(1 in stock)
Jonsered 625 Chainsaw Crankcase Assembly 501 68 52-67 NOS (upstairs)
Crank case assembly includes: right clutch side case half, left flywheel side case half, and bearings. 501 68 52-67, 501 52 84-02 Does not include crankcase gasket New old stock from closed out dealer. There are a few chips to the paint and some maybe old oil that does not want to clean up. ...
(1 in stock)
jonsered 625 chainsaw small end rod bearing
Part: small end rod bearing Condition: good used/working shape Fits: Jonsered 625
jonsered 625 II chainsaw starter recoil cover and pulley asembly #2
Part: starter housing cover with pulley, spring and grip Condition: good used/working shape Fits: Came off a Jonsered II but will fit some other models (625/630)
jonsered 625 to 670 chainsaw fuel tank rear trigger handle #5
Part: fuel/gas tank rear trigger handle. Includes the handle cover set, safety interlock lever and throttle trigger. 501 77 27-03 Condition: good used/working shape. No leaks. Fits: Jonsereds 625, 630, 670
(1 in stock)
jonsered 625, 630 chainsaw air filter (felt)
Part: felt / flocked air filter Condition: good used/working order Fits: Jonsereds 625, 630
jonsered 625, 630 chainsaw chip guard pn 501 91 68-01 new (box C)
Part: sawdust chip guard Part # 501 91 68 01 Condition: new old stock OEM part. Dirty/dusty from years of storage. Fits: Jonsered 625, 630 Location: Box C
jonsered 625, 630 chainsaw filter mount connector
Part: filter mount connector Condition: good used/working shape Fits: Jonsered 625, 630, may also fit other models
(2 in stock)
jonsered 625, 630 chainsaw muffler assembly type 3 (non spark arrestor)
Part: muffler with bracket and bolts. Is not equipped to take a spark arrestor. Condition: good used/working shape Fits: Jonsered 625, 630
(1 in stock)
jonsered 625, 630 chainsaw muffler body half only
Part: muffler body half only Condition: good used/working shape Fits: some models of jonsered 625, 630
jonsered 625, 630 chainsaw muffler cover only for non spark arrestor
Part: muffler cover only. Is not equipped with the opening to take a spark arrestor Condition: good used/working shape Fits: Jonsered 625, 630
(2 in stock)
jonsered 625, 630 chainsaw muffler screen, plate and bolt sleeves
Part: muffler inner screen and plate with bolt sleeves Condition: good used/working shape Fits: some models of Jonsered 625, 630
jonsered 625, 630 chainsaw top cover engine shroud 504 60 20-44 new (JN-AAB)
Top cover engine shroud Part # 504602044 / 504-602044 New old stock part from closed out dealer Fits Jonsereds 625, 630
jonsered 625, 630, 670 chainsaw carburetor grommet new 503 17 98-01 (J-02)
Part: carb grommet, part # 503 17 98-01 503-179801 503179801 Condition: New from old dealer stock Fits: Jonsered 625, 630, 670
(3 in stock)
jonsered 625, 630, 670 chainsaw clutch sprocket drum #2 (with rim)
Part: clutch rim sprocket drum (used) with a new, replaceable rim Condition: good used/working shape Fits: some models of Jonsered 625, 630, 670
(4 in stock)
jonsered 625, 630, 670 chainsaw fine thread clutch mechanism
Part: clutch mechanism (shoes, spring, carrier) fine thread Condition: good used/working shape Fits: some models of Jonsered 625, 630, 670 and some Husqvarna models
(2 in stock)
jonsered 625, 630, 670 chainsaw fine thread clutch rotor
Part: fine thread clutch mechanism rotor Condition: good used/working order Fits: some models of Jonsereds 625, 630, 670
(4 in stock)
Jonsered 625, 630, 670 Chainsaw Fuel Cap (without keeper)
Part: Fuel / tank cap - late model type (newer) PN 501 27 82-01 Condition: Good used/working shape Fits: Jonsered 630, 670, 625
jonsered 625, 630, 670 chainsaw fuel tank insert cap
Part: fuel tank insert cap, part # 501 52 70-03 Condition: good used/working shape. May be Red or Black in color Fits: Jonsered 625, 630, 670
jonsered 625, 630, 670 chainsaw hand guard
Part: hand guard/ brake handle Part # 506 15 86-01 Condition: good used/working order Fits: Jonsereds 625, 630, 670
jonsered 625, 630, 670 chainsaw oil cap
Part: oil tank filler cap Condition: good used/working shape Fits: Jonsered 625, 630, 670
jonsered 625, 630, 670 chainsaw oil cap new (J-02)
Part: oil tank filler cap Condition: New old stock from closed out dealer. Fits: Jonsered 625, 630, 670
jonsered 625, 630, 670 chainsaw oil cap new type 2 501 77 41 (J-02)
Part: oil tank filler cap Condition: New old stock from closed out dealer. Fits: Jonsered 625, 630, 670
(4 in stock)
jonsered 625, 630, 670 chainsaw oil pump only
Part: oil pump oiler. Part # 501 51 25-01 Condition: good used/working shape. Fits: Jonsered 625, 630, 670
jonsered 625, 630, 670 chainsaw oil pump washer
Part: oil pump protection washer Condition: good used/working shape Fits: Jonsered 625, 630, 670
jonsered 625, 630, 670 chainsaw starter housing cover only
Part: starter/recoil cover only. Part # 501 77 31-06 Condition: Good used/working shape Fits: Jonsereds 625, 630, 670
jonsered 625, 630, 670 chainsaw starter pulley (501 52 07-01) and rewind spring set
Part: starter pulley and rewind spring Part # 501 52 04-02, 501 52 07-01 Condition: good used/working shape Fits: Jonsereds 630 up to 0160034, 625 up to 0170067 and 670 up to 0160016
jonsered 625, 630, 670 chainsaw starter recoil cover 501 77 31-06 new (JN-AAB)
Starter recoil housing cover only Part # 501773106/ 501-773106 New old stock part from closed out dealer-heavy dust from years of storage Fits Jonsereds 625, 630, 670 models
(1 in stock)
jonsered 625, 630, 670 chainsaw throttle pins and spring
Part: 2 throttle pins with spring (501 42 41-01) Condition: good used/working shape Fits: Jonsered 625, 630, 670
(3 in stock)
jonsered 625, 630, 670 chainsaw throttle safety lever 501 77 33-01 new oem (h-000)
Throttle safety lever Part # 501-773301 / 501773301 new old stock part from closed out dealer Fits Jonsereds 625, 630, 670
Jonsered 625, 630, 670 Fuel, Gas Tank Trigger Handle #1
Part: fuel tank rear trigger handle, bare bones. 501 77 27-03 Condition: good used/working shape, no breaks or leaks. Minor scuffing and fading. Fits: Jonsereds 625, 630, 670
Jonsered 625, 630, 670 Throttle Link 503-455301 New (J-02)
Part: Throttle link rod. PN 503 45 53-01 Condition: New from closed out dealer stock Fits: Jonsered 625, 630, 670
jonsered 625, 670 chainsaw air filter (felt)
Part: felt air filter Condition: good used/working shape Fits: some models of Jonsereds 625 and 670
(2 in stock)
Jonsered 630 , 490, 590 Chainsaw Brake Part 505 26 93-00 (j-02)
Brake hardware plate. 505269300 New old stock from closed out dealer. Some oxidation/dust from years of storage. Fits Jonsered models: 630, 490, 590
jonsered 630 670 chainsaw fuel tank vent
Part: tank vent Condition: good used/working shape Fits: jonsered 630, 670
jonsered 630 670 chainsaw muffler gasket
Part: muffler gasket Condition: good used/working shape Fits: Jonsered 630, 670
(2 in stock)
jonsered 630 670 chainsaw rewind spring holder
Part: rewind spring container Condition: good used/working shape Fits: Jonsered 630, 670
(4 in stock)
Jonsered 630 830 Chainsaw Space 505 26 02-20 NEW (bin T)
Part Number: 505 26 02-20Part Description: sealFits the Following Models: Jonsered 630 830 ,may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box T
(2 in stock)
jonsered 630 and husqvarna 61, 162, 266 chainsaw clutch shoe for coarse clutches (630 bin)
Part: (1) clutch shoe for coarse type clutches Condition: good used/working shape Fits: some models of Jonsered 630 and Husqvarna 61, 266, 162
jonsered 630 chainsaw 48mm piston #2
Part: 48mm piston and pin only. Does NOT include the rings. Condition: nice used/working shape Fits: some models of Jonsereds 630, which have 48mm thin ring pistons.
jonsered 630 chainsaw 48mm thin ring piston #1 *with rings*
Part: piston with "thin ring" rings. Condition: good used shape. OEM. Fits: some models of Jonsereds 630
jonsered 630 chainsaw air filter cover
Part: air filter cover Condition: good used/working shape Fits: Jonsered 630 625 series
jonsered 630 chainsaw air filter mount type 2
Part: air filter mount and bolts Condition: good used/working shape Fits: some models of Jonsered 630
jonsered 630 chainsaw air filter top half only
Part: top half only of the air filter Condition: good used/working shape ,May be flocked or nylon Fits: Jonsered 630
Jonsered 630 chainsaw carburetor Tillotson HS225A
Tillotson HS 225 A carb In good used physical shape, may or may not need new diaphram and gakset kit Fits Jonsered 630 and others
Jonsered 630 chainsaw carburetor Tillotson HS256A
Tillotson HS 256 A carb. Single fuel inlet. Built in idle adjustment. 503 28 03-14 In good used physical shape, may or may not need new diaphragm and gasket kit Fits Jonsered 630 late models and others
Jonsered 630 chainsaw carburetor Tillotson HS257A
Tillotson HS 257 A carb. Re-circulating, recirculating In good used physical shape, may or may not need new diaphram and gakset kit Fits Jonsered 630 and others
jonsered 630 chainsaw clutch cover only for chainbrake old style #3
Part: clutch sprocket guard cover 504 07 11-09 Condition: good used/working shape. Fits: Jonsered 630
(2 in stock)
jonsered 630 chainsaw crankcase half (right, clutch side)
Part: right clutch side of the crank case housing Condition: good used/working shape. Has some minor chipping. Fits: Jonsered 630
(1 in stock)
jonsered 630 chainsaw crankcase housing
Part: crank case tank housing. Condition: has a minor break on bottom edge but is in good usable shape with no leaks. Fits: Jonsered 630
(4 in stock)
jonsered 630 chainsaw crankcase housing half (left, flywheel side)
Part: crank case half- bare bones Condition: good used/working shape Fits: Jonsered 630
jonsered 630 chainsaw cylinder
Part: cylinder Condition: good used/working shape, no broken fins, came off a saw with good compression. Fits: Jonsered 630
(3 in stock)
jonsered 630 chainsaw filter mount type 1
Part: filter mount and bolts Condition: good used/working shape Fits: some models of Jonsered 630
jonsered 630 chainsaw fine thread crankshaft and rod
Part: crank shaft and connecting rod for fine thread crankshafts Condition: good used/working shape Fits: Jonsered 630
(1 in stock)
jonsered 630 chainsaw intake gasket
Part: intake gasket Condition: good used/working shape Fits: Jonsered 630
jonsered 630 chainsaw intake manifold spacer
Part: intake manfold spacer with insulator. Part # 501 51 18-03 Condition: good used/working shape Fits: jonsered 630 and some other models
jonsered 630 chainsaw intake manifold spacer 501 51 18-03 new (J-02)
Part: intake manfold spacer with insulator. Part # 501511803 Condition: new old stock Fits: jonsered 630 and some other models
Jonsered 630 chainsaw metal style brake handle arm guard used
Brake handle arm guard metal In good used shape Fits older Jonsered 625, 630 and 670 series saws
Jonsered 630 Chainsaw Muffler Body 501 65 77-03
Muffler body only. Part number 501 65 77-03 In good used shape Fits Jonsered 630 and others
Jonsered 630 chainsaw Old Style Clutch Cover only 504 59 00-21 NEW (BHSJP)
Part: clutch sprocket guard cover 504590021, 504 590021, 504 07 11-09 Condition: new old stock part Fits: Jonsered 630
jonsered 630 chainsaw old style hand guard 505 35 04-55 new (d-803)
Brake handle and arm, hand guard. Jonsereds part number 503 17 09-01, 505350455 new old stock part from closed out dealer Fits older Jonsered 625, 630 and 670 series saws
jonsered 630 chainsaw piston thin ring
Part: (1) thin ring for 48mm pistons Condition: good used/working shape Fits the Following Models: some models of Jonsereds 630
jonsered 630 chainsaw tillotson hs 218a carburetor
Part: Tillotson HS218A Condition: good used physical shape, may or may not need a carb rebuild kit Fits: some models of Jonsered 630
jonsered 630 chainsaw top cover shroud and air filter cover set
Part: top cover engine shroud with air filter cover Condition: good used/working order Fits: Jonsered 630
jonsered 630 Super II chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, spring and grip Condition: good used/working shape Fits: Came off a Jonsered II but will fit some other models (625/630)
Jonsered 630, 625 Chainsaw Flywheel Cover Shroud
Part: flywheel cover shroud 501 52 61-02 Condition: good used/working shape Fits:Jonsered 625, 630 and some models of 670
jonsered 630, 625, 670 chainsaw clutch cover with brake band, spring and mechanism (early model)
Part: clutch cover with brake band spring and brake mechanism / arm for the chainbrake Condition: good used/working order Fits: early model (older) Jonsered 625, 630, 670 models
(1 in stock)
jonsered 630, 670 chainsaw (1) trigger handle cover (snap in)
Part: (1) trigger handle cover filler, part # 503 48 45-02 Condition: good used/working shape Fits: Jonsered 630, 670
(4 in stock)
jonsered 630, 670 chainsaw bar stud
Part: bar stud Condition: good used/working shape Fits: Jonsereds 630, 670
jonsered 630, 670 chainsaw brake mechanism type 1
Part: brake mechanism Condition: good used/working shape, has rust Fits: Jonsered 630, 670
jonsered 630, 670 chainsaw brake parts lot #1
Part: parts for the chainbrake - includes the spring, knee joint and lever, bolts. Condition: good used/working shape Fits: older model (early) jonsered 630, 670 chainsaws
jonsered 630, 670 chainsaw brake parts lot #2
Part: parts for the chainbrake Condition: good used/working shape Fits: old style (early model) Jonsered 630, 670 chainsaws
jonsered 630, 670 chainsaw brake spring
Part: brake spring Condition: good used/working shape Fits: Jonsered 630, 670
(1 in stock)
jonsered 630, 670 chainsaw case bolt set
Part: set of bolts for the case Condition: good used/working shape Fits: Jonsered 630, 670
jonsered 630, 670 chainsaw clutch cover only for chainbrake #1
Part: clutch / sprocket cover only for the chain brake Condition: good used/working shape. Has some chipping. Fits: jonsered 630, 670
jonsered 630, 670 chainsaw clutch cover only for chainbrake #2
Part: clutch sprocket guard cover Condition: good used/working shape. Has a minor break on back edge and minor chipping Fits: Jonsered 630, 670
(4 in stock)
jonsered 630, 670 chainsaw cylinder head bolt set of 4
Part: set of 4 cylinder bolts Part # 503 21 60-25 Condition: good used/working shape Fits: Jonsered 630, 670 Husqvaran 268 and others
jonsered 630, 670 chainsaw fuel tank rear trigger handle #2
Part: fuel tank rear trigger handle.includes safety interlock. Does NOT include the trigger or av buffer mounts. 501 77 27-03 Condition: good used/working shape. No leaks. Fits: Jonsered 630, 670
jonsered 630, 670 chainsaw heater switch plug
Part: heater switch plug Condition: good used/working shape Fits: Jonsered 630, 670
jonsered 630, 670 chainsaw lot of assorted hardware #3
Part: lot of misc. hardware / small parts - screws, bolts, gasket, wrist pin, bearing, clips, catcher (includes everything pictured) Condition: good used/working order Fits: Jonsered 630, 670
jonsered 630, 670 chainsaw lot of assorted hardware #4
Part: lot of misc. screws and bolts for Jonsereds 630 and 670 models Condition: good used/working order
jonsered 630, 670 chainsaw molded fuel line
Part: molded fuel line hose Condition: good used/working order Fits: Jonsered 630, 670
jonsered 630, 670 chainsaw muffler bolt set
Part: set of muffler bolts / screws Condition: good used/working order Fits: Jonsered 630, 670
jonsered 630, 670 chainsaw outer bumper plate new pn 503 59 09-01 (box 514)
Part: outer bumper spike plate Condition: new. Part # 503 59 09 01 Fits: Jonsered 630, 670 Location: new misc. parts bin #2, box 514
(1 in stock)
jonsered 630, 670 chainsaw rear trigger handle cover (for heated handles type)
Part: handle cover insert for chainsaws which have heated handles Condition: good used/working shape Fits: jonsered 630, 670
jonsered 630, 670 chainsaw rear trigger handle cover set
Part: handle filler cover inserts 501 62 89-03 Condition: good used/working shape Fits: jonsered 630, 670, 625, 820, 830, 920, 930 and others.
jonsered 630, 670 chainsaw rear trigger handle cover set (for heated handles type)
Part: handle cover inserts for chainsaws which have heated handles Condition: good used/working shape Fits: jonsered 630, 670
jonsered 630, 670 chainsaw starter recoil cover and pulley assembly #2
Part: starter housing cover with pulley, spring and grip Condition: good used/working shape Fits: Jonsered 630, 670
jonsered 630, 670 chainsaw top wrap handle bar
Part: top front handlebar. PN 503 61 71-01 Condition: good used/working shape Fits the Following Models: Jonsereds 630, 670, 625
jonsered 630, husqvarna 266 ignition coil 501 51 61-02 new oem (D803)
ignition coil part # 501516102 new old stock part from closed out dealer fits some models of Husqvarna 266 and some models of Jonsereds 625, 630
Jonsered 630V Chainsaw Heater Switch 501 52 66-02 new (J-02)
Switch for the heated handles 501 52 66-02 new from closed out dealer stock Fits Jonsered 670 630 V series heated handles
jonsered 66e chainsaw choke rod
Part: choke rod Condition: good used/working shape Fits: Jonsered 66 E
jonsered 66e chainsaw clutch cover
Part: clutch sprocket cover Condition: good used/working shape Fits: Jonsereds 66 E
jonsered 66E chainsaw piston and cylinder set 504 42 00-11 (j-5)
cylinder with piston, rings, wrist pin, circlips Part # 504-420011 New old stock part, top cooling fin has a break as pictured Fits Jonsered 66 66e 66 e
jonsered 66e chainsaw spark plug cover
Part: spark plug cover Condition: good used/working shape Fits: Jonsereds 66 E
jonsered 66e chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley and spring Condition: good used/working shape Fits: Jonsered 66 E
jonsered 66e chainsaw top cover
Part: top cover engine shroud Condition: good used/working shape Fits: Jonsereds 66 E
jonsered 670 chainsaw 50mm piston kit 501 65 94-03 new oem (n-101)
50mm piston with ring, pin, circlips Part # 501659403 / 501-65 94-03 new old stock part from closed out dealer fits Jonsereds 670
jonsered 670 chainsaw air filter cover
Part: air filter cover. Part # 503 17 61-01 Condition: good used/working shape Fits: Jonsered 670
(1 in stock)
jonsered 670 chainsaw air filter mount with carb bolt set and brace
Part: filter mount with carb bolts / screws and brace part # 504 35 86-10 Condition: good used/working shape Fits: Jonsereds 670