(2 in stock)
husqvarna 240s chainsaw Flywheel Pawl Spring 501 46 58-01 NEW (A588)
Pawl return spring. Part number 501465801 New OEM part. May have some slight surface rust from years of storage. Fits Husqvarna 240 s se sg 240se 240sg 340se 340sg 340 se sg
husqvarna 242 chainsaw brake handle bolt pivot set
Part: brake bolt/pivot set for the hand guard. Part #s 503 20 26-16, 501 76 80-01, 503 52 08-01 Condition: good used/working shape Fits: husqvarna 242
husqvarna 242 chainsaw brake spring
Part: spring for the chainbrake Condition: good used/working shape Fits: husqvarna 242
(1 in stock)
Husqvarna 242 Chainsaw Clutch Rim Drum
Part: Clutch rim drum Condition: good used/working shape Fits: Husqvarna 42 133 238 242 before serial number 3441001
(1 in stock)
husqvarna 242 chainsaw flywheel cover shroud
Part: flywheel cover 501 63 15-01 Condition: usable shape Fits: husqvarna 242
husqvarna 242 chainsaw ignition coil
Part: ignition coil Condition: good used shape-tested and works Fits: Husqvarna 242
husqvarna 242 chainsaw ignition coil module
Part: ignition module Condition: good used shape, tested and works Fits: Husqvarna 242
(2 in stock)
husqvarna 242 chainsaw nut pn 731 23 18-01 new (bin H-51)
Part: nut Part # 731 23 18 01 Condition: new old stock part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 242. May also fit other models Location: Box H-51
Husqvarna 242 Chainsaw Piston Assembly 503 51 32-71 NEW oem (upstairs)
42mm bore piston kit with ring, wrist pin, and keepers 503 51 32-71 New old stock from closed out dealer. Fits Husqvarna 242, 42 special
husqvarna 242, 254 chainsaw off switch pn 503 71 81-01 new (H-45)
Part: ignition off switch Part # 503 71 81 01 Condition: new old stock OEM part. Dirty/dusty from years of storage. Fits: some models of Husqvarna 254, 262. May also fit other models. Location: H-45
husqvarna 242, 257, 254 chainsaw screw pn 503 20 32-28 new (box H-49)
Part: top cover screw Part # 503 20 32 28, replaces 503 20 32-01 Condition: new old stock OEM part. Dusty/dirty/some surface rust from years of storage. Fits: Husqvarna 254, 257, 242 and some other models. Location: Box H-49
husqvarna 242, 42, 246 chainsaw brake cover
Part: brake cover, part # 501 79 69-02 Condition: good used/working shape Fits: husqvarna 42, 246, 242
husqvarna 242, 42, 246 chainsaw choke control pn 501 79 64 02 new (box H-39)
Part: choke control link Part # 501 79 64-02 Condition: new old stock part. Dusty/dirty from years of sitting in storage. Fits: Husqvarna 242, 42, 246 Location: Box H-39
husqvarna 242, 42, 246 chainsaw starter recoil cover only
Part: starter housing cover Part # 501 79 43-02 Condition: good used/working order Fits: Husqvarna 42, 242, 246
(4 in stock)
Husqvarna 244RX Brush Cutter muffler bolt 725 53 48-55 NEW (H-57)
muffler bolt 725534855 Superseded to 503202985 NEW from old dealer stock. Has some surface rust from years of storage. Fits some large Husqvarna brush cutters and trimmers 244R, 244RX, 250PS, 250R, 250RX, 252RX,36R
husqvarna 246 chainsaw 44mm piston kit new replaces pn 503 73 02-71 (new piston box #2)
Part: 44 mm piston kit - includes ring, keeper clips, wrist pin Replaces Part # 503 73 02 71 Condition: new, after-market Fits: Husqvarna 246
(4 in stock)
Husqvarna 246 Chainsaw Chain Slide 501 79 58-01 new oem (H-7)
Nylon chain guide slide. 501795801 new old stock from closed out dealer. Fits Husqvarna 246 242xp 242 xp 42 Special 238
(1 in stock)
Husqvarna 246 Chainsaw Flywheel & Starter Pawls
Part: flywheel and starter pawls Condition: good used/working shape with no broken fins Fits: Husqvarna 246
(1 in stock)
Husqvarna 246 Chainsaw Flywheel Cover Shroud
Part: flywheel cover 503 51 14-01 Condition: good used/working shape. May be orange or black. Fits: Husqvarna 246, 242, 42 Special
Husqvarna 246 Chainsaw Flywheel Cover Shroud 501 63 15-02 New (H-008)
Part: flywheel cover 503 63 15-02 503631502 Condition: New OEM from closed out dealer Fits: Husqvarna 246, 242, 42 Special
Husqvarna 246 Chainsaw Ignition Coil
Part: Ignition coil only Condition: good used shape-tested and works Fits: Husqvarna 246
Husqvarna 246 Chainsaw Oil Pump with Gear & Line
Part: oil pump with gear, line and filter Condition: good used/working shape Fits: Husqvarna 246
Husqvarna 246 Chainsaw Starter/Recoil Cover & Pulley Assembly
Part: starter cover with pulley, spring and pulley handle Condition: good used/working shape-has very heavy grime Fits: Husqvarna 246
husqvarna 246, 242, 42 chainsaw worm gear wheel pn 503 55 79-01 new (box H-43)
Part: oil pump worm drive gear Part # 503 55 79 01 Condition: new old stock OEM part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 42, 246, 242 &nbs...
(1 in stock)
Husqvarna 246, 42 Chainsaw Oil Cap
Part: oil cap. PN 501 62 66-02 Condition: good used/working shape. May not include keeper. Fits: Husqvarna 246, 42
Husqvarna 254 Chainsaw Chain Catcher 503 54 57-01 NEW (A588)
Plastic chain catcher. Part number 503 54 57 01 NEW Fits Husqvarna 154 254 257 261 262 262xp SE SG and others
husqvarna 254 257 261 chainsaw chip guard pn 503 70 45-01 new (bin H-0015)
Part: dust / chip guard Part # 503704501 Condition: New old stock part. May be dusty/dirty/have minor oxidation from years of storage. Fits: husqvarna 254 257 261
Husqvarna 254 257 Chainsaw Throttle Safety Lever
Part: throttle safety 501 87 77-02 Condition: good used, working shape Fits: Husqvarna 257, 254, 154 and others
husqvarna 254 chainsaw bar adjusting nut pn 501 45 27-02 new bin H-15
Part: bar adjusting nut Part # 501 45 27 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 254, may also fit other models Location: Bin H-15
husqvarna 254 chainsaw bar adjusting nut pn 501 45 41-01 new box h-12
Part: bar adjusting nut pin / pawl Part Number: 501 45 41 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 254, may also fit other models Location: Box H-12
(1 in stock)
husqvarna 254 chainsaw bar stud bolt set
Part: set of bar studs Part # 503 68 42-42 Condition: good used/working order Fits: Husqvarna 254
husqvarna 254 chainsaw brake band kit
Part: brake band with tension spring, knee joint and lever Condition: good used/working shape Fits: Husqvarna 254, may also fit other models
husqvarna 254 chainsaw brake guard hardware
Part: hardware (bolts) for the brake / hand guard - part # s 503 52 08-01, 503 76 80-01, and 503 80 27-01 + Condition: good used/working shape Fits: Husqvarna 254, may also fit other models
Husqvarna 254 Chainsaw Carb Adjust Grommet 501 86 24-01 new (H-58)
Carburetor adjustment screw grommet guide. 501862401 new old stock Fits Husqvarna 254 154 and others
husqvarna 254 chainsaw exhaust spacer gasket
Part: muffler exhaust spacer gasket (metal and thicker than regular gasket Condition: good used/working order Fits: Husqvarna 254
(1 in stock)
Husqvarna 254 Chainsaw Flywheel w/Starter Pawls
Part: flywheel and starter pawls 503 08 80-01 Condition: good used/working shape with no broken fins Fits: SOME models of Husqvarna 254 SE XP 254XP 262 257 Please look closely at the photos to make sure you are getting the right one for your saw.
husqvarna 254 chainsaw fuel tank rear trigger handle
Part: fuel tank rear trigger handle housing, bare bones Condition: good used/working shape with no leaks. Has some scuffing/dings Fits: husqvarna 254, 257
(3 in stock)
Husqvarna 254 Chainsaw Ignition Switch cable 501 63 44-03 new oem (H-7)
Part: Ignition switch cable wire Part number: 501634403 Condition: new old stock from closed out dealer Fits: Husqvarna 254 261 262
(1 in stock)
husqvarna 254 chainsaw intake gasket
Part: intake gasket, part # 503 54 44-01 Condition: good used/working shape Fits: husqvarna 254
husqvarna 254 chainsaw lot of assorted hardware
Part: lot of misc. hardware - screws, nuts (includes everything pictured) Condition: good used/working shape Fits: husqvarna 254
husqvarna 254 chainsaw muffler shield 503 74 85-01 new (h-57)
Part: muffler shield plate baffle 503748501 Condition: new from closed out dealer stock Fits: Husqvarna 254
husqvarna 254 chainsaw muffler shield and gasket
Part: muffler shield plate and exhaust gasket Condition: good used/working order Fits: Husqvarna 254
husqvarna 254 chainsaw oil pump with metal gear
Part: oil pump oiler with worm drive gear Part # 503 16 73-01, 501 86 69-01 Condition: good used/working order Fits: Husqvarna 254
(1 in stock)
Husqvarna 254 Chainsaw Rubber AV Buffer Mount 501 86 03-01 NEW (H-12)
Rubber AV buffer mount. 501 86 03-01 NEW old stock from closed out dealer. Fits Husqvarna 154 254 257
husqvarna 254 chainsaw rubber bushing
Part: bushing Condition: good used/working order Fits: Husqvarna 254
husqvarna 254 chainsaw top cover bolt set of 3
Part: set of 3 top cover bolts / screws Part # 503 20 32-28 Condition: good used/working order Fits: Husqvarna 254, 262, 257, 261
husqvarna 254, 154 chainsaw muffler bracket
Part: muffler bracket holder, part # 503 08 12-01 Condition: good used/working shape Fits: Husqvarna 254, 154
husqvarna 254, 154 chainsaw muffler bracket new 503 08 12-01 (H-57)
Part: muffler bracket holder, part # 503081201 Condition: New from old dealer stock. Has some surface rust/dust from years of storage Fits: Husqvarna 254, 154 and others
(2 in stock)
Husqvarna 254, 154 Chainsaw Top Cylinder Cover/Shroud 501 86 95 new OEM (HAB1)
Part: top cover 501 86 95-08 5018696 Condition: New old stock from closed out dealer. Fits: Husqvarna 254
(1 in stock)
Husqvarna 254, 154 Chainsaw Top Cylinder Cover/Shroud 501 86 95 type 2 new OEM (MGSFU)
Part: top cover 501 86 95-08 5018696 Condition: New old stock from closed out dealer. Dirty and a little scuffed from years of storage. Fits: Husqvarna 254
husqvarna 254, 154, 262 chainsaw seal retainer with screws
Part: seal retainer with o ring and screws Part # 501 87 24-01, 740 48 27-02, 501 49 76-01 Condition: good used/working order Fits: Husqvarna 154, 254, 262
husqvarna 254, 257 + chainsaw clutch spring pn 501 45 61-01 new (bin h-11)
Part: clutch spring Part # 501 45 61 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 254, 257, 444, 50, 51, 55, 55 rancher Location: Husky bin H-11
husqvarna 254, 257 + chainsaw trigger handle filler pn 503 40 47-01 new (box H-41)
Part: (1) rear trigger handle filler cover Part # 503 40 47 01 Condition: new old stock part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 51, 55, 261, 254, 257, 261, 262XP Location: Box H-41
husqvarna 254, 257 chainsaw 4 piece gasket kit new pn 501 87 96-04 (hva 1001 bin)
Part: gasket set, includes the crankcase, cylinder base, and intake manifold gaskets Part # 501 87 96 04 Condition: new Fits: Husqvarna 254, 257 Location: HVA bulky 1001 bin
husqvarna 254, 257 chainsaw oil pump only
Part: oil pump oiler only Part # 503 16 66-01 Condition: good used/working order Fits: Husqvarna 254
(1 in stock)
husqvarna 254, 257 chainsaw throttle control link and guide
Part: throttle link and guide. PN 501 87 68-03 Condition: good used/working shape Fits: Husqvarna 254, 257
husqvarna 254, 257 chainsaw throttle control link and guide NEW (H-58) 501 87 68-03
Part: throttle link and guide. PN 501 87 68-03 Condition: New old stock OEM part Fits: Husqvarna 254, 257
(4 in stock)
husqvarna 254, 257 chainsaw throttle safety catch pn 501 87 77-02 new (box H-49)
Part: throttle safety lever catch Part # 501 87 77 02 Condition: new old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 254, 257 Location: Box H-49
(4 in stock)
husqvarna 254, 257 chainsaw throttle trigger
Part: throttle trigger Condition: good used/working shape Fits: Husqvarna 254, 257, 50, 51, 55
husqvarna 254, 257 chainsaw worm drive gear pn 503 64 29-01 new bin h-50
Part: oil worm drive gear / wheel Part # 503 64 29 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 254, 257 Location: Bin H-50
(1 in stock)
husqvarna 254, 257 xp chainsaw inner bucking spike pn 501 79 50-01
Part: spike. PN 501 79 50-01 Condition: good used/working shape Fits: Husqvarna 254, 257
husqvarna 254, 257, 154 chainsaw handle brace
Part: top handle brace , part # 501 86 72-02 Condition: good used/working shape may be black or orange Fits: husqvarna 254, 257, 154
(1 in stock)
husqvarna 254, 257, 154 chainsaw handle spacer new oem 501 86 72-02 (H-18)
Part: top handle brace , part # 501867202 Condition: new old stock from closed out dealer. Fits: husqvarna 254, 257, 154
(1 in stock)
husqvarna 254, 257, 261, 262 chainsaw choke control
Part: choke control, part # 501 86 90-02 Condition: good used/working shape may be black or gray and vary cosmetically. Fits: husqvarna 254, 257, 262, 261, 262xp, 254xp
husqvarna 254, 257, 261, 262 chainsaw starter rewind spring new H-008)
Part: starter rewind recoil spring Part # 501 63 02-03 501630203 Condition: New OEM from old dealer stock. May be dusty from storage Fits: Husqvarna 254, 257, 261, 262
(2 in stock)
Husqvarna 254, 257, 262, 261 Chainsaw Brake Dust Cover
Part Name: brake cover in used/working shape 501 87 50-01 Fits the Following Models: 254, 257, 261, 262, 262xp
husqvarna 254, 257, 262, 261 chainsaw starter pawl kit
Part: starter pawl kit for the flywheel. Includes (2) pawls, spring, studs Condition: good used/working shape Fits: husqvarna 254, 257, 262, 261
husqvarna 254, 257, 51, 55 chainsaw throttle trigger lever pn 503 09 79-04 new (box H-46)
throttle trigger lever Part # 503097904/ 503-097904 new old stock OEM part. May have some small scuffs/be dusty/dirty from years of storage. Fits: Husqvarna 51, 55, 254, 257 Location: box H-46
(4 in stock)
husqvarna 254, 266, 268, 42, 262 chainsaw brake lock spring (254 bin)
Part: lock spring. PN 503 49 34-01 goes inside of brake handle Condition: good used/working shape Fits: Husqvarna 254, may also fit other models
Husqvarna 257 chainsaw clutch side case half
Crankcase half. Right, clutch side. One side of 501 86 00-04 In good used shape Fits Husqvarna 257, 262, 262xp, and 261
(1 in stock)
Husqvarna 257 - 262xp Chainsaw Starter Cover Only 503 54 17-01 NEW (HAB-1)
Starter recoil rewind cover only. 503541701 NEW from old dealer stock Fits Husqvarna 254xp 257 261 262xp
(4 in stock)
husqvarna 257 chainsaw carb bolt set
Part: set of carburetor bolts. Part # 503 49 69-03 Condition: good used/working shape Fits: Husqvarna 257
(1 in stock)
husqvarna 257 chainsaw felt air filter
Part: felt air filter 501 87 97-04 Condition: good used/ usable shape Fits: Husqvarna 257, 254
(1 in stock)
Husqvarna 257 chainsaw flywheel side case half
Crankcase half. Left, flyweel side. One side of 501 86 00-04 In good used shape Fits Husqvarna 257, 262, 262xp, and 261
Husqvarna 257 chainsaw lot of assorted hardware
Part: set of bolts screws and misc for 257. Includes all in picture. Condition: good used/working shape Fits: husqvarna 257
husqvarna 257 chainsaw muffler assembly
Part: muffler with support bracket plate and bolts. Equipped for spark arrestor but does not include the screen. Part # 503 50 79-05, 503 50 86-02, 725 53 87-55 Condition: good used/working shape Fits: Husqvarna 257
Husqvarna 257 chainsaw muffler body only
Muffler body only. Husqvarna part number 503 97 25-01 D In good used shape, some denting Fits 257 and others
(1 in stock)
husqvarna 257 chainsaw starter recoil cover and pulley assembly #2
Part: starter housing cover with pulley, rewind spring and grip Part # 503 54 17-01, 503 17 89-02, 501 63 02-02 Condition: good used/working shape Fits: Husqvarna 257, 254XP and others
husqvarna 257 chainsaw top cover shroud
Part: top cover engine shroud Condition: good used/working shape. Fits: Husqvarna 257
(1 in stock)
husqvarna 257 xp chainsaw brake bolt
Part: brake bolt Condition: good used/working shape Fits: Husqvarna 257 XP
husqvarna 257 xp chainsaw cylinder
Part: 48mm mahle cylinder Condition: good used/working shape. Came off a saw with good compression. Good bore. Fits: Husqvarna 257
husqvarna 257 xp chainsaw cylinder gasket
Part: cylinder gasket Condition: good used/working shape Fits: Husqvarna 257 XP
husqvarna 257 xp chainsaw flywheel and starter pawls
Part: flywheel and starter pawls 503 52 94-01 Condition: good used/working shape with no broken fins Fits: Husqvarna 257 XP
husqvarna 257 xp chainsaw rim drum clutch assembly
Part: clutch-includes the drum, rim, bearing, mechanism, 503 55 80 01 Condition: good used/working shape Fits: Husqvarna 257 XP
husqvarna 257 xp chainsaw starter cover with pulley and spring #1
Part: starter cover with pulley and spring Part # 503 54 17-01, 503 17 89-02, 501 63 02-02 Condition: good used/working shape Fits: Husqvarna 257 254
husqvarna 257, 154, 254 + chainsaw oil pump o ring pn 740 48 27-02 new bin h-50
Part: Oil pump O ring Part # 740 48 27 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 154, 254, 257, 261 262xp may also fit other models Location: Bin H-50
(1 in stock)
husqvarna 257, 154, 262 chainsaw fuel hose line pn 501 76 83-02 new box H-23
Part: fuel hose line, Part # 501 76 83 02, 581 75 61-03 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 257, 154, 262, 261, 262xp Location: Box H-23
husqvarna 257, 254 chainsaw throttle trigger spring pn 503 08 46-01
Part: throttle spring Part # 503 08 46 01 Condition: in good used shape Fits: Husqvarna 238, 257, 242, 254, 257, 154
husqvarna 257, 254, 261, 262 chainsaw starter spring washer pn 503 54 45-01 new (box H-43)
Part: starter rewind spring holder / washer shield Part # 503 54 45 01 Condition: new old stock OEM part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 254, 257, 261, 262 Lo...
husqvarna 257, 261 chainsaw outer bucking spike
Part: outer bucking spike Part # 503 52 39-01 Condition: good used/working order Fits: Husqvarna 257 262xp 254 254xp and 261
husqvarna 257, 261, 262 chainsaw hand guard brake handle
Part: hand guard brake handle Condition: good used/working shape. Fits: Husqvarna 262, 261, 157
(3 in stock)
husqvarna 257, 261, 262 chainsaw herr 3/8-7 spur sprocket drum new pn n267-a7
Part: 3/8" pitch x 7T spur sprocket drum and bearing for the clutch Herr Part # n267 A7 Condition: new Fits: some models of Husqvarna 257 (after serial no. 314.0001) 261, 262 (after serial no. 345.0001)
husqvarna 257, 262 chainsaw brake band and spring kit with hardware
Part: brake band, tension spring, knee joint lever, bolt set, spring Part # 503 51 21-01, 501 87 54-01, 507 76 81-01, 501 76 80-01, 501 87 53-01, 501 87 53-01 Condition: good used/working shape Fits: Husqvarna 257, 262
husqvarna 257, 262, 261 chainsaw muffler bolt set
Part: set of muffler bolts Part # 725 53 87-55 Condition: good used/working order Fits: Husqvarna 257, 262, 261
(2 in stock)
husqvarna 26 rlc, 32 rlc, 32 rc air filter pn 952 70 85-15 new (new misc. parts bin)
Part: (1) air filter Part # 952-708515 Condition: new Fits: Husqvarna 26rlc, 27rlc, 32rc
Husqvarna 261 262 XP Chainsaw Throttle Trigger
Part Name: throttle trigger Part Description: good used shape-no breaks Fits the Following Models: Husqvarna 261 262 XP This is a used part.
Husqvarna 261 262 XP Chainsaw Throttle Trigger with spring and pin
Part Name: throttle trigger, spring and pin Part Description: good used shape-no breaks Fits the Following Models: Husqvarna 261 262 XP This is a used part.
Husqvarna 261 chainsaw top front handle
Husqvarna 261 Top/front handle good used working condition fits husqvarna 261 chainsaw
husqvarna 261 xp chainsaw top cover shroud
Part: top cover engine shroud Condition: in good used shape Fits: Husqvarna 261 xp