husqvarna 272 chainsaw 52mm cylinder head
Part: 52mm cylinder Condition: good used/working order. No breaks or scoring Fits: Husqvarna 272
(1 in stock)
husqvarna 272 chainsaw bumper plate type 1
Part: bumper plate Condition: good used/working order Fits: some models of Husqvarna 272
husqvarna 272 chainsaw carb gasket used
Part: carburetor gasket Part # 501 29 64-02 Condition: good used/working order Fits: Husqvarna 272 and some other models
husqvarna 272 chainsaw carburetor bolt 503 49 69-01 new (h-46)
Part: set carburetor bolt with sleeve Condition: new old stock from closed out dealer Fits: husqvarna 272 272xp 268xp
(1 in stock)
husqvarna 272 chainsaw carburetor bolt set
Part: set carburetor bolts / screws Condition: good used/working shape Fits: husqvarna 272 272xp 268xp
(2 in stock)
husqvarna 272 chainsaw cylinder base gasket
Part: cylinder base gasket 501 51 22-04 Condition: good used/working shape Fits: husqvarna 272 266 61 268 162 XP SE SG 272xp 266xp 268xp 266se 266sg 61 rancher practica. Jonsered 630 625 670 Series
husqvarna 272 chainsaw cylinder head bolt set of 4
Part: set of 4 cylinder bolts Condition: good used/working order Fits: Husqvarna 272
(2 in stock)
husqvarna 272 chainsaw guide bar bolt set
Part: set of guide bar bolts / studs Condition: good used/working shape Fits: Husqvarna 272
husqvarna 272 chainsaw lot of assorted hardware #1
Part: lot of misc. hardware / small parts- screws, bolts, bearings, pins (includes everything pictured) Condition: good used/working order Fits: Husqvarna 272
husqvarna 272 chainsaw lot of assorted hardware #2
Part: lot of misc. hardware - screws/bolts, and adjusting pin (includes everything pictured) Condition: good used/working order Fits: Husqvarna 272
husqvarna 272 chainsaw rubber plug (fits into the cylinder)
Part: rubber plug bushing which fits into the cylinder Condition: good used/working order Fits: Husqvarna 272, may also fit other models
husqvarna 272 chainsaw starter pulley
Part: starter pulley. PN 503 10 24-05 Condition: good used/working shape Fits: Husqvarna 272 XP, 272XP, late model 61, late model 268, 268xp.
husqvarna 272 chainsaw starter rewind spring
Part: rewind spring Condition: good used/working shape Fits: Husqvarna 272
husqvarna 272 xp and jonsered 670 chainsaw clutch shoe (670 bin)
Part: (1) clutch shoe Condition: good used/working shape Fits: Husqvarna 272 xp and some models of Jonsered 670
husqvarna 272 xp chainsaw air filter (HD west coast type)
Part: HD west coast air filter Condition: good used/working shape Fits: some models of Husqvarna 272xp
husqvarna 272 xp chainsaw clutch carrier
Part: clutch carrier rotor Condition: good used/working shape Fits: Husqvarna 272xp
husqvarna 272 xp chainsaw clutch sprocket cover only 503 57 29-01 NEW (H-1000)
Clutch chainbrake brake cover only. Husqvarna part number 503 57 29-01 New old stock part. Fits Husqvarna 272xp, 268, 61 (up to SN#4500001)
husqvarna 272 xp chainsaw clutch sprocket cover only pn 503 57 29-01 (up to 4500001)
Part: clutch cover Condition: good used/working shape. Has a minor crack on one of the back edges. Fits: some models of Husqvarna 272 xp
husqvarna 272 xp chainsaw crankcase half
Part: crankcase half, left flywheel side-casing only Condition: good used/working shape Fits: Husqvarna 272 XP
(1 in stock)
husqvarna 272 XP chainsaw cylinder gasket
Part: cylinder gasket Condition: good used/working shape Fits: Husqvarna 272 XP
husqvarna 272 xp chainsaw flywheel cover shroud
Part: flywheel cover /air conductor, part # 501 65 92-01 Condition: good used/working shape Fits: Husqvarna 272 xp and some other models Jonsered 670, 625 with the 1pc coil
husqvarna 272 xp chainsaw fuel tank rear trigger handle (early model, metal)
Part: metal fuel tank rear trigger handle, bare bones Condition: good used/working shape Fits: older model (early) husqvarna 272 xp chainsaws
husqvarna 272 xp chainsaw piston wrist pin, bearing and keepers
Part: piston wrist pin, bearing and keepers Condition: good used/working shape Fits: Husqvarna 272 XP
husqvarna 272 xp chainsaw tillotson carburetor #1 (HS254A)
Part: tillotson HS 254a carburetor Condition: good used physical shape. May need a carb rebuild kit. Fits: Husqvarna 272xp 268xp 268 xp
husqvarna 272 xp, 268 chainsaw inner air filter cover clip / spring pn 503 44 68-01 (h-007)
Part: (1) spring / clip Part Number: 503 44 68-01 Condition: new old stock OEM Fits: Husqvarna 272 xp, 268
(4 in stock)
Husqvarna 272 XP, 288 Chainsaw Piston Ring NEW 503 28 90-19 (H-0012)
Piston ring. 503289019 New part from old dealer stock Fits some models of Husqvarna 272xp, 288
husqvarna 272 xpg chainsaw rear trigger handle fuel tank assembly for heated handle
Part: rear trigger handle/fuel tank assembly with heated handle-includes (6) av mounts, throttle trigger, safety, switch, fuel cap, fuel line/filter Condition: good used/working shape with no breaks or leaks-has some paint loss Fits: Husqvarna 272 xpg
husqvarna 272 xpg chainsaw stator element for heated handles
Part: stator element for heated handles Condition: good used/working shape Fits: Husqvarna 272 XPG
husqvarna 272, 268 chainsaw inner air filter, cover, base and clips kit
Part: air filter kit - includes the air filter, filter base mount, cover and 4 clips Part # 503 44 69-01, 503 44 72-03, 503 44 68-01, 503 44 67-01 Condition: good used/working shape Fits: Husqvarna 272, 268
husqvarna 272, 268 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring. 503 61 55-71 Condition: good used/working shape Fits: Husqvarna 268, 272, 272xp, late model 61
Husqvarna 272, 268 chainsaw starter recoil cover and pulley assembly (couple broken grills)
Part: starter housing cover with pulley, rewind spring. 503 61 55-71 Condition: good used/working shape, may have a couple of the plastic grills in the cover broken, may or may not still have the old rope in it Fits: Husqvarna 268, 272, 272xp, late model 61
(1 in stock)
husqvarna 272, 268 chainsaw throttle link used
Part: throttle link Condition: good used/working shape Fits: Husqvarna 268, 272
husqvarna 272, 268, 262, 261, 394 chainsaw felt air filter new 503 44 72-03 OEM (box 515)
Part: air filter. 503447203 new part from old dealer stock Fits: Husqvarna 272, 268, 262, 261, 262xp, 272xp, 394, Late model 61, 272 XP
husqvarna 272, 268, 61, 266 chainsaw late model brake band and spring kit
Part: brake band and spring with knee joint lever and dust cover Part #s 503 70 47-01, 503 70 40-01, 503 70 99-01, 501 87 53-03 Condition: good used/working shape Fits: Husqvarna 268, 61, 272, 266
husqvarna 272xp chainsaw crankshaft (cast key type)
Part: crank shaft and connecting rod Condition: good used/working order Fits: Husqvarna 272 xp and jonsered 670 chainsaw models which have cast key flywheels and fine thread clutch mechanisms
Husqvarna 272XP chainsaw cylinder base gasket 501 51 22-04 NEW (H-14)
Part: cylinder base gasket 501 51 22-04 501512204 Condition: NEW old stock from closed out dealer Fits: husqvarna 272 266 61 268 162 XP SE SG 272xp 266xp 268xp 266se 266sg 61 rancher practica 268xp. Jonsered 630 625 670 Series
(1 in stock)
Husqvarna 272XP Chainsaw Heated Top Handle 501 53 45-04 NEW (HVB3)
Heated half wrap front top handle 501534504 NEW OEM Fits Husqvarna models that are set up for heated handles such as: 61 series (rancher, practica, standard), 266 SE XP SG, 266SE, 266SG, 268 XP, 268XP, 272 etc. 66
(2 in stock)
Husqvarna 272xp Chainsaw Piston Assembly 503 60 98-02 (Box R)
52mm Bore Piston assembly: with wrist pin, ring, and keepers. 503609802 New aftermarket part Fits Husqvarna 272 XP, and Jonsered 670 series (52mm bore)
husqvarna 272xp chainsaw top cover shroud
Part: top cover engine shroud. Part number 503 40 60-02, 503 40 60-01 Condition: in good working condition Fits: Husqvarna 272 xp
husqvarna 272xp, 268 chainsaw inner air filter, filter base and clip set
Part: inner air filter with filter base mount and set of 4 clips Part # 503 44 67-01, 503 44 68-01 Condition: good used/working order Fits: Husqvarna 268, 272 xp
(1 in stock)
husqvarna 280 chainsaw clutch sprocket assembly type 2
Part: clutch, includes the spur sprocket drum, bearing and clutch mechanism Condition: good used/working shape Fits: Husqvarna 180 280 and others
Husqvarna 280 CP Chainsaw Top Cover Shroud
Part: CP Top cover shroud Condition: Good used/working shape. Has long hairline crack Fits: Husqvarna 280 CP
Husqvarna 281 288 Chainsaw Bar Chain Adjusting Pin
Part: Bar chain adjusting pin Condition: Good used/working shape Fits: Husqvarna 281 288
Husqvarna 281 288 Chainsaw Clutch Mechanism
Part: Clutch mechanism 501 67 52-02 Condition: Good used/working shape Fits: HUsqvarna 181 281, 288 181se 281se
Husqvarna 281 288 Chainsaw Idle Needle Screw
Part: Idle speed screw Condition: Good used/working shape Fits: HUsqvarna 281 288 181 181se 288xp se xp
(1 in stock)
Husqvarna 281 288 Chainsaw Starter Pulley 503 48 48-01 NEW (H-56)
Starter rewind recoil rope pulley spool. Husqvarna part number 503 48 48-01, 503 10 24-01 New old stock OEM part Fits many Models of Husqvarna 266, 281, 288 and others. Also fits some models of Jonsered chainsaw
husqvarna 281 52mm chainsaw piston ring pn 501 91 79-01 new bin h-11
Part: piston ring, 52mm Part # 501 91 79 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 281 Location: Husky bin H-11
Husqvarna 281 Chainsaw 52mm Cylinder and wrist pin bearing new OEM part of 503 50 29-01 (upstairs)
Part: 52mm bore OEM cylinder with wrist pin bearing. Part of the complete kit part number 5035029001 Condition: new old stock from closed out dealer. Fits: Husqvarna 181, 281 SE SG
Husqvarna 281 Chainsaw 52mm Cylinder new OEM part of 503 50 29-01 (upstairs)
Part: 52mm bore OEM cylinder. Part of the complete kit part number 5035029001 Condition: new old stock from closed out dealer. Fits: Husqvarna 181, 281 SE SG
(4 in stock)
husqvarna 281 chainsaw 52mm piston kit new replaces pn 503 50 27-02 (bin 542)
Part: 52 mm piston kit - includes the ring, wrist pin and keeper clips Replaces part # 503 50 27 02 Condition: new, after-market part Fits: Husqvarna 281, 181 SE SG, 281se Location: box 542
Husqvarna 281 Chainsaw Carburetor bolt set
Carb bolt set. Husqvarna part number 503 20 21-06 In good used shape Fits Husqvarna 181 281 288 XP, XP Lite, SE, SG
Husqvarna 281 Chainsaw Carburetor bolt set 503 20 21-06 new (H-40)
Carb bolt set. Husqvarna part number 503 20 21-06 New old stock from closed out dealer Fits Husqvarna 181 281 288 XP, XP Lite, SE, SG
(1 in stock)
husqvarna 281 chainsaw crankcase housing half (left, flywheel side)
Part: crank case housing half, left flywheel side Condition: good used/working shape Fits: husqvarna 281 288 288xp
(1 in stock)
husqvarna 281 chainsaw crankcase housing half (left, flywheel side) NOS 501 80 05 (MGSFU)
Part: crank case housing half, left flywheel side Condition: New old stock from closed out dealer. Bearing turns but may need cleaning or replacing. Fits: husqvarna 281 288 288xp
husqvarna 281 chainsaw crankcase housing half (right, clutch side)
Part: right clutch side of the crank case housing half with bar stud/bolt set Condition: good used/working shape Fits: Husqvarna 281 288 281se 281xp 288xp lite xp etc.
husqvarna 281 chainsaw oil cap
Part: oil cap Condition: good used/working shape Fits: Husqvarna 281
(2 in stock)
husqvarna 281, 181 + chainsaw piston clip pn 501 29 86-01 new box H-23
Part: (1) piston clip / keeper Part Number: 501 29 86 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 281, 181, 1100 cd, 285 Location: Box H-23
husqvarna 281, 288 + chainsaw filter vent plug pn 503 60 04-01 new (box H-39)
Part: filter vent plug Part # 503 60 04 01 Condition: new old stock part. Dusty/dirty from years of sitting in storage. Fits: Husqvarna 281, 288, 3120 and some other models Location: Box H-39
husqvarna 281, 288 chainsaw 5 piece gasket set pn 501 81 34-02 new
Part: gasket kit with 5 gaskets - crankcase, muffler exhaust, cylinder base, and intake manifold Part # 501 81 34 02 Condition: new, old stock part. Dusty/dirty/may have minor oxidation from years of sitting in storage Fits: Husqvarna 281, 288, 181 SE SG XP, 181se, 181sg, 288xp lite etc.
husqvarna 281, 288 chainsaw brake band and lever
Part: brake band with lever Part # 501 87 53-01, 503 57 22-01 Condition: good used/working order Fits: Husqvarna 281, 288
husqvarna 281, 288 chainsaw chainbrake clutch cover brake handle after-market new pn 503 74 67-02 (new misc. bin1d)
Part: chainbrake assembly, includes the clutch cover, brake band, brake handle Part # 503 74 67 02 Condition: New after-market Fits: Husqvarna 281, 288, 288XP, 281XP, 288 XP Lite Location: new misc. parts bin1d
husqvarna 281, 288 chainsaw filter mount bolt pn 503 20 21-13 new box h-12
Part: filter mount bolt Part Number: 503 20 21 13 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 288, 281 Location: Box H-12
(1 in stock)
husqvarna 281, 288 chainsaw intake manifold
Part: intake manifold spacer 501 80 66 02 Condition: good used/working shape Fits: Husqvarna 288, 281
(1 in stock)
husqvarna 281, 288 chainsaw manifold insulator 501811801 new (H-2)
Part: intake manifold insulator sealing collar, part # 501 81 18-01 Condition: New OEM from closed out dealer Fits: Husqvarna 281, 288
(1 in stock)
husqvarna 281, 288 chainsaw muffler silencer bracket pn 501 81 79-01 new box h-2
Part: muffler silencer bracket Part Number: 501 81 79 01 Condition: NEW old stock from closed out dealer. Looks like it had some tape that corroded over time, and has some surface rust/oxidation. Fits: Husqvarna 181 281, 288, XP SE SG Location: H-2
husqvarna 281, 288 chainsaw oil pump new replaces pn 503 69 80-01 (box h-1)
Part: oil pump oiler Replaces Part # 503 69 81 01 Condition: new, after-market part Fits: Husqvarna 281, 288
Husqvarna 281, 288 chainsaw recoil/ rewind spring and starter pulley
Part: Recoil spring and starter pulley 503 10 24-01 Condition: Good used/ working shape Fits: Husqvarna 281, 288
husqvarna 281, 288 chainsaw rubber bellows
Part: throttle thru crankcase rubber bellows grommet. Pn 501 91 67-02 Condition: good used/working shape Fits: Husqvarna 281, 288, 288xp
Husqvarna 281, 288 XP chainsaw clutch mechanism
Part: New Style clutch mechanism Condition: Good used/ working shape Fits: Husqvarna 281, 288 XP with new style clutch mechanisms
husqvarna 281, 288, 268 chainsaw intake manifold spacer pn 501 80 66-02 new H-2
Part: intake manifold spacer, brown or white in color Part Number: 501 80 66 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 281, 288, 268 Location: Box H-2
Husqvarna 281, 288, 298 Chainsaw AV Spring Damper NEW 503 50 65-01 (bin H-0010)
Part: av spring mount vibration damper Part # 503506501 New part from old dealer stock Fits: Husqvarna 281, 288, 2101, 298
Husqvarna 281, 288, 394, 395 chainsaw chip guard pn 503 57 37-01
Part: sawdust chip guard protector Part # 503 57 37 01 Condition: used ,Good usable Fits: Husqvarna 394, 395, 288, 281 Location: 288 bin
husqvarna 281, 288, 394, 395 chainsaw chip guard pn 503 57 37-01 new (h-45)
Part: sawdust chip guard protector Part # 503 57 37 01 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 394, 395, 288, 281 Location: Box H-45
husqvarna 285 cd chainsaw handle hodler pn 501 60 94-01 new (bin H-30)
Part: handle holder support Part # 501 60 94 01 Condition: New old stock part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 285 CD Location: H-30
husqvarna 285 cd, 480 cd sleeve pn 501 55 60-02 new box h-2
Part: sleeve, 501 55 60 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 285 cd, 480 cd Location: Box H-2
husqvarna 285 chainsaw av buffer mount
Part: av buffer mount for the tank Part # 501 26 97-02 Condition: good used/working order Fits: Husqvarna 285
(3 in stock)
husqvarna 285 chainsaw chain guide used
Part: chain guide Condition: good used/working shape Fits: Husqvarna 285
(1 in stock)
Husqvarna 285 Chainsaw Choke Button Link
Part: choke Condition: good used/working shape Fits: Husqvarna 285
husqvarna 285 chainsaw clutch sprocket assembly
Part: clutch assembly - includes the rim type sprocket drum with new 3/8 8 tooth sprocket. Condition: used/working shape. Fits: Husqvarna 285 285cd 480 480cd 380 cd 380cd and others
husqvarna 285 chainsaw filter mount gasket 501 60 00-01 new (H-2)
Part: filter mount gasket Part number: 501600001 Condition: new old stock from closed out dealer. Fits: Husqvarna 285 285cd
husqvarna 285 chainsaw filter mount with hardware
Part: filter mount and hardware Condition: good used/working shape Fits: Husqvarna 285
husqvarna 285 chainsaw fuel line and filter
Part: fuel hose line with fuel filter Condition: good used/working shape Fits: Husqvarna 285
Husqvarna 285 Chainsaw Fuel Tank Trigger Handle with AV Mounts
Part: fuel tank/trigger handle with (6) av mounts, trigger, and safety-does NOT include the caps 501 56 86-01 Condition: good used/working shape with no leaks or breaks Fits: Husqvarna 285CD, 480cd and others
husqvarna 285 chainsaw handle screw pn 503 21 60-05 new box h-23
Part: handlebar screw Part Number: 503 21 60 05 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 285, may also fit other models Location: Box H-23
Husqvarna 285 Chainsaw Inner Bucking Spike type 2
Part: inner spike Condition: good used/working shape Fits: Husqvarna 285
husqvarna 285 chainsaw muffler parts
Part: muffler parts: includes the flame protector cup, plate, bracket & bolts and some hardware Condition: good used/working shape Fits: Husqvarna 285
(1 in stock)
Husqvarna 285 Chainsaw Piston Kit 501 55 92-03 NEW OEM (upstairs)
52mm diameter piston assembly kit includes: piston, rings, wrist pin Husqvarna Part Number 501 55 92-03, b cylinder New oem old stock from closed out dealer. Fits Husqvarna 285 285CD and others
husqvarna 285 chainsaw piston ring set
Part: set of piston rings Condition: good used/working shape Fits: Husqvarna 285
husqvarna 285 chainsaw pre screen filter
Part: pre screen filter Condition: good used/working shape Fits: Husqvarna 285
husqvarna 285 chainsaw rubber plug
Part: rubber plug Condition: good used/working shape Fits: Husqvarna 285
husqvarna 285 chainsaw tank vent
Part: tank vent Condition: good used/working order: Fits: Husqvarna 285
(2 in stock)
husqvarna 285 chainsaw throttle link
Part: throttle link Condition: good used/working shape Fits: Husqvarna 285
husqvarna 285, 2100, 1100 chainsaw carb choke shaft pn 501 48 37-01 new (bin H-22)
Part: carburetor choke shaft Part # 501 48 37 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 285, 2100, 1100 Location: Husky bin H-22
husqvarna 285, 2100, 2101 chainsaw mcs 4x5 chainsaw screw pn 723 12 84-01 new bin h-51
Part: screw Part # 723 12 84 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years or storage Fits: Husqvarna 285, 2101, 2100 Location: bin H-51
(1 in stock)
husqvarna 285, 2100, 2101 chainsaw screw pn 501 58 65-01 new bin h-51
Part: screw Part # 501586501 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years or storage Fits: Husqvarna 285, 298, 2100 Location: bin H-51
husqvarna 285, 2101, 2100 chainsaw crankcase gasket new 501 29 06-01 (upstairs)
Part: crank case gasket Part # 501290601 Condition: new old stock from closed out dealer. May be a little dirty/have some oil on it from years of storage. Fits: Husqvarna 2100, 2101, 285
husqvarna 285, 2101, 2100 chainsaw pre screen pn 501 61 44-01 (h-005)
Part: top cover pre screen Part # 501 61 44 01 Condition: NEW Fits: Husqvarna 285, 2100, 2101
husqvarna 285, 480, 185 chainsaw flywheel cover
Part:flywheel cover shroud / air conductor. Part # 501 40 95-01 Condition: good used/working shape Fits: came off a Husqvarna 285 but will also fit 480 & 185
husqvarna 285, 480, 2100 chainsaw throttle trigger, safety interlock lever and springs
Part: throttle trigger with safety lever, springs and pins Part #s 501 56 58-01, 501 56 78-01, 501 61 47-01, 720 12 88-50 Condition: good used/working order Fits: Husqvarna 480, 285, 2100