Orders Over $150 Ship For Free Within The USA

Cart 0

Chainsawr

SEARCH FOR PARTS

Tips for better searches

Husqvarna

Sort by

Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.

Part: Ignition coil only Condition: good used shape-tested and works Fits: Husqvarna 246

View

For Partner ModelsPart Number: 502 03 47-01Part Description: muffler gasketFits the Following Models: Partner B440 trimmer, Husqvarna 36R, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: box 35

View

Part Name: – Top handle bar 503 20 00-01 Condition: – In good used/working order Fits the Following Models: – Husqvarna Practica 40. And some other older models like 140s, 240, 238 etc.

View

Part Name: points ignition coil Part Description: nice used shape-tested for spark and works Fits the Following Models: Husqvarna Practica 40

View

Part Name: – Flywheel assemblyPart Description: – No cracks or chips. Pawls work good.Fits the Following Models: – Husqvarna Practica 40. And some other older models like 140s, 240, etc.

View

Part Name: – Complete starter recoil cover, with all internal partsPart Description: – In good working order, nice shape, some tiny cracks in the orange plastic cover around the area of the grills.Fits the Following Models: – Husqvarna Practica 40. And some other older models like 140s, 240, etc.

View

Part Name: – Complete oil pump assemblyPart Description: – In good working orderFits the Following Models: – Husqvarna Practica 40. And some other older models like 140s, 240, etc.

View

Part Name: Husqvarna Chainsaw Trigger Handle HeaterPart Description: switches, wires and trigger handle heating elementsDetailed Condition Description: in good working orderFits the Following Models: fits many older SG models of Husqvarna ChainsawsThis is a USED part, in good working order.

View

Part Name: oil pump drive gear, shaft-everything seen in picture Condition: good used/working shape Fits: Husqvarna 61 266 268 272

View

Throttle Cable In good used/working shape Fits: Husqvarna 575 570 Chainsaw

View

Part: fuel and oil cap set Condition: good used/working shape Fits: Husqvarna 50 Rancher

View

Part: bar nut set Condition: good used/working shape Fits: Husqvarna 50 Rancher

View

Bearing, keepers and pin for the piston Good used shape Fits Husqvarna 50 Chainsaw

View

Part: set of 3 av spring mounts Part # 503 92 31-01, 503 85 41-01, 537 30 46-01 Condition: good used/working shape Fits: Husqvarna 455 rancher

View

Part: bucking spike Part # 503 97 38-01 Condition: good used/working shape Fits: Husqvarna 455 rancher

View

Part Name: Starter Recoil Cover Only – No internal parts Condition: usable shape/has several cracks Fits: Husqvarna 44 chainsaws

View

Part: starter recoil housing cover with pulley, rewind spring and grip Condition: minor break on left upper corner and some havey grime. Fits the Following Models: Husqvarna 42 Special Part # 501 79 43-02, 501 79 44-01, 501 63 02-01, 503 54 39-01

View

Part: pre air filter and cover Part # 501 62 81-02 and 501 62 95-01 Condition: good used/working shape Fits: Husqvarna 42 Special

View

Part Name: oil pump wih pickup line hose Condition: in good used/working shape. Has some minor oxidation Fits the Following Models: Husqvarna 42 Special

View

Part Name: gas and oil cap setCondition Description: in good used shape-not cracked/dont’ leak-fadedFits the Following Models: Husqvarna 42 SpecialThis is a USED part, in good working order.

View

Part Name: air filter-black or white in color Condition Description: in good used/working shape Fits the Following Models: Husqvarna 41, 36

View

Part Name: husqvarna 40 Chainsaw Tank VentPart Description: tank ventDetailed Condition Description: nice used shapeFits the Following Models: 40This is a USED part, in good working order.

View

Part Name: Inner Bar Plate Detailed Condition Description: good used shape Fits the Following Models: Husqvarna 40 45 This is a USED part, in good working order.

View

Part: flywheel and starter pawls. Part number 506 02 61-06 Condition: good used/working shape Fits: Husqvarna 40, 45 models with woodruff keyed flywheels

View

Part Name: Clutch Mechansim. Part number 503 17 31-01 Detailed Condition Description: nice used condition Fits the Following Models: Husqvarna 40 45 49 This is a USED part, in good working order.

View

Part Name: set of bar studs with plate. Part #s 506 01 31-01 and 506 01 30-01 Condition Description: in good used/working shape Fits the Following Models: Husqvarna 40, 45

View

Part Name: av spring mount setDetailed Condition Description: good used conditionFits the Following Models: 40 45This is a USED part, in good working order.

View

Part: Throttle Trigger Condition: Good used shape. No breaks. Fits: Husqvarna 394, May also fix 395 XP.

View

Carburetor Housing Base. Part # 537 00 14-01 Good / working shape Fits: Husqvarna 385XP Chainsaw

View

Bucking Spike. Part # 537 01 71-01 Good used/working shape Fits: Husqvarna 385 XP Chainsaw

View

Part Name: set of flywheel starter pawls, springs and studsFits the Following Models: Husqvarna 36 41This is a USED part, in good working order.

View

Part Name: flywheel nutFits the Following Models: Husqvarna 36 41This is a USED part, in good working order.

View

Part Name: cover and screwFits the Following Models: Husqvarna 36 41This is a USED part, in good working order.

View

Part Name: wrist pin and bearingFits the Following Models: Husqvarna 350This is a USED part, in good working order.

View

Part Name: inner guide bar plate Condition: good used/ working shape Fits the Following Models: husqvarna 350

View

Part Name: Fuel Line & FilterDetailed Condition Description:in nice used shape with no breaksFits the Following Models: 340This is a USED part, in good working order.

View

Part: brake spring, band and links 503 80 97-01 Condition: good used, working shape Fits: Husky 334, 335, 338, 335xpt, 338xpt

View

Complete clutch side cover. Includes the clutch cover with the chainbrake parts-brake band, spring handle, etc. 507 47 64-50, 507 476450 In good working order with no cracks or breaks, some scuffing/ paint worn off. Fits Husky 33 and others.

View

Set of caps-one oil and one fuel. In nice shape with no cracks or leaks. Fits Husky 33 .

View

Choke and throttle linkages. Good used shape, some minor surface rust. Fits Husky 33 .

View

Part Name: Bumper PlateDetailed Condition Description: good used shapeFits the Following Models: 288 XPThis is a USED part, in good working order.

View

Part:starter pawl, spring and stud set Condition: good used/working shape Fits: Husqvarna 281 Chainsaws

View

Part Name: fuel capPart Description: good used shape, no crackedFits the Following Models: Husqvarna 272 XPThis is a used part.

View

Part Name: Husqvarna 266 61 Stator for Heated HandlesPart Description: round part that mounts behind the flywheelDetailed Condition Description: good working orderFits the Following Models: 266 61 SGThis is a USED part, in good working order.

View

Part Name: carburetor bolt setPart Description: good used shapeFits the Following Models: Husqvarna 261 262 XPThis is a used part.

View

Part Name: brake band springCondition Description: good used shape with no breaksFits the Following Models: Husqvarna 261 262 XPThis is a USED part, in good working order.

View

Part Name: throttle trigger and safetyCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 257 XPThis is a USED part, in good working order.

View

Part Name: starter pawl, spring and hardware setCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 257 XPThis is a USED part, in good working order.

View

Part Name: starter pulleyCondition Description: in good used shape-no breaksFits the Following Models: Husqvarna 257 XPThis is a USED part, in good working order.

View

Part Name: muffler gasket Condition Description: in good used shape-no breaks Fits the Following Models: Husqvarna 257XP 257 This is a USED part, in good working order.

View

Part: Ignition off switch Condition: good used/working shape Fits: Husqvarna 254

View

Part Name: bar nut setPart Description: good used shapeFits the Following Models: 254 257 261 262This is a used part.

View

For Husqvarna ModelsPart Number: 501 91 09-02Part Description: studFits the Following Models: Husqvarna 24R 36R line trimmer, will also fit some Partner modlesDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Locati...

View

Part Name: fuel cap Condition: good used/working shape-no cracks Fits: Husqvarna 242 chainsaws

View

Part Number: 501 78 50-01Part Description: bossFits the Following Models: Husqvarna 22R 24R 25R, may also fit other modelsDetailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Location: Box 36 (Partner bin)

View

Part: muffler with bracket Condition: good usable shape-has some minor surface rust and denting-no breaks Fits: Husqvarna 181 Chainsaws

View

Part Name: choke rod Fits the Following Models: Husqvarna 181 This is a USED part, in good working order.

View

Part Name: Muffler assembly-includes bolts and bracket Detailed Condition Description: useable shape with no breaks, has surface rust and looks as though it was welded/repaired at one time Fits the Following Models: Husqvarna 154 This is a USED part, in good working order.

View

Part Name: rim drum clutch assembly-includes the drum, mechanism, washer, rim and bearing-.325 pitch Detailed Condition Description: nice used shape with no breaks Fits the Following Models: Husqvarna 154 254 se xp 254xp 254se 154se This is a USED part, in good working order.

View

Part Name: recoil spring Part Description: good used shape, no breaks Fits the Following Models: Husqvarna 154 254 This is a used part.

View

Part Name: zama carburetor C1Q-W29E, C1q-w29 e. 530071987, 530-071987, 530 07 19-87 Condition Description: in nice, used, physical condition-came off a running saw, may or may not need fresh gasket and diaphragm kit installed Fits the Following Models: Husqvarna 142, 137 530071987

View

Part Name: crankcase with the studsCondition Description: in good used shape-no breaks or leaks-some scuffingFits the Following Models: Husqvarna 142This is a USED part, in good working order.

View

Part: MARK 2 oem clutch sprocket cover with chain tensioner assembly and chain brake assembly, 505 19 90-05 Condition: good usable/working order. with scuffs and pitch because its a used chainsaw part Fits: Husqvarna 550xp mark 2, 550 xp II

View

Part: assorted hardware, as shown in picture Condition: used Fits: Husqvarna 480, 380 cd

View

Part: crank case engine housing assembly Condition: good used/working shape. crank bearings appear good, holes where spike attach are egged out 501 28 65-01 Fits: Husqvarna 380cd

View

Walbro WJ 115 WJ115 carb assembly. 501 35 51 01 new oem genuine carburetor Fits Husqvarna 395 xp 395XP

View

Part: oil pump oiler with gear 503 52 13-03 503 52 14 503 84 01-01 has correct outlet pipe for the 362, 2063 0nly Condition: good used/working order Fits: Husqvarna 362 Jonsered 2063

View

Bar oil reservoir cap. 537 28 15-02 new aftermarket Fits Husqvarna 353, 340, 345, 350, 350 EPA, 340 E, 346 XP, 345 E, 346 XP Jonsered: 2141 2145 2150 2149 2152 2153 2156 2159 Turbo. G5300 326P 4 SAW ATTACHMENT, 326P 5 X-SERIES, 325P5, 326P 5 X-SERIES SAW ATTACHMENT, SAW ATTACHMENT 2006-07,...

View

Part Name: Air Filter, part # 5018063 Detailed Condition Description: new old stock from closed out dealer. It a bit dusty/dirty from years of storage. Fits the Following Models: 61 266 268, late model, 266xp, 266se, 266 se sg xp

View

Part: starter pulley 501 40 24 5014024 Condition: new old stock from closed out dealer Fits: Husqvarna 65 L L65

View

Starter pulley part number 503876301 503 87 63 01 New old stock from closed out dealer. Fits Some models of 340 345 350. There were a couple of styles so check to make sure this is the correct one for your saw. A little dusty/dirty from years of storage. Up to 010604200 (340)Up to 010602850 (3...

View

Part: throttle trigger. Part # 503 81 32-01 Condition: new old stock from closed out dealer Fits: Husqvarna 335 and 338 xpt

View

Starter pulley, recoil rewind rope spool. 537 09 25-01 537 09 25-02 New OEM from closed out dealer. Fits Husqvarna 350 351 353 346xp 450 455 Rancher Jonsered 2150 2152 2153 2149 Turbo

View

Starter pulley rope spool pn# 501 79 44-01 new old stock from closed out dealer. Husqvarna 42, 242, 246

View

Starter pulley with spring Part number 503964901 New old stock from closed out dealer. Fits many Husqvarna trimmers brush cutters including 123L 223L 325RDX

View

Air filter Part number 505271001 New old stock from closed out dealer. Fits many Husqvarna trimmers brush cutters including 323RII 237RDX 327RJX

View

Part: felt/fleece air filter. Part # 537 01 09 03 537010903 Condition: NEW old stock from closed out dealer. Fits: Husqvarna 357XP, 359, 357 xp xpg, and Jonsered 2159 2156 Turbo

View

Part: heavy duty nylon mesh air filter Replaces Part # 503 81 80 02 503 81 80 06 Condition: new, OEM from closed out dealer. Fits: Husqvarna 371xp, 372xp, 365 Special, 362 365 371 372 XP saws with the tall HD air filter

View

Part: flocked air filter (537 20 75-01) Condition: new old stock from closed out dealer. Fits: Husqvarna 570, 575xp, 576xp, 575 576 xp

View

Part: hose line Part number: 537203701 537 20 37 01 Condition: NEW OEM, from closed out dealership Fits: Husqvarna 570, 575xp, 576xp

View

Choke link, choke pull. Part # 501 52 79-02 New old stock from closed out dealer. Fits Husqvarna 61, 162, 266, 268, 272 272xp 66 266xp 61 rancher practica 268xp Chainsaws

View

Part: throttle trigger, part # 503 82 98-01 503 82 96 Condition: New old stock from closed out dealer. Fits: Husqvarna 371, 372, 385 xp Jonsered 2171 2172

View

Choke lever pull. 537 20 52-01 new old stock from closed out dealer. May be dusty/dirty and have a few small scuffs from years of storage. Fits Husqvarna 570 575 575xp 576xp 576 xp xpg

View

Part Name: husky 288 281 181 xp choke pull link 501527902 Part Description: plastic choke, piece you pull on to activate the choke Detailed Condition Description: New old stock from closed out dealer. Fits the Following Models: 288 281 181 xp

View

PART: THROTTLE SAFETY CATCH LEVER PN 503556601 CONDITION: NEW oem from closed out dealer FITS: HUSQVARNA 385, 390, 394, 395, 362, 365, 371, 372, 385xp, 390xp, 395xp, 371xp, 372xp, SP Special. Is grey but can be used in place of the black ones on Jonsered models: 2063 2065 2071 2163 2165 2166 ...

View

Part: muffler exhaust gasket Condition: good used/working order Fits: Husqvarna 262 xp

View

Part: throttle cable 503 52 04-02 Condition: New old stock from closed out dealer. Fits: Husqvarna 394 chainsaws-may also fit Husky 395 XP

View

Part: throttle safety interlock lever. Part of PN 530-069587 Condition: good used/working shape Fits: Husqvarna 36, 41, 136, 141

View

Throttle trigger with spring New old stock from closed out dealer. May be dusty/dirty from years of storage. Fits Husqvarna 65 L 77 77L chainsaw models

View

Gas tank, rear trigger handle. Includes throttle trigger, cable and safety interlock. 503 47 34-01 New old stock from closed out dealer. A bit dusty and faded from years of storage. May have a few small scuffs. Fits 394 395 XP, 394xp

View

Part Number: 510208701 Part Description: AV Anti vibration element mount Fits the Following Models: 343F, 343FR, 343R Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.

View

Part: tensioning screw and adjusting pin Part #s 53001586, 530038593, 530016110, 530 01 58-26, 530 03 85-93, 530 01 61-10 Condition: new old stock from closed out dealer. Fits: Husqvarna 141, 136, 142, 137, 36, 41

View

Part: throttle rod link grommet Part # 537260401 Condition: used, good working condition Fits: Husqvarna 455 460 rancher

View

Part: crank case housing half, left flywheel side Condition: New old stock from closed out dealer. Bearing turns but may need cleaning or replacing. Fits: husqvarna 281 288 288xp

View

Part: top cover Part number: 5018945 Condition: NEW OEM, from closed out dealership. A bit dusty/dirty and has a few scratches from years of storage. Fits: Husqvarna 3120 XP

View

Inner bar plate oil guide. Husqvarna part number 530-047855 NEW old stock from closed out dealer Fits Husqvarna 137, 142

View

Pin Part number 537 20 30-01 537203001 New old stock from closed out dealer. Dusty/dirty from years of storage. Fits 565, 570, 570II, 572XP, 572XPG, 575XP, 576XP chainsaws

View

Part: guide bar plate. Part # 503856601 Condition: new old stock from closed out dealer. May have some slight surface rust from years of storage. Fits: Husqvarna 359, 357 XP, 353 and Jonsered 2159 2156 Turbo

View

cuttoff saw starter pulley 506 36 81-02 New old stock from closed out dealer Fits 371 k 375k 375 k saws

View

← 1 … 32 33 34 35 36 … 46 →