Homelite 330 Chainsaw Hardware kit
Hardware kit. Screws, etc. In good used shape Fits Homelite 330 and others
Homelite XL-12 Chainsaw Muffler body chrome
Muffler body only In good used shape Fits older Homelite Super XL, XL Auto, XL-12
Homelite XL-98D Cut-off Saw Reed Valve Intake Assembly
4-Petal reed intake assembly with reeds, cage, and intake block In good used shape. Fits Homelite XL98, XL98d, XL 98 D power cut saws
Homelite Super EZ Chainsaw Carburetor Bolt Set
Carb bolt set with lock washers. Homelite part number: 82165 In good used shape Fits Homelite EZ Auto, SEZ, Super EZ Auto and others
homelite xl-101, xl-102 chainsaw windsor clutch spur sprocket new HO 181A7 (box 9)
Part: windsor clutch spur sprocket and bearing. 3/8" pitch 7 tooth Windsor Part # HO181-a7, n181-a7 Condition: new Fits: Homelite XL 101, XL 102 with 7/16" shaft 1968 year and on Box 9
homelite XL-12 chainsaw piston and cylinder kit
Part: piston and cylinder with rings and pin. Homelite part numbers: A69715, A58903C, 58877. Condition: good used/working shape. Came off a saw with good compression, no breaks. Fits: Homelite XL-12
homelite xl mini, sxl mini chainsaw herr 3/8-7 spur sprocket drum and bearing new pn n150-a7
Part: 3/8" pitch x 7T spur sprocket drum for the clutch Herr Part # N150 A7 Condition: new Fits: some models of Homelite xl mini, super xl mini ao, al10 prior to sept '69 (2-3/4" clutch, 9/16" shaft)
homelite 240 chainsaw ignition coil module with lamination (orange)
Part: wabash walbro ignition coil module and lamination Part # 94711-a Condition: tested and in good used/working order Fits: some models of Homelite 240
homelite 350, 360 chainsaw air filter grommet
Part: grommet for the air filter Condition: good used/working order Fits: Homelite 350, 360
homelite 330 chainsaw clutch 3/8"x7T spur sprocket drum
Part: 3/8" pitch 7T spur sprocket drum for the clutch Part # HO182A7/ replaces Homelite PN a-95621 Fits: Homelite 330
homelite super xl chainsaw lot of assorted hardware #1
Part: lot of misc. hardware - choke, grommet, bolts/screws, washer (includes everything pictured) Condition: good used/working order Fits: Homelite Super XL
homelite xl-400 chainsaw clutch cover
Part: drivecase clutch cover Part #58750-2 Condition: good used/working order Fits: Homelite XL 400
homelite xl-2 chainsaw rear handle cover with throttle trigger kit
Part: rear handle cover with throttle lever, rod and spring, front and rear trigger Condition: good used/working order Fits: Homelite XL 2 and some other models
Homelite 300 Classic, CS-50 Chainsaw Ignition Coil
Ignition coil. Homelite part number A01546 In tested good used shape Fits Homelite 300 Classic, CS-50, CS-40 and others
homelite c-5, c-7, c-9 chainsaw 6 shoe, .404-7 spur sprocket clutch assembly
Part: clutch assembly, includes .404x7T spur sprocket drum with threaded 6 shoe clutch mechanism and washers Condition: good used/working order: Fits: some models of c5, c7 and c9
homelite xl-102, xl-103, xl-104 chainsaw clutch/drivecase cover and tensioner
Part: drivecase cover with chain tensioner adjuster screw, nut and pin Part #s a-64620-1, 65944, 81211, 65768-1 Condition: good used/working order, has a minor hairline crack beginning but not going all the way through around the tensioner screw opening Fits: Homelite XL 102, 103 and 104
homelite c-91 chainsaw air filter cover
Part: air filter / cleaner cover Part # 59230 Condition: good used/working order Fits: Homelite C 91
homelite 330 chainsaw connector intake boot 93838B
Part: intake connector boot Part # 93838 B Condition: good used shape Fits: Homelite 330
Homelite Super XL Chainsaw Top Handle Bar (with gripping)
Part: top handle bar Condition: good used/working shape-not cracked or bent Fits: Homelite Super XL
homelite zip chainsaw starter cup and screen
Part: starter cup screen, washers, 56441 Condition: has some wear but is in working/usable order Fits: Homelite Zip
homelite xl-2 chainsaw throttle trigger kit
Part: throttle lever, front and rear trigger, rod and spring Condition: good used/working order Fits: Homelite XL 2
homelite 480cd chainsaw top cover
Part:top cover engine shroud Part # 501 61 40-01 Condition: break on top/back of cover and hairline cracking on front corner of cover, in usable order Fits: Husqvarna 480 cd
homelite super xl chainsaw oil pump and gear (late model, plastic)
Part: oil pump oiler with gear Condition: good used/working order Fits: late model (newer) models of Homelite Super XL with plastic pumps
homelite 410 chainsaw lot of assorted hardware
Part: lot of misc. hardware - bar stud / bolt set, screws (includes everything pictured) Part # 93310 +++ Condition: good used/working order Fits: Homelite 410
homelite 450 chainsaw rear throttle handle kit
Part: rear handle housing with grip, throttle handle cover, manual oiler, throttle latch, throttle link, throttle trigger, choke lever Part #s a-70287-1, 70019-a, a-68061-a, 12350, 12464-1, 1235212620 Condition: good used/working order Fits: Homelite 450
homelite lx30 bandit chainsaw zama c1q-h17c carburetor (for built in oil pumps)
Part: zama c1q H17C carburetor Condition: good used physical shape, may need a carb rebuild kit Fits: Homelite LX-30 Bandit chainsaw with built in oil pumps
(3 in stock)
Homelite 35cc chainsaw Ruixing carb
Rui x ing carb. Homelite part number 309362001 Good used shape Fits 35cc, 38cc, 42cc Homelites equipped with Ruixing carburetor
homelite xl-400 chainsaw rear trigger handle assembly
Part: rear trigger handle housing with throttle trigger, oil button, throttle link, throttle latch button Condition: good used/working order Location: Homelite XL 400
(1 in stock)
homelite xl30 bandit chainsaw complete starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring, grip Part # a-01573, a-97908, 97768-a Condition: good used/working order May be Red or Black Fits: Homelite LX 30 Bandit
homelite super ez chainsaw flywheel starter pawl, stud and spring set
Part: set of starter pawls, spring and studs for the flywheel Part # 65108, 65109, 65120 Condition: good used/working order Fits: Homelite Super EZ
homelite e-z chainsaw rear trigger handle kit
Part: rear throttle handle housing with chain oiler button, throttle link, grommets, throttle trigger, spring Condition: good used/working order Fits: Homelite EZ / E-Z
homelite 360 auto chainsaw starter cover with emblem, rewind spring and lock
Part: starter cover, emblem, lock, rewind spring, and shield Part #s 70838, 65102, 65107, 12052, 12523 Condition: good used/working order Fits: Homelite 360 ao
homelite xl-12 chainsaw old model 3/8-7 clutch rim sprocket drum
Part: 3/8-7 rim sprocket drum and bearing with a new replacement rim ; Oregon brand Condition: good used/working order, no wear on teeth Fits: some older (early) models of Homelite XL 12
homelite c-72 chainsaw throttle trigger
Part: throttle trigger with spring and shaft Part # 58181-a, 58353,58352-a Condition: good used/working order Fits: Homelite C72 / C 72
(3 in stock)
homelite xl-98 saw clutch drivecase cover
Part: clutch drivecase cover Part # 53579 Condition: some small chips, in good used/working order Fits: Homelite XL 98 multipurpose/cut off saw
homelite xl mini automatic chainsaw clutch drivecase cover
Part: clutch / drivecase cover Condition: good used/working order Fits: Homelite xl mini auto
Homelite MP38 powercut saw air filter element cover
Part: Inner filter element cover Part # 023091 Condition: good used shape Fits: MP 38 Homelite cut off saw
Homelite MP38 powercut saw air intake adaptor
Part: Intake adaptor, with carb bolts and foam gasket Part # A03272, 02302 Condition: good used shape Fits: MP 38 Homelite cut off saw
Homelite 5-30 chainsaw 8 tooth drive sprocket kit
8 tooth chain drive sprocket with washers and nuts In good used shape Fits homelite 5-30 and many others.
Homelite 5-30 chainsaw belt drive cover with gasket
Belt drive cover and gasket. Homelite part number 73046, 73046a In good used shape Fits homelite 5-30 and many others.
Homelite MP38 powercut saw air filter cover
Part: Top air filter cover with knob Part # A03880, A03024 Condition: good used shape Fits: MP 38 Homelite cut off saw
homelite 330 chainsaw muffler only (type for units prior to lot #c201)
Part: muffler Condition: good used/working order Fits: Homelite 330
homelite xl-123 chainsaw bar plate set
Part: set of inner and outer bar plates Condition: good used/working order Fits: Homelite XL 123
homelite xl-123 chainsaw starter pawl, spring and stud set
Part: set of studs, spring and pawls for the flywheel Part # 64442, 58758-2, 63877 Condition: good used/working order Fits: Homelite XL 123
homelite 330 chainsaw lot of misc. hardware #2
Part: lot of assorted hardware - screws, bolts off of a Homelite 330 Condition: good used/working order
homelite c-72 chainsaw bar nut and washer set
Part: set of bar nuts and washers Part # 81089-2 Condition: good used/working order Fits: Homelite C72
(1 in stock)
homelite 330 chainsaw starter pulley and ratchet set
Part: starter pulley drum with ratchet Part # 94383-a, 94384 Condition: good used/working order Fits: Homelite 330
homelite c-5, c-7, c-9 chainsaw starter friction shoe with spring and washers
Part: friction shoe with hardware pictured for the starter Part # a-57647, 56455 + Condition: good used/working order Fits: Homelite c5, c7, c9
homelite 410 chainsaw throttle rod
Part: throttle rod link Part # 93371-a Condition: good used/working order Fits: Homelite 410
(1 in stock)
Homelite 410 chainsaw muffler assembly #3
Part: muffler body, plate, spacers, spacer plate, cover, Part # 93347, 93348-1a, 93349 + Condition: good used/working order Fits: Homelite 410
homelite 410 chainsaw intake connector boot with plate and spacer
Part: carburetor connector / intake manifold boot with plate and spacer Part # 97623-1, 97622-a, 93327 Condition: good used/working order Fits: Homelite 410
homelite super xl 922 chainsaw complete starter recoil cover and pulley assembly
PART: complete starter assembly- includes the housing, pulley drum, rewind spring and grip CONDITION: good used/working order FITS: Homelite Super-xl 922
(1 in stock)
homelite 300 classic chainsaw choke rod
PART: choke rod pull PART # 02262 CONDITION: good used/working order FITS: Homelite 300 classic, cs 50
(2 in stock)
homelite 240 chainsaw intake manifold and hardware
Part: reed intake manifold with screws and washers Part # 94872-1, 96540, 96539, 82291 Condition: good used/working order Fits: Homelite 240
homelite xl-76 chainsaw guide bar plate set
Part: set of inner and outer bar plates with spring holder Condition: have some wear, in good used/working order Fits: Homelite XL 76
Homelite XL-76 Chainsaw Drivecase Cover Assembly
Clutch cover, with chain tensioner In good used shape Fits Homelite XL76 and others.
Homelite XL-76 Chainsaw Muffler Assembly
Muffler assembly with baffle and bolts In good used shape Fits homelite XL 76, XL-123, and others
homelite 330 chainsaw guide bar adjusting pin pn 65112-1
Part: pin for the tensioner Part # 65112-1 Condition: good used/working order Fits: Homelite 330
homelite 330 chainsaw guide bar adjusting screw pn 65175-a
Part: tensioner screw Part # 65175 a Condition: good used/working order Fits: Homelite 330
homelite super ez chainsaw clutch plate washer
Part: clutch plate Condition: good used/working order Fits: homelite super ez
homelite xl-2 chainsaw points and condenser
Part: points with condenser Condition: good used/working shape Fits: Homelite XL 2
Homelite 330 Chainsaw Chainbrake Kit
Chain brake, chain guard kit In good used shape Includes brake band, hand guard brake handle, dust shield, and an assortment of the hardware to install it.
(1 in stock)
homelite 33cc, ranger chainsaw handle cover with throttle trigger and lockout kit
Part: rear handle kit with throttle trigger, safety lockout interlock and throttle pin lock Condition: good used/working order Fits: Homelite 33cc Ranger
homelite 410 chainsaw muffler front cap only
Part: muffler exhaust cap Part # a-93355-a Condition: good used/working shape Fits: Homelite 410
(1 in stock)
homelite 240 chainsaw muffler assembly (prior to lot d200)
Part: muffler. Part # 94887, 94886, 94888, 95637, 93983-07 Condition: good used/working order Fits: some models of Homelite 240
(1 in stock)
homelite 290, 340 chainsaw muffler only (type with front spark arrestor)
Part: muffler with front spark arrestor Condition: good used/working order Fits: Homelite 290, 340
homelite 340, 290 chainsaw muffler only (non spark arrestor type)
Part: muffler, not equipped to take a spark arrestor Condition: good used/working order Fits: Homelite 290, 340
homelite 240 chainsaw muffler baffle, spark arrestor and spacers
Part: spark arrestor screen, spacer set and baffle Part # 94888, 93983-07, 95637 Condition: good used/working shape Fits: Homelite 240 chainsaw models prior to lot D200
homelite xl-76 chainsaw starter recoil cover and pulley assembly
Part: starter housing cover with pulley, rewind spring and grip Condition: good used/working order Fits: Homelite XL 76
homelite xl, super 2 chainsaw set of 4 screws for the engine case
Part: screw, set of 4 for the engine housing case Part # 88063 Condition: good used/working order Fits: Homelite xl, super 2
homelite 26lcs chainsaw clutch mechanism assembly
Part: clutch mechanism - includes the shoes, carrier / rotor, spring and keys Condition: good used/working order Fits: Homelite 26lcs
homelite 33cc ranger chainsaw rear trigger handle kit
Part: rear trigger handle with 2 av spring isolator mounts, throttle trigger, safety lever interlock, throttle cable Condition: good used/working shape Fits: Homelite 33cc and some other Homelite models
homelite super xl, xl-12 chainsaw muffler cover front only
Part: muffler cover Part # a-93982 Condition: good used/working order Fits: Homelite Super XL, XL 12
homelite xl chainsaw muffler body only
Part: muffler body Part # 93986 Condition: good used/working order Fits: Homelite XL, Super 2
homelite xl-98 multi purpose saw back plate
Part: back plate housing with loose roller bearings Part # 96728-a Condition: good used/working shape Fits: some models of Homelite XL98 / XL 98 multi purpose saws
homelite xl-98d multi purpose saw air filter cover and knob
Part: air filter cover and knob Condition: good used/working shape, rusty Fits: Homelite XL 98 saw
homelite xl-901, xl-903, xl-904 chainsaw air filter cover and knob
Part: air filter cover and cover mounting nut Part # 63684-1 and a-63582-a Condition: good used/working shape. A few of the prongs on the backside are chipped. Fits: Homelite xl 903, 901, 904
homelite xl-12 chainsaw crankshaft and connecting rod
Part: crank shaft, connecting rod, wrist pin, and woodruff key Part # 63497-1, a-63477-b Condition: good used/woking shape Fits: Homelite XL 12
homelite 192 chainsaw ignition off switch
Part: off switch Condition: good used/working shape Fits: Homelite 192
homelite 330 chainsaw lot of assorted hardware #3
Part: lot of misc. hardware- screws, bolts, gaskets, grommet 94381 (includes everything pictured) Condition: good used/working shape Fits: Homelite 330
(2 in stock)
homelite 23av, 27av chainsaw fuel cap
Part: fuel / gas tank cap Condition: good used/working shape Fits: Homelite 23 and 27 av
homelite 450 chainsaw top handle bar
Part: flush cut handlebar. PN a-12342-a Condition: good used/working order Fits: Homelite 450
homelite xl chainsaw orange walbash ignition coil for electronic systems
Part: walbash ignition coil for models which have electronic systems Condition: tested and in good used/working order Fits: some models of Homelite XL
homelite 450 chainsaw oil pump plunger and cover
Part: oil pump plunger and cover Part # a-12356-a, a-70374 Condition: good used/working shape Fits: Homelite 450
homelite 450 chainsaw lot of assorted hardware
Part: lot of misc. hardware- screws, bolts, washers, nuts (includes everything pictured) Condition: good used/working shape Fits: Homelite 450
homelite 450 chainsaw complete clutch assembly (without lined shoes)
Part: 3/8-8 clutch assembly - includes the sprocket drum, mechanism (shoes, springs, carrier), bearing, race and washers Condition: good used/working shape Fits: Homelite 450
homelite 450 chainsaw piston, cylinder and crankshaft assembly
Part: cylinder, piston, crank shaft, connecting rod, rings Part # a-70056-a, 12309 Condition: good used/working shape. No breaks, good compression. Fits: Homelite 450
homelite 340 chainsaw piston with crankshaft
Part: piston and ring with crank shaft and connecting rod Part # a-98189 Condition: good used/working shape Fits: Homelite 340
homelite xl, super 2, 180, 200, 192 chainsaw air filter housing box (xl bin)
Part: air filter housing with screws Part # 02491-a Condition: good used/working shape Fits: Homelite XL, Super 2, 192, 200, 180
homelite xl chainsaw 3/8 LP clutch sprocket assembly
Part: clutch- includes 3/8 LP spur sprocket, mechanism (shoes, springs, carrier), nut, washers and loose needle bearings for the sprocket Condition: good used/working shape Fits: some Homelite XL models
(1 in stock)
homelite super ez chainsaw flywheel assembly type 3 phelon for electronic
Part: phelon flywheel and starter pawls for electronic systems. Part # 95218-as Condition: good used/working shape Fits: some models of Homelite Super EZ
homelite super xl, xl-12 chainsaw black fuel cap #1 no gasket
Part: fuel/ gas cap, does NOT include/is missing the gasket Condition: good used/working shape Fits: some earlier models of Homelite Super XL, XL-12 chainsaws
homelite xl-101 chainsaw cylinder
Part: cylinder. Part # 63165 / 63165-a Condition: good used/working shape. Good bore, no breaks. Fits: Homelite XL 101
homelite 450 chainsaw cylinder
Part: cylinder Condition: good used/working shape, good bore/no breaks Fits: Homelite 450
homelite 450 chainsaw crankcase and cylinder assembly
Part: crank case and cylinder with deflector, guide bar bolts. Part # a-70055-b Condition: one of the fins has a break as pictured. In working/usable condition Fits: Homelite 450
homelite 360 chainsaw cylinder #2
Part: cylinder Condition: one of the fins has a break as pictured, in usable/working order Fits: Homelite 360
(1 in stock)
homelite 46cc, pro 4620c chainsaw crankshaft assembly
Part: crank shaft with connecting rod Condition: good used/working shape Fits: Homelite 46cc, pro 4620 C
homelite pro 4620c, 46cc chainsaw cylinder
Part: cylinder Condition: good used/working shape. No breaks, good bore Fits: Homelite pro 4620 c, 46cc
homelite 33cc ranger chainsaw piston and crankshaft #1 with ring
Part: piston with crank shaft, connecting rod and engine pan Condition: good used/working shape Fits: Homelite 33cc Ranger