(3 in stock)
husqvarna 61 chainsaw crankshaft and connecting rod (coarse thread type)
Part: coarse thread crank shaft and rod most likely will not include bearings or nut. Condition: good used/working order Fits: some models of Husqvarna 61, 266, 266se and 162
husqvarna 61 chainsaw crankshaft and rod (fine thread type)
Part: fine thread crank shaft with connecting rod Condition: good used/working shape Fits: Husqvarna 61, Later model 266 XP, 266, 66, and 268
Husqvarna 61 Chainsaw Cylinder Plug
Part: Cylinder Plug Condition: Good used/working shape Fits: Husqvarna 61
husqvarna 61 chainsaw early model tillotson hs 260a carburetor with mount, bolts, manifold kit
Part: carb kit -includes tillotson HS260a carburetor with filter mount, intake manifold, screws, gaskets Condition: good used physical shape, may need a carb rebuild kit Fits: early model (older) Husqvarna 61 models
Husqvarna 61 Chainsaw Filter Mount w/ Carb Bolts
Part: Filter mount w/ carb bolts Condition: Good used/working shape Fits: Husqvarna 61
Husqvarna 61 Chainsaw Fuel/Gas Cap #2 (NON vented)
Part: nonvent fuel cap Condition: good used/working shape-cap only-no keeper Fits: Husqvarna 61, 266, 268, 272 SE XP SG
husqvarna 61 chainsaw intake manifold spacer
Part: intake manifold Condition: good used/working shape Fits: Husqvarna 61
(1 in stock)
husqvarna 61 chainsaw intake spacer pn 501 53 38-03 /501 53 38-01 new (box H-41)
Part: intake manifold spacer Part # 501 53 38 01 / 501 53 38 03 Condition: new old stock part. Dusty/dirty from years of sitting in storage Fits: Husqvarna 61 Location: Box H-41
Husqvarna 61 Chainsaw late model 48mm piston 503 53 90-02 (box H-17)
Piston for later model Husqvarna 61 Saws 503 53 90-02 New Aftermarket part Husqvarna 61 and others
husqvarna 61 chainsaw lot of assorted hardware #3
Part: lot of misc. hardware/ small parts - includes a muffler bolt, muffler exhaust gasket, carb bolt set, piston pin, bearing, keeper clip set, washer plate Condition: good used/working shape Fits: Husqvarna 61
(4 in stock)
Husqvarna 61 Chainsaw Muffler only for spark arrestor
Part: muffler only equipped with opening for spark arrestor Condition: good used/working shape. Minor denting. Fits: some models of Husqvarna 61
husqvarna 61 chainsaw muffler with bracket and gasket (non spark arrestor type)
Part: non spark arrestor type muffler with bracket and exhaust gasket Condition: good used/working order Fits: Husqvarna 61, 162
husqvarna 61 chainsaw muffler with bracket, bolts, and gasket (non spark arrestor type)
Part: non spark arrestor type muffler with bracket, muffler bolts, nuts, and exhaust gasket (bolts and nuts not pictured but included) Condition: good used/working order Fits: Husqvarna 61, 162
Husqvarna 61 Chainsaw Piston Assembly 48mm 503 51 74-01 (Box R)
48mm Bore Piston assembly: with wrist pin, ring, and keepers. 503517401 New aftermarket part Fits Husqvarna 61 series
husqvarna 61 chainsaw piston kit
Part: piston kit - includes ring, bearing, pin, keeper clip set Condition: good used/working shape Fits: Husqvarna 61
husqvarna 61 chainsaw seal retainer plate used
Part: seal retainer plate Part # 501 52 82-01 Condition: good used/working shape Fits: Husqvarna 61
husqvarna 61 chainsaw small lot of assorted hardware #1
Part: small lot of misc. hardware - screws Condition: good used/working shape Fits: Husqvarna 61
husqvarna 61 chainsaw starter recoil cover and pulley assembly #7
Part: starter housing cover with pulley and rewind spring Condition: good used/working shape. May not have decal Fits: came off a Husqvarna 61, will also fit 266
husqvarna 61 chainsaw starter recoil cover and pulley assembly #9
Part: starter housing cover with pulley, grip, and rewind spring Condition: good used/working shape. Fits: came off a Husqvarna 61, will also fit 266
(4 in stock)
husqvarna 61 chainsaw switch wire
Part: switch wire Fits: Husqvarna 61
husqvarna 61 chainsaw top handle bolts set of 4
Part: bolt set of 4 for the top handle Condition: good used/working order Fits: Husqvarna 61
(1 in stock)
husqvarna 61 early model chainsaw carburetor gasket pn 501 25 09-01 new bin h-50
Part: gasket Part # 501250901 superseded to 501250902 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Early models of Husqvarna 61 Location: Bin H-50
husqvarna 61 rancher chainsaw top cover shroud
Part: top cover engine shroud Condition: good used/working condition, minor crack/melting Fits: Husqvarna 61 practica and 61 rancher
husqvarna 61 rancher chainsaw top cover
Part: top cover engine shroud Condition: good used/working order. Has some a minor melted/burned section of plastic. Fits: Husqvarna 61 Rancher
husqvarna 61 to 272 series & Jonsered 625-670 chainsaw oil seal new pn 503 26 02-04 (h-14)
Part: oil seal. Husqvarna Part # 503 26 02 04, 296 52 59-16 Condition: new old stock from closed out dealer. Fits: Husqvarna 61, 162, 266, 268, 272 272xp 268xp 266xp 480 480cd & Jonsered 625, 630, 670
husqvarna 61, 162 chainsaw brake band early/older model
Part: brake band Condition: good used/working shape Fits: some (early/older) model of Husqvarna 61, 162, 266se, 266xp
husqvarna 61, 162 chainsaw brake bolt
Part: brake bolt/screw. Part # 501 61 17-01 Condition: good used/working shape Fits: some models of Husqvarna 61, 162 and some models of early (older) 266
(3 in stock)
husqvarna 61, 162 chainsaw brake pivot bolt set #2 early model
Part: brake bolt / pivot set. 501 82 44-01, 501 82 43-01 Condition: good used/working shape Fits: early model (older) Husqvarna 61, 162, 266 chainsaws which have metal clutch covers
husqvarna 61, 162 chainsaw brake spring set and lever (early model)
Part: brake springs and lever for the chainbrake. Part #s 501 82 47-01, 501 48 09-01, 501 82 32-01 Condition: good used/working shape Fits: some older (early) models of husqvarna 61
husqvarna 61, 162 chainsaw metal chain catcher stop
Part: chain catcher stop and screw Part # 501 53 11-01 Condition: good used/working order Fits: older (early) model Husqvarna 61 and 162, 266, 268, 272
husqvarna 61, 162 chainsaw old style brake band kit
Part: brake band kit, includes the band, large and small spring, lever, bolt, bushing set Part #s 501 82 47-01, 501 82 32-01, 501 61 17-01, 501 48 09-01 + Condition: good used/working shape Fits: some models, older (early) models of Husqvarna 61 and 162
husqvarna 61, 162 chainsaw old style metal clutch cover non-chainbrake
Part: clutch sprocket cover only. Husqvarna part number 501 52 30-01 Condition: has a few minor cracks, is in usable/working order Fits: some models of older model (early) 61 and 162 models
husqvarna 61, 162 chainsaw old style metal clutch cover type 3
Part: clutch sprocket cover only Condition: has a few minor cracks, is in usable/working order Fits: some models of older model (early) 61 and 162 models
husqvarna 61, 162 se + chainsaw rewind spring washer / holder pn 501 52 95-02 new box h-25
Part: starter rewind spring and pulley guard ring washer / holder Part Number: 501 52 95-02 Condition: new aftermarket part Fits: Husqvarna 266xp 266se 266 268 268xp 272xp 268k, 272k, 162 se / sg, 181, 61, 272, 288, 281, 281 light and some other models Location: H-25
husqvarna 61, 162, 266 & Jonsered 630 chainsaw coarse thread clutch mechanism
Part: clutch mechanism Condition: good used/working shape Fits: Husqvarna 61, 266, 162 & Jonsered 630 chainsaw which are coarse thread
(3 in stock)
Husqvarna 61, 162, 266 & Jonsered 630 chainsaw fine thread clutch carrier
Part: clutch center rotor hub Condition: good used/working shape Fits: Husqvarna 61, 266, 162 & Jonsered 630 chainsaw which are fine thread
husqvarna 61, 162, 266 chainsaw old style brake handle guard
Part: metal brake handle hand guard Condition: good used/working shape Fits: some older (early) Husqvarna 61, 162, 266 162se models
husqvarna 61, 266 + chainsaw carb throttle shaft pn 501 81 44-01 new (bin H-22)
Part: carburetor throttle shaft Part # 501 81 44 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 61, 266, 181, 66 Location: Husky bin H-22
husqvarna 61, 266 + chainsaw oil cap gasket pn 501 62 68-01 new (bin H-18)
Part: oil cap gasket Part # 501 62 68 01 Condition: New old stock OEM part. May or may not be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 61, 266, 238, 340, 345, 350, 242, 42, 46, 266xp and many many others
husqvarna 61, 266 + chainsaw trigger spring used
Part: throttle trigger spring 501 52 88-01 Condition: good used/working shape Fits: Husqvarna 61, 266, 268, 272
husqvarna 61, 266 chainsaw flywheel and starter pawls type 3 (part # 501 52 52-02)
Part: Woodruff type key flywheel with starter pawl set. Pawl studs vary in cosmetic design. 501 51 69-80 501 51 65 Condition: Good used/working shape. No broken fins. Fits: some models of Husqvarna 266, 61, 266xp, 266se, 266 se xp 268se 268xp 268 xp 61 Rancher Practica. Jonsered 630 625 670 se...
husqvarna 61, 266 chainsaw flywheel key
Part: flywheel key Condition: good used/working shape Fits: Husqvarna 61, 266
husqvarna 61, 266 chainsaw metal clutch cover only type 4
Part: clutch sprocket cover guard Condition: good used/working shape. Has minor chipping and hairline cracks on back edges of cover Fits: some models of Husqvarna 266, 61
(1 in stock)
husqvarna 61, 266 chainsaw muffler bracket plate (type pn 501 60 84-01)
Part: muffler attachment plate Part # 501 60 84-01 Condition: good used/working order Fits: some models of Husqvarna 61 and 266
husqvarna 61, 266 chainsaw starter pulley
Part: starter pulley. Part # 503 10 24-05 Condition: good used/working shape Fits: Husqvarna 61, 266
husqvarna 61, 266 chainsaw starter recoil cover and pulley #3
Part: starter cover and pulley/spring Condition: has a lot of breaks as pictured but could be used Fits: Husqvarna 61, 266
husqvarna 61, 266 chainsaw starter recoil cover and pulley assembly #2
Part: starter housing cover with pulley and rewind spring. May not include grip. Condition: housing has a broken corner and has a few broken grills, in good used/working shape Fits: Husqvarna 266, 61
Husqvarna 61, 266 Chainsaw starter rewind recoil Spring 501 52 04-02 new (H-48)
Part: Recoil/starter spring Condition: New old stock from closed out dealer part number: 501 52 04-02 Fits: Husqvarna 61, 266, 288xp, 288lite, 288xpg, 181se, 281xp, 181, 281,lite,288, 272xpg,272k,272xp, 61 rancher, practica 266xp, 266SE, SE, XP, XPG, XPW, 162se, 162,268,268xp, 66, and jonsered 62...
husqvarna 61, 266, 162 chainsaw brake lever pn 501 82 32-01
Part: brake lever for the chainbrake Part # 501 82 32 01 Condition: good used/working order Fits: Husqvarna 61, 162, 266
(1 in stock)
Husqvarna 61, 266, 162 Chainsaw Idle Speed Screw
Part: Idle speed screw Condition: Good used/working shape Fits: Husqvarna 61, 266, 162
(1 in stock)
Husqvarna 61, 266, 268 Chainsaw Oil Worm Drive Gear
Part Name: oil pump worm drive gear. PN 501 51 38-01 Fits the Following Models: Husqvarna 61, 266, 268, 272, 272xp, 266xp, 266se, 266sg, 61 Rancher Practica, 162 SE SG, 162se, 66, 268xp xp. Jonsered 630 625 670 series Champ Super II etc. This is a USED part, in good working order.
husqvarna 61, 266, 268, 272 and jonsered 625, 630, 670 chainsaw tensioner adjust pin (266 bin)
Part: chain adjuster pin Condition: good used/working shape Fits: Husqvarna 266, 61, 268, 272 and jonsered 625, 630, 670
husqvarna 61, 266, 268, 272 chainsaw brake handle pivot bolt set type 1 late model
Part: brake bolt / pivot set. PN 503 52 08-01 and 501 76 80-01 Condition: good used/working shape Fits: late model (newer) Husqvarna 266, 61, 269, 272, Jonsered 630, 670, 625 chainsaws which have the plastic brake handle
Husqvarna 61, 266, 268, 272 Chainsaw Bucking Spike pn 501 52 81 01
Bucking Spike. Pn 501 52 81-01 In good used shape Fits:Husqvarna 61, 266, 268 272 266xp 272xp 268xp se sg xp Practica Rancher, 162se, 162sg 162. Jonsered Jonsereds 625 630 670 series Chainsaw
(4 in stock)
husqvarna 61, 266, 268, 272 chainsaw bucking spike pn 501 52 81-01 new (bin H30)
Part: bucking spike dog Part # 501 52 81 01 501528101 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 61, 266, 268, 272 Location: Husky Bin H-30
husqvarna 61, 266, 268, 272 chainsaw chip guard
Part: chip / dust guard for the clutch cover Part # 503 57 31-01 Condition: good used/working shape Fits: Husqvarna 61, 266, 268, 272
husqvarna 61, 266, 268, 272 chainsaw starter screw set of 4
Part: set of 4 screws for the starter cover Condition: good used/working order Fits: Husqvarna 61, 266, 268, 272
(2 in stock)
Husqvarna 61, 266, 268, 272 Chainsaw Throttle Trigger
Part Name: Throttle Trigger. Part # 501 51 80-02 Part Description: In good/working shape Fits the Following Models: Husqvarna 266, 268, 272, 61, 266xp, 272xp, 268xp, 266 SE SG XP
Husqvarna 61, 266, 268, 272 clutch sprocket drum with replacement rim
Part: clutch sprocket / drum. Includes a new replacement rim. Oregon 26831. 501 59 80-02 Condition: good used, working shape Fits: Husqvarna 61, 266, 268, 272, 272xp, 268xp, 266xp, 266se, 266 xp se sg, 66, 61 Practica Rancher. Jonsered Jonsereds 630 625 670 Series; turbo, champ, super, II
Husqvarna 61, 266, 268, 272 xp Chainsaw Throttle Safety Latch
Part Name: throttle safety interlock latch. part # 501 51 81-02 Condition: good used/working shape Fits: Husqvarna 61, 266, 268, 272 xp, 272xp, 266xp, 268xp, 61 Rancher Practica
husqvarna 61, 266, 272, 268 chainsaw recoil spring retainer/holder/carrier
Part: rewind spring holder. PN 501 52 95-02 Condition: good used/working shape Fits: Husqvarna 61, 266, 61, 272, 268, 288, 266se 266xp 272xp 268xp 288xp 281 181. Jonsered 625, 630, 670
husqvarna 61, 268 + chainsaw gasket pn 501 29 64-02 new bin h-50
Part: gasket Part # 501 29 64 02, 501296402, 501 29 64-01, 501296401, 501 29 64-03, 501296403 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 61, 268, 272, 181, 288, 2100, 285cd 2100cd 266se 266xp and many others with Tillotson HS c...
husqvarna 61, 268, 266 & jonsered 625, 630 chainsaw protection washer pn 501 53 59-01 new (box H-41)
Part: clutch protection washer Part # 501 53 59 01 Condition: new old stock part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 61, 266, 268. Jonsered 625, 630. Locati...
husqvarna 61, 268, 266, 272 chainsaw repair cup pn 501 53 18-01 new (box H-41)
Part: repair cup Part # 501 53 18 01 Condition: new old stock part. Fits: Husqvarna 61, 266, 268, 272 xp Location: Box H-41
husqvarna 61, 268, 272 chainsaw stop switch wire pn 501 83 98-01
Part: wire Part # 501 83 98 01 Condition: good used/working order Fits: Husqvarna 61, 268, 272 and many others
husqvarna 61, 272 chainsaw brake spring and knee joint lever set (late model)
Part: brake spring, knee joint lever, and spring Part # 503 70 99-01, 501 87 53-03 Condition: good used/working shape Fits: Husqvarna 272 xp and 61 late model (newer)
husqvarna 61, 480, 180 s chainsaw intake gasket pn 501 25 10-01 bin H-50 new
Part: intake gasket Part # 501 25 10 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 61, 480, 180 s Location: Bin H-50
husqvarna 61, 66 chainsaw starter pulley pn 503 10 24-02 new bin h-15
Part: starter pulley Part # 503 10 24 02 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 61, 66, 266 Location: Bin H-15
(3 in stock)
Husqvarna 61-272 Chainsaw Control Screw NEW 501 51 36-01 (H-0011)
Control screw. 501513601 New part from old dealer stock Fits Husqvarna 61, 162, 272, 266, 268
husqvarna 65 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring, grip Condition: good used/working order Fits: Husqvarna 65
(1 in stock)
husqvarna 65 chainsaw top cover shroud
Part: top cover engine shroud Condition: good used/working order Fits: Husqvarna 65
Husqvarna 65 L Chainsaw 3-pawl Flywheel and Starter Pawls
Part: Flywheel and starter pawls Condition: Good used/working shape. Fits: Husqvarna 65 77 L
Husqvarna 65 L Chainsaw Flywheel and Starter Pawls
Part: Flywheel and starter pawls assembly for two pawl style flywheel Condition: Good used/working shape. Fits: Husqvarna 65L
(1 in stock)
husqvarna 65, 77 chainsaw carb shaft pn 501 69 24-01 new (bin H-22)
Part: carb shaft Part # 501 69 24 01 Condition: New old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 65, 77 Location: Husky bin H-22
husqvarna 65, 77, 160, 163 + chainsaw herr .404-7t spur sprocket drum n301-b7
Part: .404" pitch x 7t spur sprocket drum for the clutch Herr Part # N301-b7 replaces PN 501 20 37-01 Condition: new Fits: some models of Husqvarna 65, 77, 160, 163, 180, 260, 263, 280, 380, 480
(3 in stock)
husqvarna 65l and 77l chainsaw chain tensioner adjuster
Part: chain tensioning screw with bar adjusting nut / pin. Part #S 501 15 43-01 and 501 22 68-01 Condition: good used/working shape Fits: Husqvarna 65 and 77 L
husqvarna 65l and 77l chainsaw choke rod
Part: choke rod link Part # 501 21 02-01 Condition: good used/working order Fits: Husqvarna 65 L and 77 L
husqvarna 65l and 77l chainsaw control panel
Part: control panel plate Part # 501 25 00-01 Condition: good used/working shape Fits: Husqvarna 65 and 77 L
husqvarna 65l and 77l chainsaw lower top handle bracket
Part: lower top handle bracket and bolt Part # 501 26 74-01, 501 26 75-01 Condition: good used/working shape Fits: Husqvarna 65 L and 77 L
(1 in stock)
husqvarna 65l and 77l chainsaw starter bushing cup
Part: starter bushing cup Part # 501 40 27-01 Condition: good used/working shape Fits: Husqvarna 65 L, 77 L
husqvarna 65l and 77l chainsaw starter housing cover
Part: starter / recoil fan housing cover Part # 501 43 02-01 Condition: good used/working shape Fits: Husqvarna 65 L and 77 L
husqvarna 65l and 77l chainsaw starter rewind spring and shield
Part: starter rewind spring and shield Part # 501 40 22-01, 501 40 21-01 Condition: good used/working shape Fits: Husqvarna 65 L, 77 L
husqvarna 65l and 77l chainsaw throttle link
Part: throttle link rod Condition: good used/working shape Fits: Husqvarna 65 l and 77 l
husqvarna 65l chainsaw air filter cover
Part: filter cover Part # 501 21 04-01 Condition: good used/working order Fits: Husqvarna 65 L
(2 in stock)
husqvarna 65l chainsaw carburetor bolt set
Part: set of carb bolts / screws and nuts Part # 204 13 07-09 Condition: good used/working shape Fits: Husqvarna 65 L
husqvarna 65l chainsaw clutch 3/8x8 spur sprocket drum
Part: 3/8-8 spur sprocket drum for the clutch only. Bearing not included. Part # 501 67 41-01 Condition: good used/working order Fits: Husqvarna 65 L
husqvarna 65L chainsaw clutch hub pn 501 27 79-01 new (box H-44)
Part: clutch hub / spider carrier Part # 501 27 79 01 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 65 L Location: Box H-44
husqvarna 65L chainsaw clutch mechanism
Part: clutch mechanism Condition: good used/working shape Fits: Husqvarna 65 L
husqvarna 65l chainsaw cylinder head bolt set
Part: set of 4 cylinder bolts / screws Condition: good used/working shape Fits: Husqvarna 65 L
husqvarna 65l chainsaw flywheel washer
Part: flywheel washer Condition: good used/working shape Fits: Husqvarna 65 L
husqvarna 65l chainsaw ignition coil
Part: Complete ignition kit. Includes: coil, points, condenser and stator plate. 501 43 67-01, 501 43 63-01, 501 43 60-01, 501 43 59-01 Condition: good used/working shape. tested and makes strong spark. Fits: husqvarna 65 L, 77l, 77 L
husqvarna 65L chainsaw ignition off switch and panel
Part: ignition off switch and panel Condition: good used/working shape-panel has an edge break Fits: Husqvarna 65 L
(2 in stock)
husqvarna 65l chainsaw intake manifold spacer
Part: carburetor intake manifold Part # 501 25 08-01 Condition: good used/working shape Fits: Husqvarna 65 L
Husqvarna 65L Chainsaw Large Size Rubber Buffer Mount Kit
Large size, late model, handle AV rubber buffer mounts, with sleeve. In good used shape Fits Husqvarna 65l, 77l, 65 77 L
husqvarna 65l chainsaw muffler kit
Part: muffler with bolts, gasket Condition: good used/working order Fits: Husqvarna 65 77 L 77L
(1 in stock)
husqvarna 65l chainsaw muffler only (bottom port style)
Part: muffler only bottom port style Condition: good used/working order-some minor rust/cover dents Fits: Husqvarna 65 L part # 501 41 77-01
(3 in stock)
Husqvarna 65l Chainsaw muffler only (front spark arrestor type)
Muffler only In good used shape, dented Fits Husqvarna 65L, 77L
husqvarna 65l chainsaw oil cap
Part: oil cap with keeper Condition: good used/working shape Fits: Husqvarna 65 L chainsaws
(3 in stock)
husqvarna 65l chainsaw oil pump assembly
Part: oil pump oiler with gear Condition: good used/working shape. Fits: Husqvarna 65 77 L 77l