Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.
(2 in stock)
husqvarna 395 chainsaw piston and cylinder set new, after-market (bulky bin 1000)
Part: piston and cylinder with rings, wrist pin, clips. Part number 503 99 39-71 Condition: new, after-market part Fits: Husqvarna 395
husqvarna 345 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley and rewind spring. Does NOT include the grip/rope Part # 537 10 27-01 Condition: good used/working order Fits: Husqvarna 345
(2 in stock)
husqvarna 345 chainsaw piston and cylinder kit new replaces pn 503 87 02-74 (squirrell bin)
Part: piston and cylinder kit with ring and wrist pin Replaces Part # 503 87 02 74 Condition: new, after-market part Fits: Husqvarna 345 Location: squirrel bin
husqvarna 162 se chainsaw muffler assembly
Part: muffler with bolts and exhaust gasket Part # 501 52 15-05 Condition: good used/working shape Fits: some models of Husqvarna 162se
husqvarna 61, 266, 268, 272 chainsaw chip guard
Part: chip / dust guard for the clutch cover Part # 503 57 31-01 Condition: good used/working shape Fits: Husqvarna 61, 266, 268, 272
(1 in stock)
husqvarna 257 chainsaw felt air filter
Part: felt air filter 501 87 97-04 Condition: good used/ usable shape Fits: Husqvarna 257, 254
husqvarna 340, 345, 350, 346xp chainsaw exhaust gasket (hva 350 bin)
Part: muffler exhaust gasket Part # 503 86 25-01 Condition: good used/working shape Fits: Husqvarn 340, 345, 350, 346 xp
husqvarna 257, 262 chainsaw brake band and spring kit with hardware
Part: brake band, tension spring, knee joint lever, bolt set, spring Part # 503 51 21-01, 501 87 54-01, 507 76 81-01, 501 76 80-01, 501 87 53-01, 501 87 53-01 Condition: good used/working shape Fits: Husqvarna 257, 262
husqvarna 338xpt chainsaw rear trigger handle tank housing assembly with throttle parts
Part: fuel/oil tank rear trigger handle housing. Includes the throttle trigger, safety lever interlock, wire harness, fuel line and filter Part # 537 24 95-04, 503 96 32-01, 503 82 27-02, 503 57 76-02, 503 81 32-01, 503 81 33-01 Condition: good used/working order Fits: Husqvarna 338 xpt
husqvarna 254, 257, 261, 262 chainsaw starter rewind spring and container set
Part: starter rewind spring with container/ holder washer Part # 501 63 02-03, 503 54 45-01 Condition: good used/working shape Fits: Husqvarna 254, 257, 261, 262
husqvarna 136 chainsaw crankcase chassis tank housing
Part: crank case tank housing chassis with bar stud set Condition: good used/working shape Fits: Husqvarna 36
husqvarna 346xp, 353 and jonsered cs2153, cs2152 chainsaw hose line pn 544 33 10-01 (346 bin)
Part: hose line Part # 544 33 10-01 Condition: good used/working shape Fits: Husqvarna 346xp, 353 and Jonsered cs 2153 and 2152
husqvarna 65l and 77l chainsaw control panel
Part: control panel plate Part # 501 25 00-01 Condition: good used/working shape Fits: Husqvarna 65 and 77 L
husqvarna 61 chainsaw seal retainer plate used
Part: seal retainer plate Part # 501 52 82-01 Condition: good used/working shape Fits: Husqvarna 61
husqvarna 350 chainsaw oil pump only
Part: oil pump oiler Part # 537 10 55-01 and 503 85 48-01 5038912 Condition: good used/working shape Fits: Husqvarna 350
husqvarna 42 special chainsaw crankshaft and rod
Part: crank shaft with connecting rod Condition: good used/working shape Fits: Husqvarna 42 Special
husqvarna 42 special chainsaw decompression valve
Part: decomp valve Part # 503 66 54-01 Condition: good used/working shape Fits: Husqvarna 42 special
husqvarna 42 special chainsaw throttle safety and trigger kit
Part: throttle trigger and safety lever interlock with pins and spring part # 503 41 39-02, 503 41 38-02, 720 12 40-20, 720 12 42-20, 503 08 46-01 Condition: good used/working shape Fits: Husqvarna 42 special 242 246xp 246 xp
husqvarna 338xpt chainsaw piston and cylinder kit
Part: piston and cylinder with ring, pin, bearing, keeper clip set Part # 537 13 20-01 Condition: good used/working shape. Came off a saw with good compression, no breaks. Fits: Husqvarna 338 xpt
husqvarna 266, 272, 268 chainsaw bumper plate
Part: bumper plate Part # 503 44 57-01 Condition: good used/working shape Fits: husqvarna 266, 272, 268, 162se, 162sg, 162 se sg, 61 Practica Rancher, 266xp, 266se, 272xp, 268xp, 266 se sg xp. Jonsered 625 630 670 series.
(1 in stock)
husqvarna 36, 41 chainsaw fuel tank rear trigger handle #3 with 4 av mounts and throttle trigger parts
Part: fuel tank rear trigger handle. Includes 4 of the av buffer mounts / antivibe element, the throttle trigger and safety interlock lever. PN 530-014884, 530-069587, 501 62 87-01 Condition: good used/working shape Fits: husqvarna 36, 41
husqvarna 41 chainsaw crankcase chassis with bar stud set
Part: crank case chassis oil tank housing with set of bar studs/bolts. 530069942, 530-069942, 530 06 99-42 Condition: good used/working shape. Has a melted section as pictured, no leaks. Fits: Husqvarna 41 36 136 141
husqvarna 385 xp chainsaw piston bearing and pin
Part: bearing, wrist pin and keeper clips for the piston Condition: good used/working shape Fits: Husqvarna 385xp
(2 in stock)
husqvarna 575 xp, 570 chainsaw starter rewind spring
Part: starter rewind spring. Part # 537 28 34-01 Condition: good used/working shape Fits: Husqvarna 575xp, 570
(1 in stock)
husqvarna 335 xpt chainsaw chain catcher
Part: chain catcher stop Part # 501 68 68-01 Condition: good used/working shape Fits: Husqvarna 335xpt 338xpt 338 xpt 334T 334 T
(3 in stock)
husqvarna 136, 141 chainsaw oil pump housing
Part: housing for the oil pump Part # 530029835 / 530-029835 Condition: good used/working shape Fits: Husqvarna 141, 136
husqvarna 136, 141 chainsaw oil pump seal
Part: oil pump seal. Red or black in color. Part # 530019174 / 530-019174 Condition: good used/working shape Fits: Husqvarna 136, 141
(1 in stock)
husqvarna 136, 141 chainsaw crankcase cap
Part: crank case engine pan cap Part # 530028706 Condition: good used/working shape Fits: Husqvarna 136, 141
husqvarna 266 chainsaw intake gasket
Part: gasket Condition: good used/working shape Fits: Husqvarna 266
(4 in stock)
husqvarna 136, 141 chainsaw ignition off switch
Part: ignition off switch Part # 503 71 79-01 Condition: good used/working shape Fits: Husqvarna 136, 141, 137, 142, 36, 41
husqvarna 575 xp, 570 chainsaw assorted hardware for the brake
Part: hardware- bushings, bolts, spring, lever for the brake Condition: good used/working shape Fits: Husqvarna 575xp, 570
husqvarna 372 chainsaw piston pin, bearing
Part: wrist pin, bearing and keeper clip set for the piston Condition: good used/working shape Fits: husqvarna 372
husqvarna 40, 45 chainsaw carburetor gasket
Part: carb gasket Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 372, 371, 362 chainsaw flywheel washer
Part: washer for the flywheel Condition: good used/working shape Fits: husqvarna 372, 371, 362
(2 in stock)
husqvarna 385 xp chainsaw fuel cap type 1
Part: fuel / gas cap. Part # 537 21 52-02 Condition: good used/working shape Fits: Husqvarna 385xp
husqvarna 346xp chainsaw air filter twist on mesh
Part: air filter, twist on type Condition: good used/working shape Fits: husqvarna 346 xp
husqvarna 346 xp chainsaw crankshaft #2 (Pre-2008)
Part: crank shaft with connecting rod and bearings Condition: good used/working shape Fits: Husqvarna 346xp chainsaws older than 2008
(4 in stock)
husqvarna 266xp, 266se chainsaw filter mount and bolts type 2
Part: filter mount and bolt/screw set Condition: good used/working shape Fits: some models of husqvarna 266 xp, se (these models had several different type of filter mounts, so check yours to make sure they match)
husqvarna 262, 261 chainsaw handle cover filler (snap type)
Part: (1) snap type rear trigger handle cover / filler Condition: good used/working shape Fits: husqvarna 261, 262
husqvarna 346xp chainsaw .325-7 rim sprocket with bearing
Part: .325 x 7 clutch rim sprocket drum with bearing Condition: good used/working shape Fits: husqvarna 346 xp, 353. Jonsered 2152 2149 2153 Turbo
husqvarna 385xp chainsaw starter housing cover
Part: starter housing recoil cover only Condition: good used/working shape Fits: husqvarna 385 xp
husqvarna 40, 45 chainsaw chain catcher
Part: chain catcher stop. Part # 506 03 16-04 Condition: good used/working shape Fits: husqvarna 40, 45
husqvarna 254, 257, 154 chainsaw handle brace
Part: top handle brace , part # 501 86 72-02 Condition: good used/working shape may be black or orange Fits: husqvarna 254, 257, 154
husqvarna 254, 257, 262, 261 chainsaw starter pawl kit
Part: starter pawl kit for the flywheel. Includes (2) pawls, spring, studs Condition: good used/working shape Fits: husqvarna 254, 257, 262, 261
husqvarna 50, 51, 55, 257 chainsaw clutch spring new replaces part # 501 45 61-01 (bin 530)
Part: clutch spring Replaces Part # 501 45 61 01 Condition: new, after-market part Fits: Husqvarna 50, 51, 55 rancher, 257 and some other models Location: box 530
(1 in stock)
husqvarna 288 chainsaw 54mm piston kit 503 50 60-02 new (box 529)
Part: 54mm piston kit, includes the ring, wrist pin and keepers 503 50 60-02 Condition: new, after-market part Fits: Husqvarna 288, 288xp, 288 XP lite
(1 in stock)
husqvarna 136 chainsaw carburetor #2 walbro wt-540
Part: walbro wt540 carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Husqvarna 136
husqvarna 359, 357 xp chainsaw boot clamp
Part: boot clamp/ring Condition: good used/working shape Fits: Homelite 357, 359 xp
(4 in stock)
husqvarna 254, 266, 268, 42, 262 chainsaw brake lock spring (254 bin)
Part: lock spring. PN 503 49 34-01 goes inside of brake handle Condition: good used/working shape Fits: Husqvarna 254, may also fit other models
husqvarna 36, 41 chainsaw fuel cap
Part: fuel / gas cap Condition: good used/working shape Fits: Husqvarna 36, 41
(1 in stock)
husqvarna 235, 230 chainsaw ezt knob assembly
Part: ezt knob assembly that fits into the clutch cover. Part # 545-146401 Condition: good used/working shape Fits: Husqvarna 235, 230
(2 in stock)
husqvarna 570, 575 xp chainsaw muffler gasket
Part: muffler gasket, part # 537 20 82-01 Condition: good used/working shape Fits: Husqvarna 570, 575xp, 576xp
husqvarna 570, 575 xp chainsaw muffler bolt set
Part: set of two muffler bolts Condition: good used/working shape Fits: Husqvarna 570, 575 xp
husqvarna 570, 575 xp chainsaw av spring mount
Part: cylinder av spring mount 503 63 75-02 Condition: good used/working shape Fits: Husqvarna 570, 575 576 xp 575xp 576xp 365, 372, 362, 575 xp, 570, 576 xp, 371, 371xp, 372xp, 362 Special 575xp 576xp and Jonsered CS 2063 2065 2071 2163 2165 2171 2166 2172 Turbo chainsaws
(2 in stock)
husqvarna 340, 345 chainsaw oil pump
Part: oil pump oiler. Part # 503 93 21-01 & 537 15 48-01 Condition: good used/working shape Fits: Husqvarna 340, 345
husqvarna 44 chainsaw piston and cylinder kit
Part: piston and cylinder, includes the ring, wrist pin, bearing and keepers Condition: good used/working shape. Came off a saw with good compression. Fits: Husqvarna 44 444
husqvarna 288, 281 chainsaw fuel tank rear trigger handle
Part: fuel tank rear trigger handle, bare bones Condition: good used/working shape. No leaks. Fits: Husqvarna 288, 281
(1 in stock)
husqvarna 570, 575 xp chainsaw clutch sprocket assembly
Part: clutch assembly, includes the rim sprocket drum, mechanism (shoes, springs, rotor), rim, bearing and washers. Part # 537 03 62-05. Condition: good used/working shape Fits: Husqvarna 570, 575xp
husqvarna 570, 575 xp chainsaw chain catcher stop
Part: chain catcher stop. Part # 537 02 44-01 Condition: good used/working shape Fits: Husqvarna 570, 575xp, 576xp, 385xp, 390xp, 372xp, 365sp, 385 390 372 365
husqvarna 575 xp chainsaw crankshaft with connecting rod
Part: crank shaft and connecting rod Condition: good used/working shape Fits: Husqvarna 575xp
husqvarna 480 cd chainsaw muffler gasket
Part: muffler exhaust gasket Condition: good used/working shape Fits: Husqvarna 480cd 380cd 380 480 cd and others
husqvarna 36, 41 chainsaw fuel tank rear trigger handle kit #1
Part: fuel tank rear trigger handle. Includes 4 av buffer mounts, throttle trigger and safety lever, fuel cap. Condition: in good used/working shape Fits: Husqvarna 36, 41
husqvarna 480 cd chainsaw intake manifold spacer
Part: intake manifold spacer Condition: Good used/working shape Fits: Husqvarna 480cd
Husqvarna 266 Chainsaw Right Crankcase Crank Case Half #2
Part: clutch side crank case half, bare bones Condition: good used/working shape. Has some chipping. Fits: Husqvarna 266
husqvarna 480 cd chainsaw muffler with deflector
Part: muffler assembly with deflector Condition: good used/working shape Fits: Husqvarna 480cd
Husqvarna 346 XP Chainsaw Carburetor Housing Base
Part: Husky 346 XP Carb Housing Base. Pn 503 89 66-01 Condition: good used/working shape fits: 346 353 351, 346xp husqvarna
Husqvarna 346XP Chainsaw gray Clutch cover with brake
Part: Husky 346 XP Clutch Brake Cover with brake band, cover, mechanism, spring. PN 537 10 78-01 Condition: good used/working shape
husqvarna 261 xp chainsaw top cover shroud
Part: top cover engine shroud Condition: in good used shape Fits: Husqvarna 261 xp
Husqvarna 32 Chainsaw Ignition Kit
Part: Husky 32 Points & Condenser Ignition Kit Condition: good used/working shape. Tested and works with strong spark.
husqvarna 575 xp, 570 chainsaw carburetor grommet
Part: carb adjust grommet. Part # 537 20 36-01 Condition: good used/working shape Fits: Husqvarna 575xp, 570
husqvarna 272 chainsaw starter pulley
Part: starter pulley. PN 503 10 24-05 Condition: good used/working shape Fits: Husqvarna 272 XP, 272XP, late model 61, late model 268, 268xp.
husqvarna 371 xpg chainsaw heated handles stator
Part: heated handles stator. 537 07 18-02 Condition: good used/working shape Fits: Husqvarna 372xpg 385xpg 390xpg Jonsered 2171w 2172w 2186w 2188w Turbo with heated handles
husqvarna 380 chainsaw top handle bar
Part: top wrap handlebar Condition: good used/working shape- scratched/scuffed/some missing rubber Fits: Husqvarna 380 280 480 380cd 280cd 480cd cd
husqvarna 288, 281 chainsaw starter pulley
Part: starter pulley 503 48 48-01 Condition: good used/working shape Fits: Husqvarna 288, 281
husqvarna 288 chainsaw brake cover
Part: brake dust cover. PN 503 57 52-01 Condition: good used/working shape Fits: Husqvarna 288, 281 XP
husqvarna 285 chainsaw clutch sprocket assembly
Part: clutch assembly - includes the rim type sprocket drum with new 3/8 8 tooth sprocket. Condition: used/working shape. Fits: Husqvarna 285 285cd 480 480cd 380 cd 380cd and others
(1 in stock)
Husqvarna 181, 281, 288 Chainsaw muffler only
Part: Muffler, does not include spark arrestor. Condition: good used/ working condition Fits: Husqvarna 181, 281, 288XP
Husqvarna 181, 281, 288 Chainsaw Flywheel fan shroud Gray
Part: Flywheel fan shroud 501 80 19-02 Condition: Good used/ working shape Fits: Husqvarna 181, 281, 288XP
Husqvarna 181 Chainsaw crankcase case half, clutch side
Part: Clutch side crankcase half. Includes bar studs Condition: Good used/ Working Condition Fits: Husqvarna 181
husqvarna 42, 246, 242 chainsaw safety throttle lock pn 503 41 39-02 new (box H-41)
Part: throttle safety lock Part # 503 41 39 02 Condition: new old stock part. Dusty/dirty from years of sitting in storage Fits : Husqvarna 42, 242, 246 Location: Box H-41
husqvarna 371, 372, 362, 365 & Jonsered 2065, 2165 chainsaw bushing pn 503 96 70-01 new ( box H-40)
Part: crankcase bushing Part # 503 96 70 01 Condition: new old stock part. Dusty/dirty from years of storage. Fits: Husqvarna 371, 372, 362, 365. Jonsered 2065, 2165 Location: Box H-40
husqvarna 141, 136 chainsaw brake guard
Part: brake guard chainbrake handle actuating lever. Husqvarna part number 530071348, 530 07 13-48, 530-071348 Condition: good used/working shape. plastic is faded Fits: Husqvarna 141, 136, 142, 137, 36, 41
(1 in stock)
husqvarna 41 chainsaw top cover shroud (gray)
Part: top cover engine shroud. Does not include screws. Condition: good used/working shape Fits: Husqvarna 41
husqvarna 285, 480, 185 chainsaw flywheel cover
Part:flywheel cover shroud / air conductor. Part # 501 40 95-01 Condition: good used/working shape Fits: came off a Husqvarna 285 but will also fit 480 & 185
husqvarna 40, 45 chainsaw walbro wt17b chainsaw carburetor
Part: Walbro WT 17B carburetor WT 17c Condition: good used physical shape. May need a carb rebuild kit. Fits: Walbro WT 17B
husqvarna 371, 372 xp chainsaw clutch bearing
Part:clutch bearing Condition: good used/working shape Fits: Husqvarna 371, 372 xp
(3 in stock)
husqvarna 371, 372 xp chainsaw sawdust chip guard
Part: clutch cover chip and saw dust guard 503 76 29 - 02 Condition: Dinged/chewed up a little but usable Fits: Husqvarna 371, 372 xp, 365 362 Special, 372xp 371xp. Jonsered 2063 2065 2071 2163 2165 2171 2166 2172 Turbo.
(4 in stock)
husqvarna 371, 372 chainsaw air filter mount (clip on type)
Part:air filter mount type 1 for non HD air filters (clip on), part # 503 62 75-01 Condition: good used/working shape Fits: Husqvarna 371, 372
(1 in stock)
husqvarna 162 chainsaw throttle safety lock
Part: throttle safety lock / catch Condition: good used/working shape Fits: Husqvarna 162
(2 in stock)
husqvarna 162 chainsaw flywheel and starter pawls
Part: flywheel rotor with starter pawls and springs. 501 51 64-01 Condition: good used/working shape. No broken fins. Fits: Husqvarna 162, 162se, 61 Practica Rancher
(1 in stock)
husqvarna 162 chainsaw intake manifold and insulator
Part: intake manifold and insulator 501 51 18-02 Condition: good used/working shape Fits: Husqvarna 162, 162 SE, 162se
(2 in stock)
husqvarna 40, 45 chainsaw filter housing base only
Part: carburetor intake base Condition: good used/working shape Fits: Husqvarna 40, 45
husqvarna 288 chainsaw tillotson chainsaw carburetor type 1 (HS228B)
Part: Tillotson HS 228B caruburetor 503 28 04-01 Condition: good used physical shape. May or may not need a carb rebuild kit Fits: Husqvarna 288xp, 288 lite, 281
(4 in stock)
husqvarna 268, 272, 262, 261 chainsaw inner air filter (felt type)
Part: inner air filter. Felt / fleece type. Part # 503 44 72-03 Condition: worn but usable Fits: Husqvarna 268, 272, 262, 261, 272xp
husqvarna 266 chainsaw crankshaft and connecting rod #1
Part: crank shaft with connecting rod Condition: good used/working shape Fits: Husqvarna 266
(3 in stock)
husqvarna 480, 185, 380 CD chainsaw pulley shaft pn 501 40 27-01 new (bin H-30)
Part: pulley shaft Part # 501 40 27 01 Condition: New old stock OEM part. Has minor rust from years of storage. Fits: Husqvarna 77L, 480, 480 CD, 185 CD, 380 CD Location: Husky Bin H-30
husqvarna 444, 238 + chainsaw spacer pn 501 59 74-01 new (bin H-24)
Part: spacer Part # 501 59 74 01 Condition: New old stock OEM Part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 444, 238, 154, 254, 181, 288, 181 Location: new Husky bin H-24
(1 in stock)
husqvarna 45, 50 + chainsaw starter pawl pn 503 41 22-01 new (bin H-24)
Part: starter pawl Part # 5034 2201 Condition: New old stock OEM Part. Fits: Husqvarna 40, 45 & 50, 51 Location: new Husky bin H-24
(2 in stock)
husqvarna 2101, 480 chainsaw flywheel stud pn 501 69 76-01 new (bin H-24)
Part: flywheel starter pawl stud Part # 501 69 76 01 Condition: New old stock OEM Part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Husqvarna 2101, 480 Location: new Husky bin H-24