solo 639 chainsaw spur sprocket clutch assembly
Part: clutch assembly-includes the spur sprocket/drum, mechanism, bearing, washers, nut Condition: good used/working shape Fits: Solo 639
solo 639 chainsaw muffler assembly
Part: muffler assembly Condition: good used/working shape Fits: Solo 639
solo 639 chainsaw starter/recoil cover and pulley assembly
Part: starter cover with pulley and spring Condition: good used/working shape Fits: Solo 639
solo 639 chainsaw bar stud/bolt set
Part: set of bar studs Condition: good used/working shape Fits: Solo 639
solo 639 chainsaw intake manifold boot connector
Part: boot/hose connection Condition: good used/working shape Fits: Solo 639
solo 639 chainsaw flywheel
Part: flywheel Condition: good used/working shape-no broken fins Fits: Solo 639
Solo 639 Chainsaw Crankcase Tank Engine Chassis
Part: Crankcase tank engine chassis Condition: Good used/working shape Fits: Solo 639
Solo 640 Chainsaw Tillotson Carb Carburetor
Part: Tillotson carb Condition: Good physical used shape, may or may not need carb rebuild kit Fits: Solo 640
Solo 640 Chainsaw Handle Bar Bracket
Part: Handle bar bracket Condition: good used/working shape Fits: Solo 640
Solo 640 Chainsaw Air Filter Cover and Knob
Part: Air filter cover and knob Condition: good used/working shape Fits: Solo 640
Solo 640 Spur Drum Clutch Assembly
Part: Spur drum clutch assembly. Includes: Drum, mechanism, and bearing. Condition: good used/working shape Fits: Solo 640
Solo 640 Chainsaw Bar Chain Tensioner Adjuster
Part: Bar chain tensioner adjuster Condition: good used/working shape Fits: Solo
Solo 640 Chainsaw Gas / Fuel Cap
Part: gas/fuel cap Condition: Good used/working condition Fits: Solo 640
Solo 640 Chainsaw Piston and Cylinder Assembly
Part: piston and cylinder. Includes rings, pin, bearing and keepers Condition: Good used/working condition with no breaks-came off a saw with good compression Fits: Solo 640
Solo 640 Chainsaw Clutch side Cover
Part: clutch cover Condition: Good used/working condition Fits: Solo 640
Solo 640 Chainsaw Rear Trigger Handle Crankcase Right Half
Part: Rear trigger handle crankcase right half Condition: good used/working shape Fits: Solo 640
Solo 640 Chainsaw Shield Plate
Part: Shield plate Condition: good used/working shape Fits: Solo 640
Solo 644 Chainsaw Top Front Handle Bar
Part Name: top front handle barCondition Description: good used shape-not cracked or bentFits the Following Models: Solo 644
Solo 644 Chainsaw Top Cover Shroud
Part Name: top cover Condition Description: good used/working shape Fits the Following Models: Solo 644
Solo 644 Chainsaw Safety Lever
Part Name: safety leverFits the Following Models: Solo 644This is a USED part, in good working order.
Solo 644 Chainsaw Fuel Tank Vent Hose
Part Name: fuel tank vent hoseFollowing Models: Solo 644This is a USED part, in good working order.
Solo 644 Chainsaw Console Housing & Plug
Part Name: console housing and plugCondition Description: good used shape, has a few dingsFits the Following Models: Solo 644
Solo 644 Chainsaw Complete Starter cover and pulley assembly
Part Name: starter recoil housing cover with pulley assembly, rewind spring and pulley handle. Part #s 26 00 282 includes 20 73 642, 20 74 419, 26 00 283 + Condition: good used shape/working shape Fits the Following Models: Solo 644
Solo 644 Chainsaw Choke Lever
Part Name: choke leverFits the Following Models: Solo 644This is a USED part, in good working order.
Solo 644 Chainsaw Chain Guard/ Clutch Cover
Part Name: chain guard/clutch coverCondition Description: good used shape, no breaks-has some scuffing/dingsFits the Following Models: Solo 644
Solo 644 Chainsaw Air Filter Cover and Nut
Part Name: air filter cover and nutCondition Description: good used shape with no breaks, has some minor scuffingFits the Following Models: Solo 644
(2 in stock)
solo 675 chainsaw top wrap handle bar
Part: handlebar with bracket Condition: good used/working shape. Gripping may have some dings/gouges Fits: solo 675
(1 in stock)
solo 675 chainsaw fuel tank rear trigger handle
Part: fuel tank rear trigger handle housing, with cap, trigger and interlock, and all parts in photo. Condition: good used/working shape. Has a couple small cracks on bottom. Fits: solo 675
solo 675 chainsaw starter recoil cover and pulley assembly
Part Name: starter housing cover with pulley assembly, rewind spring and pulley handle. Condition: good used/working shape Fits the Following Models: Solo 675
(4 in stock)
solo 656 chainsaw circlip 0055104 new (solo box 1)
Part: circ clip washer Part # 00 55 104 Condition: new old stock OEM part. Fits: 639 / 645 / 650 DEKO, 639, 645, 651, 656 Location: Solo box 1
(1 in stock)
solo 656 chainsaw fuel filter pn 2700133 new (solo box 1)
Part: fuel filter pickup Part # 27 00 133 Condition: new old stock OEM part. Fits: 656 Location: Solo box 1
(4 in stock)
solo 662 chainsaw washer pn 0034201 new (solo box 1)
Part: circlip tension washer Part # 00 34 201 Condition: new old stock OEM part. Dirty/dust from years of storage Fits: 646 662 667 Location: Solo box 1
Homelite 290, 340 ,Solo 647 chainsaw handle av buffer mount isolator New (HM-159)
Part: av isolator mount for the handlebar, part # A-98426 Condition: good used/working shape Fits: Homelite 290, 340,Solo 647
homelite 290, 340 ,Solo 647 chainsaw handle av buffer mount isolator #3
Part: av isolator mount for the handlebar, part # A-98426 Condition: good used/working shape Fits: Homelite 290, 340,Solo 647
(1 in stock)
solo 634 chainsaw intake gasket
Part: intake gasket Condition: good used/working order Fits: Solo 634
(1 in stock)
solo 634, 641 chainsaw guide bar plate
Part: guide plate Part # 60 43 228/ 6043228 Condition: good used/working order Fits: Solo 641, 634
(1 in stock)
solo 634, 641 chainsaw muffler assembly
Part: muffler with bolts and gasket Part # 2500565/ 25 00 565, 20 43 272 / 2043272, 0012125 / 00 12 125 Condition: good used/working order Fits: Solo 641, 634
(1 in stock)
solo 634 chainsaw bracket with av buffer mount set and strap
Part: set of 2 av buffer mounts with bracket and strap Part # 63 00 188 / 6300188, 0098137 / 00 98 137 Condition: good used/working order Fits: Solo 634
(1 in stock)
solo 634, 641 chainsaw adjust plate
Part: adjust plate cover Part # 2074646 / 20 74 646 Condition: good used/working order Fits: Solo 641, 634
(2 in stock)
solo 634, 641 chainsaw rubber av buffer mount
Part: rubber av buffer mount (rubber metal connexion) Part # 63 00 188 / 6300188 Condition: good used/working order Fits: Solo 634, 641
(1 in stock)
solo 634, 641 chainsaw top handle bar with av buffer mount
Part: top front handlebar with rubber av mount Part # 63 00 138 / 6300138, 60 74 107 / 6074107 Condition: good used/working order Fits: Solo 634, 641
(1 in stock)
solo 634 chainsaw complete shortblock assembly - crankcase, cylinder, piston
Part: short block - piston, cylinder, crankshaft, crank case Condition: good used/working order. Came off a saw with good compression Fits: Solo 634
(1 in stock)
solo 634, 641 chainsaw chain tensioner adjuster
Part: chain tension screw / bolt with pin Part # 60 32 596 / 6032596, 00 18 241 / 0018241 Condition: good used/working order Fits: Solo 634, 641
(1 in stock)
solo 634, 641 chainsaw rear trigger handle assembly
Part: rear handle assy. - left and righ handle housing, throttle trigger, tie rod safety interlock lever, stop switch Part # 60 73 434, 60 73 548, 00 84 477, 60 74 640, 00 30 115, 20 36 259, 60 74 685 Condition: good used/working order Fits: Solo 634, 641
(1 in stock)
solo 634, 641 chainsaw housing shroud
Part: housing shroud cover Part # 61 00 345 / 6100345 Condition: good used/working order Fits: Solo 634, 641
(1 in stock)
solo 634, 641 chainsaw flywheel
Part: flywheel / fan wheel Part # 24 00 261 / 2400261 Condition: good used/working order Fits: Solo 634, 641
solo 660av chainsaw air filter cover with knob
Part: air filter/ cleaner cover and knob Condition: good used/working order Fits: Solo 660 av
(1 in stock)
solo 660av chainsaw rear handle bottom housing plate
Part: rear handle bottom plate Condition: good used/working order Fits: Solo 660 av
(1 in stock)
solo 660av chainsaw rear trigger handle kit
Part: rear handle housing with throttle trigger, safety interlock lever, throttle lock, link, idle speed screw and spring + Condition: good used/working order Fits: Solo 660 av
solo 660av chainsaw ignition coil kit
Part: ignition coil module with trigger unit Condition: tested and in good used/working order Fits: Solo 660 av
(1 in stock)
solo 647, 654 chainsaw intermediate plate
Part: intermediate plate Part # 21 00 418 Condition: good used/working order Fits: Solo 647, 654
(1 in stock)
solo 647 chainsaw top cover shroud
Part: top cover engine shroud Part # 61 00 264 Condition: good used/working order Fits: Solo 647
solo 651 chainsaw fuel line assembly
Part: fuel line assembly Condition: good used/working shape Fits: solo 651
(1 in stock)
solo 651 chainsaw tank vent assembly
Part: tank vent Condition: good used/working shape Fits: Solo 651
(1 in stock)
solo 651 chainsaw console base plate and plug
Part: console and plug Condition: good used/working shape Fits: Solo 651
(1 in stock)
solo 651 chainsaw guide bar plate
Part: bar plate Condition: good used/working shape Fits: Solo 651
solo 651 chainsaw starter recoil cover and pulley assembly
Part Name: starter housing cover with pulley assembly, rewind spring and pulley handle. Part #s 26 00 282 includes 20 73 642, 20 74 419, 26 00 283 + Condition: good used/working shape Fits the Following Models: Solo 651
(4 in stock)
solo chainsaw bolt pin part # 1104045 new (poulan bin 7)
Part: bolt pin Part # 11 04 045 Condition: new, old stock part. Dusty/dirty/may have minor oxidation from years of sitting in storage Fits: some Solo models Location: Poulan Box 7
(1 in stock)
solo chainsaw bolt part # 0010168 new (poulan box &)
Part: bolt Part # 00 10 168 Condition: new, old stock part. Dusty/dirty/may have minor oxidation from years of sitting in storage Fits: some Solo models Location: Poulan Box 7
(2 in stock)
solo chainsaw air filter pn 2500320 new (poulan box 7)
Part: air filter element Part # 25 00 320 Condition: new, old stock part. Dusty/dirty/may have minor oxidation from years of sitting in storage Fits: some solo models Location: Poulan Box 7
solo screw pn 0010110 new (solo box 1)
Part: screw Part # 00 10 110 Condition: new old stock OEM part. Dirty/dust from years of storage Location: Solo box 1
(1 in stock)
solo 410 blower sprayer rope guide pn 2012354 new (solo box 1)
Part: solo 410 blower (may also fit other models) rope guide Part # 20 12 354 Condition: new old stock OEM part. Dirty/dust from years of storage Location: Solo ...
(1 in stock)
solo washer pn 0031410 new (solo box 1)
Part: washer Part # 00 31 410 Condition: new old stock OEM part. Dirty/dust from years of storage Location: Solo box 1
solo 410 blower sprayer gasket pn 2061164 new (solo box 1)
Part: carburetor gasket Part # 20 61 164 Condition: new old stock OEM part. Dirty/dust from years of storage Location: Solo box 1
solo 410 blower sprayer gasket pn 4400160 new (solo box 1)
Part: gasket Part # 44 00 160 Condition: new old stock OEM part. Dirty/dust from years of storage Location: Solo box 1
(4 in stock)
solo av buffer mount pn 0094130 new (solo box 1)
Part: av buffer mount Part # 00 94 130 Condition: new old stock OEM part. Dirty/dust from years of storage Location: solo box 1
solo 410 blower sprayer tank cap pn 2700178 new (solo box 1)
Part: solo 410 blower (may also fit other models) tank cap Part # 27 00 178 Condition: new old stock OEM part. Dirty/dust from years of storage Location: solo box 1
(1 in stock)
solo 410 blower sprayer air filter cover pn 2073169 new (solo box 1)
Part: air filter cover Part # 20 73 169 Condition: new old stock OEM part. Dirty/dust from years of storage Location: solo box 1
(1 in stock)
solo 639 chainsaw piston and cylinder kit
Part: piston and cylinder kit – includes the pin, piston rings and keepers Condition: good used/working shape. Came off a saw with good compression. No broken fins. Fits: Solo 639
(1 in stock)
solo 639 chainsaw handle buffer mount
Part: buffer mount Condition: good used/working shape Fits: Solo 639
(1 in stock)
solo 639 chainsaw piston pin, bearing and keepers
Part: piston pin, bearing and keepers Condition: good used/working shape Fits: Solo 639
solo 639 chainsaw pressure plate lever
Part: pressure plate Condition: good used/working shape Fits: Solo 639
(1 in stock)
solo 639 chainsaw crank bearing gasket
Part: gasket-fits around the crank bearings Condition: good used/working shape Fits: Solo 639
(1 in stock)
solo 639 chainsaw carburetor nozzle guide
Part:carb grommet/guide Condition: good used/working shape Fits: Solo 639
solo 639 chainsaw intake manifold base
Part: manifold base Condition: good used/working shape Fits: Solo 639
(1 in stock)
Solo 640 Chainsaw Filter Mount
Part: Filter Mount Condition: good used/working shape Fits: Solo 640
(1 in stock)
Solo 640 Chainsaw Oil Line
Part: Oil Line Condition: good used/working shape Fits: Solo 640
(1 in stock)
Solo 640 Chainsaw Intake Manifold
Part: Intake manifold Condition: good used/working shape Fits: Solo 640
(1 in stock)
Solo 640 Chainsaw Trigger Handle Cover/grip
Part: trigger handle cover Condition: good used/working shape Fits: Solo 640
(1 in stock)
Solo 640 Chainsaw handle Bracket
Part: bracket Condition: Good used/working condition Fits: Solo 640
(1 in stock)
Solo 640 Chainsaw Top Handle bar
Part: Top Handle Condition: Good used/working shape-not cracked or bent Fits: Solo 640
Solo 640 Chainsaw Starter/recoil Cover Pulley Assembly
Part: Starter cover and pulley assembly Condition: good used/working shape-rope does not fully rewind Fits: Solo 640
Solo 640 Chainsaw Plug
Part: Plug Condition: good used/working shape Fits: Solo 640
(1 in stock)
Solo 644 Chainsaw Trigger Handle Left Half
Part Name: trigger handle left halfFits the Following Models: Solo 644This is a USED part, in good working order.
(1 in stock)
Solo 644 Chainsaw Rear Trigger Handle Fuel Tank
Part Name: bare bones rear trigger handle tankCondition Description: good used shape, no breaks or leaks-has some scuffingFits the Following Models: Solo 644
(1 in stock)
Solo 644 Chainsaw Pre Filter and Cover
Part Name: pre filter and coverFits the Following Models: Solo 644This is a USED part, in good working order.
(2 in stock)
Solo 644, 651 Chainsaw Intake Manifold & Bolts
Part Name: intake manifold and bolts. Black or white in color. Part # 23 00 732 Fits the Following Models: Solo 644, 651 This is a USED part, in good working order.
(1 in stock)
Solo 644 Chainsaw Guide Bar Plate
Part Name: guide bar plateFits the Following Models: Solo 644This is a USED part, in good working order.
(1 in stock)
Solo 644 Chainsaw Flywheel
Part Name: flywheelCondition Description: good used shape with no cracks or broken finsFits the Following Models: Solo 644
(1 in stock)
Solo 644 Chainsaw Chain Catcher/Protection Plate, Screw
Part Name: chain catcher and screwFits the Following Models: Solo 644This is a USED part, in good working order.
Solo 644, 651 Chainsaw AV Buffer Mount Element
Part Name: (1) av rubber metal buffer mount conn. Part # 63 00 155 Fits the Following Models: Solo 644, 651 This is a USED part, in good working order.
(1 in stock)
Solo 644 Chainsaw Air Guide/ Flywheel Cover Shroud
Part Name: flywheel coverFits the Following Models: Solo 644This is a USED part, in good working order.