Homelite 500 Chainsaw Complete Clutch Assembly
Complete clutch assembly includes: sprocket drum, bearing, race, mechanism with shoes, springs and carrier, hardware. In good used shape Fits Homelite 500
Homelite 500 Chainsaw Cylinder Cover
Cylinder top cover. 57105 In good used shape. Has one minor crack, as pictured, from a bolt hole to the plug hole that you cannot see when installed. Fits Homelite 500
Homelite 500 Chainsaw ID Tag Plate
Blue model and serial number ID plate. In good used shape For the Homelite 500 model.
Homelite 500 Chainsaw Rear Carburetor Cover
Rear carburetor and air filter lower bottom housing. 57121 In good used shape Fits Homelite 500
Homelite 500 Chainsaw Top Handle
Aluminum tube wrap around top handle. In good used shape Fits Homelite 500
Homelite 540 Chainsaw Solid State Ignition Coil
Prufrex electronic ignition coil. 98751 Tested, in good used shape Fits Homelite 540 and 8800
(2 in stock)
HOMELITE 58726 main bearing XL12 SXL12 XL15 58726
Part: bearing Part number: 58726 Condition: good used shape Fits: many XL12, XL-12, SXL12, XL15, XL-15
Homelite 600d Chainsaw Manual Oil Pump
Manual bar oil pump assembly. A74406, A-74406, 71764, 71762, In good used shapes. Fits many models of Homelite chainsaw. 660d 600d 700d 5-20 17 4-20 and many others
Homelite 650, 750 chainsaw cover throttle handle
Part: Homelite 650 750 cover throttle handle 12616-2a, 126162a Condition: good used/working shape Fits: 650, 750
Homelite 650, 750 chainsaw crankcase
Crankcase a-93957 a93957 (with roller bearing, seal and worm gear) Condition: good used working order. Fits Homelite 650, 750
Homelite 650, 750 chainsaw starter recoil assembly
Part: starter recoil rewind housing cover assembly complete. Includes: cover with pulley spring and mechanism. Condition: good used/working shape Fits: Homelite 650 & 750
homelite 660d chainsaw fuel/gas cap
Part: fuel cap Condition: good used/working shape color may vary Fits: Homelite 660 D , zip , wiz and many others
homelite 660d chainsaw reed valve assembly
Part: reed valve assembly. PN 55934 Condition: good used/working shape Fits: Homelite 660 600 D 600d 660d
Homelite 7-19 Chainsaw Tillotson HL Carburetor
Tillotson HL4a HL4 a HL 4 4a carb carburetor In good used physical shape, may or may not need fresh diaphragms installed. Fits Homelite Model 17, 7-19, 4-20, 5-20 and others
Homelite 7-29 Chainsaw Starter Drum Cover
Starter pulley cover In good used shape Fits Homelite 17, 7-29, 7-19, 5-20 and many many others
Homelite 750 Chainsaw Bottom Handle Brace
Bottom handle brace frame. In good used shape Fits Homelite 750 650
Homelite 750 chainsaw cylinder and piston (with connecting rod)
Part: Homelite 750 cylinder, cylinder and piston (with connecting rod) a-70489, a70489a, a-70527-a, a70572a, a-70274,a70274 Condition: Good used, working condition. Fits: 650, 650 Super, 750
Homelite 9/16" Scratcher Chainsaw Cutters and Repair Links Kit AA-31246 NEW (HOSE)
Assorted left and right hand side cutters, pre-sets, rivets, and tie straps. Remnants and parts of several AA-31246 kits NEW Fits 9/16" pitch Homelite scratcher style chain found on Models 20MCS 26LCS 30MCS 17 and others.
homelite c series chainsaw fuel cap type 1 (with o ring)
Part: fuel gas cap with O ring Condition: good used/working shape Fits: C-5, C-9, C-7, C-51, C-72, C-91, Old Super XL, SXL Auto, XL Automatic, XL-12
homelite c series chainsaw muffler assembly
Part: stamped tin steel muffler Condition: good used/working shape Fits: Homelite C Series chainsaws. C5 C51 C52 C7 C72 C9 C91 C 5 51 52 7 72 9 91 and others
homelite c series chainsaw stack muffler
Part: stack muffler Condition: good used/working shape Fits: Homelite C series - C-5, C-7, C-9, C-52, C-51
Homelite C-5 Chainsaw model identification tag
Model ID tag plate In good used shape Fits Homelite c5, c-5
Homelite C-5 Chainsaw Starter Assembly
Fairbanks Morse friction shoe starter recoil rewind assembly. In good used shape Fits Homelite C-Series chainsaws. c5, c-5, c-7, c7, c-9, c9
homelite c-5, c-51, c-52 chainsaw tillotson hl141c carburetor
Part: tillotson HL 141c carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Homelite c5, c51, c52, c-7, c-72 and others
Homelite C-7 Chainsaw Piston and Cylinder Set
2" Bore Top end motor kit includes: cylinder head, piston, rings, and pin. A-58653, A58653, 58174-A, 58174a In good used shape Fits Homelite C7 C-7 and other C-series chainsaws.
(1 in stock)
Homelite C-72 Chainsaw Cylinder Shroud
Cylinder head cover shroud In good used shape Fits Homelite C72 and others
Homelite C-72 Chainsaw Piston with rings
Piston with rings and pin A-58653-C, A58653-c, a-58653c. a58653c In excellent used shape Fits Homelite C-Series
Homelite c-72 chainsaw starter housing cover only
Part: starter rewind housing cover a-64178-3a, A641783a, A64178-3a Condition: good used/working shape Fits: homelite c72
Homelite C-72 Chainsaw Top Handle
Top wrap handle A-58379-2, A583792 In good used shape Fits Homelite C-series C-5, C5, C-51, C-52, C-7, C-72 and others
Homelite C-9 Chainsaw Cylinder
Cylinder head. 2-1/16" bore 58174-a In good used shape Fits Homelite C-9 C-91 C9 C91
Homelite C-9 Chainsaw Cylinder Head
Cylinder head 2-1/16" Bore In good used shape Fits Homelite C9 C-9 C91 C-91
homelite C-9 chainsaw reed valve assembly
Part: reed valve assembly Condition: good used/working shape Fits: Homelite C-9, c9, c series, c 9
Homelite C-series Chainsaw Fuel line Kit
Gas line kit includes: inner line, outer line, fitting, and fuel filter with pickup body. In good used shape Fits Homelite C5 C7 C9 C51 C52 C71 C72 C91 C 5 7 9 51 52 7 72 91
Homelite Chainsaw Large 16" Bar Cover
16" long large size bar cover, works well for longer bars too In excellent condition
Homelite Chainsaw Small 12" Bar Cover
12" long Small size bar cover, works well for smaller bars too In excellent condition
Homelite CS 50 Chainsaw Rear Handle Assembly
rear trigger handle assembly. Includes rear handle half, top handle bar, hand guard and mounting bracket In good used shape Fits Homelite CS-50, CS50, and others
(2 in stock)
Homelite CS-40 Chainsaw Clutch cover
Bar and clutch cover. A-00226, A0226 In good used shape Fits Homelite CS-40, CS-50, 300 Classic and others
homelite CS-50 chainsaw carburetor spacer manifold
Part: carb spacer intake manifold with screws bolts Part # 04509 Condition: good used/working shape Fits:Homelite CS 50 CS50 and others
homelite CS-50 chainsaw choke rod
PART: choke rod pull CONDITION: good used/working order FITS: Some models of Homelite 300 classic, CS-50, 250 and others.
homelite CS-50 chainsaw gas/fuel tank
Part: fuel tank Part number: 00223 Condition: good used/working shape-no leaks Fits: Homelite CS50 CS 40 50 and others
(1 in stock)
homelite CS-50 chainsaw inner guide bar plate
Part: inner bar plate Part number: 98278 Condition: good used/working shape Fits: Homelite CS50 CS 50 CS-40 300 and many others
(1 in stock)
Homelite CS-50 chainsaw lot of assorted hardware
Lot of assorted hardware from a CS-50. Includes all in photo. Good used shape. Fits Homelite CS 50 CS50
(1 in stock)
Homelite CS-50 chainsaw walbro wt 282 chainsaw carburetor
Part: Walbro WT-282. WT282 Condition: good used physical shape. May need a carb rebuild kit. Fits: CS-50 and others
Homelite CS-50 Chainsaw Zama carb
ZAMA C1Q-H32 carb assembly In good used physical condition, may or may not need fresh gasket and diaphragm kit Fits Homelite CS-50, 300 classic and others
Homelite CS-50 Classic Chainsaw spur Type Clutch Assembly
clutch assembly includes: 3 shoe mechanism with spring, sprocket drum, bearing, race, and washer. 00995 , 69423 , 64333 In good used shape Fits Homelite CS40 CS50 CS 40 50 and others
(1 in stock)
homelite cs50 300 classic chainsaw starter cover and pulley assembly
Part: starter housing cover with rewind spring and pulley Condition: good used/working shape Fits: Homelite 300 classic, cs-50, cs 50
Homelite DM50 Chop Saw Belt 46068 (HAR-D)
Ribbed v belt 46068, UP06392 new old stock Fits Homelite DM-50 Demo saw
(2 in stock)
Homelite EZ Chainsaw Old Style Top Front Handle
Part: Old style painted top Handle Bar Condition: good used/working shape-not cracked or bent Fits: Homelite EZ, EZ Auto, Super EZ
Homelite EZ Chainsaw Tillotson HL Carburetor
Tillotson HL104a carb In good used physical shape. May or may not need fresh gaskets and diaphragm installed Fits old Homelite EZ and others
homelite LX30 chainsaw throttle trigger pn 69874
Part: throttle trigger, part # 69874 Condition: good used/working shape Fits: Homelite LX 30, XL, Bandit and many others Location: XL bin
(1 in stock)
Homelite MP-38 Cut-off saw Drive Case Cover
Clutch side cover guard pn# A-02329 Good Used/ Usable Homelite MP38
(1 in stock)
Homelite MP38 Multi-Purpose Saw Muffler
Muffler exhaust In good used shape Fits Homelite MP-38 Demo saw
(1 in stock)
homelite pro 4620c 46cc chainsaw flywheel cover baffle
Part: fan housing baffle / flywheel cover Part # 518055 Condition: good used/working shape Fits: Homelite pro 4620 c, 46cc
homelite pro 4620c, 46cc chainsaw air filter assembly
Part: air filter and base with screws Condition: good used/working shape Fits: Homelite Pro 4620 c, 46cc
homelite pro 4620c, 46cc chainsaw carburetor
Part: carburetor Condition: good used physical shape Fits: Homelite Pro 4620 C, 46cc chainsaws
(2 in stock)
homelite pro 4620c, 46cc chainsaw chain catcher
Part: Chaincatch chain stop Condition: good used/working shape Fits: Homelite Pro 4620 C, 46cc
homelite pro 4620c, 46cc chainsaw choke rod
Part: choke rod lever Condition: good used/working shape Fits: Homelite Pro 4620 C, 46cc
(1 in stock)
Homelite pro 4620c, 46cc chainsaw cylinder and piston set
Top end motor kit includes: cylinder, piston, ring, and wrist pin. 640200007, 678747001, 640350003 Condition: good used/working shape. No breaks, good bore Fits: Homelite Ryobi pro 4620 c, 46cc, UT 10518 and others
homelite pro 4620c, 46cc chainsaw ignition coil
Part: ignition coil module Condition: good used/working shape. Tested and makes strong spark Fits:Homelite Pro 4620 C, 46cc, 45cc, Timberman 45
homelite pro 4620c, 46cc chainsaw oil pump kit
Part: oil pump oiler with worm gear and intake tube assembly. Part # 300945001, 300950001 Condition: good used/working shape Fits: Homelite Pro 4620 C, 46cc
Homelite Ranger 33cc 38cc Chainsaw Hand Guard
Hand guard or chainbrake handle UP06568 In good used shape Fits Many homelite models 33cc 38cc 45cc UT10926 and others
Homelite Ranger 33cc Chainsaw EZ Pull Starter
EZ pull starter recoil rewind assembly In good used shape Fits many newer homelite 33cc ranger
Homelite Ranger 33cc Chainsaw Rigid Top Handle UP06974A
Plastic wrap around top handle for rigid handle saws with no AV spring mounts UP 06974A, 06974 a In good used shape Fits Many homelite models 33cc UT10926 and others
Homelite Ranger 33cc Chainsaw Starter Spring
Starter recoil rewind spring UP 04092, up04092, a97908 In good used shape Fits many models of Homelite chainsaw
Homelite Ranger 45cc Chainsaw Shortblock
Short block motor assembly. Includes: cylinder, piston with ring, wrist pin, and crankshaft In good used shape Fits Homelite 45cc chainsaw UT10910
(3 in stock)
homelite super 2 chainsaw engine housing #2 early model
Part: metal rear trigger handle / engine case body housing, bare bones. 95271 Condition: good used/working shape. has some minor chipping Fits: homelite super 2
(2 in stock)
homelite super 2 chainsaw front throttle trigger and throttle lever
Part: front throttle trigger and throttle lever Condition: good used/working shape Fits: Homelite Super 2, XL-2, XL2
homelite super 2 chainsaw hdc 57 carburetor
Part: Walbro HDC57 carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Homelite Super 2, XL, XL2, XL-2, VI Super 2
Homelite super 2 chainsaw hdc 60 carburetor
Part: Walbro HDC60 fully adjustable carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Homelite Super 2
homelite super 2 chainsaw hdc 65 carburetor
Part: Walbro HDC65 fully adjustable carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Homelite Super 2, xl
Homelite Super 2 Chainsaw Ignition Off Switch
Part: Ignition off switch. A-94721 Condition: Good used/working shape Fits: Homelite Super 2, XL, XL2, XL-2 and others
Homelite Super 2 Chainsaw Late Model Piston and Cylinder Set
Top end motor kit includes: cylinder head, piston, ring, wrist pin and clips. In good used shape Fits later model Homelites with solid state electronic ignitions. Super 2, XL etc.
Homelite Super 2 Chainsaw Metal Starter Recoil Cover and Pulley assembly REBUILT
Part: Starter recoil cover and pulley-metal (early model) Condition: Good used/working shape, rebuilt with new rope, cleaned and oiled Fits: Homelite Super 2, XL
homelite super 2 chainsaw oil connector and duckbill valve
Part: oil connector with valve Part # 69451, 69659-b Condition: good used/working order Fits: Homelite Super 2
Homelite Super 2 Chainsaw Oil Strainer
Oil pickup filter A-68593, A68593 In good used shape Fits Homelite Super 2, XL, XL-2, XL2 and others
Homelite Super 2 Chainsaw Points Type ignition coil 69323 NEW (H-EAD)
Points type ignition coil 69323 NEW Fits Homelite XL-2, XL2, Super 2, xl
homelite super 2 chainsaw rear handle cover with throttle trigger, lever and rod (type pn 98021)
Part: rear handle cover with throttle rod, rear trigger and throttle rod and spring Part # 98021 Condition: good used/working order Fits: some models of Homelite Super 2, and XL
Homelite Super 2 Chainsaw Reed Valve
Part: reed valve Condition: good used/working shape Fits: Homelite Super 2
Homelite Super 2 Chainsaw Throttle rod and spring
Throttle rod and spring. Homelite part numbers: A-69136, 69249 In good used shape Fits Homelite Super 2, XL-2
homelite Super 2 chainsaw zama c1q-h17A carburetor (for built in oil pumps)
Part: zama c1q H17C carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Homelite Super 2 chainsaw with built in oil pumps
homelite super 2 chainsaw zama C2S-h5 fully adjustable carburetor
PART: zama C2S-H5 fully adjustable carburetor PN a-96481, A96481 CONDITION: good used physical shape, may need a carb rebuild kit FITS: Homelite Super 2, xl and others
homelite super 2, xl chainsaw 3/8 lp x 6 clutch spur sprocket drum
Part: 3/8 LP - 6T clutch spur sprocket drum, does NOT have the needle bearing Condition: good used/working shape Fits: Homelite XL and Super 2
homelite super 2, xl chainsaw air filter cover
Part: air filter cover. may vary in cosmetic design. Condition: good used/working shape Fits: Homelite Super 2 & XL
homelite super 2, xl chainsaw complete clutch assembly
PART: clutch assy. - includes the spur sprocket drum and bearing, washer and clutch mechanism. 6 tooth 3/8lp CONDITION: good used/working order FITS: Homelite xl and super 2
Homelite Super 2, xl Chainsaw Oil Cap
Part: Oil Cap with cork gasket Condition: Good used/working shape Fits: Homelite Super 2, XL
(1 in stock)
Homelite Super 2, xl Chainsaw Oil Cap no gasket
Part: Oil Cap Condition: Good used/working shape Fits: Homelite Super 2, XL
homelite super 2, xl chainsaw red fuel cap #2 with gasket
Part: fuel /gas cap with cork gasket. May vary in cosmetic design. Condition: good used/working shape Fits: Homelite super 2, XL, LX30 bandit, 192 200 classic and many others
homelite super 2, xl chainsaw starter pulley
Part: late model, plastic starter pulley Part #s 97768-a Condition: good used/working order. Fits: Homelite Super 2, xl and some other models
Homelite Super EZ Auto Chainsaw Flywheel type 1 (wico)
Part: Wico flywheel and starter pawls Condition: good used/working shape. No broken fins. Fits: Homelite Super EZ, Super EZ Automatic, SEZ-AO, Super EZ Auto.
Homelite Super EZ Auto Chainsaw Shortblock
Short block motor includes: cylinder, piston, crankshaft, case and etc. as pictured In good used shape Fits Homelite Super EZ Automatic with points type ignition.
homelite super ez Auto chainsaw solid state ignition coil
Part: prestolite solid state ignition coil with terminal boot and spring Replaces Part # A94111S / a 94111 s, A94111-s, A-94111s Condition: tested, in good used shape Fits: Homelite Super EZ, EZ-mini, VI Super mini
(1 in stock)
Homelite Super EZ Auto Decompression/Release Lever Assy
Part Description: includes the compression release lever, valve, spring, clamp, nut, screws Condition: nice used shape Fits the Following Models: Homelite Super EZ Auto, Super EZ Automatic, SEZ AO This is a USED part, in good working order.
Homelite Super EZ Automatic Chainsaw Complete Original
Homelite Super EZ Auto, Automatic Complete used chainsaw. In super nice original condition. Starts runs, and works. A bit hard to start when cold, but hey it's pretty old. Includes original wrench and plastic carry case.
homelite super ez chainsaw 3/8-7 clutch spur sprocket drum
Part: 3/8" pitch, 7 tooth, clutch sprocket drum Condition: good used/working shape Fits: Homelite Super EZ Auto, SEZ Automatic, EZ Auto, SEZ-AO
Homelite Super EZ Chainsaw bar chain tensioner adjuster
Part: chain tensioner screw and bar adjusting nut. Part # 65175-a and 65112-1 Condition: good used/working shape Fits: Homelite Super EZ, Super EZ Automatic, Super EZ Auto, SEZ AO
homelite super ez chainsaw clutch bearing and race
Part: bearing and race for the clutch Part # 64124, 65746-b Condition: good used/working order Fits: homelite super ez, 150 auto
homelite super ez chainsaw clutch side cover
Part: drivecase clutch cover. Part # 65131-a / 65131 Condition: good used/working shape Fits: Homelite Super EZ, Super EZ Automatic, SEZ Auto, EZ Automatic
Homelite Super EZ Chainsaw Complete S-Type Clutch Assembly
Complete clutch assembly. Includes: s-clutch mechanism, sprocket drum, needle bearing and race and washer etc. 65064, 65746B, 64124, A12294, A69953, 683621A, 69915, 803612 In good used shape Fits Homelite: Super EZ Automatic, Super EZ, EZ Automatic, EZ 250, XL-mini, 150 Auto
Homelite Super EZ Chainsaw Crankshaft
Part: crank shaft 650062 Condition: good used/working shape Fits: Homelite Super EZ Auto Automatic