Lots of used husqvarna chainsaw parts on hand here. Tons of husqvarna chainsaw parts for older models like 266 262 272 50 51 55 254 and many other models of older husqvarna chainsaw.
Sold Out!
Chain tensioning screw and bar adjusting pin. Part # 501 53 71-01
In good used shape.
Fits: Husqvarna 181 281 288 XP SE SG
View
$6.50
Sold Out!
Front bumper plate, smooth spike. 544 05 73-01
NEW
Fits Husqvarna 365, 362, 371, 372, 385, 570, 575, 385, 390 XP XPG, 371xp, 372xp, 385xp, 575xp. Jonsered 2063 2065 2071 2163 2165 2171 2166 2172 2186 2188 Turbo
View
$7.95
Sold Out!
Handle filler set with mounting hardware. 501 62 89-01
In good used shape
Fits Husqvarna 181se 281
View
$5.00
Sold Out!
Half wrap around top handle 503 46 35-71
In good used shape
Fits Husqvarna 394 395 xp, 394xp, 395xp
View
$25.00
Ready to ship (1 in stock)
Right side rear trigger handle half 537 23 06-01
In good used shape - does NOT include mount
Fits Husqvarna 455 460 rancher
View
$29.95
Sold Out!
Fuel tank with throttle parts and vent
New OEM part
Fits Husqvarna 385 390 xp, 390xp
View
$160.00
Sold Out!
Part: muffler heat shield plate, muffler gasket
Condition: good used/working shape
Fits: Husqvarna 340, 345, 350, 346xp, jonsered 2150, 2145, 2152, 2153, 2149
View
$5.99
Sold Out!
Replaceable rim type clutch drive sprocket. Includes drum, .325 7 tooth rim, and bearing. 503 15 98-01, 503 15 98-01, 503 25 34-01, 501 45 74-02. Will replace spur 503 15 98-02
NEW aftermarket part
Fits Jonsered 2050, 2045, 2041 Turbo. Husqvarna 40, 45, 49
View
$22.50
Sold Out!
Muffler 501 81 68 01
New AFTERMARKET part
Fits Husqvarna 181 281 288, 288xp, 281xp, 181 SE SG
View
$29.95
Ready to ship (2 in stock)
52mm Bore Piston assembly: with wrist pin, ring, and keepers. 503609802
New aftermarket part
Fits Husqvarna 272 XP, and Jonsered 670 series (52mm bore)
sale
View
$19.12
- $25.49
Ready to ship
Starter pulley rope spool 537 20 19 01
NEW original Husqvarna part
Fits Husqvarna 335xpt, 338xpt. Jonsered 2135 2135 Turbo and others
View
$15.00
Sold Out!
Part: choke lever
Fits: Husqvarna 2100, 285
Part # 501 29 43-01
Condition: good used/working order
View
$3.50
Sold Out!
Felt air filter. Husqvarna part number: 503 70 89-01
In good used shape
Fits Husqvarna 395 xp
View
$12.00
Sold Out!
48mm OEM Mahle Cylinder A size
In good used shape
Fits Husqvarna 365, 365sp. Jonsered 2065, 2165 turbo
View
$45.00
Sold Out!
Part: walbro hda-198a HDA198 HDA198a carburetor Part # 503 28 18-17 Condition: good used physical shape, may need a carb rebuild kit Fits: Husqvarna 359 357xp 2159 2156 Turbo Jonsered
View
$27.00
Sold Out!
Part: throttle trigger with safety interlock lever/throttle latch
Part # 503 09 79-04, 501 77 20-02
Condition: good used/working order
Fits: Husqvarna 50 Series. 50 Special, Rancher, Practica
View
$9.95
Backordered
Complete brake assembly side cover. 545 07 11-03, 525 62 89-01
In good used shape.
Fits newer Husqvarna 235, 240e etc.
View
$19.95
Sold Out!
Part: oil guide grommet 503 98 62-01
Condition: good used/working order
Fits: Husqvarna 335 xpt 338 xpt 338xpt 334t 334 t
View
$3.50
Ready to ship (1 in stock)
Part: guide bar plate
Part # 530-047855
Condition: good used/working order
Fits: Husqvarna 142 137 Poulan Pro 4620 and many others
View
$1.99
Sold Out!
Part: carburetor adjust sleeve
Part # 501 80 69-01
Condition: good used/working order
Fits: Husqvarna 288, 281, 181
View
$3.00
Ready to ship (1 in stock)
Starter recoil rewind pulley. Part number 503 85 96-01
New aftermarket part
Fits Husqvarna 362, 365, 371 XP, 372 XP, 371XP, 372XP, 385xp, 385. Jonsered 2063, 2065, 2071, 2163, 2165, 2171, 2186 turbo and others
View
$15.00
Sold Out!
Part: crank case tank chassis with bar stud set
Condition: has some minor melt marks, in good used/working order with no leaks
Fits: Husqvarna 350 models which have primers
View
$49.95
Sold Out!
Part: fuel tank rear trigger handle with the 2 front av buffer mounts, throttle trigger, and safety interlock lever. 501 69 90-10, 501 62 96-01, 501 51 80-02, 501 51 81-02 and others
Condition: good used/working order.
Fits: Husqvarna 61 Rancher, 61 Practica, 61, 66, 266, 266 XP SE SG, 266xp e...
View
$40.00
Sold Out!
Part: brake parts for the chainbrake, includes the band, spring, lever and hardware pictured
Part # 501 76 48-01, 501 82 92-02, 501 76 49-01, 501 77 05-01, 501 76 54-01, 501 76 81-01, 501 76 80-01, 501 77 12-01
Condition: good used/working order
Fits: Husqvarna 50 Rancher
View
$19.95
Sold Out!
Part: piston and cylinder with crankshaft, rod, intake manifold kit, spring mount Condition: good used/working order, came off a saw with good compression. No breaks or scoring Fits: Husqvarna 340
View
$69.00
Sold Out!
288 husqvarna throttle trigger and safety latch assbemly
good used working condition
fits husqvarna 288, 281
View
$23.95
Ready to ship (3 in stock)
Part: coarse thread crank shaft and rod most likely will not include bearings or nut.
Condition: good used/working order
Fits: some models of Husqvarna 61, 266, 266se and 162
View
$37.50
Ready to ship (1 in stock)
Part: muffler attachment plate
Part # 501 60 84-01
Condition: good used/working order
Fits: some models of Husqvarna 61 and 266
View
$2.95
Sold Out!
Part: wire harness
Part # 503 89 87-02
Condition: good used/working order
Fits: Husqvarna 346 xp, 353
View
$4.50
Ready to ship (2 in stock)
Part: top cover
Part # 544 07 95-01
Condition: good used/working order, little melting on front edge. Has some scratches and may need some cleaning.
Fits: Husqvarna 445, 450, 445e, 450e
View
$7.99
Sold Out!
Part: 44mm diameter bore top end. Includes: cylinder, piston, ring and wrist pin 505 34 12-85.
Condition: good used/working order.
Fits: Husqvarna 50, 50 Rancher Special or Practica
View
$85.00
Sold Out!
Part: starter housing cover with pulley, rewind spring
Condition: good used/working order, but not great cosmetically
Fits: Husqvarna 154, 254, 254se, 154se, 154sg
View
$25.00
Backordered
Part: clutch sprocket guard cover with chain tensioner adjuster assembly
Condition: good used/working order
Fits: Husqvarna 570, 575 xp
View
$26.50
Sold Out!
Part: carb adjust grommet
Condition: good used/ working order
Fits: Husqvarna 261, 262xp, 257
View
$4.50
Sold Out!
Part: top cover engine shroud 503 61 00-03
Condition: good used/working order.
Fits: Husqvarna 268 and some models (late) of 61
View
$22.95
Sold Out!
Part: 48mm piston kit, includes the ring, wrist pin and keeper clips
Condition: new, after-market part
Fits: Husqvarna 262
Location: new misc. parts bin
sale
View
$19.12
- $25.49
Sold Out!
Part: top cover engine shroud
Condition: good used working order
Fits: Husqvarna 162 se
View
$29.99
Sold Out!
Part: off switch
Part # 503 717901
Condition: good used/working shape
Fits: Husqvarna 36, 41
View
$5.99
Sold Out!
Part: muffler with support bracket plate and bolts. Equipped for spark arrestor but does not include the screen.
Part # 503 50 79-05, 503 50 86-02, 725 53 87-55
Condition: good used/working shape
Fits: Husqvarna 257
View
$35.00
Sold Out!
Part: piston and cylinder with ring, wrist pin, bearing, keeper clip set
Condition: good used/working shape. Came off a saw with good compression, no breaks.
Fits: Husqvarna 162 se, 61
View
$80.00
Sold Out!
Part: brake band and spring with knee joint lever and dust cover
Part #s 503 70 47-01, 503 70 40-01, 503 70 99-01, 501 87 53-03
Condition: good used/working shape
Fits: Husqvarna 268, 61, 272, 266
View
$15.00
Backordered
Part: hand guard brake handle
Condition: good used/working shape.
Fits: Husqvarna 262, 261, 157
View
$15.99
Sold Out!
Part: pin, bearing and clips for the piston
Condition: good used/working shape
Fits: Husqvarna 268
View
$6.99
Sold Out!
Part: HD west coast air filter
Condition: good used/working shape
Fits: some models of Husqvarna 272xp
View
$15.00
Sold Out!
Part: muffler with bolts 530 06 94-15
Condition: good used/working shape
Fits: Husqvarna 136, 141, 36, 41 and can be retro fit onto the 137 and 142
View
$19.99
Ready to ship (2 in stock)
Part: av buffer mount kit for the handlebar with hardware
Part # 202 44 63-45, 280 14 93-11, 501 55 76-01, 501 55 75-01, 501 55 74-01, 299 89 37-45
Condition: good used/working shape, some age to the rubber but usable
Fits: Husqvarna 65 and 77 L
View
$12.99
Ready to ship (1 in stock)
Part: felt type which does not have the screw through the top of the air filter
Condition: good used/working shape
Fits: some models of Husqvarna 51, 55
View
$6.00
Ready to ship
Part: gasket kit, includes the crankcase, cylinder base and muffler exhaust gasket
Part # 537 21 26 01
Condition: new
Fits: Husqvarna 570, 575xp xpg
View
$16.95
Ready to ship (1 in stock)
Part: throttle cable wire. Part # 503 71 76-01
Condition: good used/working shape
Fits: Husqvarna 371, 372, 362, 365 and Jonsered 2165, 2065 turbo
View
$5.99
Sold Out!
Part: oil pump worm gear for .325x7
Part # 503 93 18 01
Condition: good used/working shape
Fits: Husqvarna 345, 340
View
$5.00
Sold Out!
Part: fine thread crank shaft with connecting rod
Condition: good used/working shape
Fits: Husqvarna 61, Later model 266 XP, 266, 66, and 268
View
$25.00
Sold Out!
Part: top handlebar
Part # 501 62 90-03
Condition: good used/working shape
Fits: Husqvarna 42 special, 242, 242xp, 246
View
$25.00
Ready to ship (1 in stock)
Part: clutch mechanism (shoes, springs and carrier)
Part # 503 87 50-01
Condition: good used/working shape
Fits: Husqvarna 385xp 390xp 385 390 xp. Jonsered 2186 2188 Turbo
View
$25.00
Sold Out!
Part: muffler exhaust heat shield and gasket
Part # 537 08 62-01 and 503 77 59-01
Condition: good used/working shape
Fits: Husqvarna 385xp
View
$5.99
Sold Out!
Part: crank case chassis half, right clutch side with set of bar studs/bolts
Condition: good used/working shape
Fits: Husqvarna 346 xp, 353
View
$39.95
Sold Out!
Part: throttle cable, part # 503 83 28 01
Condition: good used/working shape
Fits: Husqvarna 335 and 338 xpt
View
$4.99
Sold Out!
Part: impulse hose. Part # 503 84 26-01
Condition: good used/working shape
Fits: Husqvarna 335xpt 338xpt 335 338 xpt
View
$4.99
Sold Out!
Part: chain tensioning screw and adjusting nut
Part # 537 10 65-01
Condition: good used/working shape
Fits: Husqvarna 335 and 338 xpt 334t 334 t
View
$6.50
Ready to ship
Part: muffler
Part # 503 93 03-01
Condition: good used/working shape
Fits: Husqvarna 335xpt, 338 xpt, 338xpt 334t 334 t . Jonsered 2135, 2138
View
$15.00
Ready to ship (4 in stock)
Part: oil pump drive gear
Part # 503 78 92-01
Condition: good used/working shape
Fits: Husqvarna 335xpt, 338, 338XPT, 335 xpt 334t 334 t
View
$3.50
Sold Out!
Part: muffler cover guard
Part # 503 81 14-02
Condition: good used/working shape
Fits: Husqvarna 335xpt 338 xpt 334 t 334t
View
$9.95
Sold Out!
Part: crank case housing half
Condition: Some oxidation and staining. Good thread holes, and in good usable shape.
Fits: Husqvarna 394, 395xp
View
$49.95
Ready to ship (1 in stock)
Part: carb sleeve / grommet, part # 503 99 93-01
Condition: good used/working shape
Fits: husqvarna 385xp Jonsered CS2186 CS 2186 CS-2186
View
$3.99
Discontinued
... ETC ...
Part: top cover (503 74 01-02)
Condition: good used/working shape
Fits: husqvarna 385xp
View
$29.99
Sold Out!
Part: brake dust cover, part # 503 57 30-01
Condition: stained, good used/working shape
Fits: Husqvarna 266, 61, 268, 272
View
$4.00
Backordered
Part: vented fuel gas cap
Condition: good used/working shape
Fits: husqvarna 61
View
$9.95
Sold Out!
Part: chain catcher, part # 503 47 05-01
Condition: shows wear, is in usable shape
Fits: husqvarna 394, 395 and some other models
View
$5.00
Sold Out!
Part: top cover engine shroud 537 42 20-01
Condition: Is in usable condition. Has some scratches/stains.
Fits: husqvarna 340, 345, chainsaws 2008+ primer equipped
View
$9.95
Ready to ship (3 in stock)
Part: brake bolt / pivot set. 501 82 44-01, 501 82 43-01
Condition: good used/working shape
Fits: early model (older) Husqvarna 61, 162, 266 chainsaws which have metal clutch covers
View
$4.99
Ready to ship
Part: intake manifold
Condition: good used/working shape
Fits: Husqvarna 61
View
$3.00
Ready to ship (1 in stock)
Part: muffler
Replaces Part # 530 06 94 15
Condition: new, after-market part
Fits: Husqvarna 36, 136, 41, 141, 137, 142
Location: box ZZ
View
$25.00
Ready to ship
Part: starter pawl for the flywheel
Replaces Part # 501 67 32 01
Condition: new, after-market part
Fits: Husqvarna 61, 266, 268, 272
Location: new misc. parts bin #4, box 527
View
$3.75
Sold Out!
Part: off stop switch 503 71 79-01
Condition: good used/working shape
Fits: Husqvarna 394 395 xp 394xp 395xp
View
$6.99
Sold Out!
Part: oil guide, part # 506 02 42-01
Condition: good used/working shape
Fits: Husqvarna 40, 45 and some other models
View
$4.25
Sold Out!
Part: set of carb bolts / screws. Part # 503 49 69-03
Condition: good used/working shape
Fits: Husqvarna 262xp
View
$3.99
Sold Out!
Part: brake band with tension spring, knee joint and lever
Condition: good used/working shape
Fits: Husqvarna 254, may also fit other models
View
$15.00
Ready to ship
Part: oil pump 503 52 13-03
Condition: good used/working shape
Fits: Husqvarna 575xp, 570, 576xp
View
$25.00
Ready to ship (2 in stock)
Part: filter mount clip, part # 503 73 54-01
Condition: good used/working shape
Fits: Husqvarna 371 xp, 365, 362 special, Jonsered 2171, 2071, 2065, 2165
View
$3.99
Sold Out!
Part: flywheel key
Condition: good used/working shape
Fits: Husqvarna 61, 266
View
$1.99
Sold Out!
Part: (1) starter pawl and stud
Condition: Good used/working shape
Fits: Husqvarna 2100
View
$6.99
Sold Out!
Part: piston and cylinder with piston, piston rings, wrist pin, keepers and bearing. 501 25 02-01. 52mm B series
Condition: good used/working shape.
Fits: Husqvarna 480cd, 380cd, 380 280 cd
View
$95.00
Sold Out!
Part: brake spring 503 46 59-01
Condition: good used/working shape
Fits: Husqvarna 340 345 350 346xp 351 353 359 357xp 266xp 272xp. Jonsered 2141 2145 2150 2149 2152 2153 2156 2159 Turbo, 670 and other models.
View
$2.95
Ready to ship
Part: 3/8-7 rim clutch sprocket drum with a new replacement rim. PN 503 93 48-71
Condition: good used/working shape
Fits: Husqvarna 357xp, 359xp
View
$10.00
Sold Out!
Part: Husky 346 XP Rubber Bushing bumper. PN 503 86 92-01
Condition: good used/working shape
View
$2.74
Ready to ship
Part: flywheel with starter pawl, spring and stud set. PN 503 82 43-01.
Condition: good used/working shape. No broken fins.
Fits: Husqvarna 346xp, 353. Jonsered 2152 2153 Turbo
View
$15.00
Ready to ship (1 in stock)
Part: rear trigger handle with both casing halves. 503 10 56-02, 503 50 52-02
Condition: good used/working shape
Fits: Husqvarna 40, 45
View
$28.00
Sold Out!
Part: top cover screw
Part # 503 21 43 38
Condition: new old stock OEM part. Dusty/dirty from years of storage.
Fits: Husqvarna 51, 55, 50, 55 Rancher and others
View
$3.50
Sold Out!
Part: protecting cup
Part # 501 68 08 01
Condition: new old stock OEM part.
Fits: Husqvarna 480
View
$5.00
Sold Out!
Part: recoil, rewind starter cover only, no internal parts
Condition: good used/ working shape may have scuffing /scratching
Fits: Husqvarna 181, 281, 288
View
$25.00
Ready to ship (1 in stock)
Part: stop switch kill shorting lead wire
Part # 501 83 98 01
Condition: new old stock OEM part. Dusty/dirty from years of sitting in storage.
Fits: Husqvarna 61 late, 268, 242, 254, 238, 272xp, 268xp, 242xp, 246, 42 Special, 254xp, 254se, 257xp, 261, 262xp....
View
$12.50
Sold Out!
Part: ignition off switch
Part # 503 71 81 01
Condition: new old stock OEM part. Dirty/dusty from years of
storage.
Fits: some models of Husqvarna 254, 262. May also fit other models.
Location: H-45
View
$14.00
Ready to ship
Part: sawdust chip guard protector
Part # 503 57 37 01
Condition: New old stock OEM part. Dusty/dirty from years of storage.
Fits: Husqvarna 394, 395, 288, 281
Location: Box H-45
View
$9.95
Backordered
Part: carburetor insert clip
Part # 503 47 48 01
Condition: New old stock OEM part. Dusty/dirty from years of
storage.
Fits: Husqvarna 394
Location: Box H-45
View
$4.99
Ready to ship (1 in stock)
Part: muffler screen
Part # 501 53 53 01
Condition: new old stock part.
Fits Husqvarna 266, 61, 162. Jonsered 630.
Location: Box H-41
View
$7.99
Ready to ship (1 in stock)
Part: intake manifold spacer
Part # 501 53 38 01 / 501 53 38 03
Condition: new old stock part. Dusty/dirty from years of
sitting in storage
Fits: Husqvarna 61
Location: Box H-41
View
$12.50
Sold Out!
Part: crankcase oil tank. Includes the bar stud set. Bare bones otherwise.
Condition: good used/working shape with no breaks or leaks.
Fits: Husqvarna 141
View
$19.00
Sold Out!
Part: Walbro carburetor
Condition: good used physical shape. May need a carb rebuild kit
Fits: Husqvarna 36, 41
View
$15.00
Sold Out!
Part: clutch cover only, part of 503 10 63-02
Condition: good used/working shape
Fits: Husqvarna 40, 45, 49
View
$17.95
Sold Out!
Part: air filter
Condition: good used/working shape
Fits: Husqvarna 162
View
$9.95