(2 in stock)
Stihl 019T 019 T Chainsaw Bar/Chain Tensioner Adjuster
Part Name: chain tensioner in good used shape Fits the Following Models: Stihl 019 T part # 1120 664 1500 1123 664 1605 1123 664 2205
Stihl 018, 017, ms170, ms180 Oil Tank
Part Name: oil tank. Part # 1130 350 4400 Condition: good used/working shape Fits the Following Models:Stihl 018, 017, ms 170, ms 180
(3 in stock)
Stihl 009, 010, 011 AV AVT Hand Guard 1120 792 9100 #1
Black plastic brake handle. In nice shape, not cracked or broken. Fits 009 010 011 stihl saws-part number: 1120 792 9100.
(3 in stock)
Stihl 041av Chainsaw Muffler 1110-140-0613 (misc1b)
Muffler 1110 140 0613 new after market Stihl 041 FB, Old model 041 AV etc.
Stihl 015 AV, L Chainsaw short block
Part: front housing handle, case, piston, cylinder, crankshaft, muff Condition: Avoid the loose connecting rod bearings nightmare! 130psi compression, crank bearings and seals look intact. Has lateral crank motion, they're like that Fits: Stihl 015 AV, L 1116 641 1000, 1116 020 2105
stihl 009L chainsaw starter recoil cover and pulley assembly #1
Part: starter fan housing cover with handle cover, throttle link, trigger, safety interlock, switch, pulley, rewind spring, grip. Does not include throttle lock. Condition: good used/working order. May vary in color white or orange Fits: Stihl 009 L, 009L
stihl 031 av chainsaw piston and cylinder set #1
Part: 44mm bore top end kit includes: piston and cylinder with rings, pin, bearing and keepers. 1113 020 1201, 11130201201 Condition: good used/working shape. Fits: stihl 031 av, 031av 030av 030
stihl 031av chainsaw ignition coil for points and condenser
Part: bosch ignition coil module for condenser and points type igintions. Condition: tested and in good used/working order. Unfortunately the condenser was damaged during the tear of the saw. You can purchase an electronic conversion kit from us using this link. If you need help with the conve...
stihl 038 av chainsaw top cover shroud new OEM 1119 084 0901 (SAW)
Part: top cover engine shroud Part # 1119-084-0901 11190840901 Condition: New old stock from closed out dealer. Has some scratches and is a bit dirty from years of storage. Fits: stihl 038 av, 038AV electronic
stihl ts 400 cut off saw Starter Assembly 4223-190-0401 new OEM (SAG)
New old stock starter assembly with grip, pulley, pawl and rope. Has some scratches and is a bit dusty from years of storage. Part # 42231900401 4223 190 0401 Fits some models of TS400 concrete saws
Stihl MS461 Chainsaw Head Cylinder Torx Bolt set of 4 9022 341 1370
Stihl MS 461 head bolt set of 4 Part #: 90223411370/9022-341-1370 good used shape
Stihl S-10 Tillotson HS62A Carburetor
Tillotson HS 62 A Carb Fits Stihl Chainsaw S10 S 10 In good physical shape, may or may not need fresh gaskets and diaphragms installed.
stihl 044 chainsaw case bolt set of 5
Part: set of 5 case bolts / spine screw Part # 9022 371 1020 Condition: good used/working order Fits: Stihl 044 and some other models
stihl 034, 036 av chainsaw hand guard brake handle #2
Part: hand guard. 1125 792 9100 Condition: good used/working shape. Some dings and scuffs. A bit grungy. Fits: Stihl MS360, 034av, 036av, 034 036 av Super Pro
Stihl MS362 Chainsaw Clutch sprocket drum
Clutch sprocket drum and new 3/8-7 tooth rim sprocket 1147 160 2900 In good used shape. Fits Stihl MS-362 MS 362
stihl 036 chainsaw clutch cover washer 1128 162 1000
Part: clutch cover washer Condition: good used shape Fits: Stihl 044 av 046 036 ms440 ms460
Stihl 034 Chainsaw Fuel Tank Assembly #3
Gas tank trigger handle housing assembly. 1125 351 0505 In good used shape. Has a crack - see photos. Fits Older Model 036av, 034av, 034 036 av
Copy of Stihl 015, 020 Chainsaw Sprocket Bearing used 9512 003 2240
Stihl 015, 020 sprocket bearing Part #: 95120032240/9512-003-2240 good used part
stihl 034 chainsaw ignition short circuit wire 1125 440 1100 new (ST-6)
Part: short circuit wire part number 1125-440-1100 11254401100 Codnition: new old stock from closed out dealer. Fits: Stihl 034 036 MS360 MS 360 036 Pro
stihl 011 av chainsaw roller bearing set of 12 for the connecting rod new OEM (ST6)
Part: connecting rod roller bearings 0000 987 1011 Condition: new old stock from closed out dealer. Fits: stihl 011 av 009 010 012
Stihl 034, 024, 026 Chainsaw tank vent new oem 1121 350 5800 (ST8)
Part: fuel tank vent. part # 1121 350 5800 Condition: new old stock from closed out dealer. Fits: Stihl 034, 024, 026, 036 AV
stihl 044 av, ms 440, 046 av chainsaw small buffer plug 1122 791 7301 new oem (st8)
Part: (1) buffer plug 11227917301 Condition: new old stock from closed out dealer. Fits: Stihl 044 av and MS440, 046 av, MS460 066 064
stihl 024 chainsaw air filter cover and knob #2
Part: air cleaner cover with knob Part # 1121 141 1000 Condition: good used/working order, small crack as seen in photo Fits: Stihl 024 av
Stihl MS 461 chainsaw flange 1128 021 8100
Flange part number 11280218100 Good used shape Fits MS461 MS-461
stihl ms 461 chainsaw muffler assembly with gasket and shield
Part: muffler with the gasket and exhaust shield Condition: good used/working shape Fits: Stihl MS461
Stihl MS362 Chainsaw Complete Oil Pump
oiler oil pump 1135 647 0460 In good used shape Fits Stihl MS-362
Stihl MS362 Chainsaw Starter Pulley
Starter recoil rewind rope spool pulley 1128 195 4000 In good used shape Fits Stihl MS-362 MS 362
Stihl 034 Zama C3A-S19 carburetor rebuilt
Fully adjustable Zama C3A S19 carburetor Rebuilt used carb. May require final adjustments on chainsaw. Stihl 034
Stihl MS362 Chainsaw Carburetor Assembly Zama C1Q-S235
Zama C1Q S235 carb assembly 1140 120 0604 In good used shape Fits Stihl MS-362 m-tronic
Stihl 044 AV, 046 av, ms440, ms460 Chainsaw Annular Buffer Mount Set #2
Part: annular buffer mount set with all in photo Condition: Good used/working shape Fits: Stihl 044 AV, 046 av, ms 440, ms 460
stihl 044 av chainsaw air filter cover and nut #3
Part: air filter cover and nut. may vary in cosmetic design. PN 1128 141 0500 Condition: good used/working shape. Plastic is scratched and has a crack. Fits: Stihl 044 av
stihl 024, 026 av chainsaw brake tension spring new 1121 160 5501 (ST-6)
Part: brake spring for the chainbrake, part # 11211605501 Condition: new old stock from closed out dealer. Fits: stihl 024, 026 av
Stihl MS201T chainsaw Self-Tapping Screw P6x19 9074 478 4425 NEW (ST-6)
NEW OEM from old dealer stock - Self-Tapping Screw P6x19 Fits many Stihl trimmers as well as ms201T such as: HS 82 R, HS 82 RC, HS 82 T, HS 87 R, HS 87 T, 038, SR 200, SR 320, SR 400, SR 340, SR 420, SR 440, SR 5600, BG-KM, TS 350 AVE, TS 360, TS 410, TS 420, TS 440, TS 480i, TS 500i, BG 45, BG ...
(2 in stock)
stihl 066, 064, ms660, ms640 chainsaw clutch retainer new 1122 162 3005 (st-6)
Part: (1) clutch retainer Part # 11221623005 1122-162-3005 Condition: new, old stock from closed out dealer Fits: Stihl 066, 064, ms 640, ms 660
stihl 034, 036 av chainsaw choke link 1125 185 2001 (St-6)
PART: choke link rod 1125 185 2001 CONDITION: new old stock from closed out dealer. Fits: Stihl 034, 036 av, 036 pro, ms360
(1 in stock)
stihl 031 av chainsaw top front av buffer mount 1113 790 9901 new (st-202)
Part: av annular buffer mount for the top front 1113-790-9901 11137909901 Condition: New old stock from closed out dealer. Fits: Stihl 031av 032av
(2 in stock)
Stihl 084 chainsaw self tapping screw M3x8 9039 488 0340 new (S-8)
Self tapping screw for bar plates 9039-488-0340 90394880340 New old stock from closed out dealer. Fits 084 saws
stihl 044 av, ms 440 chainsaw pulley spring clip 1128 195 3500 new (s-11)
Part: starter pulley spring clip 11281953500 Condition: New old stock from closed out dealer Fits: Stihl 044 av and MS440
Stihl 031 chainsaw lot of assorted hardware
Lot of assorted hardware. Includes all in photo. Good used shape. Fits 031
Stihl 026 Chainsaw Oil Gear Bushing
Oil seal gear bushing ring and washer. 0000 993 0508 0000 958 1234 In good used shape Fits Stihl 026 024 MS240 MS 240 MS260 M S260
Stihl 066 chainsaw cylinder screw new 9022 371 1350 (S-9)
cylinder head bolt spine screw m6x25 part number 9022-371-1350 90223711350 New old stock from closed out dealer. May have some slight surface rust from years of storage. fits 066 ms660 ms 660
(1 in stock)
Stihl chainsaw Throttle Trigger Spring 1117 182 4500 NEW (S-18)
Throttle trigger and safety torsion spring. 11171824500 New old stock from closed out dealer. May have some slight surface rust/oxidation from years of storage. Fits Many models of Stihl Chainsaw 017 018 021 023 025 024 026 028 029 039 034 036 044 046, MS180, MS170, MS210, MS230, MS250, M...
Stihl 028AV - MS380 Chainsaw Upper Tank Mount 1118 790 9930 (S-25)
Upper gas fuel tank handle rubber AV buffer mount. 1118 790 9930 new old stock from closed out dealer. Fits: Stihl 028 038 028av 038av 028wb AV Super Magnum WB Woodboss
Stihl RE 360 K Pressure Washer O-Ring New 9645 945 1170 (st 205)
Stihl o ring. Part #: 96459451170 9645-945-1170 New old stock part from closed out dealer. Fits RE 360 K Pressure washer and others
stihl ms460 chainsaw muffler #2
Part: muffler 1128 140 0603, 1128 145 0803 Condition: good used/working order, has some rust and dents Fits: stihl ms 460, 046 AV Magnum
Stihl 031, 032 AV Chainsaw Oiler drive washer with pin 1113 030 7500 new (s-18)
Part Name: oiler pin drive washer/cover with pin. 1113-030-7500 11130307500 Condition Description: new old stock from closed out dealer Fits the Following Models: Stihl 031, 032 AV, 031av 032av
stihl 010, 011, 012 chainsaw muffler gasket new 1120 149 0600 (S27)
Part: muffler gasket 11201490600 1120-149-0600 Condition: new old stock from closed out dealer. Fits: Stihl 010, 011, 012 AV AVT 010av 011av 011avt 012av 012avt
Stihl 010 Chainsaw flat spring 1120 182 4700 NEW SD5
NEW OEM from old dealer stock - flat trigger throttle spring - Fits Stihl: 010 011 av
Stihl 031AV Chainsaw Rubber Rear Trigger Handle Mount 1113 790 9910 NEW (ST-202)
Lower rear trigger handle frame rubber AV buffer mount. 1113 790 9910 NEW old stock from closed out dealer Fits Stihl 031 032 AV 031av 032av
Stihl 032av Chainsaw Chainbrake cam 1113 160 5100 new (st-202)
Chain brake cam New old stock from closed out dealer. Dusty/dirty from years of storage. Part number 1113-160-5100 11131605100 Fits Stihl 031 032 AV
stihl fs90 trimmer diaphragm 4117 121 4700 new (st-204a)
New old stock gasket diaphragm Part # 4117-121-4700 41171214700 Fits Stihl trimmer brushcutter brush cutter models FS 90 AV
stihl fs90 trimmer lot of assorted parts new (st-204a)
New old stock from closed out dealer. Includes carburetor gaskets spring and all in photo. Fits Stihl trimmer brushcutter brush cutter models FS 90 AV
stihl fs90 trimmer pump diaphragm 4117-121-4800 new (st-204a)
New old stock pump diaphragm Part # 4117 121 4800 41171214800 Fits Stihl trimmer brushcutter brush cutter models FS 90 AV
stihl fs90, fs96 trimmer cylinder gasket 4117 029 2300 new (st-204a)
New old stock cylinder gasket Part # 4117-029-2300 41170292300 Fits Stihl trimmer models FS 90 AV, FS 96
stihl ms 441 chainsaw fuel hose kit 1138 350 2704 new (st-204a)
Part: fuel hose kit Part number: 11383502704 1138-350-2704 Condition: new old stock from closed out dealer. Fits: Stihl MS441
Stihl 028 chainsaw air filter cover #2
Part: air filter cover. PN 1118 141 1001 Condition: good used/working shape. Has a crack. Fits: Stihl 028WB 028 Woodboss, 028av av
Stihl MS500i chainsaw lot of assorted hardware used
Lot of assorted hardware. Includes all in photo. Good used shape. Fits MS 500 i MS500i MS261 MS261C MS 261
Stihl MS500i chainsaw brake bolt 1141 790 6100 used
brake chainbrake bolt 11417906100 Good used shape. Fits MS 500 i MS500i MS261 MS261C MS 261
Stihl MS500i chainsaw cover 1147 435 2700 used
cover 11474352700 Good used shape. Fits MS 500 i MS500i
Stihl MS500i chainsaw AV spring mount 1147 790 8303 used
AV spring mount 11477908303 Good used shape. Fits MS 500 i MS500i
(3 in stock)
Stihl FS90, 110, 130 Air Filter New 4180 120 1800 ( ZZZ )
Stihl FS90, 110, 130, HT101, 130, 131 FC100 FR130 FS100 FT100 FX130 HL100 HT100 KM100 SP90 air filter. Part #: 41801201800/4180-120-1800 New aftermarket part
Stihl MS500i chainsaw decompression valve used
Decompression valve Good used shape. Fits MS 500 i MS500i
Stihl MS500i chainsaw throttle trigger set used
Throttle trigger, spring, pin, throttle rod, and safety interlock set Good used shape. Fits MS 500 i MS500i
Stihl MS500i chainsaw bar plate used
Bar plate Good used shape. Fits MS 500 i MS500i
Stihl MS500i chainsaw muffler assembly used
Muffler body and cover for Stihl MS500i. Includes OEM muffler body and heat shield, and aftermarket muffler cover. Includes all in photos. Good used shape. Fits MS 500 i MS500i
Stihl MS500i chainsaw oil pump kit used
Oil pump with worm gear and line Good used shape. Fits MS 500 i MS500i MS 500i
Stihl MS500i chainsaw chain tensioner adjuster used
Chain tension adjusting assembly Good used shape. Fits MS 500 i MS500i
Stihl MS500i chainsaw clutch side crankcase half used
Crank case half clutch side with bar studs 1147 020 2960 c Good used shape. A few dings and scratches. Fits MS 500 i MS500i
Stihl MS500i chainsaw clutch assembly used
Clutch assembly. Includes sprocket drum, bearing, shoes, carrier, springs, washers, clip, and a new 3/8" 7 tooth rim sprocket Good used shape. Fits MS 500 i MS500i
Stihl MS500i chainsaw crankshaft used
crank shaft crankshaft 1147/04 Good used shape. Fits MS 500 i MS500i
Stihl MS500i chainsaw cylinder and piston kit used
Piston and cylinder kit. Includes cylinder, piston, rings, wrist pin, clips, bearing and bolts. Good used shape. Cylinder has a few broken fins. Fits MS 500 i MS500i
Stihl MS500i chainsaw flywheel used
Starter assembly with cover, dust shroud, pulley, spring and grip. 1147 404 1261 C 11474041261C Good used shape. Fits MS 500 i MS500i
Stihl MS500i chainsaw starter assembly used
Starter assembly with cover, dust shroud, pulley, spring and grip. 1147 760 1147 084 7800 1128 195 0400 Good used shape. Has a couple cracks, see photos. Fits MS 500 i MS500i
(2 in stock)
Stihl 064 Chainsaw Rubber Rear Tank Handle Mount 1122 790 9910 NEW (st-204b)
Right side rear trigger handle gas fuel tank rubber AV buffer mount. 1122 790 9910 1122 790 9912 NEW old stock from closed out dealer Fits Stihl 064
Stihl 066 Chainsaw Small Annular Buffer 1122 790 9905 NEW (st-204b)
Small, lower front, rubber AV buffer tank mount. 11227909905 NEW old stock from closed out dealer Fits Stihl 028 044 046 064 066 AV Magnum MS440 MS460 MS640 MS650 MS660
stihl ms210, ms230, ms250 chainsaw chain tensioner kit 1123 007 1004 new (S-14)
Part: chain tensioner adjuster spur gear and adjusting screw kit 11230071004 1123-007-1004 Condition: New old stock from closed out dealer. Fits: stihl ms 210, 230, 250
Stihl MS311 chainsaw 3/8" 7 tooth clutch spur sprocket drum
Part: 3/8" 7 tooth spur sprocket drum for the clutch with bearing Part # 1140/00 Condition: good used/working order. Some corrosion. Fits: Stihl MS 311 and others
Stihl 08s Chainsaw handle cylinder cover shroud
Top cover cylinder shroud. Stihl part number 1108 084 0900 In good used shape Fits Stihl 08-s, and some S-10, S10, and old TS-350 cut-off saws
stihl MS361 chainsaw wrist pin and bearing
Part: wrist pin and bearing 1135 034 1500 9512 003 2348 Condition: good used/working shape Fits: Stihl MS 361 chainsaws
stihl 044, ms440 chainsaw clutch cover #2
Part: clutch sprocket guard cover, part number 1125 648 0460 Condition: good used/working order. Has some stories to tell, but is still functional. See photos. Fits: stihl 044, ms 440
Stihl 028 Chainsaw Brake Lever 1118 162 5005
Stihl 028 brake lever Part #: 11181625005/1118-162-5005 New old stock part from closed out dealer.
stihl 044, 046 av chainsaw starter recoil cover and segment
Part:starter housing cover and dust cover segment. Does not include pulley. 1128 080 1812, 11280801812 Condition: good used/working shape. Fits:Stihl 044av, 046av Magnum, ms440, ms460
stihl 045 056 chainsaw pulley grip
Part: pulley grip handle Condition: good used/working shape Fits: Stihl 045 056
Stihl 038 AV Chainsaw Starter Recoil Cover Assembly #3
Part: complete starter recoil rewind assembly- with pulley, spring, plastic pawl, and wire track. 1119 080 1800 Fits the Following Models: Stihl 038 038AV 038 AV Super 038 Magnum Detailed Condition Description: In good used shape.
stihl 044, 046 av chainsaw starter recoil cover and pulley assembly #2
Part: starter housing cover with pulley and rewind spring 1128 080 2104 Condition: good used/working order. Has some corrosion. Fits: stihl 044, 046, MS440, MS460
Stihl 034 Chainsaw Clutch Side Crankcase Half 1125 020 2962
Crank case. Right side. 1125-020-2962 11250202962 In good used shape Fits some models of 034av 036av 036 034 av super
stihl 032 av chainsaw air filter cover #2
Part: air filter cover. PN 1113 141 1001. Condition: good used/working shape. Nut is a bit chewed up and it is stained with some scratches. Fits: Stihl 032av
Stihl 032 Chainsaw Chainbrake Assembly #2
band type chainbrake assembly. Includes clutch cover, spike, brake band, brake arm and internal parts/springs. In good used shape Fits Some models of Stihl 031 032 av, 031av, 032av
Stihl 044 Chainsaw Fuel Tank Handle Assembly #4
Rear fuel gas tank handle housing assembly. 1128 350 0832, 1128 791 10001128 351 0501, 1128 351 0500 Good used shape. Has been tested - no leaks. Faded/yellowed. Could use a good cleaning. Fits Stihl 044AV, 044 Magnum,
Stihl MS362 Chainsaw Starter Assembly #2
Complete starter recoil rewind assembly with pulley, spring, pawls, cover and all 1140 080 2103 In good used shape may or may not include id tag Fits Stihl MS-362
Stihl 034 Chainsaw Oil and Fuel Cap Set (late model)
Part: oil cap and fuel cap set Condition: good used/working condition. Oil cap keeper may not be intact. Part: Stihl 034, late model (newer) and others
Stihl 034 Zama C3A-S19 carburetor
Fully adjustable Zama C3A S19 carburetor good used, usable. May need a rebuild kit. Stihl 034
stihl 028 .325x7 spur sprocket complete clutch assembly #2
Part: .325 - 7T spur sprocket drum with gear, washers, bearing, mechanism (shoes, springs, carrier) Condition: good used/working Fits: Stihl 028 028wb
Stihl 044 Chainsaw Fuel Tank Handle Assembly #3
Rear fuel gas tank trigger handle housing assembly. Includes cap, trigger, safety interlock, and grip cover. Has switch for heated handles that has not been tested - continuity unknown. 1128 351 0504, 1128 351 0504 Good used shape. Has been tested - no leaks. Faded/yellowed. Fits Stihl 044AV...
Stihl MS261 Chainsaw Piston and Cylinder Set type 2
top end motor kit includes: cylinder head, piston, rings, clips, and wrist pin In good used shape Fits some Stihl MS261 MS261c MS261cm MS 261 c cm
Stihl MS362 Chainsaw M-tronic Ignition Coil
Mtronic ignition coil module 1140 4704 In good used shape Fits some Stihl MS-362 MS 362
stihl ms362 chainsaw top handle bolt set of 6
Part: set of 6 top handle bolts / screws Condition: good used/working order Fits: stihl ms 362
Stihl MS27 chainsaw stop buffer mount
Stihl stop buffer 1141/03 b Good used shape Fits Stihl MS 271 and others
Stihl MS271 chainsaw intake boot and ring
intake boot and ring clamp part number 1141 141 2201 11411412201 Good used shape Fits MS 271 MS 291 MS291