(2 in stock)
remington PL-5, sl-11 Chainsaw rear handle support bottom
Part: rear handle support bottom-part # 64317 Condition: Good used/working shape Fits: Remington SL-11, PL-4, PL-5
(1 in stock)
remington pl-55 chainsaw bar plate set
Part: set of inner and outer guide bar plates Condition: have some wear, are in good usable condition Fits: Remington PL 55/ PL55
remington pl-55 chainsaw complete manual oil pump assembly 64994
Part: manual oiler assembly, includes pump, plunger, button, sping, lines, check valves/ fittings and oil lines Part # 64994 - 65117, 64409, 64691 + others Condition: good used/working order Fits: Remington PL 55. May also fit other models
remington pl-55 chainsaw crankcase tank housing assembly
Part: crank case tank housing Part# 65930 Condition: good used/working order Fits: Remington PL 55
remington pl-55 chainsaw crankshaft and rod kit
Part: crank shaft with connecting rod and thrust bearings Part # 61546, 65106, 65123 Condition: good used/working order Fits: Remington PL 55.
(1 in stock)
remington pl-55 chainsaw drivecase / crankcase cover assembly with bar stud set and tensioner
Part: crank case cover assembly (sprocket side) with guide bar adjusting block and screw Part# 65136, 64358, 65121, 64349, 101175a Condition: good used/working order Fits: Remington PL 55
remington pl-55 chainsaw ignition off switch
Part: ignition off switch Condition: good used/working shape Fits: Remington PL 55
remington pl-55 chainsaw muffler assembly
Part: muffler body, cover, baffle, plate, screes Part # 65122, 66269, 66270, 65110, 64649 Condition: good used/working order Fits: Remington PL 55, may also fit other models
remington pl-55 chainsaw muffler body and baffle
Part: muffler body with baffle Part # 66270, 65122 Condition: good used/working shape Fits: Remington PL55, PL 55 and some other models
remington pl-55 chainsaw rear trigger handle assembly
Part: rear handle assembly - includes rubber grip, handle cover, support, throttle trigger, thrttle link, throttle latch button and spring, idle speed screw Part # 65861, 63250, 65414, 64317, 64326, 65114, 65413 Condition: good used/working order Fits: Remington PL 55
remington pl-55 chainsaw reed plate valve assembly pn 64676
Part: reed valve plate assembly with gasket Part # 64676, includes 64648, 64642, 64578 Condition: good used/working order Fits: Remington PL 55, and some other models
(1 in stock)
remington pl-55 chainsaw screw/bolt/nut lot of assorted hardware
Part: lot of misc. hardware-bolts, screws, nuts (includes everything pictured) Condition: good used/working order Fits: Remington PL 55. May also fit other models
remington pl-55 chainsaw tillotson hs 42a carburetor with manifold and mount
Part: tillotson hs42a carburetor with intake manifold adapter, bolt set, filter mount and grommet Condition: good used physical shape. May need a carb rebuild kit Fits: Remington PL 55. May fit some other models.
(1 in stock)
remington pl-55 chainsaw top front handle bar pn 65126
Part: top wrap handle bar with grip Part # 65126 Condition: good used/working order. Grip is cracked. Fits: Remington PL 55. May also fit other models
remington pl-55, pl-5 chainsaw spike and hardware pn 65299
Part: sticker spike with screws and nuts Part # 65299 Condition: good used/working order Fits: Remington PL 55, PL 5 and other models
remington PL-6 chainsaw friction shoe pawls 60832 new (loc: RM-1)
Part: friction shoe part number 60832 Condition: new old stock. May have some slight surface rust from years of storage. Fits: Remington PL6 PL 6 SL-11A, SL11 A Bantam, PL-4 PL4 Super 754 SL-4A SL4A PL-6A PL6A PL-55 PL55 PL-55A PL55A
remington PL-6 chainsaw pisotn ring set 65295 new (loc: RM-1)
Part: piston ring set of three Condition: new old stock Fits: Remington PL6 PL 6
remington powr kraft 4.0 chainsaw clutch mechanism
Part: clutch mechanism (shoes, springs, carreier) with washer Condition: good used/working shape. light surface rust Fits: remington power kraft 4.0. Model # TMC-24085 A
remington powr-kraft 4.0 chainsaw ignition off switch
Part: on/off switch Condition: good used/working shape Fits: Remington Powr kraft 4.0. Model # TMC-24085 A
remington powr-kraft 4.0 chainsaw pulley pawl and spring set
Part: starter pulley pawl/ spring set Condition: good used/working shape Fits: Remington Powr Kraft 4.0. Model # TMC-24085 A
remington powr-kraft 4.0 chainsaw starter pulley
Part: starter pulley drum Condition: good used/working shape Fits: Remington Powr Kraft 4.0. Model # TMC-24085 A
Remington SL-11 Chainsaw Bar Adjusting Pin
Part: Bar adjusting pin Condition: Good used/working shape Fits: Remington SL-11
remington sl-11 chainsaw compression release rod
Part: compression release rod Condition: good used/working shape Fits: Remington SL11
Remington SL-11 Chainsaw Crankcase Cover and Studs
Part: Crank case cover and studs Condition: Good used/working shape Fits: Remington SL11
(2 in stock)
Remington SL-11 Chainsaw Flywheel
Part: flywheel Condition: Good used/working shape Fits: Remington SL-11
remington sl-11 chainsaw flywheel screen
Part: flywheel cover screen Condition: good used/working shape Fits: Remington SL 11
remington sl-11 chainsaw fuel/gas cap
Part: fuel cap 67642R Condition: good used/working shape Fits: Remington SL11 SL-11 SL4 SL-4 and others
(1 in stock)
Remington SL-11 Chainsaw Idle Adjusting Screw
Part: Idle adjusting screw Condition: Good used/working shape Fits: Remington SL11
(2 in stock)
remington sl-11 chainsaw inner guide bar plate
Part: inner guide bar plate and spring Condition: good used/working shape Fits: Remington SL11
(1 in stock)
Remington SL-11 Chainsaw Muffler Cover
Part: Muffler cover Condition: Good used/working shape Fits: Remington SL-11
remington sl-11 chainsaw muffler kit
Part: muffler kit, part #s 66197, 66324, 66323 + Condition: good used/working shape. Has some minor surface rust Fits: Remington SL 11, may also fit other models
(1 in stock)
remington sl-11 chainsaw oil line
Part: oil line Condition: good used/working shape Fits: Remington SL11
Remington SL-11 Chainsaw Oil line and Fittings
Part: Oil line and fittings Condition: Good used/working shape Fits: Remington SL11
Remington SL-11 Chainsaw Rear Handle Air Box
Part: rear handle air box Condition: Good used/working shape Fits: Remington SL11
Remington SL-11 Chainsaw Rear Handle Cover Half
Part: Rear handle cover half Condition: Good used/working shape Fits: Remington SL11
(1 in stock)
Remington SL-11 Chainsaw Rear Handle Grip Cover
Part: Rear handle grip cover cushion 63250 Condition: Good used/working shape Fits: Remington SL-11, PL-4, PL-5, PL4, PL5
Remington SL-11 Chainsaw Reed Valve Assembly
Part: Reed valve assembly Condition: Good used/working shape Fits: Remington SL-11 PL 4 5 PL4 PL5 SL4 SL5 and others
remington sl-11 chainsaw shut off valve link
Part: shut off valve link Condition: good used/working shape Fits: Remington SL11
remington sl-11 chainsaw throttle trigger and link
Part: throttle trigger and link Condition: good used/working shape Fits: Remington SL11 SL4 SL5 PL4 PL5 and many others.
(2 in stock)
Remington SL-11A chainsaw oil seal new 65194 (RM-1)
Crankcase oil seal part number 65194 New old stock. May be dusty/dirty from years of storage. Fits: SL-11A SL-4A PL-4 and others
(1 in stock)
Remington SL-4 Chainsaw Chain Tensioner Assembly
Chain bar adjuster tensioner assembly 101175A, 118332, 64349 In good used shape Fits Remington SL 4 5 , SL4 SL5 PL5 PL 4 5 PL4 and others
remington sl-4 chainsaw clutch cover
Part: clutch side cover Condition: good used/working shape Fits: Remington SL4/ SL 4
(2 in stock)
remington sl-4 chainsaw flywheel
Part: flywheel Condition: good used/working shape-no broken fins Fits: Remington SL4
(3 in stock)
remington sl-4 chainsaw inner bar plate
Part: inner bar plate Condition: good used/working shape-has some edge gouges Fits: Remington SL-4
remington sl-4, sl-5 chainsaw ignition off switch
Part:off switch Condition: good used/working shape Fits: Remington SL5 & SL4 /
remington sl-4, sl-5 chainsaw starter cup
Part: starter cup with nut Condition: good used/working shape Fits: Remington SL4, SL5
(2 in stock)
remington sl-4, sl-5 chainsaw starter recoil cover only
Part:starter housing cover only Condition: good used/working shape Fits: Remington 65 cc SL4 & SL5
remington sl-4, sl-5 chainsaw top front handle bar
Part: top wrap handlebar Part # 68091 Condition: good used/working order, some cracks in rubber gripping Fits: Remington SL4, SL5
remington sl-4, sl-5, sl-11 chainsaw bar nut set
Part: set of bar nuts Condition: good used/working shape Fits: Remington SL4, SL5, SL11. May also fit other models.
Remington SL-4A Chainsaw bar oil adjuster
Bar oil adjuster valve. Includes adjuster needle, valve, spring, check ball, and o-ring. 64734 In good used shape Fits SL-4A SL-5A, SL4a, SL5a and others
remington sl-9 chainsaw 1/4" pitch clutch spur sprocket drum
Part: clutch spur sprocket drum-1/4" pitch Condition: good used/working shape Fits: Remington SL9/SL 9
remington sl-9 chainsaw ai filter cover #2 *white*
Part: air filter cover and knob Condition: good used/working shape Fits: Remington SL-9
(2 in stock)
remington sl-9 chainsaw air deflector
Part: air deflector filter/bracket Condition: good used/working shape Fits: Remington SL9/SL 9
remington sl-9 chainsaw air filter
Part: air filter, pn 65071 Condition: good used/working shape Fits: Remington SL9, SL 9
remington sl-9 chainsaw air filter new 65071 (loc: RM-1)
Part: air filter, pn 65071 Condition: new old stock Fits: Remington SL9, SL 9
(1 in stock)
remington SL-9 chainsaw bucking spike 65878 (RM-1)
Part: bucking spike sticker with hardware Part number: 65878 66308 Condition: New old stock. Has some surface rust from years of storage. Fits: Remington SL9 SL-10
(3 in stock)
remington SL-9 chainsaw carburetor gasket 65062 new (loc: RM-1)
Part: carb gasket Condition: new old stock Fits: Remington SL9 SL-10 SL-10A SL10 SL10A
remington sl-9 chainsaw clutch mechanism
Part: clutch (plate, 2 shoes and spring) Condition: good used/working shape Fits: Remington SL9/SL 9
remington SL-9 chainsaw crankcase o ring 65059 new (loc: RM-1)
Part: crank case o ring Condition: new old stock Fits: Remington SL9 SL-10 SL-10A SL10 SL10A
remington sl-9 chainsaw fuel cap type 1
Part: fuel / gas cap Condition: good used/working shape Fits: Remington SL9
remington sl-9 chainsaw fuel cap type 2
Part: fuel/gas cap Condition: good used/working shape Fits: Remington SL9
remington sl-9 chainsaw green clutch cover
Part:green clutch drivecase cover Condition: Has a break on corner but is in usable shape Fits: Remington SL9
(1 in stock)
remington sl-9 chainsaw green starter recoil cover only
Part: starter housing cover only Condition: good used/working shape Fits: Remington SL9
remington sl-9 chainsaw handle cover gripping
Part: rear handle grip cover Condition: good used/working shape. Has a small ding. Fits: Remington SL9/SL 9
Remington SL-9 Chainsaw Herr starter rewind spring new (RM-1)
Herr Starter rewind spring pn# 65859 FAIRBANKS MORSE Part # 14 020 268 New old stock Remington sl 9, SL9, sl-9,Sl-10 sl-14 SL-16
remington sl-9 chainsaw manual oil pump plunger
Part: oil pump plunger Condition: good used/working shape Fits: Remington SL9/SL 9
remington sl-9 chainsaw Oil check valve
Part: Oil check valve, with new duckbill installed Condition: good used/working shape Fits: Remington SL9/SL 9
(1 in stock)
remington sl-9 chainsaw oil line #1 (exhaust)
Part: exhaust oil line and fittings Condition: good used/working shape Fits: Remington SL9/SL 9
(1 in stock)
remington sl-9 chainsaw oil line #2 (intake)
Part: intaka oil line and fittings Condition: good used/working shape Fits: Remington SL9/SL 9
remington sl-9 chainsaw oil line with filter and elbow
Part: oil line, pickup filter and elbow Condition: good used/working shape Fits: Remington SL9/ SL 9
Remington SL-9 Chainsaw red Rear Trigger Handle
Part Name: Rear Trigger Handle-handle only-does not include trigger parts Detailed Condition Description: good used/working shape Fits the Following Models: Remington SL-9
Remington SL-9 Chainsaw red Starter Recoil Cover
Part: red starter housing cover only Condition: good used/working shape Fits: Remington SL9
(1 in stock)
remington sl-9 chainsaw tank cover
Part: tank / case cover, part # 65005 Condition: good used/working shape Fits: Remington SL-9 / SL 9
remington sl-9 chainsaw throttle link
Part: throttle link rod Condition: good used/working shape Fits: Remington SL9/SL 9
remington sl-9 chainsaw throttle trigger
Part: throttle trigger Condition: good used/working shape Fits: Remington SL9/ SL 9
(2 in stock)
Remington SL-9 Chainsaw Top Front Handle type 1
Part Name: Top Handle-metal with no gripping Detailed Condition Description: good used shape, not cracked or bent Fits the Following Models: SL9
(2 in stock)
Remington SL-9 Chainsaw Trigger Handle Half
Part: Trigger handle half Condition: Good used/working shape Fits: Remington SL9
remington sl-9 chainsaw vent valve
Part: Oil vent valve Condition: good used/working shape Fits: Remington SL9/SL 9
remington SL-9 chainsaw wico points and condenser ignition
Part: ignition coil with points and condenser Condition: good used/working shape. Tested and makes strong spark. Fits: Remington SL9
Remington SL-9 SL9 Chainsaw Air Filter Cover #1 *orange*
Part: Air filter cover Condition: Good used/working shape Fits: Remington SL 9
remington sl9 chainsaw air fllter cover #3 *black*
Part: air filter cover only Condition: good used/working shape Fits: Remington SL9
Remington SL9 Chainsaw Bar Pin
Part Name: Bar adjusting pin Detailed Condition Description: good used shape Fits the Following Models: Remington SL-9
(1 in stock)
Remington SL9 Chainsaw red Crankcase Cover
Part Name: Crank case cover with bar studs Detailed Condition Description: good used shape with no breaks Fits the Following Models: Remington SL-9
(2 in stock)
remington sl9 chainsaw top wrap handle bar type 2 (with gripping)
Part: handle bar and gripping Condition: good used/working shape Fits: Remington SL-9/ SL 9
remington super 754 chainsaw air filter
Part: air filter Condition: good used/working shape Fits: Remington Super 754
(1 in stock)
Remington Super 754 Chainsaw air Filter Mount
Part: Filter mount. Pn 60009A Condition: Good used/working shape Fits: Remington Super 754
(1 in stock)
remington super 754 chainsaw bar stud
Part: bar stud/bolt Condition: good used/working shape Fits: Remington Super 754
remington super 754 chainsaw bar/chain tensioner adjuster
Part: chain tensioning nut and bar adjusting nut Condition: good used/working shape Fits: Remington Super 754
remington super 754 chainsaw bottom handle plate
Part: bottom handle plate Condition: good used/working shape Fits: Remington Super 754
(4 in stock)
remington super 754 chainsaw case bolt
Part: (1) case bolt Condition: good used/working shape Fits: Remington Super 754
remington super 754 chainsaw clutch cover
Part: clutch side cover Condition: good used/working shape. Has a minor hairline crack in round center hub area. Fits: Remington Super 754
(3 in stock)
remington super 754 chainsaw crankcase cover - fan side
Part: crank case cover, fan side Condition: good used/working shape Fits: Remington Super 754
remington super 754 chainsaw crankcase cover - sprocket side #1 (with break)
Part: crank case cover, sprocket side Condition: Has some issues: gouging of the metal and a crack in one section as pictured but is still usable Fits: Remington Super 754
remington super 754 chainsaw crankcase cover - sprocket side #2
Part: crank case cover, sprocket side Condition: good used/working shape Fits: Remington Super 754
(1 in stock)
remington super 754 chainsaw crankshaft
Part: crank shaft Condition: good used/working shape Fits: Remington Super 754
Remington Super 754 Chainsaw Flywheel Key
Part: Flywheel key Condition: good used/working condition Fits: Remington Super 754
remington super 754 chainsaw fuel line hose with screen only
Part: fuel hose line with screen Condition: good used/working shape Fits: Remington Super 754
remington super 754 chainsaw fuel line/filter and fitting set
Part: fuel line, fitting and filter Condition: good used/working shape Fits: Remington Super 754
(1 in stock)
remington super 754 chainsaw fuel tank body with reed plate and studs #1
Part: fuel tank body with reed and studs Condition: good used/working shape Fits: Remington Super 754