Orders Over $150 Ship For Free Within The USA

Cart 0

Chainsawr

SEARCH FOR PARTS

Tips for better searches

Jonsered / Jonsered

Sort by

We specialize in older jonsered chainsaws. We can identify your old jonsered chainsaw if you don’t know what it is. Tons of parts for the older all metal constructed models of jonsered. 50 51 52 52E 49sp 521 621 70E 80 90. We also have used chainsaw parts for newer turbo models and models from the 1980’s like 520 sp and 510 sp.

Part: muffler and bracket Part # 503 70 92 01 Condition: good used/working shape Fits:some models of Jonsered 2051, 2054 turbo

View

Part: crank case chassis housing, left flywheel side. Bare bones, does not include bearing etc. Condition: good used/working shape Fits: Jonsered 910, 910e, 910ev

View

Part: .404" pitch x 7T spur sprocket drum for the clutch Herr Part # 263 b7 Condition: new Fits: some models of Jonsereds 820, 830, 910, 920, 920 super, 930 super

View

Part: wrist pin, bearing, clip set Part # 504 14 12-01, 504 41 20-15 Condition: good used/working order Fits: Jonsered 49 sp

View

Part: throttle cable boot / grommet guide Part # 503 18 55-01 Condition: good used/working order Fits: Jonsered 2051 and 2054 turbo

View

Part: lot of misc. hardware- bar nut set, bolts, screws, filter cover nut (includes everything pictured) Condition: good used/working order Fits: Jonsereds 90

View

Part Name: Lower left handle half for the rear handle. part # 504 65 58-04 Part Description: Good used/working shape Fits the Following Models: Jonsered 49 sp, 50, 51, 52, 52E

View

Piston w/ rings, wrist pin, and clips Jonsered part number : 506 15 55-04 New aftermarket part Fits Jonsered 2094

sale

View

Part: starter recoil cover only part #s 504 60 01-17 Condition: good used/working order Fits: Jonsereds 510 sp

View

Part: clutch cover with brake band spring and brake mechanism / arm for the chainbrake Condition: good used/working order Fits: early model (older) Jonsered 625, 630, 670 models

View

Part: hardware, sleeves for the chainbrake Part# 505 26 93-04, 505 26 92-75 + Condition: good used/working order Fits: Jonsered 930 super

View

Part: lot of misc. screws/ bolts, washers pictured Condition: good used/working order Fits: Jonsered 70 E

View

Part: small lot of misc. hardware- bearing, washer and screws pictured Condition: good used/working order Fits: came off a Jonsered 2045, should also fit 2041 and 2050

View

Part: av spring mount with screws Condition: good used/working order Fits: Jonsered CS 2137

View

Part: ignition wires Condition: good used/working order Fits: Jonsereds 920

View

Part: set of 4 bolts / screws for the starter cover Part # 725 53 28-55 Condition: good used/working order Fits: Jonsereds 49 sp, 50, 51, 52, 52e

View

Part: clutch sprocket cover with chain tensioner adjuster Part # 545 01 22-08, 530 06 96-11 Condition: good used/working order Fits: Jonsered CS 2138 C / 2138c

View

All 5 top handle screws. 503 21 88-16, 503 21 88-25, 503 21 88-25 In good used shape Fits Jonsered 2150, 2145, 2141, 2149 and others

View

Part: lot of misc. hardware- nuts, bolts, screws, wrist pin, bering, catcher (includes everything pictured) Condition: good used/working order Fits: Jonsereds 455 and some other models

View

Part: fine thread clutch mechanism rotor Condition: good used/working order Fits: some models of Jonsereds 625, 630, 670

View

Part: chain catcher Part # 506 05 56-01 Condition: good used/working order Fits: Jonsereds 490, 590

View

Part: cover for the brake Part # 530-038679 Condition: good used/working order Fits: jonsered 2137

View

Part: brake band with spring Condition: good used/working order Fits: Jonsered 2137

View

Part: starter housing cover and shroud Part # 503 12 38-02 Condition: good used/working order Fits: Jonsereds 455, 525, 535

View

Part: lot of misc. hardware- nuts, bolts/screws (includes everything pictured) Condition: good used/working order Fits: Jonsereds 920

View

Part: full wrap handlebar Condition: good used/working order Fits: Jonsereds 90

View

Part: set of 10 case bolts /screws Condition: good used/working order Fits: Jonsered 590

View

Part: parts for the tank vent Part # 506 05 53-01, 506 05 52-01 Condition: good used/working order Fits: Jonsered 590 490

View

Part: .325x8 spur sprocket drum with bearing, mechanism, washers Part # 504 52 00-06, 504 07 03-45, 504 23 34-05 Condition: good used/working order Fits: Jonsereds 510 sp, 520 sp

View

Part: crank shaft with rod Part # 503 11 21-01 Condition: good used/working order Fits: Jonsered 590

View

Part: (1) spring and (2) studs for the flywheel Condition: good used/working order Fits: Jonsered 525

View

Part: top wrap handlebar for heated handles with the handle bracket and av buffer mount Condition: good used/working order. Some of the rubber gripping is torn off/missing Fits: came off a Jonsered 52e, should also work on a 52, 49sp, 50, 51

View

Part: ignition off switch Part # 505 27 92-05, 503 20 37-01 Condition: good used/working order Fits: Jonsered 590, 490

View

Part: lot of misc. hardware - bolts, screws, catcher (includes everything pictured) Condition: good used/working order Fits: Jonsered cs 2245, 2245 s, 2250 s

View

Part: muffler with bolts Condition: good used/working order Fits: Jonsered 670

View

Part: clutch assembly - includes the spur sprocket drum, mechanism, and bearing Part # 537 11 05-03, 503 87 30-72 Condition: good used/working order Fits: Jonsered cs 2245, 2245 s, 2250 s

View

Part: C1M EL 37b carburetor Part # 506 45 04-01, 544 14 82-01 Condition: good used physical shape, may need a carb rebuild kit Fits: Jonsered cs 2245, 2245 s, 2250 s

View

Part: throttle cable Part # 504 09 88-01 Condition: good used/working order Fits: Jonsered cs 2245, 2245 s, 2250 s

View

Part: muffler with screws, exhaust gasket, shield plate Part # 544 14 77-02, 544 08 31-04, 544 08 44-01, 725 53 68-55 Condition: good used/working order Fits: Jonsered cs 2245, 2245 s, 2250 s

View

Part: set of 2 buckle clips for the top cover Part # 503 89 47-02 Condition: good used/working order Fits: Jonsered cs 2245, 2245 s, 2250 s

View

Part: flywheel rotor with pawl / spring /stud set Part # 544 11 18-01 Condition: good used/working order Fits: Jonsered cs 2245

View

Part: intake manifold boot with base and partition Part #s 544 08 23-01, 544 08 41-01, 544 08 38-01 Condition: good used/working order Fits: Jonsered cs 2245 and some other models

View

Part: crank case engine tank housing with bar stud / bolt set Condition: good used/working order Fits: Jonsered cs 2245

View

Part: piston and cylinder with crankshaft, crank rod Condition: good used/working order. Came off a saw with good compression, no breaks Fits: Jonsered CS 2245 and Husqvarna 445

View

Part: sprocket drum and 3/-8 rim for the clutch. Includes a new, replacement rim Condition: good used/working order Fits: Jonsereds 910e, 910ev

View

Part: starter rewind return spring and holder Part # 540 05 75-02 Condition: good used/working order Fits: Jonsered CS 2245

View

Part: flywheel cover / air conductor Part # 504 08 15-01 544 08 15 Condition: good used/working order Fits: Jonsered CS 2245

View

Part: top shroud cover Part # 503 30 03-01 Condition: good used/working order Fits: Jonsered CS 2245

View

Part: tank breather vent and line Condition: good used/working order Fits: Jonsered 450 and some other models

View

Part: starter housing cover with pulley and rewind spring Part # 537 00 98-01, 537 06 59-01, 537 0931-01 Condition: good used/working order Fits: Jonsered CS 2156C

View

Heated top handle, with wiring. Fits Jonsered V series 630, 625 and 670 heated handles All intact and in good used shape, but heater element is untested.

View

Part: idle screw with spring Condition: good used/working order Fits: Jonsered 920

View

Part: set of handle cover / fillers Condition: good used/working order Fits: some models of Jonsereds 2054 turbo

View

Part: throttle trigger Part # 503 55 07-01 Condition: good used/working order Fits: Jonsered 2051, 2054, 2055 turbo

View

Part: tillotson hs-257a recirculating carburetor with filter mount and bolts/screws Condition: good used physical shape, may need a carb rebuild kit Fits: some models of Jonsered 670 - there were a couple of slightly different hs carburetors used on this saw, so check to make sure yours...

View

Part: lot of misc. screws and bolts for Jonsereds 630 and 670 models Condition: good used/working order

View

Part: screen with screw Part # 503 87 55 01 and 503 21 70-01 Condition: good used/working shape Fits: Husqvarna 340, 345, 350 and jonsered 2150, 2145, 2141 turbo

View

Part: lot of misc. hardware - bolts, screws, bearing, race, guide (includes everything pictured) Condition: good used/working shape Fits: Jonsereds 49 sp, 50, 51, 52, 52e

View

Part: lot of misc. hardware / small parts - screws, bolts, gasket, wrist pin, bearing, clips, catcher (includes everything pictured) Condition: good used/working order Fits: Jonsered 630, 670

View

Part: av spring mount for the cylinder PaCondition: good used/working order Fits: Jonsered 2071, 2065 turbo

View

Part: throttle rod link Condition: good used/working order Fits: Jonsered 370

View

Part: molded fuel line hose Condition: good used/working order Fits: Jonsered 630, 670

View

Part: crank shaft with connecting rod Part # 504 40 00-07 Condition: good used/working order Fits: Jonsereds 910

View

Part: terminal boot for the ignition coil Part# 504 12 28-02 Condition: good used/working order Fits: Jonsereds 70 E

View

Part: (1) clutch shoe Part # 504 54 40-01 Condition: good used / working order Fits: Jonsereds 49 sp, 50, 51, 52, 52e, 521ev

View

Clutch washer. 504184401 New part from old dealer stock Fits: Jonsereds 49 sp, 50, 51, 52, 52e, 521ev

View

Part: inner bearing / race for the clutch drum Part # 504521902 Fits: Jonsereds 49 sp, 50, 51, 52, 52e, 521ev

View

Part: intake manifold insulator spacer wtih gasket, bolts and insulator Condition: good used/working order Fits: some models of Jonsered 670, which do not have boot type intakes

View

Part: lot of misc. hardware - screws / bolts Condition: good used/working shape Fits: Jonsered 670

View

Part: choke rod pull Part # 503 64 68-01 Condition: good used/working shape Fits: Jonsered 2095 turbo

View

Part: bolts /screw set, heat shield (503 51 99-01), nuts and exhaust gasket for the muffler Condition: good used/working shape Fits: Jonsered 670

View

Part: fuel tank vent and line Part # 503 16 40-01 Condition: good used/working shape Fits: Jonsered 2095 turbo

View

Part: wrist pin and bearing for the piston Condition: good used/working shape Fits: Jonsered 2054 turbo

View

Part: lot of misc. hardware- screws Condition: good used/working shape Fits: Jonsered 920, 930

View

Part: small lot of hardware-includes screws and nuts pictured Condition: good used/working shape Fits: Jonsered 490, 590

View

Part: lot of misc. hardware - screws/bolts (includes everything pictured) Condition: good used/working shape Fits: Jonsered 2150 turbo

View

Part: throttle rod link and hardware pictured Part # 504 84 14-01504 38 67-00 + Condition: good used/working shape Fits: Jonsered 49 sp, 50, 51, 52, 52e

View

Part: muffler for saws with heated handles with bracket support Part # 505 35 04-72 (bracket) Condition: good used/working order Fits: Jonsereds 490 and 590

View

Part: av buffer mount for the rear handle Part # 504 12 50 16 Condition: good used/working shape Fits: Jonsereds m80 and 90

View

Part: brake band with knee joint lever Part # 506 08 31-01 and 501 87 53-01 Condition: good used/working order Fits: Jonsered 2054 and 2055 turbo

View

Part: right side of bottom casting for the rear handle Part # 504 65 57-04 Condition: good used/working order Fits: Jonsereds 80, 90

View

Part: filter housing base Part # 503 92 79-04 Condition: good used/working shape Fits: Jonsered cs 2156 turbo, 2159

View

Part: handle hardware part Part # 505 27 92 11 Condition: good used/working shape Fits: Jonsered 490, 590

View

Part: lot of misc. hardware - screws, bolts, nuts, washers (includes everything pictured) Condition: good used/working shape Fits: Jonsered 490, 590

View

Part: set of bar bolts / studs Part # 505 22 09-37 Condition: good used/working shape Fits: Jonsered 490, 590, 510 sp, 450, 535

View

Part: crank shaft and connecting rod Part # 503 11 21-01 Condition: good used/working shape Fits: Jonsered 490

View

Part: piston only, no ring etc. Condition: good used/working shape Fits: Husqvarna 362 special and Jonsered 2063 turbo

View

Part: lot of misc. hardware- includes 2 brake bolts (503 89 30-03), nut, washers, and screws and bolts (includes everything pictured) Condition: good used/working shape Fits: Jonsered cs2156, cs2159 turbo

View

Part: fuel / gas tank filler cap Condition: good used/working shape Fits: Jonsered cs 2156 turbo

View

Part: switch wires harness Part # 503 89 87-01 Condition: good used/working shape Fits: Jonsered cs2156, cs2159 turbo

View

Part: 3/8-7 clutch sprocket drum and rim Condition: good used/working shape Fits: Jonsered cs2156, cs2159 turbo

View

Part: muffler with spark arrestor screen Part # 503 86 28-03 Condition: good used/working shape. Has a minor ding on side of muffler. Fits: Jonsered CS 2141, 2150

View

Part: switch bracket Part # 503 74 81-01 Condition: good used/working shape Fits: Jonsered 2041, 2045, 2050 turbo

View

Part: set of 4 cylinder / head bolts. Part # 725 53 45-55 Condition: good used/working shape Fits: Jonsereds 455, 535 and others

View

Part: H bushing for the brake handle guard. Part # 503 23 45-02, 503 43 61-01 Condition: good used/working shape Fits: Jonsered 2083, 2077 turbo

View

Part: wrist pin bearing Condition: good used/working shape Fits: Jonsered 2159 turbo

View

Part: clutch carrier rotor Part # 504 54 30-04 Condition: good used/working shape Fits: Jonsered 910

View

Part: handle support brace plate Part # 504 73 00-35 Condition: good used/working shape Fits: Jonsered 910

View

Part: clutch sprocket drum with bearing, washer and includes a new 3/8-8 replaceable rim Condition: good used/working shape Fits: Jonsered 910

View

← 1 … 13 14 15 16 17 … 22 →