Husqvarna 262 XP Chainsaw Muffler
Muffler exhaust with bracket. 503 55 55-04, 503 50 86-02 In good used shape Fits Husqvarna 261 262xp 257
Husqvarna 262 XP Chainsaw Muffler Body Only
Muffler exhaust 503 55 55-04 In good used shape Fits Husqvarna 261 262xp 257
Husqvarna 262XP + Allen Bolt 725 53 29-55
Short bolt allen bolt M5x16 M5 x 16mm. 725 53 29-55, 725 53 29-55, 9036 341 1010, 9036 341 0980 In good used shape Fits loads of Husqvarna Stihl Dolmar and Jonsered chainsaws
Husqvarna 262xp Chainsaw 48mm Mahle Cylinder
48mm bore Mahle A cylinder In good used shape Fits Husqvarna 261, 262 XP
Husqvarna 262xp Chainsaw 48mm Mahle Piston and Cylinder Set
48mm bore Mahle A cylinder and piston. Top end motor kit includes: cylinder head, piston, ring, wrist pin, keeper clips, and rod bearing. In good used shape Fits Husqvarna 261, 262 XP
Husqvarna 262xp Chainsaw 48mm Mahle Piston and Cylinder Set Type 2
48mm bore Mahle A cylinder and piston. Top end motor kit includes: cylinder head, piston, ring, wrist pin, and keeper clips. Does not have place for decompression valve In good used shape Fits Husqvarna 261, 262 XP
Husqvarna 262xp Chainsaw Brake band kit
Chain brake brake band 503704401 In good used shape Fits Husqvarna 261 262 XP
(1 in stock)
Husqvarna 262xp chainsaw case bolts
Part: set of 6 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 262 xp 257
Husqvarna 262xp Chainsaw Fuel Tank Assembly
Fuel tank assembly with trigger parts, and handle fillers. 503 49 74-01 In good used shape, no leaks. Fits Husqvarna 261, 262 XP
Husqvarna 262XP Chainsaw Hardware and Small Parts Kit
Hardware and small parts kit includes everything pictured. Nuts, bolts, screws, small parts. In good used shape Fits Husqvarna 262 XP and some parts can be used on others
husqvarna 262xp chainsaw oil pump gear
Oil pump worm gear for 7/8 clutch drum splines. Part # 503 55 78 01 In good used shape Fits Husqvarna 261 262 xp
Husqvarna 262xp Chainsaw Outer Bar Plate
Outside bar guide plate. 503 63 10-02 In good used shape Fits 254 257 261 262 xp
husqvarna 262xp chainsaw plastic clutch cover only
Part: clutch cover guard 501 87 41 Condition: good used/working order Fits: Husqvarna 262 xp, 261, 257, 254, 154
Husqvarna 262xp Chainsaw Tool Compartment Door
Door cover for small tool compartment in the rear tank trigger handle In good used shape Fits Husqvarna 262 xp
Husqvarna 262xp Chainsaw Top Cover Air Baffle
Top cover winter/summer air baffle plug insert 503 52 61-01 In good used shape Fits Husqvarna 261 262 xp
Husqvarna 262xp Chainsaw Top Cover Only #2
Top cover engine shroud 503 54 22-01 Is a little ugly , some melting from muffler but usable shape Fits Husqvarna 261 262 XP
Husqvarna 266 Chainsaw Bar Plate Set
Large style bar plates, set of inner and outer 501 44 42-01, 501 44 44-01 In good used shape Fits Husqvarna 61 266 162 SE SG and many others
husqvarna 266 chainsaw carb bolt set
Part: set of carburetor bolts 503 49 69-02 Condition: good used/working shape. May NOT include the sleeves. Fits: Husqvarna 266XP 266SE 266 SE SG XP
husqvarna 266 chainsaw carb sleeve
Part: carburetor sleeve/grommet 501 28 92-01 Condition: good used/working shape Fits: Husqvarna 266, 266xp, 61 Rancher, 162, 266se, 61 practica, 66, 266 XP SE SG
Husqvarna 266 Chainsaw Dust Protection Washer 501 83 17-01
Clutch and oil pump dust protection washer cover. Husqvarna part number 501 83 17-01 good used shape Fits Husqvarna 61, 61 Rancher, 162, 266se, 266sg, 266 se sg xp, 266xp, 268, 272, 272xp, 66. Jonsered 630 625 670 series
husqvarna 266 chainsaw fine thread clutch carrier rotor
Part: clutch spider / carrier Condition: good used/working shape Fits: Husqvarna 266xp, 266 xp
husqvarna 266 chainsaw fuel line hose
Part: fuel hose line Condition: good used/working shape Fits: husqvarna 266 xp se sg 266se 266xp 61 rancher practica classic
husqvarna 266 chainsaw handle cover filler set (for metal tanks) #2
Part: set of screw on handle filler covers for the rear handle. Includes all in picture Condition: good used/working order: Fits: 266 models which have metal tanks
husqvarna 266 chainsaw hs224b chainsaw tillotson carburetor
Part: tillotson HS 224b carburetor Condition: good used physical shape, may or may not need a carb rebuild kit Fits: Husqvarna 266 266xp 266sg 266se se sg xp
(1 in stock)
husqvarna 266 chainsaw wrist pin, bearing and keepers set
Part: wrist pin, bearing and keepers for the piston Condition: good used/working shape Fits: Husqvarna 266
(1 in stock)
husqvarna 266 se chainsaw muffler type 1
Part: muffler assembly-Part # 501 65 77-03 Condition: good used/working shape-has some minor rust and denting Fits: some models of Husqvarna 266se
Husqvarna 266 SE chainsaw top cover #2
Top cover. Husqvarna part number 501 68 60-01, 501 68 61 In good, solid used shape, but faded and scuffed with a crack. See photos. Fits Husqvarna 266 se sg xp, 266XP, 266SE, 266SG, 66, Older model 61, 61 Rancher, 61 Practica, 268xp, 268 xp. Older saws only with air filters that are held...
Husqvarna 266 Tube Type Chainsaw Muffler
Muffler with exhaust tube 501 65 76-01 In good used shape Fits Husqvarna 266 SE SG
(2 in stock)
Husqvarna 266 XP chainsaw cylinder and piston kit
Piston and cylinder top end kit. 50mm bore Mahle. Cylinder, piston with ring, wrist pin, bearing, keepers. 501 68 55-71 In good used shape. Fits Husqvarna 266, 66, 266 SE SG XP, 266SE, 266XP
(1 in stock)
Husqvarna 266 XP chainsaw cylinder and piston kit #2
Complete piston and cylinder top end kit. 50mm bore Mahle. Cylinder, piston with ring, wrist pin, bearing, keepers. 501 68 55-71 In good used shape. A few broken fins. Fits Husqvarna 266, 66, 266 SE SG XP, 266SE, 266XP
Husqvarna 266 XP chainsaw cylinder and piston kit (w/ new piston)
Complete piston and cylinder top end kit. 50mm bore Mahle with new high quality aftermarket piston and ring. Cylinder, piston with ring, wrist pin, bearing, keepers. 501 68 55-71 In good used shape. Good compression, no scoring. Good threads in spark plug hole and muffler mounting holes. ...
husqvarna 266 xp chainsaw muffler assembly kit 503 59 03-01
Part: muffler with bolts, nuts, bracket and gasket Part # 503 59 03-01 Condition: good used/working order Fits: Husqvarna 266xp
(3 in stock)
Husqvarna 266, 268, 272 Chainsaw Gas Fuel Cap with keeper
Part: fuel cap with keeper, keepers differ in cosmetic design. 501 43 14-02 Condition: good used, working shape Fits Models: Husqvarna 266, 268, 272, 266xp, 266se, 61, 268xp 44
Husqvarna 266, 268, 61, 272 Rim Drum Clutch Assembly (fine thread) includes new replacement rim
Part Name: husqvarna 266, 268, 61, 272, 266xp, 272xp, 268xp Rim drum clutch assembly. 501 77 85-02, 501 83 15-02. Part Description: fine thread rim clutch assembly, including the clutch mechanism (shoes, spring, carrier rotor) the sprocket drum and a new replacement rim Detailed Condition Descrip...
Husqvarna 266, 272 chainsaw chainbrake assembly USED
Part: chain brake assembly, includes the clutch cover, brake handle, band Part # 503 73 66 01 Condition: good used shape. Small chip missing. Fits: Husqvarna 61, 266, 268, 272xp, XP SE SG
husqvarna 266, 272, 268 chainsaw bumper plate
Part: bumper plate Part # 503 44 57-01 Condition: good used/working shape Fits: husqvarna 266, 272, 268, 162se, 162sg, 162 se sg, 61 Practica Rancher, 266xp, 266se, 272xp, 268xp, 266 se sg xp. Jonsered 625 630 670 series.
husqvarna 266, 61 + chainsaw oil pump only
Part: oil pump oiler only. Part # 501 51 25-01 Condition: good used/working shape Fits: Husqvarna 266, 61, 268, 272, 272xp, 268xp, 266xp, 266se, 162se, 61 Rancher Practica. Jonsered 625 630 670 Series.
(1 in stock)
husqvarna 266, 61 chainsaw fuel tank rear trigger handle (bare bones)
Part: fuel tank rear trigger handle housing only 501 61 91-10 Condition: good used/working order Fits: Husqvarna 266 and some 61 models (models which take wider fuel line)
husqvarna 266, 61 chainsaw muffler bolt set and gasket
Part: muffler bolt / screw set and gasket Condition: good used/working shape Fits: Husqvarna 61, 266
husqvarna 266, 61 chainsaw orange flywheel cover conductor
Part: orange flywheel cover shroud / air conductor 501 52 61-02 501 52 61-01 Condition: good used/working shape Fits: some models of Husqvarna 61, 266se, 266sg, 266xp, 162, 162se, 266 se sg xp
husqvarna 266, 61 chainsaw starter recoil cover and pulley assembly #6
Part: starter housing cover with pulley, rewind spring Condition: good used/working shape. Has some dings and stains Fits: Husqvarna 266 sp sg xp, 61 rancher practica, 266se, 266sg, 266xp,
husqvarna 266, 61 chainsaw starter recoil cover only #2
Part: Starter/recoil cover only 503 61 56-01 Condition: usable-has some grill breaks Fits: Husqvarna 266 se sg xp, 61 rancher practica, 266se, 266sg, 266xp, 268xp 268 xp old style, 66
husqvarna 266, 61, 268, 272 chainsaw starter pawl
Part: (1) starter pawl for the flywheel. PN 501 67 32-01 Condition: good used/working shape Fits: husqvarna 266, 61, 268, 272, 266xp, 268xp, 272xp
husqvarna 266, 61, 268, 272 chainsaw starter pawl spring
Part: pawl spring for the flywheel. 501 67 35-01 Condition: good used/working shape Fits: husqvarna 266, 61, 268, 272, 272xp, 266xp, 61 Rancher Practica, 266 SE SG XP and many others.
(2 in stock)
husqvarna 266, 61, 268, 272 chainsaw starter pawl, stud, and spring kit
Part: starter pawls, studs and springs for the flywheel Condition: good used/working shape Fits: husqvarna 61, 266, 268, 272
Husqvarna 266se chainsaw case bolts
Part: set of 7 bolts / screws for the case Condition: good used/working shape Fits: husqvarna 266 se
Husqvarna 266SE Chainsaw Exhaust Deflector
Muffler exhaust deflector for older was equipped with tubular metal brake handles. 501 81 72-01 In good used shape Fits Husqvarna 266SE 266SG 266 SE SG 61 Rancher Practica, 162se, 162sg, 162. Jonsered 630.
(1 in stock)
husqvarna 266se chainsaw left, flywheel side crankcase half #2
Part: crank case half (left, flywheel side) Condition: good used/working shape. Has a chip, and still functional. See photos. Fits: Husqvarna 266 se
Husqvarna 266XP Chainsaw Full Wrap Top Handle
Full wrap around west coast top handle bud. 501 69 95-01 In good used shape Fits Husqvarna 162se 162 se, 61 Practica Rancher, 266se 266xp 266 se xp.
Husqvarna 266xp Chainsaw Inner Bar Plate 501 44 44-01
Inside inner guide bar plate 501 44 44-01, 501444401 good used shape Fits Husqvarna 61 Rancher Practica, 66, 162se, 162sg, 162 se sg, 266 se xp, 266se, 266xp, 268, 268xp, 272xp, 272, 181se, 181, 281xp, 281, 288, 288xp, 163, 163se, 180cd, 280cd, 380cd, 480cd, 180 280 380 480 285 1100 2100 cd, ...
husqvarna 266xp chainsaw intake manifold with insulator, gaskets and bolts
Part: intake manifold spacer with gaskets, insulator and bolts / screws Part # 504 68 64-01, 503 49 24-01, 501 51 19-02, 501 29 64-03, Condition: good used/working order Fits: Husqvarna 266 xp
husqvarna 266xp chainsaw left, flywheel side crankcase half
Part: crank case half (left, flywheel side) 501 68 53 Condition: good used/working shape. Has some minor chipping. Fits: Husqvarna 266 xp
Husqvarna 266xp Chainsaw Oil Pump Worm Gear Washer
Washer that goes behind the plastic oil pump worm drive gear. 503 23 00-13 In good used shape Fits Jonsered Jonsereds 630 625 670 series Super Champ Etc. Husqvarna 61 rancher practica, 162se, 162 se sg, 66, 266se, 266xp, 266 xp, 268xp, 268, 272xp, 272.
Husqvarna 268 Chainsaw Carb HS234b
Tillotson HS234 B carburetor In good physical condition. May or may not need fresh gasket and diaphram Fits Husqvarna 268
(1 in stock)
husqvarna 268 chainsaw crankshaft (cast key type)
Part: crank shaft and connecting rod Condition: good used/working order Fits: Husqvarna 268 chainsaw models which have cast key flywheels and fine thread clutch mechanisms
(4 in stock)
Husqvarna 268 Chainsaw Late Style Clutch Mechanism 503 74 44-02 NEW (misc 1D)
3 shoe, 3 c-spring clutch mechanism. 503 74 44-02 New AFTERMARKET part Can be used as a replacement on Husqvarna: 66, 266, 268, 272xp, 272. Jonsered 670 625 series
(2 in stock)
husqvarna 268, 272 chainsaw intake manifold collar 501 65 90 used
Part: intake manifold sealing collar Part Number: 5016590 Condition: good used, working shape Fits: Husqvarna 268, 272 XP, 268xp, 272xp
husqvarna 268, 272 xp chainsaw filter mount (non west coast type)
Part: filter mount holder 503 44 65 71 Condition: good used/working shape Fits: husqvarna 268, 272xp
Husqvarna 268, 272xp chainsaw fuel tank rear trigger handle Complete
Part: Complete fuel tank rear trigger handle housing includes: gas tank handle, 6 rubber av buffer mounts, throttle trigger, trigger safety interlock, throttle return spring, and vent. 501 69 90-10 Condition: good used/working order with no leaks Fits: Husqvarna 268, 272 xp and some late model ...
Husqvarna 268, 272xp chainsaw fuel tank rear trigger handle Complete #2
Part: Complete fuel tank rear trigger handle housing includes: gas tank handle, 6 rubber av buffer mounts, throttle trigger, trigger safety interlock, throttle return spring, and vent. 501 69 90-10 Condition: good used/working order with no leaks. Has some dings and scratches. Fits: Husqvarna 2...
husqvarna 268, 272xp chainsaw top cover cylinder shroud 503 40 60-01
Part: top cover cylinder shroud Replaces Part # 503 40 60 01 Condition: good used shape Fits: Husqvarna 268 61 268xp and some models of 272 xp
husqvarna 268, late model 61 chainsaw top cover
Part: top cover engine shroud 503 61 00-03 Condition: good used/working order. Fits: Husqvarna 268 and some models (late) of 61
husqvarna 268, late model 61 chainsaw top cover #1
Part: top cover engine shroud 503 61 00-03 Condition: good used/working order. small scuffs, very slight muffler melt that does not affect appearance. good color, no fade, and nice "300 badge" Fits: Husqvarna 268 and some models (late) of 61
husqvarna 272 and jonsered 670 chainsaw ignition coil with lead wire (272 bin)
Part: ignition coil 503 62 02-02 Condition: good used/working shape. Tested and makes strong spark. Fits: Husqvarna 272xp, 272 268 xp and Jonsered 670 625 with later 1 piece coil.
husqvarna 272 chainsaw 52mm piston (with ring)
Part: 52mm OEM piston with ring, wrist pin, and bearing. 503 60 98-02 Condition: good used/working order Fits: Husqvarna 272xp 272 xp xpg
husqvarna 272 chainsaw 52mm piston and cylinder set #2
Part: 52mm bore piston and cylinder with ring, wrist pin, bearing and keeper clip set 503 60 96-71 Condition: good used/working shape. Came off a saw with good compression, no breaks. Piston is in really great shape. Fits: Husqvarna 272xp, 272 XP
(1 in stock)
husqvarna 272 chainsaw carburetor grommet
Part: carb adjustment grommet 503 44 51-01 Condition: good used/working shape Fits: husqvarna 272, 272xp, 268, Late model 61, 268xp
husqvarna 272 chainsaw muffler heat shield
Part: muffler exhaust heat shield. Part # 503 51 99-01 Condition: good used/working shape Fits: husqvarna 272, 272xp, 268, 268xp, 61 Late model. Jonsered 670 625 Late model
husqvarna 272 chainsaw top handle bar
Part: top handlebar 501 53 45-03 Condition: good used working order Fits: Husqvarna 272, 268, 61, 272xp, 268xp
(3 in stock)
husqvarna 272 xp and jonsered 670 chainsaw clutch mechanism (670 bin)
Part: clutch mechanism (shoes, spring and carrier) 503 52 79-01 Condition: good used/working shape Fits: Husqvarna 272xp and some models of Jonsered 670
(3 in stock)
Husqvarna 272 XP Chainsaw inner Air Filter (nylon type)
Part: air filter-orange or black in color 503 44 72-01Part Description: good useable shape with no tearsFits the Following Models: Husqvarna 272XP, 261, 262xp, 262 xp, 394xp, 394 xp
husqvarna 272 xp, 268, 61 chainsaw ignition off switch Late model
Part: ignition off switch. Part # 503 71 79-01 Condition: good used/working shape Fits: late model (newer) Husqvarna 61, 268, 272, 266, 272xp, 254 254xp 257 261 262xp 262 xp
(1 in stock)
husqvarna 272, 268, 61, 266 chainsaw late model brake band kit #2
Part: brake band with knee joint lever and dust cover Part #s 503 70 47-01, 503 70 40-01,501 87 53-03 Condition: good used/working shape Fits: Husqvarna 268, 61, 272, 266 se
Husqvarna 272xp and Jonsered 670 chainsaw clutch spring (670 bin)
Part: (1) clutch spring. Condition: good used/working shape Fits: Husqvarna 272 xp and some models of Jonsered 670
Husqvarna 272xp Chainsaw Air Tube
Intake air tube In good used shape Fits Husqvarna 272 XP
Husqvarna 272xp Chainsaw Crankcase Assembly
Crank case with crankshaft, and both case halves. Crankshaft for woodruff key type flywheels. Case for 1pc ignition coil systems. 501 77 99-01, 501 52 84-02 In good used shape, may or may not need new seals. Fits Husqvarna 61, 268, 272 xp SN# 107001 - 3481259
husqvarna 272xp chainsaw decompression valve
Part: decomp valve Part # 503 71 53-01 Condition: good used/working shape Fits: Husqvarna 268 272 288 xp 272xp 288xp
Husqvarna 272xp Chainsaw Flywheel side Case Half
Crank case half, left flywheel side. For saws with 1pc ignition coil. In good used shape Fits Husqvarna 61, 268, 272 xp SN# 107001+
husqvarna 272xp chainsaw muffler kit pn 503 59 92-05 with shield, bracket
Part: muffler with shield, bracket and screws Part # 503 59 92-05 Condition: good used/working order Fits: Husqvarna 272 xp, late model 61, late model 268 268xp, Jonsered 670, Jonsered 625 series
Husqvarna 272xp Chainsaw Pleated Paper Air filter
Air filter for very fine particles, pleated paper type element OEM 503 06 40 In good used shape Fits Husqvarna 272 262 394 xp and others
Husqvarna 272xp chainsaw starter cover only
Starter recoil rewind housing cover only. 503 61 55 71 In good usable condition Fits: Husqvarna 268, 272xp, 272 xp Late model 61
(1 in stock)
husqvarna 272xp chainsaw tillotson carburetor #2 (HS 260A)
Part: Tillotson HS260A carburetor 503 28 03-16 Condition: good used physical shape. May need a carb rebuild kit. Fits: Husqvarna 272 xp 268
husqvarna 272xp, 268 chainsaw filter mount and carb bolts (west coast type)
Part: HD filter mount holder with carb bolt /screw set. 503 53 55-01 Condition: good used/working order Fits: some models (which are west coast style) of Husqvarna 268 and 272 xp
Husqvarna 280CD Chainsaw Flywheel Shroud
Flywheel shroud baffler 501 27 54-01 In good used shape Fits Husqvarna 280 CD and others
Husqvarna 280CD Chainsaw Rear Trigger Handle Assembly
Rear trigger handle assembly with handle halves and trigger parts. In good used shape Fits Husqvarna 280 CD S 280s 280cd 185cd 185
Husqvarna 280s Chainsaw Starter Assembly
Starter recoil rewind cover assembly includes: pulley, spring, cover etc. 501 44 01-01, 501 20 10-02, 501 20 13-01, 501 27 83-01 In good used shape Fits Husqvarna 280s 280cd 280 s cd
Husqvarna 281 288 Chainsaw Starter Recoil Cover w/ Pulley
Part: Starter Recoil Cover w/ Pulley 501 81 00-06 Condition: Good used/working shape. Fits: Husqvarna 181, 281, 288 SE SG XP, 181SE, 288xp Lite
Husqvarna 281 288 Chainsaw Starter Recoil Cover w/ Pulley #2
Part: Starter Recoil Cover w/ Pulley 501 81 00-06 Condition: Good used/working shape. A bit grungy and starter sleeve shows wear. Fits: Husqvarna 181, 281, 288 SE SG XP, 181SE, 288xp Lite
Husqvarna 281 Chainsaw Flywheel Assembly w/ pawls
Flywheel with starter pawls complete 501 80 22-01 In good used shape Fits 181 281 288 SE, 181se, 281se, 288xp, 288 lite
Husqvarna 281 Chainsaw Flywheel Assembly w/ pawls #2
Flywheel with starter pawls complete 501 80 22-01 In good used shape. One fin broken Fits 181 281 288 SE, 181se, 281se, 288xp, 288 lite
(1 in stock)
Husqvarna 281 Chainsaw Gas/Fuel Cap
Fuel Cap 501 81 96-02 In good used shape, no breaks/leaks Fits Husqvarna 281 288 XP Lite 288xp Chainsaws
(1 in stock)
Husqvarna 281 Chainsaw Muffler Cover
Muffler cover front plate In good used shape Fits 281, 181
Husqvarna 281 Chainsaw Piston and Cylinder 52mm Gilardoni
52mm bore OEM, non-deco, piston and cylinder set complete. Includes cylinder, piston, ring and wrist pin. Husqvarna part number: 503 50 29-01 In good used shape, makes good compression. Fits Husqvarna 181, 281xp, 281 xp lite etc. without a compression release
Husqvarna 281 XP chainsaw top cover
Top cylinder cover 501 80 59-01 In good used shape Fits 281, 181 SE XP
husqvarna 281, 288 chainsaw ignition coil set #2
Part: ignition coil set - includes primary coil and secondary ignition module. 501 81 27-02, 501 81 28-01 Condition: good used/working shape. Tested and makes strong spark. Fits: Husqvarna 181, 281, 288, 288xp, 281xp, 288 281 XP Lite etc.
husqvarna 281, 288 chainsaw manifold insulator
Part: intake manifold insulator, part # 501 81 18-01 Condition: good used/working shape Fits: Husqvarna 281, 288
Husqvarna 281, 288, 181 Chainsaw Oil Pump Oiler with Line & Gear
Part: oil pump with oil line/filter and gear Condition: good used/working shape Fits: Husqvarna 281, 288, 181
Husqvarna 281xp Chainsaw Cylinder Only Salvage
Scored but cleanup and runable cylinder head. KS OE Supplier. Fits Husqvarna 181 281 281XP. 52mm Bore.
husqvarna 285 cd chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, spring and grip. 501 40 18-02 Condition: good used/working shape Fits: Husqvarna 285cd, 285 CD