part: inner bar plate, part # 504 59 27-00 Condition: good used/working shape Fits: Jonsered 70 e, 621, 66e, 80, 90, 820, 910, 920, 930
Part: hardware for the clutch - includes everything pictured Part # 504 23 31-00, 504 52 22-01, 504 18 44-00, 504 04 15-00 Condition: good used/working order Fits: Jonsereds 70 e and 621
Part: clutch mechanism with shoes, carrier and spring. Part number 504 54 05-00 Condition: good used/working shape. Fits: Jonsered 70 E & 621, 66E, 70 and others
Part: clutch assembly, includes the sprocket / drum, rim, bearing and mechanism (504 54 05-00) Condition: good used/working shape. Has minor rust/oxidation Fits: Jonsered 70 E & 621
Part: fuel cap Condition: good used/working shape Fits: Jonsereds 70 E, 621, 80, 49sp 52e 50 51 52 e ev
Part: av buffer mount Part # 504 12 50-12 Condition: NEW old stock part Fits: Jonsereds 70 e and 66 e
Part: av buffer mount Part # 504 12 50-12 Condition: good used/working order Fits: Jonsereds 70 e and 66 e
Part: Chainbrake mechanism part lever cam linkage Part number: 504983408 Condition: New from closed out dealer stock Fits: Jonsereds 70 e, 66 e, 521 e and 52 e
Part: throttle part catch hook Part # 504 38 67 00 Condition: new old stock from closed out dealer. Fits: Jonsered 70 e, 66 e, 80, 90
Part: throttle part Part # 504 38 67 00 Condition: good used/working shape Fits: Jonsered 70 e, 66 e, 80, 90
Part: safety interlock release lever Part # 504 84 59-00 Condition: good used/working shape Fits: Jonsered 70 e, 66 e, 90, 80
set of 2 bolts for the spike part # 725232751 new old stock part from closed out dealer fits Jonsereds 70e, 910, 920, 930, 49sp, 52, 51, 621 and some others
bucking spike and bolts part #s 5045506-00 / 725 23 27-51 New old stock part from closed out dealer Fits: Jonsered 49sp, 52, 52E, 51, 621, 66e, 70 E, 910, 920, 930, 80, 90 series and some other models
Part: throttle safety with link, spring and lever. Part #s 504 84 59-00, 504 38 67-00, 504 84 58-02 Condition: good used/working shape Fits: Jonsered 70 e and 66 e
Part: flywheel hardware - key, nut and washer Part # 504 04 24-00 and 735 11 73-50 Condition: good used/working order Fits: Jonsereds m80 and 90
Part: air filter cover and nut Condition: good used/working shape Fits: jonsered 80
Part: crank case chassis tank half. Condition: worn but usable. Starter screw holes are wallowed out. Fits: Jonsereds 80
Part: crank shaft with connecting rod and bearings. Custom made from P.P. Crank Shop. with sealed bearings. Condition: good used/working shape Fits: Jonsereds 80
Part: flywheel only, does NOT include the starter pawls Condition: good used/working shape. No broken fins Fits: Jonsered 80
Piston and cylinder with rings, wrist pin, circlips Jonsereds part # 504422100, 504-422100 new old stock part from closed out dealer Fits Jonsered 80
Part: piston pin (504 41 27-00) bearing (504 23 27-00) and seal set (504 14 70-00) Condition: good used/working shape Fits: Jonsered 80
Part: spark plug cover part # 504 12 56-00 Condition: good used/working shape Fits: Jonsereds 80
Part: starter cover with pulley, spring and grip Condition: good used/working shape Fits: Jonsereds 80 801 90
Top cover cylinder shroud Jonsereds part # 504604301/ 504-604301 New old stock part from closed out dealer Fits Jonsered 80 chainsaws
Part: air filter Part # 504 35 78-01 Condition: good used/working order with a couple small holes patched with solder Fits: Jonsereds 621, 80
Part: buffer mount. Part # 504 12 50-16 Condition: good used/working shape Fits: Jonsereds 80, 90
Part: left side of bottom casting for the rear handle Part # 504 65 58-04 Condition: good used/working order Fits: Jonsereds 80 and 90
Part: clutch bearing and race, part #s 504 23 31-00, 504 52 22-01 Condition: good used/working shape Fits: Jonsereds 80, 90
Part: intake manifold. Part # 504 80 41-01 Condition: good used/working shape Fits: Jonsered 80, 90
Intake manifold adapter block part # 504804101 / 504-804101 new old stock part from closed out dealer fits Jonsereds 80, 90
Part: left rear trigger handle cast half Part # 504 65 56-00 Condition: good used/working order Fits: Jonsereds 80, 90
Part: muffler assembly Condition: good used/working shape. Has minor denting Fits: Jonsereds 80, 90, 801
Part: pulley grip Condition: good used/working shape Fits: Jonsered 90, 80 and some other models
Part: rear trigger handle cast half, right side Part # 504 65 55-00 Condition: good used/working order Fits: Jonsereds 80 and 90
Part: throttle guide Part # 504 15 73-00 Condition: good used/working shape Fits: Jonsered 80, 90, 621
Part: top wrap handlebar Condition: good used/working order. Some of the rubber gripping is missing. Fits: Jonsereds 90, 80
Part: av buffer mount for the rear handle Part # 504 12 50 16 Condition: good used/working shape Fits: Jonsereds m80 and 90
Handle bracket Jonsered part # 504731106/ 504-731106 new old stock part from closed out dealer Fits Jonsereds 80, 90, 801
Right rear trigger handle half 503560301 superseded by 504 05-84-00 New old stock part from closed out dealer Fits Jonsereds 820, 830, 920
Part: .404" pitch x 7T spur sprocket drum for the clutch Herr Part # 263 b7 Condition: new Fits: some models of Jonsereds 820, 830, 910, 920, 920 super, 930 super
Part Name: Top Handle bar. Part # 504 73 00-43 Detailed Condition Description: good used shape, not cracked or bent. Has some dings, gouges/sections of rubber gripping missing Fits the Following Models: 920, 930, 820, 830
Part: spur sprocket drum for the clutch, 3/8x8T. Sprocket only (does not have bearing) Herr Part # 263-a8 Condition: new Fits: some models of Jonsered 820, 830, 920, 930 super
Part: brake handle support bracket, part # 505 26 92-75 Condition: good used/working shape Fits: Jonsered 920, 910, 930, 820
filler cover for the rear handle part # 501628903 / 501-628903 new old stock part from closed out dealer Fits Jonsereds 820, 920 and some other models
Starter recoil housing cover Part # 503102101 / 503-102101 Fits Jonsereds 820, 920 chainsaws
Top cover engine shroud Part # 504602047 / 504-602047 New old stock part from closed out dealer Fits Jonsereds 820, 920 chainsaw models
PART: BRAKE HANDLE BRACE, 503 17 01 01 Condition: NEW OEM, FROM CLOSED OUT DEALERSHIP FITS: JONSERED 830
Part: handle av spring mount Part # 503 53 15 01 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Jonsered 830 Location: Box A
Part: flywheel nut Part # 503 22 10 02 Condition: new old stock part. Fits: Jonsered 830 Location: box W
52mm bore cylinder and piston set In good used shape Fits Jonsereds 820 830 and others
Part: intake manifold pipe / boot Part # 504 12 08-02 Condition: good used/working shape Fits: Jonsereds 830, 930, 920
Part: intake manifold pipe / boot with connector Part # 503 08 25-01, 504 12 08-02, 504 06 00-24 Condition: good used/working shape Fits: Jonsereds 830, 930, 920