husqvarna 40, 45 chainsaw walbro wt17b chainsaw carburetor
Part: Walbro WT 17B carburetor WT 17c Condition: good used physical shape. May need a carb rebuild kit. Fits: Walbro WT 17B
husqvarna 40, 45, 49 chainsaw screw pn 503 21 06-16 new (box H-49)
Part: pulley screw Part # 503 21 06 16 Condition: new old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 40, 45, 49 and some other models Location: Box H-49
husqvarna 40, 45, 49 chainsaw shorting lead 506 01 37-01 new oem (h-0015)
shorting lead wire part # 506013701 new old stock part from closed out dealer Fits Husqvarna 40, 45, 49
husqvarna 40, 50 + chainsaw screw pn 503 21 32-45 new (bin H-24)
Part: screw Part # 503 21 32 45 (replace PN 729 24 23-05) Condition: New old stock OEM Part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 40, 45 & 50, 51, 55 Location: new Husky bin H-24
(4 in stock)
husqvarna 40, 50 chainsaw starter pawl stud pn 501 64 67-01 new (bin H-24)
Part: starter pawl stud / pin Part # 501 64 67 01 Condition: New old stock OEM Part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 40, 50 Location: new Husky bin H-24
(1 in stock)
Husqvarna 41 Chainsaw Bearing and Seal 530 05 63-63 NEW (A588)
Crankshaft crank Bearing and Seal Assembly. 530-056363 NEW Fits Husqvarna 36 41 136 141 and others
Husqvarna 41 Chainsaw Fuel Tank Vent 530 02 98-68 NEW (A588)
Fuel tank vent plug 530-029868 NEW dusty from years of storage. Fits Husqvarna 36 41 136 141 and others
Husqvarna 41 Chainsaw Trigger Spring 530 02 98-61 NEW (A588)
Throttle trigger return spring 530-029861 NEW Fits Husqvarna 36 41 136 141 and others
husqvarna 41 chainsaw crankcase chassis with bar stud set
Part: crank case chassis oil tank housing with set of bar studs/bolts. 530069942, 530-069942, 530 06 99-42 Condition: good used/working shape. Has a melted section as pictured, no leaks. Fits: Husqvarna 41 36 136 141
(1 in stock)
husqvarna 41 chainsaw cylinder
Part: piston and cylinder with crankshaft, connecting rod, engine cap Condition: good used/working shape. Came off a saw with good compression. Fits: Husqvarna 41, 141 Jonsered 2040
(1 in stock)
husqvarna 41 chainsaw shortblock kit - piston, cylinder +
Part: piston and cylinder with crankshaft, connecting rod, engine cap Condition: good used/working shape. Came off a saw with good compression. Fits: Husqvarna 41, 141 Jonsered 2040
(1 in stock)
husqvarna 41 chainsaw starter recoil housing cover only
Part: fan housing starter cover Part # 530-047599 Condition: good used/working order Fits: Husqvarna 41
(1 in stock)
husqvarna 41 chainsaw top cover shroud (gray)
Part: top cover engine shroud. Does not include screws. Condition: good used/working shape Fits: Husqvarna 41
(1 in stock)
husqvarna 42 - 272xp chainsaw shorting lead wire 501 83 98-01 new (A588)
Part: stop switch kill shorting lead wire Part # 501 83 98 01 Condition: new old stock OEM part. Dusty/dirty from years of sitting in storage. Fits: Husqvarna 61 late, 268, 242, 254, 238, 272xp, 268xp, 242xp, 246, 42 Special, 254xp, 254se, 257xp, 261, 262xp....
(1 in stock)
husqvarna 42 chainsaw crankcase half - left flywheel side
Part: crank case housing half, left side 501 62 07-01 Condition: good used/working shape Fits: Husqvarna 42 and some models of 246
husqvarna 42 chainsaw muffler kit with bracket, bolts gasket
Part: muffler with exhaust gasket, bolts bracket Condition: good used/working order Fits: Husqvarna 42
(1 in stock)
Husqvarna 42 Chainsaw Starter Pulley new oem 501 79 44-01 (H1001)
Starter pulley rope spool pn# 501 79 44-01 new old stock from closed out dealer. Husqvarna 42, 242, 246
husqvarna 42 chainsaw starter recoil cover and pulley assembly #1
Part: starter housing cover with starter pulley, rewind spring and grip Part # 501 79 42-03 Condition: good used/working order Fits: Husqvarna 42
husqvarna 42 chainsaw top cover shroud (black)
Part: top cover engine shroud Condition: good used/working order Fits: Husqvarna 42
husqvarna 42 chainsaw top cover shroud (orange)
Part: top cover engine shroud Part # 503 45 59-01 Condition: good used/working order Fits: came off a Husqvarna 42, 242, 42 special
Husqvarna 42 chainsaw walbro hda 34a carburetor
Part: walbro hda34a carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Husqvarna 42
husqvarna 42 special chainsaw 6 piece av buffer mount set
Part: set of 6 av buffer mount / antivibe elements for the tank part # 501 62 87-01, 501 83 56-01 Condition: good used/working shape Fits: Husqvarna 42 special
(3 in stock)
Husqvarna 42 Special Chainsaw Carburetor Adjust Grommet
Part: carburetor adjust grommet Part # 501 62 86-01 Condition: cosmetically ugly but functional Fits: Husqvarna 42 Special 242
(4 in stock)
Husqvarna 42 Special Chainsaw Carburetor Adjust Grommet sleeve new oem 501 62 86-01 (H-18)
Part: carburetor adjust grommet sleeve Part # 501628601 Condition: New old stock from closed out dealer. Dusty/dirty from years of storage. Fits: Husqvarna 42 Special 242 and others.
(1 in stock)
Husqvarna 42 Special Chainsaw chainTensioner
Part Name: chain tensioning screw and bar adjusting pin. Part # 501 54 63-01, 501 45 41-01 Condition: good used/working shape Fits the Following Models: Husqvarna 42 Special , 246
husqvarna 42 special chainsaw clutch sprocket assembly
Part: clutch spur sprocket drum with mechanism (shoes, spring, carrier) Condition: good used/working shape Fits: Husqvarna 42 special
husqvarna 42 special chainsaw crankshaft and rod
Part: crank shaft with connecting rod Condition: good used/working shape Fits: Husqvarna 42 Special
husqvarna 42 special chainsaw decompression valve
Part: decomp valve Part # 503 66 54-01 Condition: good used/working shape Fits: Husqvarna 42 special
(3 in stock)
Husqvarna 42 Special Chainsaw filter mount
Part: air filter mount connector Part # 503 15 22-02 Condition: good used/working shape Fits: Husqvarna 42 special 242 242xp 246
(4 in stock)
Husqvarna 42 Special Chainsaw flywheel and starter pawls assembly
Part Name: flywheel with starter pawls / springs / studs. Condition Description: in good used shape-no breaks. Fits the Following Models: Husqvarna 42 Special
husqvarna 42 special chainsaw ignition coil and module set
Part: SEM ignition coil and module Part # 501 81 27-01 and 501 81 28-01 Condition: good used/working shape. Tested and works Fits: Husqvarna 42 special, 242, 242xp, 246
husqvarna 42 special chainsaw ignition off switch
Part: off switch part # 503 08 97-02 Condition: good used/working shape Fits: Husqvarna 42 special 242
husqvarna 42 special chainsaw lot of assorted hardware
Part: lot of misc. hardware - screws, bolts etc. (includes everything pictured) Condition: good used/working shape Fits: Husqvarna 42 special
Husqvarna 42 Special Chainsaw oil pump
Part Name: oil pump wih pickup line hose Condition: in good used/working shape. Has some minor oxidation Fits the Following Models: Husqvarna 42 Special
husqvarna 42 special chainsaw piston pin and bearing
Part: pin, bearing and keeper clip set for the piston Part # 737 44 10-00, 503 41 41-01 Condition: good used/working shape Fits: Husqvarna 42 special
husqvarna 42 special chainsaw piston wrist bearing 504 23 26-04 New (D1001)
Part: wrist pin bearing Part # 504232604 superseded by 503 41 41-01 Condition: new old stock from closed out dealer Fits: Husqvarna 42 special and some models of 246 and many more
Husqvarna 42 Special Chainsaw Pre Filter & Cover
Part: pre air filter and cover Part # 501 62 81-02 and 501 62 95-01 Condition: good used/working shape Fits: Husqvarna 42 Special
husqvarna 42 special chainsaw throttle safety and trigger kit
Part: throttle trigger and safety lever interlock with pins and spring part # 503 41 39-02, 503 41 38-02, 720 12 40-20, 720 12 42-20, 503 08 46-01 Condition: good used/working shape Fits: Husqvarna 42 special 242 246xp 246 xp
husqvarna 42 special chainsaw top wrap handle bar
Part: top handlebar Part # 501 62 90-03 Condition: good used/working shape Fits: Husqvarna 42 special, 242, 242xp, 246
(1 in stock)
husqvarna 42 special chainsaw trigger handle cover set
Part: cover set for the rear trigger handle Part # 503 48 45-01 Condition: good used/working shape Fits: Husqvarna 42 Special
husqvarna 42 special oil pump worm gear
Part: worm gear part # 501 58 36-01 Condition: good used/working shape Fits: Husqvarna 42 special
(3 in stock)
husqvarna 42 special oil pump worm gear 501 58 36-01 new (D1001)
Part: worm gear part # 501 58 36-01 Condition: New old stock from closed out dealer. Fits: Husqvarna 42 special
Husqvarna 42 Special starter cover and pulley assembly #2
Part: starter recoil housing cover with pulley, rewind spring and grip Condition: minor break on left upper corner and some havey grime. Fits the Following Models: Husqvarna 42 Special Part # 501 79 43-02, 501 79 44-01, 501 63 02-01, 503 54 39-01
husqvarna 42, 133, 154, 242, 246 + other models chainsaw gb starter rewind spring new replaces part # 501 63 02-01
Part: gb starter rewind spring Part # GB34014 replaces husqvarna part #s: HUSQVARNA 501 46 04-01 HUSQVARNA 501 46 04-02 HUSQVARNA 501 63 02-01 Condition: new, after-market part. Stens or Forrester brand. Fits: HUSQVARNA FITS MODELS 36R ,ALL 40, 42, 44, 45, 133, 140, 154, 165R, 240, 242, 244, 246,...
husqvarna 42, 133, 234, 238, 242 chainsaw herr .325-7t spur sprocket drum new pn n268-l7
Part: .325" pitch x 7T spur sprocket drum for the clutch Herr Part # N268 L7 replaces pn 503 44 49-01 Condition: new Fits: some models of Husqvarna 42, 133, 234, 238, 242 (before serial # 3441001)
husqvarna 42, 242 chainsaw fuel hose line
Part: fuel line Part # 501 79 52-01 Condition: good used/working order Fits: Husqvarna 42, 242
husqvarna 42, 242, 246 chainsaw air filter (felt)
Part: nylon air filter assembly Part # 503 15 19-05 Condition: good used/working order Fits: Husqvarna 42, 242, 246
husqvarna 42, 242, 246 chainsaw brake band
Part: brake band, part # 501 79 70-01 Condition: good used/working shape Fits: husqvarna 42, 246, 242
husqvarna 42, 242, 246 chainsaw brake band and knuckle joint
Part: brake band and knuckle, part # 501 79 70-01 Condition: good used/working shape Fits: husqvarna 42, 246, 242
husqvarna 42, 242, 246 chainsaw choke control rod
Part: choke control Part # 501 79 64-02 Condition: good used/working order Fits: Husqvarna 42, 242, 246
husqvarna 42, 242, 246 chainsaw nylon air filter 503 15 19-03 NEW (Misc 1E)
Part: nylon air filter assembly Part # 503 15 19-03 New AFTERMARKET part Fits: Husqvarna 42, 242, 246, 42 Special, 238 SE SG
(1 in stock)
husqvarna 42, 246, 242 chainsaw bar stud bolt pn 501 45 43-01 new box h-2
Part: bar stud / bolt, part # 501 45 43 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 42, 246, 242 and some other models Location: Box H-2
husqvarna 42, 246, 242 chainsaw safety throttle lock pn 503 41 39-02 new (box H-41)
Part: throttle safety lock Part # 503 41 39 02 Condition: new old stock part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 42, 242, 246 Location: Box H-41
husqvarna 42, 42 special chainsaw chainbrake assembly
Part: chainbrake - includes the clutch sprocket cover, hand guard, brake band, spring, cover Condition: good used/working order Fits: Husqvarna 42
Husqvarna 435 Chainsaw clutch cover
Clutch cover chainbrake assembly 501 38 82-01 In good used shape Fits Husqvarna 435
Husqvarna 435 Chainsaw Ignition Switch Wires
Part: Ignition switch wires Condition: good used/working shape Fits: Husqvarna 435 435e
husqvarna 435 chainsaw oil pump gear 544 21 24-02 new (D1001)
Part: oil pump oiler drive gear Part #544212402 Condition: new old stock from closed out dealer Fits: Some models of Husqvarna 435, 435e, 440e
Husqvarna 435 chainsaw starter recoil cover and pulley assembly 544 28 70 NEW OEM (HAB1)
Part: starter recoil cover with pulley, spring, grip. 544 28 70 504 59 70-02 Condition: NEW old stock from closed out dealer. Fits: Husqvarna 435
(1 in stock)
Husqvarna 435 e chainsaw hand guard
Part: brake hand guard, chainbrake handle Part # 544 25 15-01 Condition: good used/working order Fits: Husqvarna 435 435e
Husqvarna 44 Chainsaw Air Filter
Nylon air filter assy. Husqvarna part number 501 66 39-01 In good used shape Fits Husqvarna 44, 444, and 44 Rancher, and others
(3 in stock)
husqvarna 44 chainsaw air filter mount
Part: air filter mount. Husqvarna part number: 503 20 80-06 Condition: good used/working shape Fits: Husqvarna 44
husqvarna 44 chainsaw bracket pn 501 79 33-01 new bin h-51
Part: cylinder bracket Part # 501 79 33 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years or storage Fits: Husqvarna 44 Location: bin H-51
(3 in stock)
husqvarna 44 chainsaw carburetor bolt set
Part: carb bolts / screw set Condition: good used/working shape Fits: husqvarna 44
(2 in stock)
Husqvarna 44 Chainsaw Choke Rod
Part Name: Choke Rod Condition: good used/working shape Fits: Husqvarna 44 chainsaws
(1 in stock)
Husqvarna 44 Chainsaw Choke Rod 501 79 78 new (h-40)
Part Name: Choke Rod 501797802 Condition: New old stock from closed out dealer Fits: Husqvarna 44 chainsaws
(1 in stock)
Husqvarna 44 Chainsaw Choke Rod Grommet new old stock 501 47 79-02 (H-40)
Part Name: Choke Rod Grommet Condition: new old stock from closed out dealer Fits: Husqvarna 44 chainsaws
Husqvarna 44 Chainsaw Fuel line
Molded fuel line and filter In good used shape Fits Husqvarna 44, 444, Practica 40, 140, 240
husqvarna 44 chainsaw muffler bracket
Part: muffler bracket, pn 501 57 44-01 Condition: good used/working shape Fits: Husqvarna 44
husqvarna 44 chainsaw muffler gasket
Part: muffler gasket Condition: good used/working shape Fits: Husqvarna 44
Husqvarna 44 Chainsaw Starter Pulley
Part Name: Starter Pulley Condition: good used/working shape Fits: Husqvarna 44 chainsaws
Husqvarna 44 chainsaw top cover bracket stud
Part: top cover to cylinder attachment stud and bracket Part # 501 79 33 01 Condition: in good used shape Fits: Husqvarna 44, 444, 40 and others. Practica.
(1 in stock)
Husqvarna 44 Rancher Chainsaw Carb adjust Grommet
Carburetor adjustment needles grommet. Part number: 501 47 81-01 In good used shape Fits Husqvarna 44, 444, practica rancher and others
Husqvarna 44 Rancher Chainsaw Chainbrake Handle
Brake handle hand guard. Husqvarna part number: 50 18 235-01, 501 82 35-01, 501823501 In good used shape Fits Husqvarna 44 444 rancher practica, 140s and others
Husqvarna 44 Rancher Chainsaw Crankshaft
Crank and rod. Husqvarna part number 501 61 50-02 In good used shape. Includes crankshaft with rod only. Fits Husqvarna 44, 44 Rancher, 44 Practica, 444 se sg and others
Husqvarna 44 Rancher Chainsaw phelon Ignition Coil used
one piece phelon electronic ignition coil kit. Husqvarna part number: 501 67 91 60 Tested, in good used shape Fits Husqvarna 44 Practica Rancher, 444 SE, and others
(1 in stock)
husqvarna 44, 238 + chainsaw seal pn 503 26 02-02 new bin h-51
Part: sealing ring Part # 503 26 02 02 Condition: new old stock OEM part Fits: Husqvarna 246, 42, 44, 238, may also fit other models Location: bin H-51
husqvarna 44, 240 + chainsaw cir clip set 501 45 24-01 new (h-51)
Part: circlip set for the piston Part # 501452401 Condition: new part from old stock dealer Fits: Husqvarna 44, 444, 240 SE & SG Location: Husky bin h-51
(1 in stock)
husqvarna 44, 240 + chainsaw muffler bracket pn 501 57 44-01 new bin h-51
Part: muffler support bracket Part # 501 57 44 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years or storage Fits: Husqvarna 44, 444, 340, 240 Location: bin H-51
(2 in stock)
husqvarna 44, 40, 340 se/sg chainsaw starter pawl new pn 501 46 57-01 (box H-21)
Part: (1) starter pawl for the flywheel Part # 501 46 57 01 Condition: new, old stock Fits: Husqvarna 40, 44, 340 se, 340 sg and some other models
husqvarna 44, 444 chainsaw clutch cover with brake parts
Part: clutch sprocket cover with brake band, springs, lever for the chainbrake Part#s 501 82 83-02, 501 82 84-01, 501 76 49-01 Condition: good used/working order. Upper corner chipped off. Fits: Husqvarna 44, 444
husqvarna 44, 444 chainsaw complete clutch assembly
Part: rim sprocket drum with clutch mechanism (shoes, spring, rotor) washer and a new replacement rim .325 -7. 501 45 71-01, 503 08 87-01 Condition: good used/working shape Fits: Husqvarna 44, 444
husqvarna 44, 444 chainsaw complete oil pump assembly
Part: oil pump oiler with worm gear and line / hose Part # 501 58 29-02 Condition: good used/working order Fits: husqvarna 44, 444
(2 in stock)
husqvarna 44, 444 chainsaw muffler (type 2)
Part: muffler Condition: good used/working shape Fits: Husqvarna 44, 444
husqvarna 44, 444 chainsaw muffler bolt
Part: (1) muffler bolt / screw Condition: good used/working shape Fits: Husqvarna 44, 444
(1 in stock)
husqvarna 44, 444 chainsaw muffler spacer new pn 501 53 82-02 (box h-21)
Part: spacer for the muffler Part # 501 53 82 02 Condition: new, old stock Fits: Husqvarna 44, 444 and some other models
husqvarna 44, 444 chainsaw screw pn 501 82 51-01 new (bin H-11)
Part: starter screw Part # 501 82 51 01 Condition: new old stock OEM part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 44, 444 Location: Husky Bin H-11
(1 in stock)
husqvarna 44, 444 chainsaw throttle lock pn 501 82 08-01 new (bin H-11)
Part: throttle safety lever Part # 501 82 08 01 Condition: New old stock OEM part. May be dusty/dirty/have minor scuffs from years of storage. Fits: Husqvarna 44, 444 Location: Husky Bin H-11
Husqvarna 44, 444, 140 Chainsaw Top Front Handle bar
Husqvarna 44, 444, 140 Top Front Handlebar. In good used shape, not cracked or bent. Some minor dings/gouges in the rubber gripping.
husqvarna 44, 444, 281 + chainsaw brake nut pn 501 83 10-01 new (Loc: H-15)
Part: brake nut Part # 501 83 10 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 181, 61, 266, 281, 44, 444, may also fit other models Location: Bin H-15
husqvarna 44, 61, 162, 444, 240 chainsaw early model vented oil cap (61 bin)
Part: vented oil cap Condition: good usable shape. may or may not have keeper. Fits: early model Husqvarna 44, 444, 61, 162, 240 which have the vented caps with orange bungs
(1 in stock)
husqvarna 440, 445 chainsaw ignition coil
Part: ignition coil module 544 24 38-01 504 57 14-01 Condition: good used/working order. Tested and works with good spark Fits: Husqvarna 440, 445, 450
husqvarna 444 chainsaw starter recoil cover and pulley
Part: starter cover with pulley and spring Condition: good used/working shape-several broken grills on right section of the cover Fits: Husqvarna 444
husqvarna 444, 133 chainsaw gasket pn 501 45 66-01 new bin h-50
Part: gasket Part # 501 45 66 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 133, 444 Location: Bin H-50
husqvarna 444, 162 chainsaw screw pn 503 20 40-02 new (bin H-24)
Part: screw, FS 4×8 Part # 503 20 40 02 Condition: New old stock OEM Part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 444, 162 Location: new Husky bin H-24
husqvarna 444, 238 + chainsaw spacer pn 501 59 74-01 new (bin H-24)
Part: spacer Part # 501 59 74 01 Condition: New old stock OEM Part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 444, 238, 154, 254, 181, 288, 181 Location: new Husky bin H-24
husqvarna 444, 238 chainsaw gasket pn 501 46 44-01 new bin h-50
Part: gasket Part # 501 46 44 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 238, 444, may also fit other models Location: Bin H-50
(2 in stock)
husqvarna 444, 44 chainsaw muffler bracket
Part: muffler support bracket, part # 501 57 44-01 Condition: good used/working shape Fits: husqvarna 44, 444
husqvarna 444, 44 chainsaw saw dust guard pn 501 82 91-01 new box h-2
Part: sawdust chip guard Part Number: 501 82 91 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 444, 44 Location: Box H-2
husqvarna 444, 44 chainsaw spark plug wire pn 501 53 16-01 new box h-12
Part: spark plug wire Part Number: 501 53 16 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 44, 444 and some trimmer models Location: Box H-12