Homelite XL-12, Super XL chainsaw Felt Seal NEW 59760 Chainsaws (hm 334)
felt seal fits Homelite XL12 and Super XL auto chainsaws. Part #: 59760 New old stock part from closed out dealer.
Homelite Starter Rewind Spring NEW 65107 Fits Homelite 150 Chainsaws (hm 327)
Homelite starter rewind spring fits the following Homelite chainsaws: Super EZ, 150, 350, 360, and 250. Part #: 65107 New old stock part from closed out dealer.
Homelite Chainsaw Heat Dam Gasket NEW 06840A Fits Some Homelite Chainsaws (hm 327)
Homelite heat dam gasket fits some Homelite chainsaws. Part #: 06840A, 06840 New old stock part from closed out dealer.
(3 in stock)
Homelite Chainsaw Point Set NEW A-68710 Fits Homelite Super EZ Chainsaws (hm 326)
Homelite point set fits Homelite Super EZ and EZ AO chainsaws. Part #: A-68710, A68710, 68710 New old stock part from closed out dealer.
Homelite 330 Chainsaw Shaft Seal NEW 93858 Chainsaws (hm 319)
Homelite shaft seal fits Homelite 330, 250, cs-50, and 5020 chainsaws. Part #: 93858 New old stock part from closed out dealer.
Homelite 240 Chainsaw Bar Nut NEW 81258 (hm 318)
Homelite bar nut fits Homelite 240, 245, and CS50 chainsaws. Part #: 81258 UP06989 New old stock part from closed out dealer.
Homelite 360 Chainsaw Roller Bearing NEW 63867 (hm 313)
roller bearing fits the following Homelite chainsaws: 360, 350, and Xl-101. Part #: 63867 New old stock part from closed out dealer.
Homelite Super XL Auto Chainsaw Crankshaft Ball Bearing NEW 58190 (hm 311)
crankshaft ball bearing. Part #: 58190 New old stock part from closed out dealer. Fits Homelite Super XL auto (UT-10045)
Homelite Super EZ Chainsaw Reed Valve NEW 65012-A (hm 311)
reed valve fits the following Homelite chainsaws: EZ, Super EZ, EZ-250, XL Mini Automatic. Part #: 65012A, 65012 New old stock part from closed out dealer.
Homelite super 650 Chainsaw Gear Cover NEW 12134 (hm 253)
gear cover fits Super Homelite 650, 350, 360, 650, 750 chainsaws. Part #: 12134 New old stock part from closed out dealer.
Homelite xl-101 Chainsaw clutch spur Sprocket and Drum NEW A-63217 (hm 309)
Homelite 3/8-7 T spur sprocket and drum fits Homelite XL-101 chainsaws. Part #: A-63217, A63217, A 63217, 63217 New old stock part from closed out dealer.
Homelite xL-101 Chainsaw Fuel Tank valve NEW A64311 (hm 309)
fuel tank valve fits Homelite XL 101, XL 102, XL 103, and XL 104 chainsaws. Part #: A-64311 New old stock part from closed out dealer.
Homelite Chainsaw Crankcase Seal Gasket NEW 55048A Fits Homelite 4-20 Chainsaw (hm 309)
Homelite crankcase seal fits Homelite 4-20, 7-19, 7-19C, 17, 700D, 707D, 775, EZ, EZ-6, C-Series, XP-1000 chainsaws. Part #: 55048A, 55048-A New old stock part from closed out dealer.
homelite super 2, xl, xl-2 chainsaw oil filter a-68593 new (hm 21)
Oil filter/strainer Part # a 68593 / A68593 New old stock part from closed out dealer Fits Homelite chainsaws super 2, xl, xl2 and some others
Homelite Super 2 + Chainsaw 16" 3/8lp Oregon Bar and Chain Combo 105701 NEW (RDFB)
Oregon 160DGEA061 Chainsaw Bar. Laminated sprocket nose. .050ga 59 Drive links. With Oregon chain. NEW Fits smaller Homelite saws equipped with 3/8 low profile chain. Models including: XL, Super 2, XL-2, XL2, 240, Bandit, Little Red, LX130, LX 130 190 200 180.
Homelite 410 Chainsaw Rubber Isolator Handle Mount UP06458 NEW
One rubber AV anti-vibration tank handle mount bushing UP-06458, 93368 A, 93368A NEW freshly made from OEM producer Fits Homelite 410, 410 SL, 410SL, MP38, MP-38
Homelite 42cc Chainsaw Cylinder Cover
Cylinder top cover 518776 001 In good used shape Fits Homelite 35cc, 42cc UT10586 and others
Homelite Super XL-925 Chainsaw 6-Shoe Clutch Assembly
Clutch assembly with centrifugal clutch mechanism, sprocket, drum and bearing with new rim installed. 67441 657232A 697541 64124 A65990 63284 64129A In good used shape Fits Homelite Super XL-925, 922 944, 955 and others
Homelite Super XL Auto chainsaw bumper spike kit A-59043-A NEW (hm 337)
Bumper spike kit A-59043, a59043 NEW Fits Homelite XL-12, XL12, XL-15, Super XL Automatic, SXL AO and others
Homelite Super 2 Chainsaw Points Type ignition coil 69323 NEW (H-EAD)
Points type ignition coil 69323 NEW Fits Homelite XL-2, XL2, Super 2, xl
Homelite XL-123 Chainsaw tank gasket 65364-a NEW (HOB-O)
Gas tank half with bar studs 65364a NEW old stock part Fits XL123, XL76, XL-76 and many others
Homelite Super XL-925 Chainsaw Clutch Cover 67156-14 NEW (HOB-O)
Drivecase and clutch cover 67156-14 NEW old stock part Fits Super XL 925, SXL-925 and others
Homelite XL-101 Chainsaw Clutch cover 63708 NEW (HAR-D)
Clutch and drivecase cover 63708, A-64619-1, A64619-1 NEW old stock part Fits XL-101 and others
Homelite XL-903 Chainsaw Clutch Cover
Clutch and drivecase cover. Homelite part number 63009-A 63009a In good used shape, minor chips and cracks. May be blue or red. Fits Homelite XL-901 XL-902, XL-903, XL-700, XL800, XL-850 700 800 and others
Homelite Super XL Chainsaw Rim type Clutch Sprocket NEW (63145)sprkt box 11
Clutch drum and rim sprocket. Homelite part numbers: A65990, a-65990, 95058 New AFTERMARKET part Fits later serial number Homelite Super XL Auto, SXL AO, Super XL Automatic, Super XL-12. Ones with the removable bearing and race (not pressed in bearing)
12" Homelite Chainsaw bar 3/8lp A-04761-2
12" chainsaw bar. Includes safe-t-tip. Homelite part number A047612, A-04761-2, A04761-2 New old stock part Fits many smaller homelite chainsaws: XL, Super 2, VI Super 2, 240, Little Red, Bandit, LX-30, 180, 192, 200 classic
homelite xl-925 chainsaw clutch / drivecase cover
Part: clutch drivecase cover Part # 67156-14 Condition: good usable used working order. Has some small hairline cracks Fits: Homelite XL 925
(1 in stock)
homelite 150 chainsaw clutch cover with chain tensioner RED
Part: clutch drivecase cover with chain tensioner adjuster (pin, screw, nut) Part # a-68614, 65175-a, 65112-1, 81206 Condition: good used/working order Fits: Homelite 150 auto
homelite zip chainsaw air filter cover
Part: air filter cover / cap Part # 55494 Condition: good used/working order Fits: Homelite Zip, wiz and others
(2 in stock)
homelite xl-12 chainsaw complete wico flywheel assembly
Part: wico flywheel assembly with screen, starter pawls, spring, studs Condition: good used/working order with no broken fins Fits: Homelite XL 12
Homelite 240 chainsaw bar nut set
Pair of bar nuts In good used shape Fits Homelite 240
Homelite Ranger 33cc chainsaw choke lever
Choke rod. Homelite part number PS06280 In good used shape Fits Homelite 33cc Ranger and many others
homelite super xl 925 chainsaw ignition module, transformer coil and generator coil set
Part: ignition kit - includes the coil core and generator, module and transformer Part # 67163, 67167, 67164-a Condition: good used/working order. Tested and works. Small gauge wire needs a heat shrink tubing repair. Fits: Homelite Super XL-925
(1 in stock)
homelite xl-2 chainsaw points flywheel and starter pawl assembly
Part: points type flywheel rotor 09235 Condition: good used/working shape Fits: Homelite XL 2 models with points systems
homelite ps33, 33cc chainsaw air filter top
Part: air filter top only Part # up04533 Condition: good used/ working order Fits: Homelite PS-33, 33cc chainsaw and many other models
homelite super ez chainsaw starter spring cover, shield and ring
Part: starter rewind spring shield cover, and retaining ring. Does not include the spring, or spring catch. Part # 65095-2, 65107, 65114, 65125 Condition: good used/working shape Fits: Homelite Super EZ, Super EZ Auto Automatic, EZ Auto
homelite 410 chainsaw bucking spike only (no hardware)
Part: spiked bumper Part # a-12272-a Condition: good used/working shape Fits: Homelite 410
(2 in stock)
homelite xl chainsaw muffler assembly type 3
Part: muffler with cover Condition: good used/working shape Fits: some models of homelite xl, XL2, XL-2 (this model of chainsaw came with several different types of mufflers)
homelite xl chainsaw muffler assembly type 2 (without shield)
Part: muffler Condition: good used/working shape Fits: Homelite XL
(1 in stock)
homelite super xl, xl-12 chainsaw starter pulley kit
Part: starter pulley with starter bushing, rewind bushing, screw and washer Part # a-64446, 94827, 64443, 80648, 58763 Condition: good used/working shape Fits: Homelite Super XL, XL-12
homelite 410 chainsaw cylinder
Part: cylinder Condition: good used/working shape Fits:Homelite 410
(1 in stock)
homelite super xl chainsaw cylinder
Part: cylinder Part # a-69714 Condition: good used/working shape. oem. No breaks, good bore. Fits: Homelite Super XL
homelite super ez, super ez 250 chainsaw hdc-1 carburetor
Part: HDC1 carb Condition: good used physical shape, may need a carb rebuild kit Fits: Homelite Super ez 250, Super EZ, Super EZ auto
(1 in stock)
homelite 330 chainsaw fuel cap (with gasket)
Part: fuel cap with cork gasket A94671, A-94671 Condition: good used/working shape Fits: Homelite 330, 330SL and others
homelite super xl, xl-12 chainsaw phelon points ignition coil kit
Part: phelon ignition coil with points, condenser and mounting plate Condition: good used/working shape. tested and makes strong spark Fits: homelite super xl, xl 12
homelite zip chainsaw clutch cover and chain tensioner
Part: clutch sprocket side cover with chain tensioner adjuster Condition: good used/working shape Fits: homelite zip
homelite 410 chainsaw flywheel and starter pawl set
Part: flywheel with starter pawls. PN 93313, 58756, 65375-2 Condition: good used/working shape. No broken fins Fits: homelite 410
homelite c series chainsaw guide bar plate set
Part: set of inner and outer guide bar plates, part # 56871-a, 56872-b Condition: good used/working shape Fits: homelite c-5, c-7, c-9, c-51, c-52, c-91. may also fit other models
homelite super xl chainsaw clutch cover #2
Part: clutch drivecase cover. Part # 58750 Condition: Has a large gouge on front and small hole on side of cover but is in good used/working shape Fits: Homelite Super XL
(1 in stock)
homelite 330 chainsaw starter housing cover only
Part: starter / recoil cover only Condition: good used/working shape Fits: Homelite 330
homelite super xl 925 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring and grip Part # A-64504-B, 63268-A, A-64421, A-64446 Condition: good used/working shape Fits: Homelite Super XL 925 923 and others
homelite 350, 360 chainsaw chainsaw oil pump type 2 (3 O rings)
Part: oil pump oiler with 3 “O” rings Condition: good used/working shape Fits: some models of Homelite 350, 360 (models either have 3 or 4 “O” ring oil pumps so check to see which type your saw is)
homelite zip chainsaw tillotson HL46B carburetor
Part: tillotson HL 46B 46A HL46A carburetor Condition: good used physical shape. May need a carb rebuild kit. Fits: Homelite ZIP
homelite 350, 360 auto chainsaw fuel and oil cap set
Part: set of caps, one oil and one gas Condition: good used/working shape Fits: Homelite 350, 360
homelite xl chainsaw starter recoil cover and pulley assembly #2
Part: starter housing cover with pulley, rewind spring. Condition: good used/working shape Fits: Homelite XL
homelite super xl chainsaw oil pump gear 59675 new (hm-153)
Part: oil pump drive gear. Pn 59675 new old stock part from closed out dealer Fits: Homelite Super XL, XL-925
homelite 240 chainsaw bar/chain tensioner adjuster
Part: chain tensioning screw and adjusting pin. PN 69254-1a, 93575 Condition: good used/working shape Fits: Homelite 240
homelite 150 auto chainsaw rear trigger handle housing half (left side)
Part: rear trigger handle housing tank case half Condition: good used/working shape Fits: Homelite 150 auto
homelite 150 auto chainsaw choke button
Part: choke button with spring Condition: good used/working shape Fits: Homelite 150 auto
homelite super xl, xl-12 chainsaw reed spacer
Part: plastic manifold reed spacer base 59718 Condition: good used/working shape Fits: Homelite Super XL, XL12
homelite 360 chainsaw HDC46 carburetor
Part: HDC 46 carburetor Condition: good used physical shape. May need a carb rebuild kit Fits: Homelite 360 350 series
homelite 350, 360 chainsaw throttle trigger and lock kit
Part: throttle trigger with throttle safety lock and lever Condition: good used/working shape Fits: Homelite 350, 360
(1 in stock)
homelite 330 chainsaw fuel and oil cap set
Part: fuel and oil cap set. PN a-95207 and a-94671 Condition: good used/working shape Fits: Homelite 330
homelite zip and wiz chainsaw 18" .404 pitch bar and chain combo
Part: 18", .404 pitch bar and chain combo Condition: good used/working shape. Chain is 1/2 worn. Fits: Homelite Wiz and Zip
(1 in stock)
homelite 350, 360 chainsaw chainsaw oil pump type 1 (4 O Rings)
Part: oil pump oiler with 4 “O” rings Condition: good used/working shape Fits: some models of Homelite 350, 360 (models either have 3 or 4 “O” ring oil pumps so check to see which type your saw is)
homelite HT17, HT21 + chainsaw trimmer "S" clutch pn 03588-1 new (box 80)
Part: “S” clutch Part # 03588 1 Condition: new old stock part. Never used. May be dusty/dirty/have minor oxidation from years of storage. Fits: Homelite trimmer HT-17, HT-21, HT22, HT19, HX16, HX22 Location: box 80
(2 in stock)
homelite 180, 200, 192 + chainsaw, trimmer & blower walbro ignition coil pn UP03903 / 94711CS
Part: Walbro / Phelon ignition coil Part# UP 03903 superseded by 94711 CS B BS A AS 94711a 94711b Condition: tested good used shape. Fits: fits many Homelite models, including the following: PBP3000 PHB3000 180 PSE3000 Super 2 192 200 BC3000 GST18 HBC18 ST155 ST175 ST285 BP250 HBC30 HLT18 XL 240 ...
homelite super ez chainsaw oil line part # 65137 new (hm-31)
oil line, Part # 65137 New old stock part Fits: Homelite Super EZ
homelite super ez chainsaw shield retaining ring pn 65125 new (bin 76)
Part: shield retaining ring Part # 65125 Condition: new old stock part. May be dusty/dirty from years of storage. Fits: Homelite Super EZ Location: Box 76
homelite super xl, xl-12 chainsaw idle speed adjustment screw
Part: idle speed adjustment screw Condition: good used/working shape Fits: Homelite Super XL, XL12, Super XL Auto Automatic. SXL-AO
(1 in stock)
homelite super xl, xl-12 chainsaw throttle lock latch - early model (metal)
Part: throttle lock pin and spring Condition: good used/working shape Fits: Homelite Super XL, XL12
homelite trimmer ST-285 + starter housing cover pn a-06982 new (loc: hm bin 1000)
Part: starter recoil housing cover only with decals. Part # A06982 Condition: new old stock part, may be dusty/dirty/have minor oxidation from years of storage Fits: Homelite trimmers HBC-30, ST-385, HLT-17C, ST-185, ST-175BC, ST-385C, HBC-30, ST-185C, ST-285, HBC-18 Location: Homelite Bin 1000
homelite 290, 340 chainsaw air filter element kit pn A-98487 new (Loc: HM 1000 bin)
Part: air filter assembly Part # A 98487 (A-98333, bottom & A-98349, top) Condition: new old stock part Fits: Homelite 290 and 340 Location: Homelite Bin 1000
(4 in stock)
homelite super ez chainsaw metal starter pulley
Part: metal pulley. Part number 65094 Condition: good used/working shape Fits: Homelite Super EZ, Super EZ Automatic, EZ Automatic, EZ, SEZ-AO
homelite xl-123 chainsaw bar chain tensioner
Part: chain tensioning screw and adjusting nut Condition: good used/working shape Fits: Homelite XL 123 76 101 102 103 112 114 XL76 XL123 XL101 XL102
Homelite super 240 classic chainsaw starter recoil cover and pulley assembly #1
Part: starter cover with pulley, spring and grip Condition: good used/working shape. Has a broken grill and plastic is faded. Fits: Homelite 240
homelite super ez chainsaw reed valve gasket pn 65014-a new (hm-8424)
Part: gasket Part Number: 65014 a Part Condition: New old stock part. May be dusty/dirty/have minor oxidation from years of storage. Fits: Homelite Super EZ
Homelite 150 Auto Chainsaw ignition Off Switch
Part: Off switch and link Condition: Good used/working shape Fits: Homelite 150 Auto
homelite 360 chainsaw manifold, deflector and carburetor flange
Part: manifold, deflector and carb flange Condition: good used/working shape Fits: Homelite 360 350
homelite 350, 360 chainsaw muffler assembly
Part: muffler assembly Condition: good used/working shape Fits: Homelite 350, 360
homelite 350, 360 chainsaw front adjust bar chain tensioner adjuster
Part: chain tensioner Condition: good used working shape Fits: Homelite 360 and 350
homelite super ez chainsaw air filter bracket and nut pn a-95346 new box 102
Part: air filter nut and bracket Part Number: A95346 Condition: new old stock part- may be dusty/dirty/have rust from years of storage Fits: Homelite Super EZ Location: box 102
homelite c series chainsaw recoil/starter spring
Part: recoil spring Condition: good used/working shape-has some light surface rust Fits: Homelite C-Series chainsaws, such as C-5, C-7, C-9 and others
homelite xl chainsaw ignition off switch type 2-button
Part: ignition off switch button Condition: good used/working shape Fits: Homelite XL
Homelite XL Chainsaw Ignition Off Switch type 1-toggle
Part: Ignition off switch Condition: good used/working condition Fits: Homelite XL
(2 in stock)
Homelite XL Chainsaw Crankshaft, Rod and Bearings
Part: Crankshaft, Rod and Bearings Condition:good used/working shape Fits: Homelite XL
Homelite Super 2 Chainsaw Starter/Recoil Cover Only Type 1
Part: starter cover only-does NOT include any of the internal parts Condition: good used/working shape-has some paint loss Fits: Homelite Super 2
Homelite Super XL, xl-12 Chainsaw Carb Bolt Set & Filter Mount
Part Name: carburetor mounting bracket and screw set. PN a-59822-b, 80921 may vary cosmetically - photos show the types you may receive. Fits the Following Models: Homelite Super XL, XL12 This is a USED part, in good working order.
Homelite Super EZ, XL 925 + Chainsaw Torx Screw 70306
For Homelite Models Part Number: 70306 Part Description: torx screw Fits the Following Models: xl98e/d/a/c, super ez, super ez auto Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Location: Box 10
Homelite LX30 180 + Chainsaw Screw A00440 NEW (bin 4)
For Homelite ChainsawsPart Number: A00440Part Description: screw Fits the Following Models: 180, 192, 200, 240, 240sl, cs3314, cs3916, little red, super 2, super 2 sl, super 2 xl, cs3012Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage.Locat...
Homelite Chainsaw & Trimmer Hex Screw PN 82268 NEW (bin 106)
82268, hex screw Fits the Following Models: Chainsaws: super ez, super ez ao Trimmers: gst, gst18, gstbc, hbc18, hbc30, hgt, hlt15, hlt16, hlt18, hlt17c, hlt28, st145, st155, st175/175c/175bc/175g, st185, st275, st285, st385, hbc30 New old stock part. Never used. Item may be dusty from yea...
Homelite 410 Chainsaw Isolator Pin/ Buffer Screw 93367
Part Number 93367 Fits Homelite 410 models This is a USED part, in good working order.
Homelite 350 360 Chainsaw Flywheel /Rotor PN 12101
Part: flywheel and starter pawls Condition: good used/working shape with no broken fins Fits: Homelite 350/360
Homelite 350 & 360 Chainsaw choke Link
Part: choke link rod Part # 12149-A Condition: good used/working shape Fits: Homelite 350, 360
Homelite 330 Chainsaw Muffler w/Bolts (type for units prior to lot #c201)
Part: muffler & bolts Condition: good used, working shape Fits: Homelelite 330
(2 in stock)
Homelite 150 Chainsaw Carburetor Spacer PN 68537 NEW (bin 106)
For Homelite Chainsaws Part Number: 68537 Part Description: carburetor spacer Fits the Following Models: 150, 150e, 150w Detailed Condition Description: New old stock part. Never used. Item may be dusty from years of storage. Box: 106
Homelite 150 Auto Chainsaw Top Front Handle Bar
Part Name: metal only (no rubber gripping) top front handle bar. PN a-68599-1 Condition Description: good used shape, not cracked or bent Fits the Following Models: Homelite 150 Auto This is a USED part, in good working order.
Homelite Chainsaw Fuel Filter NEW 64083 (HM-1531)
fuel filter. 64083 new part from old dealer stock fits Super XL, Super XL Auto, Super XL 925 190 350 and some other 20models of Homelite chainsaws
Homelite Super XL 925 Chainsaw Oil Pump Button NEW 63622 (HM-1215)
oil pump button. 63622 new part from old dealer stock fits Homelite Super XL 925 chainsaw models