homelite xl-101 chainsaw piston and cylinder kit
Part: piston and cylinder with rings Condition: good used/working shape. Came off a saw with good compression. No breaks. Fits: Homlelite XL 101 / XL101
(1 in stock)
homelite xl-101 chainsaw red rear trigger handle housing
Part: red rear trigger handle housing-bare bones Condition: good used/working shape Fits: Homelite XL 101 / XL101
Homelite XL-101 Chainsaw Reed Valve Assembly
Part: Reed Valve Assembly Condition: Good used/working shape Fits: Homelite XL 101, XL101, XL123, XL-123, XL76, XL-76
homelite xl-101 chainsaw sdc carburetor #1
Part: Walbro SDC carburetor Condition: good used physical shape-may or may not need a carb rebuild kit and cleaning Fits: Homelite XL 101 / XL101, XL123, XL-123, XL-76, XL76
(1 in stock)
homelite xl-101 chainsaw shield retaining ring
Part: shield retaining ring Condition: good used/working shape Fits: Homelite XL101 / XL 101
homelite xl-101 chainsaw starter pulley
Part: starter pulley drum Condition: good used/working shape Fits: Homelite XL101
(1 in stock)
homelite xl-101 chainsaw starter recoil cover only
Part: starter housing cover only Condition: good used/working shape Fits: Homelite XL101 & XL 101
(1 in stock)
homelite xl-101 chainsaw top handle bar
Part: front handlebar Condition: good used/working order: Fits: Homelite XL 101
homelite xl-101 chainsaw walbro carburetor #2
Part: Walbro Carburetor Condition: good used physical shape-may or may not need a carb rebuild kit Fits: Homelite XL 101 / XL101
homelite xl-101 chainsaw wico flywheel assembly
Part: wico flywheel rotor with starter pawls, studs, springs and screen Condition: good used/working order Fits: Homelite xl 101
Homelite XL-101, xl-102 Chainsaw Air Filter
Part: air filter Condition: used/working shape Fits: Homelite XL 101 & XL 102
Homelite XL-101, xl-102 Chainsaw Bar Chain Tensioner Adjuster
Part: chain tensioning screw with bar adjusting pin Condition: Good used/working shape Fits: Homelite XL 101, 102
homelite xl-101, xl-102 chainsaw muffler bolt
Part: muffler bolt Condition: good used/working shape Fits: Homelite XL 101 / 102
homelite xl-101, xl-102 chainsaw windsor clutch spur sprocket new (bin 9)
Part: windsor or sabre clutch spur sprocket and bearing Windsor Part # HO 182 A7, Herr N156 A7 Condition: new Fits: Homelite XL 101, XL 102
homelite xl-101, xl-102 chainsaw windsor clutch spur sprocket new HO 181A7 (box 9)
Part: windsor clutch spur sprocket and bearing. 3/8" pitch 7 tooth Windsor Part # HO181-a7, n181-a7 Condition: new Fits: Homelite XL 101, XL 102 with 7/16" shaft 1968 year and on Box 9
homelite xl-101, xl-102, xl-103, xl-104, xl-114, xl-123, 76 chainsaw 3/8-7 clutch sprocket drum with replacement rim
Part: 3/8-7 clutch sprocket drum with a new replacement rim Condition: good used/working order Fits: Homelite xl 101, 102, 103, 104, 114, 123, 76
homelite xl-102 chainsaw starter pulley
Part: starter pulley drum Condition: good used/working shape Fits: Homelite XL 102 / XL102
homelite xl-102 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley and spring Condition: good used/working shape Fits: Homelite XL 102
(2 in stock)
homelite xl-102, xl-101 chainsaw red air filter cover and knob
Part: red air filter cover Condition: good used/working shape Fits: Homelite XL 102, XL 101
homelite xl-102, xl-103, xl-104 chainsaw clutch/drivecase cover and tensioner
Part: drivecase cover with chain tensioner adjuster screw, nut and pin Part #s a-64620-1, 65944, 81211, 65768-1 Condition: good used/working order, has a minor hairline crack beginning but not going all the way through around the tensioner screw opening Fits: Homelite XL 102, 103 and 104
(1 in stock)
Homelite XL-103 Chainsaw cylinder 69718 NEW (HAR-D)
Cylinder head 69718, 63165-A NEW old stock part Fits Homelite XL101, XL102, XL103, XL 101 102 103 series
Homelite XL-114 chainsaw chain tensioner assembly
Bar Chain tensioner adjuster In good used shape Fits Homelite XL 114, XL-113
Homelite xl-12 chainsaw 3/8 -7 oregon sprocket drum new pn 30666X (sprkt bin F)
Part: Oregon clutch spur sprocket drum, 3/8 x 7 tooth Part # 30666 X Condition: new. Has some rust from years of storage Fits: Homelite SOME xl12 Super XL, XL-400, Remington PL4, Woodsman, Logger and many others. See photo for full listing.
Homelite XL-12 Chainsaw Choke Rod
Part: Choke rod Condition: good used/working condition Fits: Homelite XL-12
(2 in stock)
homelite xl-12 chainsaw complete wico flywheel assembly
Part: wico flywheel assembly with screen, starter pawls, spring, studs Condition: good used/working order with no broken fins Fits: Homelite XL 12
homelite xl-12 chainsaw crankshaft and connecting rod
Part: crank shaft, connecting rod, wrist pin, and woodruff key Part # 63497-1, a-63477-b Condition: good used/woking shape Fits: Homelite XL 12
Homelite XL-12 Chainsaw Cylinder A-69715 NEW (HOS-E)
Cylinder head a69715, a58706b, A-58706-B, a58706-b NEW Fits Homelite XL-12, XL12
(1 in stock)
Homelite XL-12 Chainsaw Drive Case (red) New 58738D (HM-995)
Part: Drive case with bar studs 58738-D Condition: New, old dealer stock Fits: Homelite XL12
(2 in stock)
Homelite XL-12 Chainsaw front Handle Bar
Part: Top handle, Handlebar. PN a-58793-B, a58793b, a-58793b Condition: good used/working condition Fits: Homelite xl 12, Older Super XL, Super XL Auto
homelite xl-12 chainsaw gb 3/8" -7T pro spur sprocket drum new (new sprkt box 10)
Part: GB clutch pro spur sprocket drum -3/8" pitch, 7 teeth Replaces Part # GB HO102-A7N, HERR N147 A7, Sandvik Windsor XL33-A7, Homelite 37990 Condition: new, oxidated and dirty from years of storage Fits: Homelite Super XL, XL 12 / XL12 (before serial # 1735838) Many Remington PL and SL ser...
(1 in stock)
homelite xl-12 chainsaw handle bar bracket
Part: handle bar bracket Part # 59246-7 59651 Condition: good used/working order Fits: Homelite XL 12
homelite xl-12 chainsaw inlet check valve pn A-59010 new box 111
Part: inlet check valve Part Number: A59010 Condition: new old stock part-may be dusty/dirty/have minor rust from years of storage Fits: Homelite XL-12 Location: Box 111
homelite xl-12 chainsaw metal oil line and valve
Part: oil line and valve Condition: good used/woking shape Fits: Homelite XL12
Homelite XL-12 Chainsaw Muffler body chrome
Muffler body only In good used shape Fits older Homelite Super XL, XL Auto, XL-12
Homelite XL-12 chainsaw oil pickup filter assembly A-69371 new (bin 80)
Oil pickup and filter assembly Part number a69371 a 69371 New old stock Fits Homelite XLAO XL-AO XL12
Homelite XL-12 Chainsaw Oil Pump Parts lot
Part: Oil pump parts-includes everything pictured Condition: good used/working condition Fits: Homelite XL12
homelite xl-12 chainsaw old model 3/8-7 clutch rim sprocket drum
Part: 3/8-7 rim sprocket drum and bearing with a new replacement rim ; Oregon brand Condition: good used/working order, no wear on teeth Fits: some older (early) models of Homelite XL 12
homelite XL-12 chainsaw piston and cylinder kit
Part: piston and cylinder with rings and pin. Homelite part numbers: A69715, A58903C, 58877. Condition: good used/working shape. Came off a saw with good compression, no breaks. Fits: Homelite XL-12
Homelite XL-12 chainsaw piston ring set 58877 (Bin 70)
Piston ring set of two 1-3/4" bore. Homelite part number: 58877 New aftermarket part Fits Homelite XL-12
homelite xl-12 chainsaw points and condenser set
Part: points and condenser Condition: good used/working shape Fits: Homelite XL12 / XL 12
homelite xl-12 chainsaw points set
Part: points Condition: good used/working shape Fits: Homelite XL12 / XL 12
Homelite XL-12 Chainsaw Rear Handle A-67838 NEW (HAR-D)
Red rear trigger handle casting a67838 NEW old stock part Fits Homelite XL-12, XL12
Homelite XL-12 Chainsaw Starter Cover Complete Recoil Assembly, Blue
Part: blue starter cover housing with pulley, spring and grip Condition: Good used/working shape Fits: Homelite XL 12
homelite XL-12 Rear trigger handle assembly (red)
Part: rear trigger handle (red) with trigger, interlock, oil pump, and reed Condition: good used/working condition Fits: Homelite XL12
homelite xl-12, super xl chainsaw oil cap (early model, metal)
Part: oil tank filler cap Condition: good used/woking shape Fits: Homelite XL and XL 12 early (older models)
homelite xl-12, super xl, super xl-12 solid state ignition coil module new pn replaces pn A 94605 S (box 515)
Part: solid state ignition coil module. Includes terminal boot Condition: new, after-market part Part # Replaces Homelite Part # A-94605-S, a94605s, A-94605s, A94605-S Fits:some models of Homelite Super XL, XL 12, Super XL 12, SXL Auto
(4 in stock)
homelite xl-12, xl-15, xl-400 + chainsaw herr .404-7 spur sprocket drum new pn n147-b7
Part: .404" pitch x 7T spur sprocket drum and bearing for the clutch Herr Part # n147 b7 Condition: new Fits: some models of Homelite xl-12 (before sn 1735838), xl-15, xl-400, xl-500, xl-600, xl-700, c-52
(2 in stock)
homelite xl-123 chainsaw air filter cover and knob
Part: air filter cover and knob Condition: good used/working shape Fits: Homelite XL 123
homelite xl-123 chainsaw air filter cover bracket
Part: air filter bracket Part # a-68056 Condition: good used/working order Fits: Homelite xl 123
homelite xl-123 chainsaw air filter cover nut
Part:air filter cover/nut Fits: Homelite XL 123 Condition: good used/working shape
(2 in stock)
homelite xl-123 chainsaw bar nut set
Part: set of bar nuts and washers Condition: good used/working shape Fits: Homelite XL 123
(1 in stock)
homelite xl-123 chainsaw breaker points cover
Part: cover for the points Condition: good used/working shape Fits: Homelite XL 123
(4 in stock)
homelite xl-123 chainsaw choke rod
Part: choke rod . PN 67000-1 Condition: good used/working shape Fits: Homelite XL123, XL76, XL-76
(1 in stock)
homelite xl-123 chainsaw clutch sprocket assembly
Part: clutch assy, includes the spur sprocket drum, the clutch mechanism (plate, shoes, spings) washers, race and bearing. 2-13/16" OD on drum 3/4" Hole in center to receive bearing 3/8" Threaded hole in center of clutch mechanism Condition: good used/working shape Fits: Homelite XL123/ XL 123...
Homelite XL-123 chainsaw complete muffler assembly
Muffler assembly complete In good used shape Fits Homelite XL76, XL-76, XL-123, XL123 and can be used on the XL 101 102 103 112 113 series
homelite xl-123 chainsaw ignition off switch
Part: off switch Condition: good used/working shape Fits: Homelite xl-123
homelite xl-123 chainsaw intake manifold
Part: intake manifold Condition: good used/working shape Fits: Homelite XL 123
homelite xl-123 chainsaw muffler cover and spark arrestor
Part: muffler cover and spark arrestor Condition: good used/working shape, has rust Fits: Homelite XL 123
homelite xl-123 chainsaw retainer pn 68751 new (bin 58)
Part: retainer Part # 68751 Condition: new old stock part. May be dusty/dirty from years of storage. Fits: some Homelite XL 123 models Location: box 58
Homelite XL-123 Chainsaw Screen type starter cover A-67192-B NEW (HOB-O)
Screen tpe starter rewind recoil cover A-67192B, A-63511 NEW old stock part Fits XL123, XL76, XL-76 and many others
(1 in stock)
Homelite xl-123 chainsaw starter recoil cover and pulley assembly #1
Part: starter cover with pulley Condition: good used shape-does not fully rewind/needs new rewind spring Fits: Homelite XL 123
homelite xl-123 chainsaw starter recoil cover and pulley assembly #2 complete
Part: starter housing cover with pulley, rewind spring, screen and grip Condition: good used/working shape Fits: came of a Homelite xl 123, will also fit xl-76
Homelite XL-123 Chainsaw tank gasket 65364-a NEW (HOB-O)
Gas tank half with bar studs 65364a NEW old stock part Fits XL123, XL76, XL-76 and many others
(1 in stock)
Homelite XL-123 Chainsaw tank half with bar studs A-68042-A NEW (HOB-O)
Gas tank half with bar studs A-64786-1A, A647861a, A68042-A NEW old stock part Fits XL123, XL76, XL-76 and many others
(1 in stock)
homelite xl-123 chainsaw throttle link
Part: throttle link Condition: good used/working shape Fits: Homelite XL 123
homelite xl-123 chainsaw throttle trigger
Part: throttle trigger Condition: good used/working shape Fits: Homelite XL 123
(1 in stock)
homelite xl-123 chainsaw wico flywheel and starter pawls
Part: Wico flywheel rotor with starter pawl set. Pn 63637 Condition: good used/working shape. No broken fins. Fits: Homelite XL123 / XL 123
homelite xl-123, VI 123 chainsaw bucking spike new part # A-64722 (hm box 69)
Part: bucking spike part # A 64722, a64722 Condition: new old stock part. Dusty/dirty from year of storage Fits: Homelite XL 123, VI 123, XL-76, XL76, XL 101 102 103 112 113, XL 101, XL102, XL101, XL103, XL112, XL113 and others. Location: box 69
homelite xl-12chainsaw oil tube, filter and fitting #1
Part: oil line, oil filter and elbow fitting Condition: good used/working shape Fits: Homelite XL12
Homelite xl-2 chainsaw Cap & Gasket a-70445 NEW (29A)
For Homelite XL2 Chainsaws Part # :a-70446/ A 70445/ A-69277a cap w/ gasket. Red or black in color. Fits Homelite XL2/ XL 2 models and some other models New old stock part from closed out dealer Location: box 29a
(1 in stock)
Homelite XL-2 Chainsaw Crankshaft A-69132 NEW (HOS-E)
Crankshaft A69132 NEW Fits Homelite XL2
homelite xl-2 chainsaw fuel tank with cap
Part: fuel tank with cap, fuel filter and line Condition: good used/working shape Fits: Homelite XL 2
Homelite XL-2 Chainsaw Handle cover
Plastic handle cover molding 69140a, 69140-a In good used shape Fits Homelite XL-2
Homelite XL-2 Chainsaw Handlebar 69133-1 NEW (HOS-E)
Metal top handle 691331 NEW Fits Homelite XL2
homelite xl-2 chainsaw ignition coil and points kit
Part: ignition coil with points Condition: tested and in good used/working order Fits: Homelite XL 2
homelite xl-2 chainsaw oil cap
Part: oil cap Condition: good used/working shape Fits: Homelite XL 2, XL2
homelite xl-2 chainsaw oil tank 69280 new (HARD)
Part: oil tank Part number: 69280 Condition: New old stock from closed out dealer. Dusty from years of storage. Fits: Homelite XL 2, XL2
homelite xl-2 chainsaw oil tank with cap
Part: oil tank and cap 69280 Condition: good used/working shape. This is the style with the flat top cap. Fits: Homelite XL 2, XL2
homelite xl-2 chainsaw points and condenser
Part: points with condenser Condition: good used/working shape Fits: Homelite XL 2
homelite xl-2 chainsaw rear handle cover with throttle trigger kit
Part: rear handle cover with throttle lever, rod and spring, front and rear trigger Condition: good used/working order Fits: Homelite XL 2 and some other models
homelite xl-2 chainsaw throttle trigger kit
Part: throttle lever, front and rear trigger, rod and spring Condition: good used/working order Fits: Homelite XL 2
Homelite XL-2 XL2 Chainsaw Filter Retainer Mount & Screws
Part: filter retainer mount and screws Condition: good used/working shape Fits: Homelite XL-2
Homelite XL-2 XL2 Chainsaw Flywheel Key
Part: Flywheel woodruff key 69250 Condition: good used/working shape Fits: Homelite XL-2, Super 2, XL and many others.
Homelite XL-2 XL2 Chainsaw Ignition Off Switch
Part: ignition off switch Condition: good used/working shape Fits: Homelite XL-2
Homelite XL-2 XL2 Chainsaw Muffler Cover Front
Part: muffler cover Condition: good used/working shape Fits: Homelite XL-2
Homelite XL-2 XL2 Chainsaw Piston, Cylinder, Crankshaft, Crank rod
Part: piston and cylinder with the crankshaft, rod, ring Condition: good used/working shape-has good compression, is not scored-top fin has a large chip in it as visible in picture Fits: Homelite XL-2
(1 in stock)
Homelite XL-2 XL2 Chainsaw Rear Handle Engine Case Housing
Part: rear handle/housing Condition: good used/working shape-has some paint loss, scuffing, minor pitting/chipping of the metal Fits: Homelite XL-2
Homelite XL-2 XL2 Chainsaw Reed Valve Assembly
Part: reed valve Condition: good used/working shape Fits: Homelite XL-2
homelite xl-400 chainsaw clutch cover
Part: drivecase clutch cover Part #58750-2 Condition: good used/working order Fits: Homelite XL 400
homelite xl-400 chainsaw rear trigger handle assembly
Part: rear trigger handle housing with throttle trigger, oil button, throttle link, throttle latch button Condition: good used/working order Location: Homelite XL 400
homelite xl-400 chainsaw top handle bar
Part: top wrap handlebar (a-63909-4) with clamp (63291-a) Condition: good used/working shape Fits: homelite xl400 / xl 400
homelite xl-500 chainsaw air filter cover
Part: air filter cover, part # 58773 Condition: good used/working shape Fits: Homelite XL 500
(1 in stock)
Homelite XL-700 Chainsaw Crankshaft 59625-1 NEW (HOS-E)
Crankshaft 596251 NEW Fits Homelite XL700 XL800 XL901, XL-800 and others
homelite xl-700 chainsaw cylinder with 2" bore
Part: cylinder with 2" bore Part # 63012 Condition: usable used condition Fits: Homelite XL 700 800
homelite XL-700 chainsaw outer starter spring shield 63565
Part: starter rewind shield, part # 63565 Condition: good used/working shape Fits: homelite XL-700 XL-800 XL 700 800 XL-925
(1 in stock)
homelite xl-700, xl-800 chainsaw muffler exhaust deflector shield
Part: deflector shield Condition: good used/working shape Fits: Homelite XL 700, XL 800
Homelite XL-76 Chainsaw Drivecase Cover Assembly
Clutch cover, with chain tensioner In good used shape Fits Homelite XL76 and others.
homelite xl-76 chainsaw guide bar plate set
Part: set of inner and outer bar plates with spring holder Condition: have some wear, in good used/working order Fits: Homelite XL 76
Homelite XL-76 Chainsaw Muffler Assembly
Muffler assembly with baffle and bolts In good used shape Fits homelite XL 76, XL-123, and others