Shindaiwa 345 Chainsaw Complete Starter Assembly
Tank housing cover and complete starter recoil rewind assembly. 72229-75000 In good used shape Fits Shindaiwa 345 and others
(2 in stock)
shindaiwa 345 chainsaw fuel/gas cap
Part: fuel cap Condition: good used/working shape Fits: Shindaiwa 345
Shindaiwa 345 Chainsaw Ignition Coil Set
Complete electronic ignition kit. Includes: pulser, exciter, and ignition coil. 22108-71500, 22108-71610, 22108-71700 Tested, in good used shape Fits Shindaiwa 345 and others
Shindaiwa 350 chainsaw Complete Clutch Assembly 3/8" LP - 6T
Complete clutch assembly includes: 3/8lp x 6 tooth sprocket drum, needle bearing, 4 shoe clutch mechanism with carrier rotor and garter spring, and clutch boss. 22102-51310, 22945-61100, 22104-51200, 22120-51210 Condition: in good used shape Fits: Shindaiwa (SDK) 305, 340, 350, 451 running 3/8 lo...
Shindaiwa 360 Chainsaw Air Filter Assembly
Fine mesh air filter 69018-98312 In good used shape Fits Shindaiwa 360, 352
(1 in stock)
Shindaiwa 360 Chainsaw Air Filter Cover
Air filter cover with knob 72299-31200 In good used shape Fits Shindaiwa 360 and others
Shindaiwa 360 Chainsaw Carb Adjust Grommet
Carburetor adjustment screw grommet. 22156-31120 In good used shape Fits Shindaiwa 360
Shindaiwa 360 Chainsaw Carburetor
Walbro WT89, WT-89 carb. 22156-81000 In good used physical shape, may or may not need fresh gaskets and diaphragms Fits Shindaiwa 360 377
Shindaiwa 360 Chainsaw Chainbrake Assembly
Complete clutch cover chain brake cover assembly with brake hand guard, band, cover and all. 72299-54102 In good used shape Fits 360 380 300s
(1 in stock)
Shindaiwa 360 Chainsaw Chainbrake Assembly new (shin bin)
Complete clutch cover chain brake cover assembly with brake hand guard, band, cover and all. 72299-54102 New old stock from closed out dealer. One small scratch from years of storage. Fits 360 380 300s
(2 in stock)
Shindaiwa 360 Chainsaw Choke Link
Choke pull linkage. 22159-82120 In good used shape Fits Shindaiwa 360
Shindaiwa 360 Chainsaw Coil
Shindaiwa 360 ignition coil. 20024-71610 Tested, in good used shape Fits Shindaiwa 360 and others
Shindaiwa 360 Chainsaw Fuel Tank Handle
Rear trigger handle, gas fuel tank assembly. 22156-33100 In good used shape. May NOT include lines. Fits Shindaiwa 360 and others
Shindaiwa 360 Chainsaw Intake Boot
Intake manifold boot. 22156-12152 In good used shape Fits Shindaiwa 360 and others
Shindaiwa 360 Chainsaw Piston and Cylinder Kit 40mm
40mm bore top end kit includes: piston, rings, wrist pin, and clips, and cylinder head. 99909-112, 99909112, 72363-98010, 7236398010, 22156-12110, 2215612110 In good used shape. fits Shindaiwa 360, 377, and others
(1 in stock)
Shindaiwa 360 Chainsaw Starter assembly
Starter cover and pulley assembly pn 22154-75101 Good Used /Usable Shindaiwa 360
(1 in stock)
Shindaiwa 360 Chainsaw Tank and Handle mounting hardware
Screws and mount caps for mounting the handles In good used shape Fits Shindaiwa 360 377
(2 in stock)
Shindaiwa 360 Chainsaw Throttle Link
Throttle linkage rod with guide. 22159-82140 In good used shape Fits Shindaiwa 360 and others
(1 in stock)
Shindaiwa 360 Chainsaw Top Cover Cylinder Shroud
Top Cylinder Cover shroud pn#22180-31110 Good Used/Usable Shidaiwa 360, 377 and similar models
(1 in stock)
Shindaiwa 360 Chainsaw Top Handle
Top front handle. 22156-32110, 2215632110 In good used shape Fits Shindaiwa 360 377
Shindaiwa 377 Chainsaw Carburetor
Walbro WT384a WT-384a WT384 carb. 72342-81000 In good used physical shape, may or may not need fresh gaskets and diaphragms Fits Shindaiwa 360 377
(1 in stock)
Shindaiwa 415 Chainsaw Starter Assembly
Starter recoil rewind cover assembly. 99900-00217, 9990000217 In good used shape Fits Shindaiwa 415 and others
Shindaiwa 416 Chainsaw Clutch Cover Chainbrake Assembly
Part: Clutch cover chainbrake assembly. Includes clutch cover, brake band, handle. 72159-54006, 7215954006 Condition: Good used/working shape. HAS BEEN REPAIRED AS PICTURED Fits: Shindaiwa 345, 500, 450, 416
shindaiwa 488 chainsaw av buffer mount
Part: av buffer mount cushion Condition: good used/working shape Fits: shindaiwa 488
(1 in stock)
Shindaiwa 488 chainsaw Bucking Spike
Part Name: Bucking Spike dawg 22160-52530 Condition: good used/working shape Fits: Shindaiwa 488
(1 in stock)
Shindaiwa 488 Chainsaw Cylinder and Piston kit
Cylinder and piston kit. Includes: Cylinder, piston, rings, wristpin, and bearing In good used shape, tested good compression Fits Shindaiwa 488 saws
(1 in stock)
Shindaiwa 488 Chainsaw Fuel tank Assembly
Fuel gas tank rear trigger handle assembly. Includes: fuel line, trigger, safety, and throttle lock. Missing vent, 22160-33103 In good used shape Fits Shindaiwa 488
(1 in stock)
Shindaiwa 500 451 Chainsaw AV Buffer Mount Set #2
Part Name: AV Mount/Buffer Set-includes everything pictured. In good used shape. Fits the Following Models: Shindaiwa 500, 451
(1 in stock)
Shindaiwa 500 451 Chainsaw AV Buffer Mount Set #3
Part Name: AV Mount/Buffer Set-includes everything pictured. In good used shape. Fits the Following Models: Shindaiwa 500, 451
Shindaiwa 500 chainsaw air filter and cover set
Part: air filter cover with knob and air filter element. 22128-97520, 22128-82400 Condition: good used/working shape Fits: Shindaiwa 500, 451, 350, 416
Shindaiwa 500 Chainsaw Clutch Cover Chainbrake Assembly
Part: CLutch cover chainbrake assembly. Includes clutch cover, brake band, handle. 72159-54006, 7215954006 Condition: Good used/working shape Fits: Shindaiwa 345, 500, 450
Shindaiwa 500 Chainsaw Complete Ignition Kit
Ignition coil, and exciter transformer module. 22128-71602, 2212871602, 22128-71620, 2212871620 Tested, in good working order Fits Shindaiwa 500 415 416
Shindaiwa 500 Chainsaw Flywheel Assembly
Flywheel rotor with pawls and springs. 72174-71100 In good used shape Fits Shindaiwa 500
Shindaiwa 500 Chainsaw Secondary Ignition Module
Exciter transformer module. 22128-71620, 2212871620 Tested, in good working order Fits Shindaiwa 500
(1 in stock)
Shindaiwa 500 Owners Instruction Manual
Owners chain saw instruction manual In good used shape Covers Shindaiwa 350 415 450 500
shindaiwa 500, 451 chainsaw choke shutter
Part: choke shutter Condition: good used/working shape Fits: shindaiwa 500, 451
Shindaiwa 500, 451 Chainsaw Oil Tank
Part Name: Oil Tank, 22140-57110 Detailed Condition Description: good used/working shape Fits the Following Models: Shindaiwa 500 451 415
Shindaiwa 575 Chainsaw Throttle Trigger Kit
Throttle trigger 22150-33321 In good used shape Fits Shindaiwa 550 575 695 and others
Shindaiwa 575, 695 Chain Guide PN 22150-52470
For Shindaiwa Chainsaws Part Name: Shindaiwa Chain Guide Part Number: 22150-52470 Fits the Following Models: 575 680 695 Detailed Condition Description: In good used shape.
Shindaiwa 695 Chainsaw Brake Handle
Chainbrake chain brake handle, hand guard. 72231-54510, 7223154510 In good used shape Fits Shindaiwa 580 575 695 680 and others
Shindaiwa 695 Chainsaw Chainbrake Assembly
Chainbrake assembly complete with band, hand guard handle and cover. 72282-54090, 7228254090 In good used shape Fits Shindaiwa 550 575 680 695 etc.
Shindaiwa 695 Chainsaw choke rod link
Part: choke button link 22150-82120 Condition: good used/working shape Fits: Shindaiwa 695, 575, 550, 680
Shindaiwa 695 Chainsaw Clutch Cover only
Clutch cover only In good used shape Fits Shindaiwa 550 575 695 680
Shindaiwa 695 Chainsaw Fuel Tank
Gas fuel tank rear trigger handle only. 22150-33101 In good used shape Fits Shindaiwa 550 575 695
Shindaiwa 695 Chainsaw Fuel Tank Vent
Fuel gas tank vent lines. 22150-33920, 22155-33990 In good used shape Fits Shindaiwa 680 695 575 and others
Shindaiwa 695 Chainsaw Ignition Complete
Complete ignition coil kit with coil, transformer/transistor, and exciter. Tested in good working order Fits Shindaiwa 550 575 695 and others
Shindaiwa 695 Chainsaw Starter cover only
Part: starter housing cover only, bare bones. 22152-75210, 2215275210 Condition: good used/working shape Fits: Shindaiwa 695, 550, 680, 575 and others
(1 in stock)
Shindaiwa 695 Chainsaw Starter cover only new 22152-75210 (shin bin)
Part: starter housing cover only, bare bones. 22152-75210, 2215275210 Condition: New old stock from closed out dealer Fits: Shindaiwa 695, 550, 680, 575 and others
(1 in stock)
shindaiwa 695 chainsaw walbro hda 29a carburetor
Part: walbro HDA-29a, HDA29a carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Shindaiwa 695, 550, 680 etc.
shindaiwa 695, 575 chainsaw fuel cap only
Part: fuel / gas tank cap with gasket part # 22155-33801 Condition: good used/working order Fits: Shindaiwa 680, 550, 575, 695
Shindaiwa 695, 575 chainsaw HD air filter assembly
Part: Heavy Duty K&N style air filter. 72230-97707 Condition: good used/working order Fits: Shindaiwa 695 and 575 580