husqvarna 394 chainsaw crankcase half (right, clutch side)
Part: crank case housing half Condition: Some oxidation and staining. Good thread holes, and in good usable shape. Fits: Husqvarna 394, 395xp
(4 in stock)
husqvarna 394 chainsaw crankshaft with connecting rod
Part: crank shaft with rod 501 81 61-02, 501 81 49-02 Condition: good used/working shape Fits: Husqvarna 394
(1 in stock)
husqvarna 394 chainsaw cylinder av spring mount
Part: cylinder av spring mount Condition: good used/working shape Fits: Husqvarna 394
Husqvarna 394 chainsaw Exhaust Support 503 52 29-01 New (H-56)
Part: Exhaust Support. 503522901 Condition: New old stock OEM part Fits: 394
husqvarna 394 chainsaw ignition off switch
Part: off stop switch 503 71 79-01 Condition: good used/working shape Fits: Husqvarna 394 395 xp 394xp 395xp
husqvarna 394 chainsaw insert cover, part # 501 49 27-03
Part: insert cover, part # 501 49 27 03 Condition: good used/working shape Fits: husqvarna 394 257 and others
husqvarna 394 chainsaw intake manifold spacer kit
Part: carburetor intake manifold spacer Part # 503 47 12-01 Condition: good used/working shape Fits: Husqvarna 394xp, 394 xp
(1 in stock)
Husqvarna 394 Chainsaw Low Air Filter Cover new 503 52 65-01 OEM NOS (HAB1)
Low rise standard air filter cover 503526501 superseded to 503 52 65-02 New old stock from closed out dealer. May have some scuffs and be dusty/dirty from years of storage. Fits 394xp, 394 xp with the low air filter
husqvarna 394 chainsaw rear trigger handle cover set
Part: set of handle covers- part # 503 48 45-01 Condition: good used/working shape Fits: Husqvarna 394
husqvarna 394 chainsaw spring side support mount pn 503 52 87-01 new box H-23
Part: Cylinder av spring top handle mount Part Number: 503 52 87 01 Condition: new aftermarket part Fits: 394xp, 395xp, 394 395 xp and others Location: Box H-23
husqvarna 394 chainsaw starter recoil cover and pulley assembly
Part: starter fan housing cover with pulley, rewind spring Part # 503 46 24-01 (503 46 25-01, 501 89 67-02, 503 13 50-01) Condition: good used/working shape. Heavy rope wear at starter rope ferrule Fits: Husqvarna 394, 394xp, 394 395 xp,
(1 in stock)
Husqvarna 394 Chainsaw Tank AV Spring Mount new 503 46 85-01 (H-14)
Part Name: Tank AV Spring Mount 503 46 85-01 Condition: new old stock Fits: Husqvarna 394 chainsaws-Husky 395XP, 395 xp
(1 in stock)
Husqvarna 394 Chainsaw Throttle Cable new oem 503 52 04-02 (H-66)
Part: throttle cable 503 52 04-02 Condition: New old stock from closed out dealer. Fits: Husqvarna 394 chainsaws-may also fit Husky 395 XP
husqvarna 394 chainsaw throttle trigger and cable set
Part: throttle trigger with cable wire, part #s 503 47 11-01 & 503 52 04-02 Condition: good used/working shape Fits: husqvarna 394 395 xp 394xp 395xp
husqvarna 394 chainsaw top cover shroud
Part: top cover, part of 503 52 64-06 Condition: good used/working shape with no breaks-has some minor melting and some grime on the underside of the cover Fits: Husqvarna 394 394xp
husqvarna 394 chainsaw top cover shroud 503 52 63 new OEM (HAB3)
Part: top cover, part of 503 52 64-06. Superseded to 503526407 Condition: new old stock from closed out dealer. A bit dusty/dirty and may have a few scuffs from years of storage. Fits: Husqvarna 394 394xp
husqvarna 394 chainsaw walbro wj 70 carburetor
Part: walbro WJ70 carburetor. PN 503 28 12-15 Condition: good used physical shape. May need a carb rebuil dkit Fits: Husqvarna 394
husqvarna 394 xp chainsaw ignition coil
Part: ignition coil 503 63 98-01 Condition: good used shape. Tested and works may or may not include switch wire Fits: Husqvarna 394XP 395XP 394 395 xp
husqvarna 394 xp chainsaw oil pump oiler
Part: oil pump with worm drive gear, oil line and filter 503 46 37-02 Condition: good used/working shape Fits: Husqvarna 394XP, 395xp, 395 xp
(2 in stock)
Husqvarna 394 xp chainsaw oil pump oiler ONLY
Part: oil pump only 503 46 37-02 Condition: good used/working shape Fits: Husqvarna 394XP, 395xp, 395 xp
husqvarna 394 xp chainsaw rim sprocket clutch assembly
Part: clutch assembly-includes the sprocket/drum, mechanism and bearing. Comes with new 3/8-7 rim sprocket installed. 503 70 15-02, 503 62 59-03 Condition: good used/working shape Fits: Husqvarna 394xp, 395xp, 395 xp and others
husqvarna 394 xp chainsaw spring mount set of 3
Part: set of 3 av spring mounts Condition: good used/working shape Fits: Husqvarna 394XP
husqvarna 394, 395 chainsaw av spring mount 503 46 94-02
Part: antivibe element / av spring mount Part # 503 46 94 02 Condition: in good used shape Fits: Husqvarna 394, 395xp
(1 in stock)
husqvarna 394, 395 chainsaw av spring mount 503 46 94-02 new oem (H-18)
Part: antivibe element / av spring mount Part # 503469402 Condition: new old stock from closed out dealer. Fits: Husqvarna 394, 395xp
(2 in stock)
husqvarna 394, 395 chainsaw av spring mount hard pn 503 46 95-02 new (h-45)
Part: antivibe element / av spring mount Part # 503 46 95 02 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 394, 395 Location: Box H-45
(1 in stock)
husqvarna 394, 395 chainsaw av spring mount std pn 503 46 88-01 new (h-14)
Part: antivibe element / av spring mount Part # 503 46 88 01 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 394, 395
(1 in stock)
husqvarna 394, 395 chainsaw av spring mount std pn 503 46 95-01 new (h-14)
Part: antivibe element / av spring mount Part # 503 46 95 01 Condition: New old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 394, 395
husqvarna 394, 395 chainsaw chain catcher stop
Part: chain catcher, part # 503 47 05-01 Condition: shows wear, is in usable shape Fits: husqvarna 394, 395 and some other models
(1 in stock)
husqvarna 394, 395 chainsaw spark arrestor type muffler new replaces pn 503 71 13-04 (bulky bin 1000)
Part: spark arrestor type muffler Part # 503 71 13 04 Condition: new, after-market Fits: Husqvarna 394xp, 395xp, 394xpg, 395xpg, 395xpw, 394xpw.
husqvarna 394, 395 chainsw worm drive gear pn 503 55 75-01 new (box H-43)
Part: worm wheel drive gear Part # 503 55 75 01 Condition: new old stock OEM part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 394, 395 Location: Box H-43
(2 in stock)
husqvarna 394, 395 xp chainsaw top wrap handle bar new OEM pn 503 46 35-01 (HVB3)
Part: top front handlebar Part # 503 46 35 01, 503 46 35-71 Condition: new old stock from closed out dealer. Fits: Husqvarna 394, 395 xp, 395xp
husqvarna 394, 395 xp chainsaw top wrap handle bar new pn 503 46 35-01
Part: top front handlebar Part # 503 46 35 01, 503 46 35-71 Condition: new aftermarket part Fits: Husqvarna 394, 395 xp, 395xp
husqvarna 394, 395, 385, 281, 288 chainsaw clutch mechanism new replaces pn 503 70 15-02 (bin 539)
Part: clutch mechanism - springs, rotor, shoes Replaces Part # 503 70 15-02 Condition: new, after-market part Fits: Husqvarna: 394xp, 395xp, 394, 395 xp, 281, 288xp, 288 xp lite and others. Jonsered 2094 2095 Turbo Location: box 539
(3 in stock)
Husqvarna 394xp Chainsaw Gasket Set 503 47 37-01 (HVA Bulky 1000)
Gasket set. 503473701 New part from old dealer stock Fits Husqvarna chainsaw models: 394 xp
husqvarna 395 chainsaw 56mm piston kit new
Part: 56mm piston with rings, pin and keepers. Part number 537 13 76-71 Condition: new, after-market part Fits: Husqvarna 395 xp, 395xp Location: new piston box
(3 in stock)
husqvarna 395 chainsaw choke rod new replaces part # 537 01 83-01 (bin 530)
Part:choke rod control Replaces Part # 537 01 83 01 Condition: new, after-market part Fits: Husqvarna 395xp, 395 xp Location: box 530
(2 in stock)
husqvarna 395 chainsaw choke rod used
Part: choke control rod Fits: Husqvarna 395 Part # 537 01 83 01 Condition: good used shape
Husqvarna 395 Chainsaw clutch cover 503 72 08-01 NEW (1Q)
Clutch brake cover only. Part number 503 72 08 01 NEW aftermarket part Fits Husqvarna 394, 394xp, 395XP, 395 xp
(1 in stock)
Husqvarna 395 Chainsaw Grommet Part # 537 08 83-01 new (N101)
crank case grommet New old stock from closed out dealer Husqvarna 395 550xp 562 and others
(2 in stock)
husqvarna 395 chainsaw piston and cylinder set new, after-market (bulky bin 1000)
Part: piston and cylinder with rings, wrist pin, clips. Part number 503 99 39-71 Condition: new, after-market part Fits: Husqvarna 395
(2 in stock)
husqvarna 395 chainsaw throttle cable wire new replaces pn 503 71 76-02 (H-49)
Part: throttle cable wire Replaces Part # 503 71 76 02 Condition: new, after-market part Fits: Husqvarna 395
husqvarna 395, 365 + chainsaw lever connector pn 503 68 41-01 new box h-12
Part: connector lever. Black or white in color. Part Number: 503 68 41-01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 395, 365, 362, 385, 372 and some other models Location: Box H-12
husqvarna 395, 372 + chainsaw screw 503 20 34-19
Part: starter cover screw Part# 503 20 34 19 Condition: good used shape Fits: Husqvarna 395, 385, 372, 351, 359
Husqvarna 395, 372 + chainsaw screw 503 20 34-25
Part: top cylinder cover screw Part# 503 20 34 25 Condition: good used shape Fits: Husqvarna 395, 385, 372, 351, 359
(1 in stock)
Husqvarna 395, 372 + chainsaw screw 503 20 34-25 new (H-48)
Part: top cylinder cover screw Part# 503 20 34 25 Condition: new old stock from closed out dealer. May have slight surface rust/oxidation from years of storage. Fits: Husqvarna 395, 385, 372, 351, 359
husqvarna 395, 372 + chainsaw screw pn 503 20 34-19 new bin h-50
Part: starter cover screw Part# 503 20 34 19 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 395, 385, 372, 351, 359, 372xp, 371xp, 365, 362 sp special, 385xp, 390xp, 390 xp 575 xp. Jonsered 2156 2159 2065 2063 2071 2077 2163 2165 ...
(3 in stock)
husqvarna 395, 372, 362 chainsaw spacer pipe pn 503 70 11-01 new bin h-51
Part: spacer pipe Part # 503 70 11 01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years or storage Fits: Husqvarna 395, 362, 372 Location: bin H-51
(4 in stock)
husqvarna 395, 394 thread insert pn 503 75 38-01 new box h-2
Part: thread insert Part Number: 503 75 38-01 Condition: new old stock OEM part, may be dusty/dirty/have minor oxidation from years of storage Fits: Husqvarna 395, 394 Location: Box H-2
Husqvarna 395xp Chainsaw Brake Band new 503 72 07-02 (H-0015)
Chainbrake band and spring. 503 72 07-02 NOS new from closed out dealer stock Fits Husqvarna 394 395 XP 394xp 395xp
(1 in stock)
Husqvarna 395xp Chainsaw Fuel Tank Handle Assembly new old stock oem 503 47 34-01 (MGSFU)
Gas tank, rear trigger handle. Includes throttle trigger, cable and safety interlock. 503 47 34-01 New old stock from closed out dealer. A bit dusty and faded from years of storage. May have a few small scuffs. Fits 394 395 XP, 394xp
Husqvarna 395xp Chainsaw intake boot
Intake manifold boot 503 96 97-01 In good used shape Fits Husqvarna 395 xp
Husqvarna 395xp Chainsaw starter assembly
Starter assembly complete with cover, pulley, spring and pull rope. Husqvarna part number: 503 46 24-02 In working condition. One hole cut out of grills, and there has been a minor repair to the spring keeper with a nut and screw. Fits Husqvarna 395...
(1 in stock)
Husqvarna 395xp Chainsaw starter pulley disc 503 74 36-01 (H-0015)
starter pulley disc dust shield 5037436-01 NEW from old dealer stock Fits Husqvarna 394xp 395xp 394 395 xp and some cut off saws
husqvarna 395xp chainsaw top cover shroud
Part: top cover engine shroud. Part of 503 52 64-09 Condition: in working/usable shape. Fits: husqvarna 395 xp
husqvarna 40 & 45 chainsaw air filter and mount
Part: air filter and mount Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 40 / 45 chainsaw chainbrake handle
Part: chain brake handle / hand guard Condition: good used/working shape. May be grey or orange Fits: Husqvarna 40, 45
Husqvarna 40 45 Chainsaw Flywheel and Starter Pawl set type 1 (non cast key)
Part: flywheel and starter pawls. Part number 506 02 61-06 Condition: good used/working shape Fits: Husqvarna 40, 45 models with woodruff keyed flywheels
Husqvarna 40 45 Chainsaw Flywheel Cover/Shroud
Part: flywheel cover / air conductor. Part # 503 10 69-03 Condition: good used/working shape Fits: Husqvarna 40, 45
Husqvarna 40 45 Chainsaw Oil Pump
Part: oil pump oiler Condition: good used, working shape Fits: Husqvarna 40, 45
Husqvarna 40 45 Chainsaw Oil Pump kit
Part: oil pump oiler kit Condition: good used, working shape Fits: Husqvarna 40, 45
husqvarna 40 chainsaw complete starter recoil and pulley kit
Part: starter housing cover with pulley, rewind spring, shroud Part # 503 10 59-06, 506 01 64-01, 501 76 31-01, 503 10 69-03 Condition: housing cover has several cracked grilles, in good used/working order Fits: Husqvarna 45, 40
husqvarna 40 chainsaw piston and cylinder kit
Part: cylinder and piston kit, includes the ring and pin Condition: good used/working shape. Came off a saw with good compression. No broken fins. Fits: Husqvarna 40
Husqvarna 40 chainsaw piston assembly 40mm HU0006 (Box Z)
Piston w/ rings, wrist pin, and clips Husqvarna Part Number 503 48 90-01, 503489001 New aftermarket part Fits Husqvarna 40, Jonsered 2041, and Pioneer Partner 400
(1 in stock)
Husqvarna 40 Chainsaw Top Cover/Shroud
Part: top cover engine shroud Condition: good used/working shape. Will most likely not include decals. Fits: husqvarna 40
(4 in stock)
Husqvarna 40 Chainsaw Walbro Carburetor
Part: walbro carburetor Condition: good used physical shape. May or may not need a carb rebuild kit Fits: Husqvarna 40
(1 in stock)
husqvarna 40 series chainsaw starter rewind spring new replaces part # 501 46 04-01 Total No 402 (H-4)
Part: Total starter rewind spring Part # 402 replaces part #s 501 46 04 01 and 501 46 04-02 Condition: new old stock, after-market part Fits: husqvarna 36r, all 40 series, 44, 45, 140, 165r, 240, 244, 340, 444 chainsaws and husqvarna trimmers 36r, 140r, 244r Jonsereds trimmer Rs 45 RS45
husqvarna 40 series, 44, 45, 140, 165r, 240, 244, 340, 444 chainsaw starter rewind spring new replaces part # 501 46 04-01
Part: gb starter rewind spring Part # 34012 replaces part #s 501 46 04 01 and 501 46 04-02 Condition: new, after-market part Fits: husqvarna 36r, all 40 series, 44, 45, 140, 165r, 240, 244, 340, 444 chainsaws and husqvarna trimmers 36r, 140r, 244r
(1 in stock)
husqvarna 40, 244rx, 39r, 240r + choke flap new pn 502 10 32-01 (box h-21)
Part: choke flap for the carburetor Part # 502 10 32 01 Condition: new, old stock Fits: Husqvarna 40, 244rx, 39r, 240r, 240rx, 245r
(1 in stock)
husqvarna 40, 45 and jonsered 2050, 2041, 2045 turbo chainsaw starter pulley
Part: starter pulley. Part # 506 01 64-01 Condition: good used/working shape Fits: Husqvarna 40, 45 and Jonsered 2050, 2041, 2045
husqvarna 40, 45 chainsaw assorted hardware lot - screws
Part: lot of assorted hardware – screws, nuts – everything pictured Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 40, 45 chainsaw av spring mount #3 with hardware
Part: av spring mount with tie strap, screws, and cover Condition: good used/working shape Fits: Husqvarna 40, 45
(1 in stock)
husqvarna 40, 45 chainsaw av spring mount strap 503 11 92-02 new (H-7)
Part: av spring mount tie strap Condition: new oem old stock from closed out dealer. Fits: Husqvarna 40, 45, 49
husqvarna 40, 45 chainsaw carburetor gasket
Part: carb gasket Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 40, 45 chainsaw chain catcher
Part: chain catcher stop. Part # 506 03 16-04 Condition: good used/working shape Fits: husqvarna 40, 45
husqvarna 40, 45 chainsaw choke rod
Part: choke rod lever. 5031052-03 503 10 52-03 Condition: good used/working shape Fits: Husqvarna 40, 45, 49
husqvarna 40, 45 chainsaw choke rod NEW (H-56)
Part: choke rod lever. 5031052-03 503 10 52-03 Condition: new old stock OEM part Fits: Husqvarna 40, 45, 49
husqvarna 40, 45 chainsaw clutch cover
Part: clutch cover only, part of 503 10 63-02 Condition: good used/working shape Fits: Husqvarna 40, 45, 49
husqvarna 40, 45 chainsaw cylinder av spring mount #1 pn 506 01 47-01 used
Part: av spring mount, part # 506 01 47-01 Condition: good used/working shape Fits: Husqvarna 40, 45
(2 in stock)
husqvarna 40, 45 chainsaw filter housing base only
Part: carburetor intake base Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 40, 45 chainsaw flywheel and starter pawl set type 2 (with cast key)
Part: flywheel with starter pawls/springs/studs. Part # 503 59 46-03, 503 59 46-04 503 59 46-02 Condition: good used/working shape Fits: Husqvarna 40, 45 models with cast key flywheels
husqvarna 40, 45 chainsaw front handle bar
Part: top front handlebar. Part # 503 10 57-01, 503 73 77-01 Condition: good used/working shape Fits: Husqvarna 40, 45, 49
husqvarna 40, 45 chainsaw guide used pn 503 74 81-01
Part: guide Condition: good used/working shape Fits: Husqvarna 40, 45
(1 in stock)
husqvarna 40, 45 chainsaw ignition coil
Part: ignition coil Condition: good used shape. Tested and works with strong spark. Fits: Husqvarna 40, 45
(1 in stock)
husqvarna 40, 45 chainsaw intake boot
Part: intake manifold boot Condition: good used/working shape Fits: husqvarna 40, 45
husqvarna 40, 45 chainsaw muffler bolt set
Part: muffler bolts Condition: good used/working shape Fits: husqvarna 40, 45
husqvarna 40, 45 chainsaw oil pump guide
Part: oil guide, part # 506 02 42-01 Condition: good used/working shape Fits: Husqvarna 40, 45 and some other models
Husqvarna 40, 45 chainsaw oil suction hose cpl 503 10 16-01 (h-57)
Part: oil suction hose part # 503101601 Condition: new old stock from closed out dealer Fits: Husqvarna 40, 45 and some other models
(1 in stock)
husqvarna 40, 45 chainsaw right rear trigger handle half
Part:right rear trigger handle half Condition: good used/working shape Fits: Husqvarna 40, 45, 49
(1 in stock)
husqvarna 40, 45 chainsaw throttle safety interlock lever
Part: throttle safety interlock release Part # 506 01 45-02 Condition: good used/working shape may be gray or orange Fits: Husqvarna 40, 45
husqvarna 40, 45 chainsaw top cover 503 50 20-06 NEW (H-1000)
Top cover cylinder shroud. Husqvarna part number 503 50 20-06 New old stock OEM part. . Fits Husqvarna 40, 45 an 49
husqvarna 40, 45 chainsaw walbro wt17b chainsaw carburetor
Part: Walbro WT 17B carburetor WT 17c Condition: good used physical shape. May need a carb rebuild kit. Fits: Walbro WT 17B
husqvarna 40, 45, 49 chainsaw screw pn 503 21 06-16 new (box H-49)
Part: pulley screw Part # 503 21 06 16 Condition: new old stock OEM part. Dusty/dirty from years of storage. Fits: Husqvarna 40, 45, 49 and some other models Location: Box H-49
husqvarna 40, 45, 49 chainsaw shorting lead 506 01 37-01 new oem (h-0015)
shorting lead wire part # 506013701 new old stock part from closed out dealer Fits Husqvarna 40, 45, 49
(1 in stock)
husqvarna 40, 50 + chainsaw screw pn 503 21 32-45 new (bin H-24)
Part: screw Part # 503 21 32 45 (replace PN 729 24 23-05) Condition: New old stock OEM Part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 40, 45 & 50, 51, 55 Location: new Husky bin H-24
(4 in stock)
husqvarna 40, 50 chainsaw starter pawl stud pn 501 64 67-01 new (bin H-24)
Part: starter pawl stud / pin Part # 501 64 67 01 Condition: New old stock OEM Part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 40, 50 Location: new Husky bin H-24
(1 in stock)
Husqvarna 41 Chainsaw Bearing and Seal 530 05 63-63 NEW (A588)
Crankshaft crank Bearing and Seal Assembly. 530-056363 NEW Fits Husqvarna 36 41 136 141 and others
(1 in stock)
Husqvarna 41 Chainsaw Fuel Tank Vent 530 02 98-68 NEW (A588)
Fuel tank vent plug 530-029868 NEW dusty from years of storage. Fits Husqvarna 36 41 136 141 and others
Husqvarna 41 Chainsaw Trigger Spring 530 02 98-61 NEW (A588)
Throttle trigger return spring 530-029861 NEW Fits Husqvarna 36 41 136 141 and others
husqvarna 41 chainsaw crankcase chassis with bar stud set
Part: crank case chassis oil tank housing with set of bar studs/bolts. 530069942, 530-069942, 530 06 99-42 Condition: good used/working shape. Has a melted section as pictured, no leaks. Fits: Husqvarna 41 36 136 141